Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

H-Type Connectors

Active

Z4929State & Local

Response Deadline08/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

H-Type connectors designed for aluminum or copper conductors are required for installation using the Kearney 0-52 mechanical tool with "O" or "D" wire diameter specifications. The connectors must accommodate groove dimensions for both "A" and "B" grooves ranging from .292 to .162 inches. Each box of connectors must be clearly marked with a 1 1/2 inch high numeral #1 for proper identification. Only approved manufacturers and part numbers are acceptable, including KEARNE506-82, BLACKBRNWR-159, BURNDYYHO-100, and ANDERSONAC-506-82. This solicitation, numbered Z4929, is issued by Nashville Electric Service in Tennessee and is open for response until August 10, 2026, at 7:00 PM. The procurement is targeted at state and local government entities and all bids must be submitted through the vendor portal linked in the solicitation. Primary contact for inquiries is Bailey Allen, reachable via phone or email provided.

General Info

H-type connectors for aluminum/copper, Kearney 0-52 tool, approved part numbers, bid due August 10, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

423610 - Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant WholesalersView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(1)

RFB Z4929 Electric Power Board Connectors

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedAug 4

Solicitation

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, US

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, US

Contacts

Bailey AllenProcurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

H-TYPE CONNECTORS FOR ALUMINUM OR COPPER CONDUCTORS TO BE INSTALLED WITH KEARNEY 0-52 MECHANICAL TOOL USING "O" OR "D" WIRE DIAMETER. RANGE FOR "A" GROOVE, .292 TO .162; "B" GROOVE .292 TO .162. EACH BOX MUST BE MARKED TO SHOW 1 1/2" HIGH NUMERAL #1. Approved Manufacturers and/or Part Numbers: KEARNE506-82 BLACKBRNWR-159 BURNDYYHO-100 ANDERSONAC-506-82

Similar Contracts

Same NAICS industry code

Supply of New HVAC Equipment (Packaged Units & Condensers)Adams & Associates, Inc. is seeking qualified small businesses to supply 18 new gas-fired packaged HVAC units with a 12.5 SEER rating and 2 condensing units using non-R22 refrigerants, ensuring compliance with current environmental standards. The contract requires full technical documentation, including manufacturer specifications, material safety data sheets, and proof of on-time delivery to meet project timelines. The solicitation is designated as a subcontract under SBA small business set-aside programs, open exclusively to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The NAICS code 423610 applies to wholesale trade of HVAC equipment, and all bids must be submitted by the deadline of August 7, 2026. The equipment is intended for replacement use in three dormitory facilities, though specific delivery locations are not detailed in the posting.

Adams & Associates, Inc.

POSTED

about 23 hours ago

DEADLINE

FIRE ALARM REPAIR PARTS

Solicitation # RFQ #10351- (26-27)

Berkeley County School District is seeking a qualified supplier through RFQ #10351- (26-27) to provide a one-time supply and delivery of fire alarm repair parts compatible with EST3 Fire Alarm systems across all district facilities. The total contract value is capped at $100,000.00, and the procurement is intended to establish a reliable source for critical maintenance components to ensure the continued functionality and safety of the district’s fire alarm infrastructure. The solicitation is open to all eligible vendors with no set-aside requirements, and responses must be submitted by the deadline of August 21, 2026, at 6:00 PM. The place of performance is within South Carolina, and the primary point of contact for inquiries is Christy Davis, CPPB, who can be reached via email at daviscatherine@bcsdschools.net or by phone at 843-899-8304. This procurement falls under the SLED category, reflecting its public education sector origin, and is being managed through the South Carolina State Board of Procurement portal.

Berkeley County School District

POSTED

about 23 hours ago

DEADLINE

REBID 80kW Standby Generator - Stoney Mountain Lift Station

Solicitation # RFP-HH-3964

Eastern Municipal Water District is seeking proposals for the supply and delivery of a single 80 kW standby generator equipped with a generator-mounted load bank, fully compliant with the technical specifications detailed in the Standard Detail Provisions and this requests for proposal. The selected vendor must also provide comprehensive start-up and commissioning services to ensure proper operational functionality. This solicitation, identified as RFP-HH-3964 and titled REBID 80kW Standby Generator - Stoney Mountain Lift Station, was posted on August 3, 2026, with responses due by August 24, 2026. The contract is managed by the Eastern Municipal Water District in California, with performance expected at the Stoney Mountain Lift Station. All inquiries should be directed to Haely Hernandez at hernanha@emwd.org, and further details are accessible through the provided online portal.

