This Pre-Solicitation opportunity from General Services Administration was posted on February 26, 2002. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

H -- Inspection and Monitoring of Elevators

Closed

GS-02P-01-PVD-0040Federal

Submission Closed04/09/2002, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Kubota Attachment Installation and Calibration

Department of Blind and Vision Impaired

POSTED

DEADLINE

Well Pumping Assembly Inspection and Shop Repair

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.

LE - Production - MPP

POSTED

DEADLINE

Marine Mechanical Systems Repair

POSTED

DEADLINE

On-Call Ad-Hoc Elevator Inspections

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Specialized Five-Year Elevator Full-Load Testing

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Semi-Annual and Annual Elevator Inspection Services

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Fuel Dispenser Technical Installation & RepairThis subcontract for Fuel Dispenser Technical Installation and Repair involves the physical replacement and calibration of damaged parts within Tatsuno dispensing units for prime contractors working on Pakistan State Oil Company Ltd projects in Pakistan. The scope of work includes removing damaged components, installing new parts, testing for leaks, and utilizing specialized calibration equipment and fuel-safe tools to ensure accurate fuel measurement and fully operational units. To qualify for this engagement, providers must hold technical certification for Tatsuno equipment and adhere to ATEX/IECEx hazardous area safety standards. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026, falling under NAICS code 811310.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)

Solicitation # RF-32079-AS

Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.

Pakistan State Oil Company Ltd

POSTED

DEADLINE

Fisher Recirculation Valve and Actuator DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two Fisher recirculation valves and actuators supporting prime contractors on City of Redding projects. The scope of work includes the disassembly of valve bodies, cleaning and inspection of diaphragms, seats, and seals, as well as the machining and lapping of valve seats. Additionally, the contractor is responsible for calibrating and testing actuators using Fisher OEM seal kits and specialized valve testing benches to ensure fully overhauled and calibrated equipment is delivered. The project is located in Redding, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of December 4, 2026.

City of Redding

POSTED

about 10 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This contract, solicitation number GS-02P-01-PVD-0040, is issued by the General Services Administration's Pbs R2 Repair and Alterations Branch for the inspection and monitoring of elevators and escalators. The scope of work includes annual and semi-annual inspections, five-year safety drop tests, and emergency power testing across multiple New York locations, including 201 Varick Street, the US Mission to the UN, the Alexander Hamilton US Customs House, and the US Courthouse in White Plains. All services must comply with ANSI/ASME Safety Code Requirements and include all necessary labor, parts, and materials. The opportunity is designated as a Total Small Business Set-Aside. Following a schedule adjustment, the bid issuance date was moved to March 7, 2002, with a final response deadline of April 9, 2002. Shari J. Gouveia serves as the Contract Specialist for this procurement.

General Info

GSA small business contract for elevator and escalator inspections at multiple New York locations.

Agency

General Services Administration → Pbs R2 Repair And Alterations Branch

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

FOB 201 Varick Street, New York, NYUS Mission to the United Nations, 799 UN Plaza, NY NY Alexander Hamilton US Customs House, 1, NY

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

3 updates

PhaseClosed

PostedJan 3

Presolicitation

Notice updatedJan 14

Set-aside added: Total Small Business Set-Aside (FAR 19.5). The notice description changed. The point of contact changed.

Notice updatedFeb 11

The notice description changed. The point of contact changed.

Notice updatedFeb 26

Response deadline changed from Feb 20, 2002 to Apr 9, 2002. The notice description changed. The point of contact changed.

Response DeadlineApr 9

Deadline has passed

Submission Closed

04/09/2002, 05:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeneral Services Administration → Pbs R2 Repair And Alterations Branch

Contacts1 person available

OfficeNEW YORK, NY, 10007, USA

Organization / AgencyGeneral Services Administration → Pbs R2 Repair And Alterations Branch

Office AddressNEW YORK, NY, 10007, USA

Contacts

Shari J. GouveiaContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Inspection and Monitoring of Elevators Annual and semi-annual, five year elevator safety drop test, escalators, and elevators under emergency power test and inspections at FOB 201 Varick Street, New York, NY, US Mission to the UN, 799 UN Plaza, New York, NY, Alexander Hamilton US Customs House, One Bowling Green, New York, NY, and US Courthouse, 300 Quarropas Street, White Plains, NY in compliance with ANSI/ASME Safety Code Requirements, including all labor, parts, and materials. Anticipated bid issuance date is changed from 02/26/2002 to 03/07/2002 and bid opening date is changed from 03/28/2002 to 04/09/2002.