Top

Handpiece and Consumables Supply (Future Replenishment)

Active

Federal

Response Deadline08/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)View Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

White City, OR, 975032, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of replacement handpieces, lightguides, safety goggles, and calibration tools for the dermatologic treatment system as needed.

Similar Contracts

Same NAICS industry code

NAICS: 423450

New

DIBBS

SAFETY BOX AND INCINER

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

BATTERY, ANALYZER, RECHA

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Naval Medical Research Center

POSTED

DEADLINE

Direct-to-Consumer Distribution of HIV and other STI Self-TestsThe Centers for Disease Control and Prevention’s National Center for HIV, Viral Hepatitis, STD, and TB Prevention is seeking to enhance a web-based ordering and distribution system to deliver at least 1.5 million HIV and other sexually transmitted infection self-tests directly to individuals in communities disproportionately affected by HIV. This initiative aims to increase access to testing, promote early detection, and facilitate timely linkage to treatment and preventive services, thereby reducing transmission rates and improving health outcomes. The program emphasizes expanding self-testing options as a strategy to reach underserved populations and strengthen public health responses to HIV and STIs. The opportunity, titled Direct-to-Consumer Distribution of HIV and other STI Self-Tests, was posted on July 27, 2026, and is part of a federal funding forecast under the Department of Health and Human Services. Interested parties can direct inquiries to Jessica Keralis via email at hrbnofo@cdc.gov or by phone at 301-458-4132. While no specific solicitation number or North American Industry Classification System code is provided, the emphasis is on optimizing an existing infrastructure to maximize reach, efficiency, and impact in high-burden areas, ensuring equitable access to critical health resources.

Centers For Disease Control - Nchhstp

POSTED

DEADLINE

Medical Product Palletization & Unit PackagingThe contract requires the palletization and packaging of prefilled syringes in strict accordance with DLA RP001 and the Medical Marking Standard No. 1, ensuring full compliance with unit identification and quantity unit requirements. All work must be executed to meet rigorous defense medical supply standards, with precise attention to labeling, packaging integrity, and logistical readiness for military distribution. The performance location is designated as Fort Bragg, North Carolina, with a zip code of 28310, and the work falls under the NAICS code 423450 for medical and dental equipment and supplies merchant wholesalers. This is a subcontract opportunity posted by the Department of Defense through the Medical Supply Chain Pharm FSA, with a response deadline of August 3, 2026. The solicitation is open for submissions through the DIBBS system and targets qualified subcontractors capable of handling sensitive medical products under defense-specific protocols. There is no specified set-aside classification, and the contract is structured to support the Department of Defense’s medical logistics infrastructure by ensuring prefilled syringes are properly prepared for storage, transport, and field deployment. Compliance with all technical and regulatory mandates is non-negotiable and must be demonstrated during proposal submission and execution.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Supply of Commercial ER-REBOA Plus Training CathetersThe contract seeks the supply of off-the-shelf ER-REBOA Plus non-sterile training catheters as a commercial item, ensuring compliance with WAWF and DFARS Appendix F requirements. These catheters are intended for training purposes and must meet standardized specifications without requiring customization or sterile processing. The solicitation is issued under the NAICS code 423450, reflecting its classification within medical equipment and supplies wholesale, and is structured as a subcontract within the Department of Defense’s Medical Supply Chain FSH framework. Performance is designated for Lackland AFB, Texas, with a delivery location specified by the zip code 78236-5638. The opportunity was posted on July 26, 2026, and responses are due by August 3, 2026, providing a seven-day window for offerors to submit proposals. The contract does not specify a set-aside type, indicating it is open to all eligible commercial suppliers. Access to detailed submission guidelines is available through the DIBBS platform using the provided reference number SPE2DH26T5511.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

