Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

GYM EQUIPMENT

Active

W911S226U3995Federal

Response Deadline08/18/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract for gym equipment is issued under solicitation number W911S26U3995 by the Department of Defense through the Office of W6QM Micc-Ft Drum, located in Fort Drum, New York, with a zip code of 13602-5220. This is a combined solicitation set aside exclusively for small businesses as defined by the SBA, with the NAICS code 339920 indicating it falls under other miscellaneous manufacturing. The opportunity was posted on August 7, 2026, and responses are due by August 18, 2026, at 1:00 PM Eastern Time. The place of performance is listed with a zip code of 65473, though specific city and state details are not provided. Primary point of contact for inquiries is Samantha Hooker, reachable via email at samantha.a.hooker.civ@army.mil or by phone at 573-596-6877. All submissions must be made through the official SAM.gov portal linked in the solicitation.

General Info

Small business set-aside for gym equipment under DoD solicitation W911S26U3995, due August 18, 2026.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

339920 - Sporting and Athletic Goods ManufacturingView NAICS

Place of Performance

FORT LEONARD WOOD MO, NY, 65473

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 7

Combined Synopsis

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 01:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / Agency

Department Of Defense → W6QM Micc-Ft Drum

View Agency Profile

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Samantha Hooker

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

GYM EQUIPMENT

Similar Contracts

Same NAICS industry code

Traffic Signage and Pavement Marking

Texas Department of Transportation

POSTED

about 15 hours ago

DEADLINE

Science Lab & Vocational Area Furniture Supply

POSTED

about 18 hours ago

DEADLINE

Training Aids and Equipment SupplyThe contract titled Training Aids and Equipment Supply is a subcontract under a Small Business Set Aside, categorized under NAICS code 339920, reserved exclusively for small businesses. It requires the provision of specialized training aids including wildlife scent samples, concealment devices, and secure storage solutions, all of which must fully comply with the standards outlined in WICP Manual Section 8.2. The opportunity was posted on August 7, 2026, with responses due by August 21, 2026, at 4:00 p.m., and it is issued by the Fws Sat Team 3 within the Department of the Interior. The place of performance and organizational details are not specified, and no point of contact is listed, though the full solicitation details can be accessed through the provided SAM.gov link.

POSTED

about 19 hours ago

DEADLINE

Supply of Hardwire FBI Stand Alone Type III+ 10.25x13.25 SAPI Plates

Gwinnett County Government

POSTED

DEADLINE

Supply of Hardwire FBI Stand Alone Type III+ 9.5x12.5 SAPI Plates

Gwinnett County Government

POSTED

DEADLINE

Supply of Hardwire FBI Stand Alone Type III+ 8.75x11.75 SAPI Plates

Gwinnett County Government

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – Toolroom (CLIN 05D-1)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – AO Flyaway Box (CLIN 230-1)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – Mech Roll-Away (CLIN 310-2)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – Flight Equipment Roll-Away (CLIN 130-2)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – Maintenance Box (CLIN 120-5)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Tool Box Manufacturing and Configuration – Airframes Roll-Away (CLIN 120-1)

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Solicitation # W911S226U3984

The U.S. Department of Defense, through the W6QM Micc-Ft Drum office located in Fort Drum, New York, has issued a combined solicitation for refrigerators under the Small Business Set Aside - Total program, specifically targeting small businesses as defined by the SBA. The procurement is classified under NAICS code 335220, which pertains to household appliance manufacturing, and the contract opportunity was posted on August 7, 2026, with a response deadline of August 13, 2026, at 12:10 PM Eastern Time. While the primary office is in Fort Drum, the place of performance is designated with a ZIP code of 31314, indicating the goods may be delivered to a location in Georgia. Charlie Hughes serves as the primary point of contact, reachable via email at charlie.d.hughes.civ@army.mil or by phone at 571-801-2263 for inquiries related to the solicitation. The opportunity is accessible online through the SAM.gov portal for authorized vendors seeking to submit proposals.

Major Household Appliance Manufacturing

POSTED

about 19 hours ago

DEADLINE

Draper Inc. Backstop Repair on Fort Drum, NY

Solicitation # W911S226QA088

The solicitation W911S226QA088 seeks qualified vendors to perform repair services on basketball backstops located at Fort Drum, NY, specifically requiring proof of being an approved sales and service vendor for Draper Inc. Proposals must be submitted electronically through the PIEE Solicitation Module, with a designated Proposal Manager responsible for posting the quote and managing communications. Interested parties must verify their vendor status with Draper Inc. as a prerequisite to submission. All questions regarding the solicitation must be submitted by Friday, August 14, 2026, at 11:00 AM Eastern Time, and responses are due by August 21, 2026, at 3:00 PM Eastern Time. This is a Small Business Set Aside, total, under NAICS code 811490, and is managed by the Department of Defense through the W6QM Micc-Ft Drum office. The primary point of contact for inquiries is Mary Summerlin, reachable at mary.e.summerlin3.civ@army.mil. Training and guidance on using the PIEE system, including role setup and submission procedures, are available through the designated web-based training portal.

