Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Gypsum Board (Drywall) Installation and Finishing

Active

Federal

Response Deadline08/14/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation and finishing of new gypsum board drywall to replace existing removed paneling, encompassing all phases of the work including hanging, taping, mudding, and sanding to achieve a smooth, finished surface. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 238310 clearly identifying it as a drywall and insulation contracting project. The work is to be performed in Escalante, Utah, with a zip code of 84726, and is being procured by the Dixie National Forest under the U.S. Department of Agriculture. The solicitation was posted on July 23, 2026, and responses are due by August 14, 2026, at 11:00 PM Eastern Time. The procurement is exclusively open to small businesses, ensuring competitiveness within the small business community. There is no specified point of contact listed, and the physical location details are limited to the place of performance, with no additional address information provided for the agency office. Interested parties must access the full solicitation through the official SAM.gov link to review additional requirements, technical specifications, and submission instructions.

General Info

Install gypsum drywall in Escalante, Utah, exclusively for small businesses under USDA Dixie National Forest.

Agency

Department Of Agriculture → Dixie National ForestView Agency

NAICS

238310 - Drywall and Insulation ContractorsView NAICS

Place of Performance

Escalante, UT, 84726, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 11:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → Dixie National Forest

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → Dixie National Forest

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of new drywall to replace removed paneling, including hanging, taping, mudding, and sanding.

Similar Contracts

Same NAICS industry code

Drywall and Partition InstallationThe contract pertains to the installation of new drywall partitions, ceiling systems, and wall finishes for the reconfiguration of office space under a subcontract agreement. The work is linked to the North American Industry Classification System code 238310, indicating it falls under drywall and insulation contracting services. The solicitation was posted on July 25, 2026, with a response deadline of August 17, 2026, at 7:00 PM, providing potential bidders approximately four weeks to submit proposals. The project is being managed by the Ministry of Water, Environment and Climate Change under the Government of Jamaica, though specific details regarding the location of the work, point of contact, or set-aside provisions are not provided. The contract is accessible via a public portal linked to the Jamaica E-Procurement System, which may require registration for detailed submission guidelines and documentation.

Ministry of Water Environment and Climate Change

POSTED

about 23 hours ago

DEADLINE

Chain-Link Fence Preservation/RemovalThe contract involves the careful removal or preservation of existing chain-link fences located near areas designated for demolition, requiring precise work to avoid damage to surrounding infrastructure or property. All activities must be conducted with strict adherence to safety protocols, and any fences that are removed must be handled in a manner that ensures safe transport and disposal or storage. Comprehensive documentation is required for every step of the process, including pre-removal conditions, methods used, and final disposition of materials, ensuring full accountability and compliance with project specifications. This subcontract, classified under NAICS code 238310 for site preparation and related services, is issued by the City of Beaumont in Texas and is open for response until August 14, 2026. The scope emphasizes precision and care, making it suitable for contractors with experience in sensitive site work near demolition zones. The contract does not specify a set-aside status or point of contact, and performance is expected to occur within the City of Beaumont without further geographic detail provided. Interested parties must review the full solicitation through the provided online portal to understand all requirements, expectations, and submission procedures.

City Of Beaumont

POSTED

DEADLINE

Radiation Shielding & Structural ModificationsThe contract entails the installation of comprehensive radiation shielding systems to support the safe operation of LINAC equipment, involving the use of lead-lined walls, barium plaster, and reinforced concrete barriers to ensure compliance with radiation safety standards. Structural modifications are required to provide adequate load-bearing capacity and stability for the heavy medical equipment, including reinforcement of floors and load-bearing walls to accommodate the weight and operational demands of the LINAC setup. The work must be executed in accordance with industry best practices for radiation containment and building integrity, with all materials and methods meeting applicable safety and regulatory requirements. The subcontract is issued by Harris County in Texas under NAICS code 238310 for specialized construction services. The opportunity was posted on July 24, 2026, with a response deadline of August 31, 2026, at 7:00 PM. Performance location details are not specified but are expected to occur within Harris County. No set-aside classification or point of contact information is provided. Contractors must be prepared to deliver high-precision shielding and structural integration work with full attention to safety, technical accuracy, and adherence to project specifications.

