This Subcontract opportunity from Department Of Defense was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hardware and Fastener Supply (Zippers, Buckles, MOLLE Webbing)

Closed

Federal

Submission Closed09/01/2026, 04:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332721

New

Pin Assemblies

Solicitation # pin-assemblies

Mercer Engineering Research Center is soliciting bids from qualified suppliers for the fabrication of precision ground pin assemblies. The required specifications for these components include diameters ranging from 0.155 to 3 inches and lengths between 3 and 10 inches. This opportunity is open to performance across all U.S. states. This solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties should contact Michael Lange for further details. The response deadline for this requirement is November 13, 2026.

Mercer Engineering Research Center

POSTED

DEADLINE

Precision Manufacturing of Nut Assembly, Retainer RingThis subcontract involves the precision manufacturing and assembly of five Nut Assembly Retainer Rings for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating components in strict accordance with Basic Drawing 18876 11450124 (Rev D) and Reference Drawing 18876 11450102 (Rev D), while ensuring all bare item marking adheres to RQ017 standards. Due to the nature of the project and the requirement for ITAR and EAR data access, the selected provider must hold CMMC Level 2 certification and be part of the US/Canada Joint Certification Program. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026, falling under NAICS code 332721.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Headless Pin FabricationThis subcontract involves the precision fabrication of 82 straight, headless pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturing process must strictly adhere to TDP Rev A Gen 1, reference drawing 13873 EI-011910171, and SAE AS20253 Revision B standards. The use of precision machining equipment is mandatory, while additive manufacturing is explicitly prohibited to ensure component integrity. The project requires strict adherence to cybersecurity and data protection regulations, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance will take place in Tracy, California, under NAICS code 332721. Interested parties must have submitted responses by the deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Rigid Connecting Link Manufacturing (Casting & Machining)This subcontract involves the metal casting and precision machining of 36 Rigid Connecting Links for the DLA Weapons Support Land Supply Chain. The project requires strict adherence to TDP Rev D Gen 4 and Basic Drawing NR 19207 12334415, utilizing custom casting tooling. Quality assurance must be maintained through sampling standards compliant with MIL-STD-1916 or ASQ H1331. To be eligible for this performance in New Cumberland, contractors must hold CMMC Level 2 and JCP Certification. The work falls under NAICS code 332721 and is managed under the Department of Defense. Responses for this requirement are due by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Honeywell Cotter Pins (NSN 5315-01-005-3745)This subcontract involves the supply of 140 Honeywell Aerospace US LLC cotter pins, part number 953522-23, for prime contractors supporting DLA Weapons Support ASC projects. The procurement must adhere to the DLA Master List of Technical and Quality Requirements, with sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards. The contractor is required to maintain ISO-compliant inspection systems and strictly follow the Buy American program. All 140 units are to be delivered FOB Origin to Jacksonville. This requirement is managed by the Department of Defense under NAICS code 332721.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture and Supply of Plain Plate Nuts (NSN 5310-01-632-4492)This subcontract involves the manufacture and supply of 30 plain plate nuts, specifically Boeing part number HS5771G3CR, for the DLA Weapons Support ASC. The contractor is required to use precision machining to meet strict aerospace tolerances and must adhere to ISO 9001:2015 certification and Buy American standards. Quality control will be managed through sampling per MIL-STD-1916 or ASQ H1331, with packaging requirements following ASTM D3951 and MIL-STD-129. The final 30 units are to be delivered to DLA Distribution DDSP New Cumberland.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Straight Headless Pins (NSN 5315-01-479-0776)This subcontract involves the manufacture and supply of 24 precision-machined straight, headless pins for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The pins must be fabricated to the specific dimensions and tolerances of NSN 5315-01-479-0776 utilizing CNC lathes and grinders. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332721. The contractor must ensure strict adherence to the DLA Master List of Technical and Quality Requirements and follow quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must be compliant with the Buy American Act. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Pipe-to-Tube ElbowsThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the provision of 1,081 specialized pipe-to-tube elbows matching NSN 4730010864064. The contractor is responsible for manufacturing or sourcing these components, with the potential use of additive manufacturing. All units must be marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, and Safety Data Sheets must be provided per Federal Standard No. 313. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332721. Interested parties must respond by November 27, 2026. The contract focuses on supporting prime contractors to ensure the delivery of critical hardware to the Defense Logistics Agency.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hexagon Head Cap Screw / Machine Bolt Manufacturing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Close Tolerance Screw Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Fabrication of Tensioning Tie RodsThis subcontract involves the precision machining and fabrication of 37 threaded end tensioning tie rods for the DLA Weapons Support ASC Commodities Division. The work requires the use of CNC lathes to manufacture the components according to drawing 98750 55C22150 Rev G. Performance will take place in New Cumberland, Pennsylvania, with a final delivery requirement of 37 finished and inspected units. Strict compliance with quality and regulatory standards is mandatory, including the implementation of quality systems per SAE AS9003 or ISO 9001 and zero-based sampling according to MIL-STD-1916. Additionally, the contractor must hold US/Canada Joint Certification Program credentials and maintain ITAR/EAR authorization. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-051A

This procurement, solicitation SPE4A6-27-T-051A, is for the supply of 139 machine bolts (NSN 5306-00-2264830) for the DLA Weapons Support ASC Commodities Division. The items must comply with ASME B18.2.1 standards and are designated as critical application items. A strict prohibition is placed on the use of additive manufacturing processes; any offers including parts produced via additive manufacturing will be ineligible for award. Delivery is required within 55 days, with a need ship date of January 14, 2027, and a final required delivery date of June 14, 2027. The contract is FOB Origin, with both inspection and acceptance occurring at the origin. Technical and quality requirements are governed by DLA master lists, including RQ001 for higher-level quality and RP001 for packaging. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with a specific prohibition on mercury or mercury compounds. Quality assurance requires a sampling plan per MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days

AI Contract Overview

This subcontract through the Department of Defense involves the procurement of specialized hardware and fasteners for tactical rucksacks and frames. The scope of work specifically requires the supply of military-specification number 10 self-repairing zippers, buckles, straps, and webbing compatible with MOLLE/PALS systems. The opportunity was posted on August 20, 2026, with a response deadline of September 1, 2026. The contract falls under NAICS code 332721 and is managed by the 0906 Aq Co Det B Contracting office.

General Info

DoD subcontract for tactical rucksack hardware, fasteners, and MOLLE compatible components.

Agency

Department Of Defense → 0906 Aq Co Det B Contracti

NAICS

332721 - Precision Turned Product Manufacturing

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of W90VN726QA016.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Procurement of Rucksacks

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 20

subcontract

Response DeadlineSep 1

Deadline has passed

Submission Closed

09/01/2026, 04:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → 0906 Aq Co Det B Contracti

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → 0906 Aq Co Det B Contracti

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of military-spec #10 self-repairing zippers, buckles, straps, and MOLLE/PALS-compatible webbing for integration into tactical rucksacks and frames.