Eastern Municipal Water District

POSTED

DEADLINE

Lighting and Electrical Equipment SupplyThe contract entails the supply of military-grade lighting fixtures, emergency lights, LED panels, and associated electrical components intended for use across military installations to support infrastructure and facility operations. These equipment items are specifically designed to meet stringent defense standards for durability, reliability, and performance under demanding operational conditions. The subcontract is issued under the Defense Logistics Agency, a division of the Department of Defense, and is classified under NAICS code 423610, which covers wholesale trade of electrical equipment and supplies. The contract was posted on August 3, 2026, and while specific delivery locations are not detailed, performance is expected to occur at various military sites nationwide. The award reference indicates an active solicitation with a specific contract number and delivery identifier, confirming its ongoing and active status within the defense procurement pipeline.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Traffic Signal Equipment and Components

0H100 - HIGHWAY

POSTED

DEADLINE

in about 1 month

115 kV Disconnect Switches (15)

Solicitation # 26-323

Pend Oreille County PUD No. 1 is soliciting bids for fifteen 115 kV disconnect switches under solicitation number 26-323, with the bid opening conducted through a one-step unsealing process. The bid documents are available starting August 3, 2026, and all questions must be submitted via the Clarifications tab on the ProcureWare portal by the deadline of August 17, 2026, at 2:00 PM. Proposals are due by August 19, 2026, at 2:00 PM, with bids submitted in USD and no pre-bid meeting scheduled. The contract falls under NAICS code 423610 and is categorized as a solicitation for a state, local, or educational government entity. The bill-to address is PO Box 190 in Newport, WA, while the ship-to location is the Diamond Lk Substation Storage at 9316 Coyote Trail, Newport, WA. All relevant documentation must be accessed through the Documents tab on the portal, and inquiries about the procurement system should be directed to contracts@popud.org. Bidders must register and log in to view additional details and submit responses.

Pend Oreille County PUD No. 1

POSTED

DEADLINE

Traffic Signal And Roadway Lighting Hardware, Equipment, Supplies, And Replacement Parts

Solicitation # 20260731025

The City of Tracy is seeking competitive pricing proposals to establish a General Services Agreement for the supply of traffic signal and roadway lighting hardware, equipment, supplies, replacement parts, and accessories. The contract will be awarded on an as-needed basis over multiple fiscal years, with an initial term of two years and an option to extend for up to three additional years, providing long-term flexibility for ongoing infrastructure maintenance and upgrades. This procurement is open to qualified vendors who can reliably deliver essential components required to support the city’s public safety and transportation systems. The solicitation, numbered 20260731025, was posted on August 3, 2026, with responses due by August 13, 2026, and falls under NAICS code 423610 for Electrical and Wiring Equipment and Supplies Merchant Wholesalers. The contract is being managed by the City of Tracy in California, with all performance obligations centered in Tracy, zip code 95376. While no set-aside provisions are indicated, interested suppliers must respond through the designated online portal to ensure compliance with submission requirements and timelines.

POSTED

DEADLINE

APC and zLock Products

Solicitation # 27533

The Chickasaw Nation is soliciting bids for specific APC and zLock Power Distribution products, including two APC Smart-UPS Ultra Li-ion 5KVA 208V RM UPS units and four APC NetShelter Metered Rack PDUs rated for 5.0kW at 200V and 208V with 36 C13 and 6 C19 outlets, designed for high-demand data center environments. Additionally, the solicitation requests fifteen each of red and black Locking C14 to C15 power cables, each one meter in length and made with 14AWG wiring, to ensure secure and stable power connections. All items are critical infrastructure components aimed at maintaining uninterrupted power and controlled energy distribution within the Nation’s facilities. The solicitation, identified by number 27533, was posted on August 3, 2026, with a response deadline of August 5, 2026, leaving a narrow two-day window for submissions. The opportunity is open to qualified vendors with no set-aside restrictions indicated, and all responses must be submitted through the Chickasaw Nation’s business network portal. Point of contact for inquiries is Chloe Miller, reachable via email at chloe.miller3@chickasaw.net. Deliverables must be capable of supporting 208V environments and meet the specified technical requirements for outlet configuration, current rating, and physical design to ensure compatibility with existing systems.