POSTED

DEADLINE

in about 1 month

STC-50 Sound-Rated Wall ConstructionThe contract involves the construction of new STC-50 sound-rated partitions within designated office areas, encompassing framing, insulation, drywall installation, and finishing to meet strict acoustic performance standards. Work is limited to specific locations within Washington, DC, with a ZIP code of 20001, and must be completed in accordance with technical specifications for sound transmission class rating. The effort is being conducted under a subcontract with a Service-Disabled Veteran-Owned Small Business Set Aside designation, meaning only qualified small businesses owned and controlled by service-disabled veterans are eligible to compete. The North American Industry Classification System code is 238310, identifying the scope as drywall and acoustic insulation work. The opportunity was posted on July 24, 2026, and responses are due by August 13, 2026, by 5:00 PM. The contracting activity falls under the Treasury Operations within the Department of the Interior, though specific office or point of contact details are not provided. All work must be performed on-site at the Washington, DC location to ensure compliance with the STC-50 requirement, which demands precise material selection and construction techniques to limit sound transfer between adjacent spaces. The subcontract structure indicates this work is likely part of a broader federal modernization or renovation initiative within a government facility. Interested parties must submit proposals prior to the deadline, as the set-aside restrictions limit competition to entities that meet the SDVOSBC certification criteria with verified ownership and control by service-disabled veterans.

Treasury Operations

POSTED

DEADLINE

Drywall, Framing, and Interior Partition InstallationThe contract pertains to the installation of metal and wood studs, drywall, taping, mudding, and finishing for reconfigured office spaces within Building 5000 at Scott Air Force Base, with a NAICS code of 238310 for interior construction work. This is a subcontract issued under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is managed by the Department of Defense through the W7M6 Uspfo Activity Ilang 126. The opportunity was posted on July 24, 2026, with a firm response deadline of August 14, 2026, at 6:00 p.m. All work must be performed at the specified location in Scott Air Force Base, zip code 62225, and the project involves interior partitioning and finishing to meet new office layout requirements, requiring skilled labor in framing and drywall systems.

W7M6 Uspfo Activity Ilang 126

POSTED

DEADLINE

Interior Demolition and ReconstructionThe contract involves the full demolition and reconstruction of existing shower and restroom finishes, with the space being converted into a dedicated lactation room designed to meet modern functional and safety standards. The scope includes installing moisture-resistant drywall and framing to ensure durability in high-humidity environments, addressing both structural integrity and long-term maintenance needs. All work must comply with applicable building codes and health requirements to support a clean, private, and accessible facility for users. The solicitation is classified as a subcontract under NAICS code 238310, indicating it falls within the specialty trade contractor category for plumbing, heating, and air-conditioning work. It was posted on July 24, 2026, with a response deadline of August 18, 2026, at 5:30 p.m. The place of performance is designated as Other, Kentucky, though no specific city or address is provided. The contracting agency is listed as Kentucky with no further organizational or point of contact details disclosed, and the full details can be accessed via the provided online link.

POSTED

DEADLINE

Interior Renovation and Architectural FinishesThe contract titled Interior Renovation and Architectural Finishes entails the complete demolition of existing interior structures, followed by extensive reconfiguration of interior spaces to meet modern functional and accessibility requirements. Work includes the installation of wall systems, ceiling grids, doors, hardware, and backlit signage, all of which must comply with ADA guidelines and local municipal building codes. The scope demands precision in material selection and craftsmanship to ensure seamless integration with existing architectural elements while maintaining regulatory compliance. All work must be executed to support usability, safety, and aesthetic standards expected in publicly accessible environments. This is a subcontract opportunity posted by the state of Utah with a response deadline of August 5, 2026, at 4:00 PM. The North American Industry Classification System code 238310 indicates the nature of the work falls under building finishing contractors, targeting skilled firms experienced in interior finish trades. The opportunity is accessible through the Utah BonfireHub platform, and while no specific location, point of contact, or set-aside designation is provided, bidders are expected to demonstrate capacity to fulfill the full scope under state and federal accessibility mandates. Participation requires submission before the deadline to be considered for award.