Other Personal and Household Goods Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3980

The contract requires the procurement of a Bobcat Toolcat UW56 or equal utility work machine featuring a 61-horsepower turbo diesel engine and an operating weight between 5,800 and 6,000 pounds. It must be equipped with a fully hydrostatic transmission offering high and low range, achieving a top speed of 18 miles per hour, along with full-time all-wheel drive, limited slip differentials, and an all-wheel steer system. The enclosed cab must meet ROPS and FOPS standards, include heating and air conditioning, sound reduction features, front windshield wipers, an AM/FM radio with weather band, a backup camera, horn, exterior mirrors, and a keyless start system. The machine must have 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel tank. Hydraulic capabilities include auxiliary hydraulics at 18 gallons per minute, high-flow hydraulics at 27 gallons per minute, pressure-relieved hydraulic remotes, and a 7-pin electric attachment control kit. It must include joystick controls for implements, a skid steer style coupler, a hydraulic attachment changing system, a 62-inch dirt bucket with steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower requiring high-flow hydraulics, a hydraulic dump box with a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The delivery must include all parts, operators, and service manuals, a scannable unique identification label, onsite operator training, and the machine must be delivered to Fort Drum, NY. The solicitation number is W911S226U3980, with a response deadline of August 14, 2026, and is designated as a Small Business Set Aside under NAICS code 423490, managed by the Department of Defense at Fort Drum, NY.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3919

Rail spanners must meet strict dimensional and structural requirements including a minimum length of 72 inches and width of 24 inches with a maximum thickness of 4 inches. Each spanner must weigh at least 78 pounds individually and support a minimum load of 20,000 pounds per unit or 40,000 pounds per pair or axle, with a failure strength threshold of at least 80,000 pounds for a pair before any permanent aluminum deformation occurs, ensuring a minimum 2-to-1 safety factor. The structural frame requires tubing sized between 3 inch by 3 inch and 4 inch by 4 inch, with a top surface featuring no more than 2 inch wide high-traction rungs spaced no more than 4 inches apart to allow chain and strap routing while permitting debris to fall through. A reinforced kickplate is required on one side for stable placement on flat surfaces, and each end must include a minimum 12 inch heavy duty reinforced stub toe tapering to a 2 inch blunt end, explicitly prohibiting knife edges. Every spanner must be permanently etched with its part number and rated capacity. The solicitation is for a Small Business Set Aside under NAICS code 336510, issued by the Department of Defense through the Fort Drum office in New York, with responses due by August 14, 2026. The point of contact is Valarie Wright, reachable by phone and email provided.

Railroad Rolling Stock Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3965

The contract is for the procurement of GEM electric passenger vehicles, each configured to seat six individuals, under solicitation number W911S226U3965. The opportunity is designated as a Small Business Set Aside, fully reserved for small businesses, and falls under NAICS code 423110, which pertains to motor vehicle parts and accessories merchant wholesalers. The solicitation was posted on August 7, 2026, with responses due by August 14, 2026, at 10:00 p.m. Eastern Time. The issuing agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located at Fort Drum, New York, with the place of performance listed as 10996. Primary point of contact for inquiries is Paul Maxwell, reachable via email at paul.maxwell@westpoint.edu or phone at 845-938-2845. The contract is categorized as combined, indicating potential for both purchase and service components, and can be accessed through the official SAM.gov portal.

Automobile and Other Motor Vehicle Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Snow Plow System - Ford F250 2026 Model Year

Solicitation # W911S226U3977

The contract is for the supply of a snow plow system specifically designed for the 2026 model year Ford F250, with all items required to be delivered to the end user location at zip code 76544. The solicitation, numbered W911S226U3977, was posted on August 7, 2026, and responses are due by August 14, 2026, at 2:15 PM Eastern Time. This is a combined solicitation under a Small Business Set Aside, meaning only small businesses may qualify to bid, and the North American Industry Classification System code 336390 applies to other transportation equipment manufacturing. The contracting office is the Department of Defense, specifically the W6QM Micc-Ft Drum located at Fort Drum, New York, and the primary point of contact is Arthur West, reachable by phone at 254-287-1574 or email at arthur.j.west2.civ@army.mil. All proposals must fully comply with the technical requirements outlined in the attached documentation to be considered responsive.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

Crash Barrier System

Solicitation # W911S226U3982

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for a Crash Barrier System under solicitation number W911S226U3982, which was posted on August 7, 2026, with a response deadline of August 14, 2026, at 3:15 PM Eastern Time. This contract is classified as a combined action and is exclusively reserved for small businesses under a total small business set aside, with the NAICS code 332999 indicating it pertains to other miscellaneous fabricated metal product manufacturing. The place of performance is listed with a ZIP code of 54656, though specific city and state details are not provided, and the primary point of contact is Kevin Nelson, reachable at 502-898-2418 or kevin.a.nelson.civ@army.mil. The contracting office is located at Fort Drum, New York, with a ZIP code of 13602-5220, and the procurement is managed by the military installation at Fort Drum under the broader authority of the Department of Defense. All interested parties must submit responses via the SAM.gov portal linked in the solicitation details.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3987