Chickasaw Nation

POSTED

DEADLINE

in about 10 hours

Warehouse and Maintenance Consumables SupplyThe contract titled Warehouse and Maintenance Consumables Supply is a subcontract set aside exclusively for small businesses under the SBA program, aiming to provide essential maintenance consumables such as lubricants, sealants, Teflon tape, O-rings, and gaskets to support ongoing equipment upkeep. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, at 9:00 PM, and the North American Industry Classification System code 423610 indicates classification under Wholesale Trade of Hardware, Plumbers, and Heating Equipment and Supplies. The agency responsible is the Upper Colorado Regional Office under the Department of the Interior, with performance location and specific delivery details not specified in the provided data. All bids must come from qualified small businesses, as this is a total small business set aside, ensuring preferential consideration for eligible small business concerns. Interested parties can access additional information through the official SAM.gov link provided for the opportunity.

Upper Colorado Regional Office

POSTED

DEADLINE

Conduit and Innerduct SupplyThe contract involves the supply of high-density polyethylene HDPE conduit and innerduct for the protection of fiber optic cables, with specified sizes including 1.25 inch and 2 inch diameters. This subcontract is linked to Caltrans District 6 in Fresno and Bakersfield, California, and falls under NAICS code 423610 which pertains to construction material merchant wholesalers. The solicitation was posted on August 3, 2026, and the place of performance is within the jurisdiction of Caltrans District 6, although specific city or zip details are not provided. The contract is intended to support infrastructure projects requiring durable, corrosion-resistant conduit systems to safeguard telecommunications cabling. No set-aside provisions or point of contact information are specified, and the details are accessible via the provided Caltrans project link.

Caltrans, District 6 - Fresno/Bakersfield

POSTED

DEADLINE

Siemens 25kA circuit breakers style plug-in units rated at 480/277V with connector and cord

Solicitation # W8474-278700

The Department of National Defence is seeking to procure seventy Siemens 25kA circuit breaker plug-in units rated at 480/277V, each including integrated connectors and cords, along with seventy corresponding Siemens connectors, to upgrade its existing XJ-L busway system from thirty-amp to sixty-amp circuit capacity. These components are specifically designed for compatibility with the Siemens XJ-L series and must be delivered to Ottawa, Ontario, no later than 30 November 2026. The requirement stems from the need to enhance power distribution capacity within current infrastructure without replacing the entire busway system, ensuring seamless integration with existing equipment. All suppliers may submit offers in response to this solicitation, which follows a competitive procurement process where the lowest evaluated compliant bid will be selected for award. The procurement is not subject to any Comprehensive Land Claims Agreement and carries no security requirements. Bids must comply fully with the specifications outlined in the Statement of Requirement and be submitted by 14:00 Eastern Time on 4 August 2026. Documents may be submitted in either English or French, and the Crown reserves the right to engage in negotiations with suppliers. The solicitation number is W8474-278700, and inquiries may be directed to Brooke Monette at the Department of National Defence.

Department of National Defence

POSTED

DEADLINE

Ground Wire Moulding

Solicitation # Z4922

The contract is for Ground Wire Moulding, specifically molded plastic black 1/2 inch ground wire moulding in eight foot lengths, with approved manufacturers and part numbers including ELECMATPEGM1/2B, CSTMPLACPI0.5GWM8BL, and PREFORMEGWM7200. The solicitation number is Z4922, issued by Nashville Electric Service under the Tennessee state agency, with a posted date of August 3, 2026, and a response deadline of August 7, 2026 at 7:00 PM. The procurement is categorized under SLED and the place of performance is Nashville, Tennessee. All deliveries and specifications must meet the listed product requirements, and inquiries should be directed to Bailey Allen, the primary procurement contact, via email at ballen1@nespower.com or phone at 615-747-3724. Bidders must submit responses through the vendor portal at the provided uiLink before the deadline to be considered for award.