POSTED

DEADLINE

PULLEY, GROOVEThe contract is for the procurement of three groove pulleys identified by NSN 3020-20-013-5998 and part number 9885-1 1/4 from 3M Canada Company, under solicitation SPE7L5-26-T-4602. Delivery is required within 168 days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination facility in Barstow, California, and all items must be packaged in compliance with DLA’s packaging requirements, including MIL-STD-129 labeling and ASTM D3951 for non-hazardous materials, unless otherwise superseded by DLA’s Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. The unit of issue is each, with a total contract value of $9.00. All packaging and palletization must follow RP001 guidelines, and hazardous material handling must comply with TQ requirement IP025 if applicable. The required delivery date was originally November 1, 2026, with a needed ship date of January 19, 2027, and the contract remains active under the Department of Defense’s Land Supplier Operations Engines.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Drywall, Painting, and Interior FinishesThe contract involves the installation and finishing of drywall along with all associated interior finishes, including taping, mudding, texturing, painting, trim, and baseboards for renovated rooms. The work is part of a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the FAR 19.5 regulations, with the NAICS code 238310 classifying the scope as interior finish contracting. Performance of the work is required at a location in Columbus, Mississippi, with a zip code of 39710. The solicitation was posted on July 23, 2026, and all proposals must be submitted by August 24, 2026, at 7:00 PM Eastern Time. This is structured as a subcontract under the Department of Defense, specifically managed by the FA3022 14 Cons Lgca office, and it seeks qualified small business contractors to deliver comprehensive interior finish services across designated renovated areas. There is no specified point of contact listed publicly, and further details should be accessed through the official SAM.gov portal link provided for this opportunity.

FA3022 14 Cons Lgca

POSTED

DEADLINE

Spray Foam Insulation The contractor is required to furnish all supervision, labor, materials, and equipment necessary to perform surface preparation and apply spray foam insulation to the interior metal walls and ceiling of the Bldg. 9 Mezzanine. This work falls under NAICS code 238310 and is being procured as a total small business set-aside, meaning only small businesses are eligible to compete. The solicitation is issued under number N0016726Q1133 by the Naval Surface Warfare Center Carderock, part of the Department of Defense, with the office located in Bethesda, Maryland. Proposals must be submitted by August 6, 2026, at 5:00 p.m. EST, and the contract will be performed at the same location. Point of contact for questions and submissions is Michael Rossik, with Tanika Banks as the secondary contact, both reachable through their official Navy email addresses and phone number provided. The opportunity is listed on SAM.gov and must be accessed through the provided UI link for full solicitation details.

POSTED

DEADLINE

Interior Finishes – Drop Ceilings and PaintingThe contract encompasses the installation of drop ceilings with integrated insulation, along with interior and exterior painting services, all designed to harmonize with the existing architectural character of campus buildings. Work must comply with aesthetic and functional standards that align with the current building finishes, ensuring a cohesive visual and environmental experience across the facility. The project falls under NAICS code 238310 for specialized trade contractors and is classified as a subcontract, indicating it is part of a larger construction or renovation initiative managed by the Mississippi Department of Military. Bids are due by August 27, 2026, with the solicitation posted on July 22, 2026, allowing potential contractors approximately five weeks to prepare and submit proposals. The place of performance and contact details are not specified, but the work is tied to state-owned campus facilities under the Mississippi Department of Military’s jurisdiction. All painting and ceiling installations must meet quality specifications consistent with existing structures, and any materials or methods used must be approved to ensure uniformity with the campus’s established design language.