NSN 6515016611786 SupplyThe contract involves the supply of NSN 6515016611786, a medical or utility component, to two U.S. military installations: Fort Stewart in Georgia and Fort Indiantown Gap in Pennsylvania. All shipments must adhere to military marking standards to ensure proper handling and identification throughout the logistics chain. The solicitation is classified as a subcontract under NAICS code 423450, which pertains to wholesale trade of medical and surgical equipment and supplies. The opportunity was posted on July 26, 2026, with responses required by August 3, 2026, indicating a compressed timeline for potential vendors to prepare and submit proposals. The contracting organization is the Medical Supply Chain MD Surg FSF under the Department of Defense, with the place of performance explicitly tied to Fort Stewart at the zip code 31314-5185. Full compliance with military shipping protocols and timely delivery to both locations is essential, and all interested parties must access the official solicitation via the provided DIBBS link for detailed submission requirements.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

APRON, X-RAY PROTECTIVEThe contract is for two X-ray protective aprons, each designed as a sleeveless, form-fitting coat with tie tapes for secure closure. The aprons feature a lightweight back weighing 10 pounds and measure 38 inches in length and 24 inches in width. They must be constructed from lead-impregnated plastic or a combination of lead and tin impregnated plastic, providing radiation protection equivalent to a minimum of 0.5mm of pure lead. The unit of issue is each, and delivery is required within 10 days of award. The aprons must comply with DLA packaging requirements and all referenced technical and quality standards listed in the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6532-00-935-9765, and the purchase request number is 7017612566. The solicitation, issued under contract SPE2DS-26-T-272F, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance required at Fort Bliss, Texas. The primary point of contact is Tiffany Parker, reachable via phone and email provided. The response deadline for bids is August 3, 2026, and the solicitation was posted on July 26, 2026. Any non-accepted supplies must have government identification removed prior to return.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BUCKET, KICK, SURGICAThe contract specifies the procurement of a surgical waste bucket, model BUCKET, KICK, SURGICA, with a National Stock Number 6530-01-501-0551, quantity of one unit, for use in operating rooms with a capacity of thirteen quarts. The bucket features a 360-degree rubber bumper, a stainless steel lid, and four casters, designed for safe and convenient waste collection. All packaging must comply with commercial standards as outlined in the procurement document, requiring each unit to be sealed in a protective container that prevents damage or breakage, and shipped in suitable exterior containers for safe delivery via common carrier at the lowest possible rate to the designated delivery point in APO, 09094-3219. Marking must strictly adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and documentation for this standard is available through DLA Troop Support. The item must be sourced with the correct part number and supplier identified by the bidder. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must conform to DLA’s procurement guidelines, government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. Delivery is required within 20 days of award, with the solicitation issued under SPE2DH-26-T-5491, opening on July 26, 2026, and closing on August 3, 2026, under the NAICS code 423450 for medical and dental equipment and supplies wholesale.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CYLINDER, GRADUATED, LABThe contract specifies the procurement of a single 100 mL graduated laboratory cylinder made of glass, with a single scale, pour-out mouth, and dimensions of 29 mm wide by 255 mm high. The item is identified by NSN 6640-00-420-0000 and is to be delivered within 20 days of award under solicitation SPE2DS-26-T-272H. Packaging must comply with commercial standards as outlined in DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a container that protects against damage or breakage and is shipped in suitable exterior containers to guarantee safe delivery at the lowest carrier rate to the FPO destination. All markings must adhere to Medical Marking Standard No. 1, which replaces references to MIL-STD-129, and bidders must provide the source and part number. The acquisition falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The response deadline is August 3, 2026, and the contract includes provisions for the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SODIUM CHLORIDE INJSodium Chloride Injection in 10 mL single-dose, preservative-free, latex-free syringes is being procured under contract SPE2DP-26-T-4287, with a total requirement of 47 packages, each containing 30 syringes, for a combined total of 1,410 syringes. The item is classified under NSN 6505-01-595-5160, with a unit of issue of PG, where one PG equals 30 units. The product must meet strict packaging and labeling requirements per the Medical Marking Standard No. 1, superseding MIL-STD-129, and must be commercially packaged in compliance with ASTM D3951 unless classified as hazardous, in which case IP025 requirements apply. All packaging must ensure protection from damage, be shipped via traceable freight methods excluding parcel post, and comply with DLA’s RP001 packaging standards. The product carries a non-extendable shelf life of 24 months and is regulated by the FDA, requiring official referral and confirmation prior to contract award. Deliveries are required within 20 days of contract award and must be FOB destination to multiple military locations including Fort Bragg, Fort Stewart, Fort Bliss, and others, as specified by distinct bulk break points. The contract includes five distinct line items corresponding to varying quantities per delivery point, with unit pricing set at $4.00 or $13.00 per PG depending on the CLIN, resulting in a total contract value of $219,400. Required delivery dates range from July 28 to July 29, 2026, with no允许数量偏差. All shipments must be properly marked with government identification, accompanied by valid tracking information, and delivered to designated military supply facilities. The contract is managed by the Department of Defense’s Medical Supply Chain, with specific oversight from the contracting officer and logistical coordination via designated military points of contact.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

