This Sources Sought opportunity from Department Of Veterans Affairs was posted on January 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

H165--Dosimetry Badges and Services for Amarillo VA Health Care System

Closed

36C25726Q0248Federal

Submission Closed01/29/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and the potential removal and disposal of approximately 600 square feet of asbestos-containing material from the gymnasium floor. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, and a final project completion report. This solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet containing a W-9 and self-certification, proof of insurance, and three references for similar projects by October 21, 2026. Award selection is based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, minimum wages, and the combating of trafficking in persons. Subcontractors are also required to maintain a Unique Entity Identifier (UEI) for reporting purposes.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Specialized Aerospace Testing & CalibrationThis subcontract for Specialized Aerospace Testing and Calibration supports NAVSUP Weapon Systems Support projects by providing final testing and inspection of refueling probes for prime contractors. The scope of work involves conducting rigorous testing in accordance with approved repair and overhaul manuals, utilizing special test equipment and calibrated measurement tools that adhere to ANSI/NCSL Z540 or ISO-10012-1 standards. The selected provider is responsible for delivering comprehensive technical documentation, including detailed test reports, dimensional readings, and RFI certification. This effort falls under NAICS code 541380 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Independent Quality Assurance and Certification ServicesThis subcontract for Independent Quality Assurance and Certification Services supports NAVSUP Weapon Systems Support projects by providing independent verification, calibration, and certification for Special Emphasis Level I materials. The scope of work includes performing hydrostatic testing, dye penetrant inspections, and tool calibration in accordance with ANSI/NCSL Z540.3, as well as the development of Objective Quality Evidence packages. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and utilize ANSI/ASQ Z1.4 sampling methods. Final deliverables consist of certified test reports and Certificates of Compliance. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NDT Inspection and Certification for Naval Pipe FittingsThis subcontract involves providing non-destructive testing and quality inspections for naval pipe fittings on Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing hydrostatic testing and dye penetrant inspections on production welds and weld repairs, ensuring strict adherence to MIL-STD-2035, MIL-I-45208, and MIL-STD-45662 standards. The selected provider must maintain ISO/IEC 17025 accreditation and utilize calibrated measurement tools to deliver formal NDT certification reports and signed inspection certificates. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by November 4, 2026, at 8:30 PM. This project focuses on critical quality assurance for prime contractors to ensure the structural integrity of naval components.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Calibration and Testing ServicesThe Precision Calibration and Testing Services subcontract involves performing calibration of test equipment and certified testing of repaired receiver-transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will utilize precision calibration laboratory equipment to verify that hardware performance aligns with specific technical specifications. All work must be conducted in strict compliance with a Quality Management System and applicable international, military, or industry calibration standards. The primary deliverables for this engagement include the provision of detailed test reports and calibration certificates. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

Canopy Qualification Testing and EvaluationThe Canopy Qualification Testing and Evaluation subcontract involves providing independent laboratory testing and evaluation of canopy prototypes for prime contractors supporting US Air Force flight safety projects. The scope of work includes conducting form, fit, and function testing, environmental stress testing, optical clarity verification, and impact resistance testing utilizing ballistic rigs and environmental chambers. The successful provider must deliver comprehensive test reports and certification documents. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation and possess DD 2345/JCP access. This opportunity is issued by the Department of Defense under agency FA8212 Afsc Olh Pzaba with a NAICS code of 541380. The response deadline for this requirement is February 16, 2027.

FA8212 Afsc Olh Pzaba

POSTED

DEADLINE

AAV Vector Characterization and Quantification ServicesThis subcontract opportunity is for AAV Vector Characterization and Quantification Services supporting biotechnology projects at the VA Harry S Truman Memorial Veterans Hospital under the Department of Veterans Affairs. The selected provider will deliver high-precision analytical testing to verify the purity and integrity of AAV vectors for prime contractors. Key technical requirements include performing fragment analysis of viral genomes and quantitative PCR for vector genome titration, utilizing Agilent Fragment Analyzers and qPCR platforms. The contractor is expected to adhere to GLP standards and provide formal Certificates of Analysis and quantification reports. The work will be performed in Columbia, Missouri, under NAICS code 541380. Interested parties must submit their responses by November 4, 2026.

POSTED

DEADLINE

Satellite Instrument Calibration and ValidationThe Satellite Instrument Calibration and Validation subcontract supports prime contractors on NASA Goddard Space Flight Center projects. The scope of work involves performing detailed performance analysis and calibration for satellite instruments, which includes providing calibration laboratory support and developing specialized strategies, techniques, and algorithms to address various hardware and software challenges. Key deliverables for this effort include comprehensive calibration reports, performance analysis data, and validated instrument algorithms. This opportunity is associated with NAICS code 541380 and will be performed in Greenbelt, Maryland. The solicitation was posted on October 21, 2026, with a response deadline set for December 4, 2026.

NASA Goddard Space Flight Center

POSTED

about 5 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Multiple Locations - See Statement of Work (SOW), TX

Set-Aside

NONE

Documents

DRAFT Statement of Work - Dosimetry Badges Amarillo VA Health Care System

6 pages · sow

High

36C25726Q0248 Sources Sought Notice for Dosimetry Badges and Services

3 pages · sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJan 21

Sources Sought

Response DeadlineJan 29

Deadline has passed

Submission Closed

01/29/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Contacts1 person available

OfficeSan Antonio, TX, 78240, USA

Organization / AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Office AddressSan Antonio, TX, 78240, USA

Contacts

Anitra CarterContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This is a Sources Sought Notice Only. This is NOT a solicitation for proposals, proposal abstracts, or quotations.
The Department of Veterans Affairs, Veterans Health Administration, Network Contracting Office (NCO) 17 is seeking sources for the following procurement:
Dosimetry Badges and Services; Contractor to provide Badges and services in accordance with the Statement of Work (SOW) (see attached Statement of Work).
NCO 17 is seeking sources from businesses that can provide these services. Businesses that can provide these services are encouraged to respond to the sources sought notice by contacting the point of contact. Interested businesses must respond to the POC before the closing date and time of the RFI to be considered. Interested businesses must identify their business name, System for Award Management Unique Entity Identifier (SAM UEI), Type of Business (i.e. Service-Disabled Veteran Owned (SDVOSB), Veteran Owned (VOSB), 8(a), HUBZone, Woman-Owned (WOSB), Large, etc.) and are encouraged to provide a capabilities statement (if readily available) with their response. All eligible businesses able to provide this service are encouraged to reply as this information may be used to determine potential set-asides for the above-noted requirement.
Send responses to the POC email listed below and responses email subject line shall state: 36C25726Q0248, Sources Sought Notice.
CS: Anitra Carter, anitra.carter@va.gov
DISCLAIMER: This notice is issued solely for informational and planning purposes and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Department of Veterans Affairs to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this notice.