This Combined Synopsis/Solicitation opportunity from Department Of Veterans Affairs was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

H146--Critical Water Testing Amendment to at LOS

Closed

36C25926Q0773Federal

Submission Closed09/18/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and the potential removal and disposal of approximately 600 square feet of asbestos-containing material from the gymnasium floor. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, and a final project completion report. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the combating of trafficking in persons. Subcontractors are also required to maintain a Unique Entity Identifier (UEI) for reporting purposes.

POSTED

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Construction Inspection and Quality Assurance

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Independent Quality Assurance and Certification ServicesThis subcontract for Independent Quality Assurance and Certification Services supports NAVSUP Weapon Systems Support projects by providing independent verification, calibration, and certification for Special Emphasis Level I materials. The scope of work includes performing hydrostatic testing, dye penetrant inspections, and tool calibration in accordance with ANSI/NCSL Z540.3, as well as the development of Objective Quality Evidence packages. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and utilize ANSI/ASQ Z1.4 sampling methods. Final deliverables consist of certified test reports and Certificates of Compliance. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NDT Inspection and Certification for Naval Pipe FittingsThis subcontract involves providing non-destructive testing and quality inspections for naval pipe fittings on Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing hydrostatic testing and dye penetrant inspections on production welds and weld repairs, ensuring strict adherence to MIL-STD-2035, MIL-I-45208, and MIL-STD-45662 standards. The selected provider must maintain ISO/IEC 17025 accreditation and utilize calibrated measurement tools to deliver formal NDT certification reports and signed inspection certificates. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by November 4, 2026, at 8:30 PM. This project focuses on critical quality assurance for prime contractors to ensure the structural integrity of naval components.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Calibration and Testing ServicesThe Precision Calibration and Testing Services subcontract involves performing calibration of test equipment and certified testing of repaired receiver-transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will utilize precision calibration laboratory equipment to verify that hardware performance aligns with specific technical specifications. All work must be conducted in strict compliance with a Quality Management System and applicable international, military, or industry calibration standards. The primary deliverables for this engagement include the provision of detailed test reports and calibration certificates. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Canopy Qualification Testing and EvaluationThe Canopy Qualification Testing and Evaluation subcontract involves providing independent laboratory testing and evaluation of canopy prototypes for prime contractors supporting US Air Force flight safety projects. The scope of work includes conducting form, fit, and function testing, environmental stress testing, optical clarity verification, and impact resistance testing utilizing ballistic rigs and environmental chambers. The successful provider must deliver comprehensive test reports and certification documents. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation and possess DD 2345/JCP access. This opportunity is issued by the Department of Defense under agency FA8212 Afsc Olh Pzaba with a NAICS code of 541380. The response deadline for this requirement is February 16, 2027.

FA8212 Afsc Olh Pzaba

POSTED

about 6 hours ago

DEADLINE

in 4 months

AI Contract Overview

Solicitation 36C25926Q0773, titled H146 Critical Water Testing Amendment to at LOS, is a combined contract opportunity issued by the Department of Veterans Affairs Network Contract Office 19. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541380. The primary purpose of this specific amendment is to provide the Limitations on Subcontracting form, which is a mandatory requirement for all submitted quotes. The response deadline for this opportunity is September 18, 2026. The contract process requires a comprehensive evaluation of potential vendors, including the submission of a Past Performance Questionnaire to assess reliability and previous work history. Additionally, the agreement is subject to the labor standards outlined in Wage Determination 2015-5489 Rev 30 for Utah, specifically covering Salt Lake and Tooele counties, to ensure compliance with prevailing wage rates and fringe benefits for various labor categories. The primary point of contact for this solicitation is Contract Officer Jacqueline O'Bryan, based in Greenwood Village, Colorado.