This Solicitation opportunity from Department Of Defense was posted on March 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HARDENER, ADHESIVE

Awarded

SPE4A6-26-T-994EFederal

Submission Closed03/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325520

New

DIBBS

Corrosion Resistant Coating SupplierThis subcontract opportunity through DLA DIST SAN JOAQUIN requires a supplier to provide 15 pints of chemically treated corrosion-resistant coating. The material must conform to specification MIL-DTL-81706B(1) Revision B and be identified by NSN 8030016269987. The supplier will support prime contractors delivering DLA Troop Support Construction and Equipment contracts and is responsible for managing logistics for FOB Destination delivery. Eligible bidders must possess a valid CAGE code and active SAM registration. The performance location for this contract is in Tracy, California. Interested parties must submit their responses by the deadline of November 3, 2026.

POSTED

DEADLINE

Supply of Specialized Sealant (NSN 8030014651390)This subcontract involves the supply of specialized sealant, identified by NSN 8030014651390, to support prime contractors under Defense Logistics Agency Troop Support Construction and Equipment contracts. The selected provider must ensure all materials meet strict NSN specifications and are packaged according to MIL-STD-2073-1E. Additionally, the sealant must be maintained at a room temperature between 60 and 80 degrees Fahrenheit to ensure product integrity. The agreement requires the delivery of two units FOB Destination to Fort Carson, Colorado, within five days of the contract award. Managed under NAICS code 325520 for the Department of Defense, the contract focuses on the timely and compliant shipment of these specialized units to meet agency requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Adhesive Primer (NSN 8040-01-644-9395)This subcontract through the Defense Logistics Agency involves the supply of Type I adhesive primer, identified by NSN 8040-01-644-9395, for prime contractors supporting DLA Troop Support. The supplier must ensure the product meets the DLA Master List of Technical and Quality Requirements and adheres to strict temperature-controlled logistics, maintaining storage and shipment conditions between 60 and 80 degrees Fahrenheit. The scope of work requires the delivery of one pint of primer to Fort Campbell, Kentucky. All items must be packaged and marked in accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. This requirement falls under NAICS code 325520 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Sealing Compound (NSN 8030-01-309-1446)This subcontract involves the supply of specialized sealing compound, identified by NSN 8030013091446, to prime contractors supporting Defense Logistics Agency supply contracts. The agreement requires the delivery of two units with a minimum shelf life of nine months. All materials must strictly adhere to MIL-R-47211A(1) Revision A and meet NAVAIR aircraft launch and recovery equipment traceability standards. The supplier is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, all safety data sheets and labels must be compliant with GHS and Federal Standard No. 313-E. Performance for this contract is centered in Patuxent River, with the procurement falling under NAICS code 325520.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Adhesive (NSN 8040-00-858-9798)This subcontract involves the procurement and delivery of 2,000 kits of specialized adhesive, identified by NSN 8040008589798, to support prime contractors under DLA Troop Support supply contracts. The Department of Defense, specifically DLA DIST OKC KO CP, requires the materials to be delivered to Tinker AFB by October 29, 2026, utilizing the fastest traceable means of transport. Compliance with hazardous material labeling is mandatory per DFARS 252.223-7001 and Federal Standard No. 313. Additionally, the successful contractor must maintain active registrations in both the System for Award Management and the Wide Area Workflow system to facilitate contract administration and payment.

POSTED

DEADLINE

Gray Adhesive Supplier (NSN 8040-01-415-7040)This subcontract involves the supply of gray adhesive for prime contractors supporting Defense Logistics Agency contracts. The requirement is for one box containing six 1-pint kits that adhere to NSN 8040-01-415-7040 specifications, featuring a non-extendable shelf life of 24 months. All materials must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 using Special Marking Code 32, with labels and safety data sheets compliant with 29 CFR 1910.1200. The contract mandates strict adherence to the Buy American Act and requires delivery FOB Destination to Fort Campbell, Kentucky. Classified under NAICS code 325520, the opportunity was posted on October 28, 2026, with a response deadline of November 3, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Specialized Putty (NSN 8030-01-599-2182)This subcontract involves the procurement of specialized putty, identified by NSN 8030-01-599-2182, to support prime contractors fulfilling DLA Troop Support supply contracts. The Department of Defense, specifically DLA DIST SAN JOAQUIN, requires 15 lbs of material with a quantity variance allowance of plus or minus 10 percent. All supplies must be of domestic origin and strictly adhere to NSN specifications. Compliance with military standards is mandatory, with packaging required per MIL-STD-2073-1E and marking required per MIL-STD-129. The place of performance for this contract is located in Tracy, zip code 95304-5000. The solicitation was posted on October 28, 2026, with a response deadline of November 3, 2026, under NAICS code 325520.

POSTED

DEADLINE

Specialized Adhesive Supplier (NSN 8040-01-129-2558)This subcontract involves the manufacture or sourcing of specialized adhesive meeting NSN 8040-01-129-2558 specifications to support prime contractors delivering DLA supply contracts. The supplier is responsible for providing 12 pints of adhesive, packaged in one-pint cans according to MIL-STD-2073-1E and MIL-STD-129 standards. The product must have a non-extendable shelf life of 12 months and include all necessary labels and safety data sheets in compliance with 29 CFR 1910.1200 and Federal Standard No. 313-E. The contract is managed under NAICS code 325520 for the Department of Defense, specifically for DLA Distribution San Joaquin. Delivery is required FOB Destination to the facility located in Tracy, California. Interested parties must adhere to the response deadline of November 3, 2026.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0196

Solicitation SPE8ES-27-T-0196 is a request for quotations for the procurement of adhesive, identified by NSN 8040-01-129-2558. The requirement consists of 12 pints, with each unit packaged in a one-pint can. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 20, 2027, and an original required delivery date of April 3, 2027. The contract specifies a non-extendable shelf life of 12 months for Type I (Code H) items. Due to the hazardous nature of the material, the contractor must comply with strict safety and labeling standards. This includes the submission of Safety Data Sheets (SDS) and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for lot or batch numbers and special marking code 32. Palletization must follow DLA packaging requirements RP001. The procurement is governed by various FAR and DFARS clauses, including those related to cybersecurity safeguarding of covered defense information, the Buy American Act, and the prohibition of hexavalent chromium. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Evaluation may include a price preference for HUBZone concerns, and the successful offeror must be registered in the System for Award Management (SAM).