BAG, URINE COLLECTIONThe contract specifies the procurement of 2 packages of disposable urine collection bags, each containing 10 units, for a total of 20 units. Each bag has a 2000 CC capacity, includes 182.88 cm (72 inch) tubing, and features a 400 mL urine meter with a white background and graduated markings for accurate measurement, along with a small burette chamber and a spring-loaded sample port compatible with Foley catheters. Each package also includes a 10 CC prefilled syringe, 18 French size, intended for catheter maintenance or irrigation. All items are designated as disposable and must meet commercial packaging standards, with each unit sealed in a protective container and shipped in exterior containers suitable for safe transport via common carrier at the lowest possible rate. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all supplies must be properly labeled according to the specified standard. The NSN is 6515-01-406-7748 with a delivery requirement within 20 days of award. The solicitation is issued under SPE2DS-26-T-271A by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance due at Scott AFB, zip 62225-5252, and responses due by August 3, 2026. Bidders must clearly state the source and part number being offered and ensure the product complies with all technical and quality requirements referenced in the DLA Master List. Packaging, marking, and quality standards as defined under RP001 and RQ011 are mandatory, including the removal of government identification from non-accepted supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days

View Details

More opportunities from Department Of Veterans Affairs → 260-NETWORK Contract Office 20 (36C260)

Same awarding agency

NAICS: 811212

New

Federal

Technical Support and Maintenance Services

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Clinical Training for Medical Staff

Professional and Management Development Training

POSTED

DEADLINE

On-Site Installation and Calibration Services

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Medical Laser and IPL System Supply

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Reference Laboratory MRD Testing PDX

