Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HANDLE, EXTENSION

Active
SPE7L1-26-T-882XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of a HANDLE, EXTENSION with part number B300-264-19/2 and NSN 5340-01-352-9560, for a quantity of six units, to be delivered within ten days to a military installation in Illgesheim, Germany. All items must be shipped FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging and marking must comply with commercial standards as specified for medical acquisitions, superseding MIL-STD-129 in favor of Medical Marking Standard No. 1, which dictates unique labeling requirements to ensure traceability and compliance. Each unit must be sealed in protective packaging and enclosed in durable commercial shipping containers suitable for carrier transport at the lowest cost. Wood packaging materials are required to be heat-treated or kiln-dried in accordance with DoD regulations, and all shipments must adhere to DLA’s packaging guidelines as referenced on their official site. The contract is issued under solicitation SPE7L1-26-T-882X, with a response deadline of August 10, 2026, and a required delivery date of July 24, 2026. The primary point of contact for the acquisition is Kristina Derry, and the unit of issue is each, priced at $6.00 per unit. The end recipient is the Air DSSA AWCF SSF at Storck Barracks, Building 6503, with additional shipment instructions governed by DLA procedural notes C19 and C20.

General Info

Six HANDLE EXTENSION units, part B300-264-19/2, delivered by July 24, 2026, to Germany, FOB origin, medical marking, heat-treated wood.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-882X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HANDLE,EXTENSION
HANDLE, EXTENSION:
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ENVIRONMENTAL TECTONICS CORP.<(>,<)>
PART NO. B300-264-19/2.
ENVIRONMENTAL TECTONICS CORP 33714 P/N B300-264-19/2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017644019 0001 EA 6.000
NSN/MATERIAL:5340013529560
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:D3 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7L1-26-T-882X
SECTION B
PR: 7017644019 PRLI: 0001 CONT’D
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT
OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE
MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN
BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN
PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT
TREATMENT OF WPM SHALL BE THE ONLY METHODS
AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.
ADDITIONAL INFORMATION REGARDING DOD'S WPM
REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING
WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/
OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
SPE7L1-26-T-882X
SECTION B
PR: 7017644019 PRLI: 0001 CONT’D
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
WK4F8T
0012 AV HHC SSA ILLESHEIM
AIR DSSA AWCF SSF
STORCK BARRACKS BLDG 6503
ILLESHEIM 91471
DE
RDD(3-POS RDD)/ANMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DEST TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4F8T
0012 AV HHC SSA ILLESHEIM
AIR DSSA AWCF SSF
STORCK BARRACKS BLDG 6503
ILLESHEIM 91471
DE
MARKFOR
WK4F8T
0012 AV HHC SSA ILLESHEIM
AIR DSSA AWCF SSF
STORCK BARRACKS BLDG 6503
ILLESHEIM 91471
DE
M/F: (TCN) WK4F8T62020174
RDD: E
PROJ: 9GU TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L1-26-T-882X NSN/Part Number: 5340-01-352-9560 Quantity: 6 EA Purchase Request: 7017644019QTY: 6 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADEDThe item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAINThe contract pertains to the procurement of two solid plain disks with NSN 5340-01-005-1903 under solicitation SPE7L1-26-T-882P, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses are due by August 10, 2026. The item falls under NAICS code 332510, and the solicitation is governed by DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the provided web link. All technical and quality specifications referenced by R or I numbers are incorporated by reference and must be strictly adhered to. Sampling and inspection protocols must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with the manufacturer allowed to choose attribute or variable inspection methods unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; any unspecified attributes are deemed major. Acceptance criteria require zero non-conformances in the sample lot under MIL-STD-105/ASQ Z1.4 unless the contract specifies otherwise. Government identification must be removed from non-accepted supplies, and all provisions are subject to the revision of the DLA Master List in effect at the relevant solicitation or award date. Contact for inquiries is Michael Nordahl at dla.flbc2prs@dla.mil or 445-737-0596.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of one blind rivet, identified by NSN 5320-00-451-9167, under solicitation SPE4A6-26-T-10AH, issued by the ASC Commodities Division of the Department of Defense. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with hardware manufactured after the solicitation date required to adhere to the current revision of the governing standard. Past production to prior revisions remains acceptable. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. Packaging must meet DLA requirements, and any non-accepted supplies must have government identification removed. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and NAVSEA-approved chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The delivery timeline is 224 days after order, with performance designated at Hill AFB, Utah, and responses due by August 5, 2026. The solicitation is fully competitive under federal specification and is open to all eligible suppliers through the DIBBS procurement portal.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR CThe contract is for the procurement of five units of BRACKET, VEHICULAR C with NSN 2590-01-583-1193 and part number 3801940 from OSHKOSH DEFENSE LLC, under solicitation SPE7L0-26-T-0386. Delivery is required within five days FOB origin at a unit price of $5.00, totaling $25.00, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951, and packaging must adhere strictly to MIL-STD-129 and RP001 packaging standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must be marked and labeled in compliance with DLA requirements, with palletization following RP001 guidelines. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1, Building 552, Texarkana, TX. The required delivery date is July 29, 2026, and the item is to be inspected and accepted at the destination. Government-use identifiers and tracking codes such as W45G18, TCN W45G18620500XF, RDD 244, and PROJ TP 1 are encoded for logistics and accountability purposes.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, BLOCK, SECTIONThis contract pertains to the procurement of two units of CLAMP, BLOCK, SECTION with NSN 5340-01-356-7179, under solicitation SPE7L1-26-T-884D, with a response deadline of August 10, 2026, and a delivery requirement within five days after delivery order issuance. Full and open competition applies, and the work falls under NAICS code 332510 with the Department of Defense’s Land Supply Chain as the contracting agency. Compliance with cybersecurity requirements mandates that the vendor be a CMMC Level 2 certified Third-Party Assessment Organization, ensuring adherence to specified security controls. The contract incorporates technical and quality standards from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging, handling, and disposal of supplies must align with DLA directives, and government identification markings must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior government authorization for any transfer to foreign persons or entities, whether inside or outside the U.S., and DFARS 252.225-7048 governs its handling. