HANDWHEEL ASSEMBLY

HANDWHEEL ASSEMBLY
HANDWHEEL ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IDENTIFY TO:
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
TDP Rev B Gen 2 IAW BASIC DRAWING NR 81996 1560-EG-050 REVISION NR A3 DTD 10/06/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-135 REVISION NR A DTD 09/27/1974
SPE8EF-27-T-0227
SECTION B
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-136 REVISION NR B DTD 09/27/1974 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-093 REVISION NR A DTD 07/10/1973 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 4920-EG-024 REVISION NR DTD 04/27/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-050 REVISION NR A DTD 01/17/1973 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-050 REVISION NR C DTD 05/05/2026 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-049 REVISION NR DTD 10/06/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 4920-EG-024 REVISION NR A DTD 02/14/2013 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-048 REVISION NR DTD 09/26/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-090 REVISION NR DTD 10/06/1972 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-047 REVISION NR D DTD 04/04/1988 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-089 REVISION NR A DTD 01/15/1974 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-091 REVISION NR A DTD 09/30/1984 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-093A REVISION NR A DTD 08/10/2012 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-050A REVISION NR DTD 04/23/2026
SPE8EF-27-T-0227
SECTION B
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-135 REVISION NR A DTD 01/14/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 81996 1560-EG-136 REVISION NR B DTD 01/14/2014 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018907564 0001 EA 1.000
NSN/MATERIAL:1730014324105
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
FORT CAMPBELL KY 42223-5000
US
SPE8EF-27-T-0227
SECTION B
PR: 7018907564 PRLI: 0001 CONT’D
RDD 555 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
FORT CAMPBELL KY 42223-5000
US
MARKFOR
W80N5C
0160 AV HQ HHC SPECIAL OPE
AWCF SSF
BLDG 7244 NIGHTSTALKER WAY
FORT CAMPBELL KY 42223-5000
US
M/F: (TCN) W80N5C61000401
RDD: 555
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:04/15/2026
SPE8EF-27-T-0227 NSN/Part Number: 1730-01-432-4105 Quantity: 1 EA Purchase Request: 7018907564QTY: 1 Delivery: 10 days ADO