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

Wall Surface RefinishingThe contract titled Wall Surface Refinishing involves the repair, installation, and finishing of interior wall surfaces to restore both structural integrity and aesthetic appearance, with inclusion of mold remediation should it be identified during the work. Scope of work encompasses drywall installation, surface preparation, painting, and all associated finishing tasks necessary to bring interior walls to specified standards. The work is classified under NAICS code 238310 for drywall and insulation contractors and is issued as a subcontract by the Mississippi Department of Military. Bidding is open to qualified respondents with a deadline for submission set for August 27, 2026, and the opportunity was published on July 22, 2026. The place of performance and exact location details are not specified in the provided data, but the contracting authority is the Mississippi state agency, indicating the work is likely to be performed on state-funded military or government facilities within Mississippi. All technical and compliance requirements must be met without explicit set-aside provisions indicated.

MS DEPT of MILITARY

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Agriculture → Dixie National Forest

Same awarding agency

General Construction Management and Site SupervisionThe contract encompasses comprehensive oversight of all repair activities, including scheduling, quality control, and strict adherence to contract requirements for the General Construction Management and Site Supervision project. Work is focused on the Escalante area with a ZIP code of 84726, under the jurisdiction of the Dixie National Forest within the Department of Agriculture. This is a subcontract classified as a Total Small Business Set-Aside, meaning only eligible small businesses can compete, with the NAICS code 236220 indicating it pertains to commercial and institutional building construction. The solicitation was posted on July 23, 2026, with a firm response deadline of August 14, 2026, at 11:00 PM. All activities must align with federal compliance standards and ensure efficient, high-quality execution of construction-related repairs and supervision tasks at the designated location.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Flooring Repair or ReplacementThe contract calls for the assessment and repair or replacement of damaged flooring materials in the basement, specifically addressing vinyl, tile, and subfloor components. Work is to be performed at the Escalante location with a ZIP code of 84726, under the authority of the Dixie National Forest, which operates under the Department of Agriculture. The procurement is classified as a subcontract with a Total Small Business Set-Aside designation, meaning only small businesses certified under the SBA program are eligible to bid, as defined by FAR 19.5. The North American Industry Classification System code for this work is 238350, which corresponds to flooring contractors. Bidders must submit responses by the deadline of August 14, 2026, at 11:00 PM Eastern Time, following the posting date of July 23, 2026. All work is expected to meet quality standards for residential and facility flooring repair, with performance confined to the specified site in Escalante.

Finish Carpentry Contractors

POSTED

DEADLINE

Electrical System Inspection and RepairThe contract pertains to the assessment and repair of electrical systems compromised by floodwater, specifically targeting outlets, wiring, and panels within the Escalante area, Utah, under the NAICS code 238210 for electrical contractors. It is designated as a total small business set-aside under SBA guidelines, ensuring eligibility and exclusivity for small business concerns as defined by the SBA. The work is required to be performed in response to flood damage, necessitating thorough inspection and restoration of all affected electrical infrastructure to meet safety and functionality standards. Performance is mandated at the specified location, and all bidders must comply with the response deadline of August 14, 2026, after which proposals will no longer be accepted. This subcontract opportunity is managed under the auspices of the Dixie National Forest, part of the U.S. Department of Agriculture, and is linked to a federal procurement portal for submission and tracking.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Carpentry and Wood FramingThe contract involves carpentry and wood framing services focused on repairing or replacing damaged wall studs and framing located behind paneling, with potential additional work including door and trim adjustments as needed. It is a subcontract under a Total Small Business Set-aside, designated for small businesses as defined by the SBA, and falls under NAICS code 238130 for framing contractors. The opportunity was posted on July 23, 2026, with a response deadline of August 14, 2026, at 11:00 PM. Work must be performed at Escalante, Utah, with a zip code of 84726, under the oversight of the Dixie National Forest, a unit of the U.S. Department of Agriculture. All bids must come from qualified small business entities eligible under the set-aside requirements, and no specific point of contact is listed for inquiries.