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval prior to accessing controlled technical data. The point of contact for inquiries is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREADThe contract is for one machine thread plug with NSN 5365-01-180-6745, identified by purchase request 7017607599, under solicitation SPE4A0-26-T-4073, with a required delivery in five days by July 23, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. The product must comply with DLA packaging standards per RP001, including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and specific packaging codes indicating preservation method 33, dry storage, and use of unit packaging with no intermediate containers. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and unspecifed attributes are treated as major. The item must be marked per MIL-STD-129 with no special markings, palletized according to DLA guidelines, and shipped FOB origin with no quantity variance allowed. Delivery is to Prince Sultan Air Base, Saudi Arabia, with transportation governed by DLA procedural notes C19 and C20. The point of contact is Danita Davis, and the unit of issue is each, with government use codes indicating procurement and distribution routing.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESSThe contract specifies the procurement of one unit of a cover and access item identified by NSN 5340-12-359-4324 and part number 868201001 under solicitation SPE7L1-26-T-884H. The delivery must occur within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and the item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override general industry standards like ASTM D3951. If the item is hazardous per Fed-Std-313, it must meet TQ requirement IP025; if non-hazardous, it must be commercially packaged under ASTM D3951 while still adhering to DLA’s higher-priority specifications. All packaging must be labeled per MIL-STD-129, and palletization must follow RP001 guidelines. The item must be shipped traceably via freight to Fort Hood, Texas, using the specified destination address and must not be sent via parcel post. The required delivery date is July 27, 2026, and the contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with Michael Nordahl listed as the primary point of contact. Government-use codes and shipment identifiers are included for internal tracking and logistics.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVETThe contract is for 328 units of a threaded pin-rivet collar, identified by NSN 5320-00-631-3429, under solicitation SPE4A6-26-T-10AF issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is due 256 days after contract award, with responses due by August 5, 2026. The item falls under NAICS code 332510 and is procured for performance at New Cumberland, Pennsylvania. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons, including employees and subsidiaries, with access limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and obtained approval. CMMC Level 2 certification is mandatory for third-party assessors, and DLA packaging standards apply. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs marking. Bare item marking and physical identification requirements are enforced. The sole point of contact is Susan Barlow, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTROL
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTIONThe contract specifies the procurement of a fuel injection nozzle with part number 27910-10 and NSN 2910013183720, quantity of eight units, to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containerization, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to the Assault Craft Unit 4 in Virginia Beach, Virginia, with explicit instructions to avoid parcel post and ship via the fastest traceable means. The required delivery date is July 10, 2026, with inspection and acceptance occurring at the destination. The contract includes detailed government-use identifiers, freight shipping information, and a point of contact for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThe contract pertains to the procurement of one unit of a specific item identified by NSN 5340015750820 and part number AT364985 under solicitation SPE7L1-26-T-885S, with a required delivery within 20 days of award. The item must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under FED-STD-313, it must be packed in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped by traceable means, not parcel post, and delivered to the designated military facility at Camp Lejeune, NC, using the specified freight address and contact information. The required delivery date is July 24, 2026, and the contract includes government-only identifiers and logistics codes for internal tracking and distribution. All technical and quality specifications referenced in the DLA Master List are binding and take precedence over any standard commercial practices.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
LIFTING TOOL, HUB ANThe contract solicits 14 units of a Hub and Final Drive Lifting Tool with NSN 4910-01-127-2712, under solicitation number SPE7L1-26-Q-1382, with a required delivery deadline 320 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The item must comply with DLA packaging requirements and严禁 the use of Class I ozone-depleting chemicals, requiring approval for any alternative substances unless explicitly permitted by specifications. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons anywhere, including U.S.-based subsidiaries or employees, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA export control training, and formal authorization from DLA. The place of performance is specified as Texarkana, Texas, 75507-5000, and the contracting officer is Adam Howell, reachable via email and phone provided. The NAICS code is 333310, and the solicitation was posted on July 28, 2026, with responses due by August 4, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
TAPPET, ENGINE POPPEThe contract is for the procurement of six TAPPET, ENGINE POPPE LIFTER, VALVE units with NSN 2815-00-450-9341 and part number 7S3161 supplied by CATERPILLAR INC. Each unit has a fixed price of $6.00, resulting in a total contract value of $36.00, with delivery required within five days of award at FOB origin. The items must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, adhering to the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging must follow RP001 guidelines, with palletization conforming to specified DLA requirements and no parcel post permitted for shipment. Deliveries are to be routed to the government facility at Fort Eustis, Virginia, with a required delivery date of July 27, 2026, and must be sent by the fastest traceable means. The contract enforces zero variance in quantity and mandates inspection and acceptance at destination. Government-specific identifiers and markings are required, and all supplies must be labeled and documented according to DLA protocols, including the use of the provided military freight address, mark for details, and tracking information. The solicitation number is SPE7L1-26-T-883V, issued under the Department of Defense’s Land Supply Chain, with procurement subject to federal acquisition regulations and technical directives.
Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract is for one spacer ring identified by NSN 5365-15-120-2240 and part number 60154625 manufactured by IVECO DEFENCE VEHICLES S.P.A., classified as a commercial item under DoD procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requires zero non-conformances unless otherwise directed. Delivery is FOB origin within 20 days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated military destination in Camp Lejeune, North Carolina. The contract is issued under solicitation SPE7L1-26-T-884G with a required delivery date of July 22, 2026, and ties to a purchase request number 7017607337 under a single unit of issue at a fixed price of $1.00. Government-specific data codes and shipping instructions are provided for logistics coordination, with procurement oversight by the Department of Defense’s Land Supply Chain through Katherine Woods as the point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336350
New
DIBBS
GEAR SUBASSEMBLY, SPThe contract pertains to the procurement of one gear subassembly with NSN 3010-01-570-7423 and part number A88245047, issued under solicitation SPE7L1-26-T-883Q by the Department of Defense’s Land Supply Chain. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. The item must be palletized per DLA packaging standards and shipped via traceable means, excluding parcel post, to the designated delivery point in Burlington, Kentucky. The unit of issue is each, with a total price of one unit at $1.00, and the required delivery date is July 29, 2026. All markings, labels, and documentation must follow specified government formatting guidelines, including the inclusion of the government procurement request number and designated shipping identifiers.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
PARTS KIT, AIR-HYDRAThe contract is for a Parts Kit, Hydraulic Brake Slave Cylinder with NSN 2530-00-204-9906, quantity of 33 units, under Purchase Request 7017385501, with delivery required within 185 days after award. The solicitation number is SPE7L1-26-Q-1381, issued on July 28, 2026, with responses due by August 4, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent quality controls including tailored higher-level contract quality requirements, configuration change management via engineering change proposals and variance requests, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to associated technical data, restricting its disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to controlled data is limited to contractors approved by DLA who hold a valid US/Canada Joint Certification Program credential, have completed mandated training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tracy, California, with the contracting office under the Department of Defense’s Land Supply Chain, and the primary point of contact is Adam Howell.
Motor Vehicle Brake System Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
CABLE AND CONDUIT AThe contract pertains to the procurement of one unit of a vehicular cable and conduit assembly identified by NSN 2530015596286 and part number 15300, supplied by SILVER EAGLE MANUFACTURING CO, under solicitation SPE7L1-26-T-885M. Delivery is required within 20 days from the award date with FOB origin terms, and no variance in quantity is permitted. The item must be packaged and preserved in strict compliance with MIL-STD-2073-1E and NEMA-WC26 standards, with marking governed by MIL-STD-129 and special preservation method ZZ as defined in SPE7L1-26-T-885M. The product is to be delivered to the designated government facility at 3920 KIRKWOOD HWY, WILMINGTON DE 19808-5194, with shipment required via the fastest traceable means and parcel post expressly prohibited. Inspection and acceptance occur at destination, and all packaging and shipping of hazardous materials must adhere to IP025 specifications. Preservation, packaging, and packing methods follow the technical requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract includes precise government-only identifiers and logistical codes including TCN M2232061980033, RDD, and project code TP 2, with the original required delivery date set for July 23, 2026. Point of contact for procurement inquiries is Kristina Derry at DLA.
Other Motor Vehicle Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336310
New
DIBBS
O-RINGThis contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1078 and part number 391 2882 499 from EATON CORP FLUID POWER OPNS, under solicitation SPE7L1-26-T-884B. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-117, TYPE II, CLASS C, STYLE 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation. Marking shall follow MIL-STD-129, including special instruction “20 -20 Do not bend,” and palletization must meet DLA packaging requirements. The supply is destined for Prince Sultan Air Base, Saudi Arabia, with freight logistics governed by DLAD PROC NOTES C19 and C20. Technical and quality requirements referenced via R and I numbers are defined in the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and the purchase request number is 7017636739. The contract includes federal supply classification data and imposes hazardous materials shipping compliance under IP025. The original required delivery date is July 27, 2026, with a response deadline of August 10, 2026.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details