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for golf carts under solicitation number W911S226U3987, which is classified as a combined solicitation with a Small Business Set Aside designation, exclusively reserved for small businesses. The requirement falls under NAICS code 336999, covering other transportation equipment manufacturing, and the contract is open to qualified small business entities competing for a total set-aside award. Proposals must be submitted by the deadline of August 14, 2026, at 9:50 p.m. Eastern Time, following the posting date of August 7, 2026. The place of performance is listed with a zip code of 36362, though specific city and state details are not provided, and contract performance may involve delivery to multiple military installations under the jurisdiction of Fort Drum, New York. The primary point of contact for inquiries is Shirley Link, reachable via email at shirley.link.civ@army.mil or phone at 334-255-0985, and all submissions and communications should reference the official SAM.gov workspace link associated with this opportunity.

All Other Transportation Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

12 AWG SHIELDED WIRE

Solicitation # W911S226U3983

The contract solicitation is for 12 AWG shielded wire under solicitation number W911S26U3983, posted on August 7, 2026, with responses due by August 14, 2026, at 2:30 PM ET. It is a combined contract action set aside exclusively for small businesses as defined by the SBA, with the NAICS code 335929 indicating classification under other electrical equipment and component manufacturing. The awarding agency is the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a zip code of 13602-5220. The place of performance is listed with a zip code of 74501, though no specific city or state is provided. The primary point of contact for inquiries is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or phone at 918-420-6517. The full solicitation can be viewed online through the SAM.gov portal.

Other Communication and Energy Wire Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3981

The Bobcat Toolcat UW56 must be equipped with a 61-horsepower turbo diesel engine and weigh between 5,800 and 6,000 pounds, featuring a fully hydrostatic transmission with high and low range, a top speed of 18 miles per hour, full-time all-wheel drive, limited slip differentials, and an all-wheel steer system. The machine must have a fully enclosed ROPS and FOPS certified cab with heating and air conditioning, sound reduction technology, front windshield wipers, an AM/FM radio with weather band, a backup camera, a horn, exterior mirrors, and a keyless start system. It must include 4-wheel independent suspension, 27x10.5-15 8-ply deep lug tires, a backup alarm, a beacon, front and rear work lights, road lighting, and a minimum 20-gallon fuel tank. Hydraulic capabilities require auxiliary hydraulics at 18 gallons per minute, high-flow hydraulics at 27 gallons per minute, pressure-relieved hydraulic remotes, and a 7-pin electric attachment control kit, along with joystick controls for implements and a skid steer style coupler with a hydraulic quick-change system. The machine must come with a 62-inch dirt bucket featuring a steel bolt-on cutting edge and side cutters, a 72-inch front-mount 2-stage snowblower dependent on high-flow hydraulics, a hydraulic dump box with a 2,000-pound lift capacity, and a 2-inch receiver trailer hitch. The procurement includes all parts and service manuals, a scannable unique identification label, onsite operator training, and delivery to Fort Drum, NY. This solicitation is a Small Business Set Aside under NAICS code 333618, issued by the Department of Defense via W6QM Micc-Ft Drum, with proposals due by August 14, 2026.

Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3991

The contract is for the provision of a sound system to support the DIV Level ceremony at Fort Drum, New York, under solicitation number W911S226U3991. It is classified as a combined solicitation with a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 339992 indicates it falls under Other Miscellaneous Manufacturing. The contract is managed by the Department of Defense through the W6QM Micc-Ft Drum office, with the primary point of contact being Steven Bekiesz, reachable via phone at 315-772-6155 or email at steven.j.bekiesz.mil@army.mil. The solicitation was posted on August 7, 2026, with a response deadline of August 14, 2026, at 6:00 PM Eastern Time. Performance will occur at Fort Drum, with a zip code of 13602, and the contract aims to equip the event with a reliable audio system tailored to the requirements of a Division-level military ceremony.

Musical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # W911S226U3985

The contract, titled TABLE, is a combined solicitation issued under solicitation number W911S26U3985 with a response deadline of August 13, 2026 at 3:00 PM ET. It is designated as a Small Business Set Aside - Total under NAICS code 335220, which pertains to the manufacture of lighting fixtures and lamps, and is exclusively open to small businesses. The contracting office is the W6QM Micc-Ft Drum, a component of the Department of Defense, located at Fort Drum, New York, with the primary point of contact being Charlie Hughes, reachable via phone at 571-801-2263 or email at charlie.d.hughes.civ@army.mil. The place of performance is listed with a zip code of 31314, though specific city and state details are not provided. All proposals must be submitted through the designated SAM.gov portal prior to the deadline to be considered.

Major Household Appliance Manufacturing

POSTED

about 19 hours ago

DEADLINE