Nashville Electric Service

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of 3/8" Drive Penta SocketsThe contract calls for the supply of 30 units of 3/8 inch square drive penta sockets, regular length, with specifications requiring them to be equivalent to either the SNAP ON B2190 or WILLIAMS BB-526 models. The solicitation is structured as a subcontract under NAICS code 332211, indicating it falls within the tool and die manufacturing sector. The posting date is listed as August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The place of performance is clearly identified as Nashville, though the state and zip code are not specified. The contracting organization is Nashville Electric Service, operating under the Tennessee entity. There is no designated set-aside type, and no point of contact information is provided within the data. Interested parties must submit responses via the vendor portal at the provided web link.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of 1/2" Drive Penta SocketsThe contract requires the supply of 30 units of 1/2-inch square drive penta sockets with regular length, all of which must comply with SNAP ON B2191 specifications. This is a subcontract opportunity issued by Nashville Electric Service under the NAICS code 332211, which corresponds to die, die stamping, and metal stamping manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. Performance of the contract is expected to take place in Nashville, with no specific state or zip code provided. The offering is accessible via a vendor portal at the provided URL, and while the type of set-aside is not specified, the contracting entity is a public utility organization based in Tennessee. No point of contact is listed within the provided data.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Specialized Packaging and Marking ServicesNashville Electric Service is seeking specialized packaging and labeling services for high-value electrical connectors used in utility infrastructure, with requirements focused on secure transport and full logistics traceability. The contract encompasses custom kitting, protective packaging, and precise marking to ensure component integrity and compliance with operational standards throughout the supply chain. Bidders must demonstrate capability to handle sensitive electrical components with strict quality controls and end-to-end visibility protocols. The solicitation is classified as a subcontract under NAICS code 561910 for other support services and is open for responses until August 7, 2026, at 7:00 PM Eastern Time, with the opportunity posted on August 4, 2026. Performance is expected to be carried out in Nashville, Tennessee, and interested parties must submit proposals through the vendor portal at the provided URL. There is no set-aside type indicated, and all qualified subcontractors are eligible to respond.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Technical Equivalency Testing and Certification SupportNashville Electric Service is seeking third-party support to conduct technical testing, validation, and documentation for non-listed high-temperature connector products to establish equivalency claims against recognized standards. The scope includes comprehensive thermal and mechanical performance evaluations to demonstrate that these connectors meet or exceed the required safety and operational benchmarks under extreme conditions. The work must result in detailed, defensible documentation suitable for certification or regulatory review, ensuring the products can be deemed functionally equivalent to listed alternatives without compromising reliability or compliance. This subcontract opportunity requires submission of technical proposals by the deadline, with the performance location tied to Nashville, Tennessee, and the work governed under the NAICS code for professional, scientific, and technical services.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Supply of High-Temperature Compression Deadend ConnectorsNashville Electric Service is seeking qualified suppliers to manufacture and deliver 24 high-temperature compression deadend connectors specifically designed for use with ACSS conductors in NERC-regulated transmission systems. These connectors must be rated for continuous operation at 250°C to ensure reliable performance under demanding thermal conditions inherent in modern high-capacity power transmission networks. The contract is issued as a subcontract under NAICS code 335931, indicating a focus on electrical equipment manufacturing, and all work is expected to be performed with Nashville, Tennessee as the designated place of performance. Interested vendors must submit responses by the deadline of August 7, 2026, at 7:00 PM Eastern Time, following the procurement process outlined through the official vendor portal at the provided URL. While the solicitation number is not specified, the procurement is structured to meet strict technical and operational standards required for critical infrastructure applications.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of Weather-Resistant Nylon Cable Ties

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of H-Type Electrical Connectors for Aluminum/Copper ConductorsNashville Electric Service is seeking to procure 3,650 units of H-Type mechanical connectors designed for use with aluminum or copper conductors, along with the KEARNEY 0-52 mechanical tool required for proper installation. The connectors must adhere to precise groove dimensions and labeling specifications to ensure compatibility and safety across electrical installations. The contract is classified as a subcontract and is posted under NAICS code 335931, which pertains to other electrical equipment and component manufacturing. Responses are due by August 10, 2026, at 7:00 PM, with the solicitation posted on August 4, 2026. Performance of the contract is expected to take place in Nashville, Tennessee. Interested parties must submit their proposals through the official vendor portal accessible via the provided URL.