Framing Contractors

POSTED

DEADLINE

Painting and Wall Coating ServicesThe contract solicits painting and wall coating services for newly installed drywall to fully match existing surface conditions, ensuring seamless visual and textural integration within the facility. Work is limited to priming and painting activities, with strict adherence to color, sheen, and finish requirements of the surrounding walls. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. The NAICS code 238320 classifies this as a specialty trade contractor work for interior wall coating, placing it under the administrative oversight of the Dixie National Forest, a division of the Department of Agriculture. Performance is required at Escalante, Utah, with a zip code of 84726, and responses must be submitted by August 14, 2026, at 11:00 PM EST, following the public posting on July 23, 2026.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Demolition of Damaged Interior FinishesThe contract mandates the complete removal of interior finishes compromised by floodwater, including wood paneling, drywall, and insulation, within the Escalante area under the jurisdiction of the Dixie National Forest. All work must be performed in accordance with applicable safety and environmental standards to ensure proper disposal and mitigation of water-damaged materials. The project is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small businesses as defined by the North American Industry Classification System code 238990, which covers other specialty trade contractors. Submissions must be received by August 14, 2026, at 11:00 PM, with the opportunity announced on July 23, 2026. Performance is required at the specified zip code 84726, and no further details on point of contact or specific agency offices are provided.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Water Damage Remediation and Mold AbatementThe contract titled Water Damage Remediation and Mold Abatement concerns the extraction of water-damaged materials, thorough drying, and remediation of mold or moisture-affected areas within a basement location in Escalante, Utah, with a ZIP code of 84726. The work is required to address environmental hazards resulting from water intrusion, ensuring the affected space is safely restored to a habitable and healthy condition. The project is classified as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses certified by the Small Business Administration are eligible to bid, with the NAICS code 561740 specifically designating environmental remediation services. The solicitation was posted on July 23, 2026, with a response deadline of August 14, 2026, at 11:00 PM Eastern Time. The contracting entity is the Dixie National Forest under the U.S. Department of Agriculture, and while no specific point of contact is provided, the place of performance is clearly identified in Escalante. The work must comply with industry standards for mold abatement and water damage restoration, involving careful removal, drying protocols, and sanitation procedures to prevent recurrence or spread of contaminants. Contractors must be prepared to work in a potentially hazardous environment while adhering to federal and local environmental safety regulations.

Carpet and Upholstery Cleaning Services

POSTED

DEADLINE

Escalante Basement Flood Repairs - Dixie National ForestsThis contract covers the repair and remodeling of a basement in an existing building located at 87 E 200 N, Escalante, Utah, within the Escalante Ranger District of the Dixie National Forest. The scope of work includes removing existing wood paneling in the bedroom and replacing it with gypsum board, installing carpet, and applying all necessary finishes. Additional tasks involve repairing damaged or missing sections of wood paneling in the living and laundry rooms to ensure consistency with the existing conditions. All labor, materials, and finishing work required to complete these renovations are included in the contract. The project is identified as Escalante Basement Flood Repairs under solicitation number 1240LT26Q0124 and is classified as a Total Small Business Set-Aside for SBA-qualified entities. The North American Industry Classification System code is 236220, indicating construction of commercial and institutional buildings. The opportunity was posted on July 23, 2026, with responses due by August 14, 2026. The contracting office is part of the U.S. Department of Agriculture’s Dixie National Forest, based in Cedar City, Utah. Primary point of contact for questions is Terri Tucker, reachable via email at terri.tucker@usda.gov. Work must be performed at the specified location in Escalante, Utah.

Commercial and Institutional Building Construction

POSTED

DEADLINE