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0207

Solicitation SPE8ES-27-T-0207 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one unit of yellow adhesive, identified by NSN 8040-01-663-3917. The requirement specifies a 5.0-ounce size and includes a shelf life requirement of 12 months, which is extendable. Delivery is required within 20 days of award, with a required delivery date of October 29, 2026. The shipment is designated as FOB Destination to Nellis Air Force Base, Nevada, and must be transported via the fastest traceable means, excluding parcel post. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Special Marking Code 33 for shelf life. Because the item is classified as hazardous material, the supplier must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200, which requires the submission of Safety Data Sheets and specific hazard labels for approval prior to award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contract incorporates cybersecurity reporting standards under DFARS 252.204-7012 and requires offerors to validate their socioeconomic status and telecommunications certifications via the System for Award Management.

Defense Logistics Agency

POSTED

DEADLINE

TAPE, INSULATION, ELE

Solicitation # SPE4A0-27-T-0378

Solicitation SPE4A0-27-T-0378 is a request for quotations issued by the Defense Logistics Agency, Department of Defense, for the procurement of electrical insulation tape, identified by NSN 5970-01-012-4280. The requirement consists of multiple line items, with each unit of issue containing 36 yards of tape. Delivery is required within five days of award, with specific delivery dates set for September 2 and October 1, 2026. Shipments are directed to locations in Peoria, Illinois, and Tyndall Air Force Base, Florida, with FOB, inspection, and acceptance all occurring at the point of origin. The procurement is subject to strict quality and manufacturing standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, and items must adhere to BASIC CID A-A-59474D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a specific prohibition on the use of mercury or mercury compounds. Notably, the government will not evaluate or award contracts to offerors providing items produced via additive manufacturing. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must be registered in the System for Award Management and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements. Price evaluation preferences are available for certified HUBZone small business concerns, and quotes should be submitted via DIBBS.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0216

Solicitation SPE8ES-27-T-0216 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 15 pounds of putty, identified by NSN 8030-01-599-2182. The requirement is for 1-pound cans with a non-extendable shelf life of 24 months. Delivery is required within 185 days, with a need ship date of May 8, 2027, and an original required delivery date of July 18, 2027. The shipment is FOB Destination to DLA Distribution San Joaquin in Tracy, California, with an allowable quantity variance of plus or minus 10 percent. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, which must include lot or batch numbers. Because the item is classified as hazardous material, the contractor must comply with IP025 and FAR 52.223-3 regarding identification and safety data. Inspection and acceptance will occur at the destination. The award process may be automated and includes a price evaluation preference for HUBZone concerns. All quotes must be submitted via the DLA Internet Bid Board System by November 3, 2026, and must include the quoter's CAGE code and completed representations and certifications.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

in 6 days

AI Contract Overview

The contract pertains to the procurement of a hardener adhesive, identified by the National Stock Number (NSN) 8040-01-519-6329, with a quantity of one kit required. The solicitation number is SPE4A6-26-T-994E, issued by the Department of Defense, specifically through the ASC Commodities Division. The contract mandates adherence to various technical and quality standards as outlined in the Defense Logistics Agency (DLA) master list, which governs the applicable revision based on solicitation and award dates. Key compliance requirements include documentation for source approval, cybersecurity standards aligned with CMMC Level 2, packaging, quality control, configuration management, and inspection protocols at the point of origin. Additionally, physical identification marking requirements apply, though item unique identification is waived by customer request. Significant regulatory compliance is required, particularly involving export-controlled technical data governed by ITAR and EAR regulations. This restricts distribution of sensitive information to contractors who have obtained specific certifications under the US/Canada Joint Certification Program and who have completed designated training on handling export-controlled data. The contract includes a 20-day delivery timeline and emphasizes strict adherence to the applicable contracts and export control clauses to ensure proper handling, security, and accountability of the product and associated technical information. The primary point of contact for inquiries is Jennifer Jacobs, reachable via email and phone, ensuring focused communication throughout the solicitation process.

General Info

Procurement of one hardener adhesive kit with strict DLA, CMMC, ITAR, and EAR compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

Contract Value

$2,000.48

NAICS

325520 - Adhesive Manufacturing

Place of Performance

NC, ITA

Set-Aside

NONE

Awardee

A.M.S. NETWORK, LLC

Award Issued Date

03/31/2026, 12:00:00 AM UTC

Documents

SPE4A6-26-T-994E.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 18

Solicitation

AwardedMar 31

Contract was awarded

Submission Closed

03/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Jennifer Jacobs

contact@example.gov

+1 (555) 000-0000

Full Description

HARDENER,ADHESIVE
HARDENER, ADHESIVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the
SPE4A6-26-T-994E
SECTION B
Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 8040-01-519-6329 Quantity: 1 KT Purchase Request: 7015912131QTY: 1 Delivery: 20 days ADO