Current-Carrying Wiring Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of RIDGID 31020 Straight Pipe Wrench (2" Capacity, 14" Length)The contract is for the supply of a specific off-the-shelf RIDGID model 31020 straight pipe wrench with a two-inch capacity and fourteen-inch length, requiring no installation, assembly, or additional services. The item is classified under NAICS code 332211 and is being procured as a subcontract by Nashville Electric Service, an organization based in Tennessee. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The place of performance is specified as Nashville, though no further address details are provided. All inquiries and submissions must be made through the vendor portal linked at vendor.nespower.com under bid Z4926, and no set-aside status or organizational type details are indicated.

Cutlery and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Precision Hand Tap Supply – 1/2" UNC Thread, Type 1001Nashville Electric Service is procuring a commercial off-the-shelf 1/2-inch-13 UNC hand tap with a four-flute design and Type 1001 specification for use in industrial threading operations. This procurement is strictly brand-specific, with no substitutions permitted, ensuring exact compliance with the required tooling standards. The solicitation, posted on August 4, 2026, has a response deadline of August 11, 2026, at 7:00 PM, and is categorized as a subcontract under NAICS code 332215. Performance of the contract will take place in Nashville, Tennessee, and interested vendors must submit responses through the official vendor portal at the provided link.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z4926

Nashville Electric Service is soliciting a 14-inch straight pipe wrench with a 2-inch pipe capacity, featuring replaceable jaws and an I-beam handle, specifically identified by the approved part number RIDGID31020. The solicitation, numbered Z4926, was posted on August 4, 2026, and responses are due by August 11, 2026, at 7:00 PM Eastern Time. This procurement is categorized under a state, local, or educational agency type and is intended for use within the agency’s operations in Nashville, Tennessee. All deliveries and performance must occur in Nashville, TN. Shanna Faulk serves as the primary point of contact for procurement inquiries and can be reached via email at sfaulk@nespower.com or by phone at 615-747-3578. Interested vendors must submit their proposals through the official vendor portal linked in the solicitation details.

Hardware Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z4928

The contract involves the procurement of hand taps specified as TAPER HAND TAP 1/2"-13 TAPER, UNC THREAD FORM, FOUR FLUTE, TYPE 1001, LIMIT H3, with approved manufacturers and part numbers listed as UNIVERS3100-1/2-13-T and CLEVTWISC54726. These tools are intended for use in threading applications requiring precise taper threads and are designated for a specific industrial or maintenance context. The solicitation is issued by Nashville Electric Service under solicitation number Z4928, targeted toward state, local, or educational government buyers, with performance expected in Nashville, Tennessee. The opportunity was posted on August 4, 2026, and responses must be submitted by August 11, 2026, at 7:00 PM local time. Procurement contact for the solicitation is Shanna Faulk, who can be reached via email at sfaulk@nespower.com or by phone at 615-747-3578. The agency, operating under the Tennessee state government structure, has not designated a specific set-aside program or NAICS code for this procurement. Interested vendors must submit proposals through the official vendor portal accessible at the provided uiLink, ensuring compliance with all technical requirements and approved manufacturer specifications. All items must meet the exact thread form, flute count, and tolerance standards outlined to qualify for award.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # Z4927

Nashville Electric Service is soliciting weather-resistant nylon cable ties designed for outdoor use, featuring a 0.50 inch width and 22 inch length with self-clinching capability and polypropylene construction. These cable ties must meet approved manufacturer specifications including TYTONT250M-0PP, TYTON111-01196, IDEAL41680, BURNDYCT250600RQ0, and PANDUITPRT6EH-C100 to ensure compatibility and durability in outdoor environments. The solicitation, identified as Z4927, was posted on August 4, 2026, with a response deadline of August 11, 2026 at 7:00 PM CT. The procurement falls under a state and local government (SLED) category and is being managed by the agency’s Tennessee operations based in Nashville. All bids must be submitted through the vendor portal at the provided link, and inquiries should be directed to Shanna Faulk, Procurement Contact, via email at sfaulk@nespower.com or phone at 615-747-3578.

Office Supplies (except Paper) Manufacturing

POSTED

about 22 hours ago

DEADLINE