POSTED

DEADLINE

Virtual Reality Software License Warranty and Operator

Professional and Management Development Training

POSTED

DEADLINE

Boiler Plant Safety Testing

Facilities Support Services

POSTED

DEADLINE

Virtual Reality Software License Warranty and Operator

Professional and Management Development Training

POSTED

DEADLINE

Z2DA--687-24-101 Demolish Regrade Connecting Corridor

Site Preparation Contractors

POSTED

DEADLINE

6515--Dermatology Laser 36C26026Q0864The Veterans Administration is seeking a brand name or equal multi-platform dermatologic treatment system capable of delivering a range of light-based therapies using both intense pulsed light and at least one true laser modality, specifically equivalent to the Lumenis BE Stellar M22 system. The equipment must treat acne, rosacea, pigmentation, and vascular lesions using non-ablative fractional laser technology with Optimal Pulse Technology and multiple sequential pulsing, both incorporating cooling mechanisms. The system must include a mobile wheeled base, laser and IPL handpieces, multiple filters, safety glasses for providers and patients, handpiece cradles, coupling gel, patient brochures, Nd:YAG and ResurFX handpieces with associated safety gear, calibration tools, lightguides, distilled water, activation files, starter and upgrade kits, power cords, and all necessary documentation. Physical specifications require the unit to be no greater than 55cm wide, 60cm deep, and 70cm high, weighing no more than 68 kg, with an operating temperature range of 10–30°C and storage tolerance from -20 to 70°C. The system must be delivered by December 2026, with installation, calibration, and one day of on-site clinical training included. The solicitation is issued as an unrestricted request for quotation under FAR Subpart 12.202, with a firm-fixed price contract anticipated. The NAICS code is 334510 with a small business size standard of 1,250 employees, and a non-manufacturer rule waiver is in effect. All respondents must clearly demonstrate compliance with all salient characteristics, as failure to meet these requirements disqualifies pricing evaluation. Contracts are subject to numerous clauses covering whistleblower rights, subcontracting restrictions, cybersecurity, personnel vetting, procurement of safe technology, prohibitions on products from covered foreign entities such as China and entities like Huawei, ZTE, Hikvision, Dahua, and Kaspersky, and bans on FASC-prohibited unmanned aircraft systems. Contractors must comply with VA-specific personnel identity verification, background investigations, and PIV card protocols, and must flow down these requirements to subcontractors. Offers require certification of compliance with trade agreements, affirming that all end products are U.S.-made or from designated countries unless otherwise listed. Quotes must be submitted by August 11, 2026, and accompanied by product documentation and a signed statement confirming acceptance of all

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Condensate Vacuum Line RepairThe contract solicitates services for the maintenance and repair of vertical transportation systems, including elevators, dumbwaiters, and cartlifts, at the Portland VA Medical Center and Vancouver Division of the Department of Veterans Affairs, with a primary administrative delivery point in Tacoma, WA. The work requires comprehensive preventive and corrective maintenance, 24/7 emergency response, adherence to ASME A17.1/A17.2/A17.3, ASME QEI-1, NFPA 70, 72, and 101 standards, and full compliance with VA-specific policies and OSHA regulations. The contract structure includes a base year starting October 1, 2026, and four one-year options extending through September 30, 2031, with a firm-fixed-price structure inferred from the use of FAR 52.212-4. Pricing details are not provided in the solicitation, as offerors are expected to submit their own bids, and award will be based on a trade-off evaluation weighing past performance and price equally, with technically acceptable proposals required regardless of cost. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSBC), and all offerors must certify their size status, UEI, and socioeconomic status through FAR 52.219-1, with joint venture participants required to disclose their UEIs. Contractors must provide workers’ compensation, general liability, and automobile liability insurance with minimum limits, comply with electronic invoicing via VAAR 852.232-72 and payment via EFT through SAM, and ensure all personnel accessing federal facilities have personal identity verification (PIV) compliance. The contract mandates 24-hour advance notice for planned work interruptions and prohibits contractors from enforcing confidentiality agreements that restrict reporting of fraud or abuse. Performance will be inspected and accepted on-site by the Government at the Portland and Vancouver locations, with final acceptance tied to compliance with stringent safety and operational standards. The contracting officer is Wendy Duval, and proposals are due by August 6, 2026, with electronic submission expected through federal systems.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Parts Supply and Material ManagementThis contract requires the supply of original manufacturer or approved-equal elevator components with full traceability and inspection readiness to support ongoing maintenance and repair operations, ensuring reliability and compliance with safety standards. All materials must be delivered with rapid response capabilities to minimize downtime and maintain operational continuity, and the vendor must demonstrate robust supply chain controls to confirm authenticity and provenance of every part. The contract is structured as a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 423690, which covers miscellaneous durable goods merchant wholesalers. Performance is centered in Tacoma, Washington, with a zip code of 98493, and responses are due by August 6, 2026, following a posting date of July 23, 2026. The contracting office is the 260-NETWORK Contract Office 20 under the Department of Veterans Affairs, indicating this procurement supports federal infrastructure needs related to VA facilities.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 9 days

View Details