Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous & Radioactive Material Packaging and Preservation

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the packaging, preservation, and labeling of hazardous and radioactive materials in strict adherence to MIL-DTL-39032 and MIL-STD-129 standards, ensuring compliance with Department of Defense specifications for safety, handling, and documentation. The work is intended to support the Maritime Supply Chain under the Department of Defense and must be performed at the designated location in Tracy, California, with the zip code 95304-5000. All activities must meet rigorous operational and regulatory requirements to manage the unique risks associated with hazardous and radioactive substances throughout their storage and transit. This is a subcontract solicitation with a response deadline of August 10, 2026, and was posted on July 29, 2026. The NAICS code 562910 identifies the nature of the work as other waste management services, indicating the focus on specialized disposal and handling procedures rather than general logistics. The solicitation does not specify a set-aside designation, and no point of contact information is provided, meaning potential respondents should rely on the official DIBBS platform link for further details and submission instructions. All proposals must demonstrate proven capability to execute these critical tasks with full regulatory compliance and precision.

General Info

Packaging, labeling hazardous and radioactive materials per MIL standards at Tracy, CA, for DoD maritime supply chain by August 10, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform packaging, preservation, and labeling of hazardous and radioactive materials in compliance with MIL-DTL-39032 and MIL-STD-129 standards.

Similar Contracts

Same NAICS industry code

Hazardous Material Abatement (Asbestos Handling)The contract pertains to the identification, containment, removal, and disposal of asbestos-containing materials that may be encountered during excavation or demolition activities in Los Angeles, California, specifically within the 90012 zip code area. It is designated as a subcontract under NAICS code 562910, which classifies it under hazardous waste collection and treatment services, and is managed by The Metropolitan Water District of Southern California. The work requires strict adherence to environmental and occupational safety standards to ensure the safe handling of asbestos, including proper sealing, transport, and disposal at approved facilities to prevent exposure and contamination. All activities must be conducted by qualified personnel with appropriate certifications and protective measures in place. The solicitation was posted on July 29, 2026, with a response deadline of August 25, 2026, at 9:00 PM Pacific Time. While no set-aside provisions or agency-specific details are outlined, the performance location is clearly specified as Los Angeles, and interested parties must submit their proposals through the provided online portal by the stated deadline. The nature of the work demands specialized expertise in hazardous material abatement, and contractors are expected to comply fully with federal, state, and local regulations governing asbestos remediation. No point of contact information is provided, suggesting that all inquiries must be directed through the official bidding platform linked in the notice.

The Metropolitan Water District of Southern California

POSTED

DEADLINE

Hazardous Materials Packaging and Compliance ServicesThe contract requires the provision of packaging, labeling, and documentation services for hazardous materials shipments, ensuring full compliance with OSHA, MIL-STD-129, and DLA preservation standards. All work must be executed to meet stringent federal regulations governing the safe handling, identification, and recordkeeping of hazardous substances, with a focus on military logistics and supply chain integrity. The services are intended to support Department of Defense operations and must align with established preservation protocols to maintain material readiness and safety during transit and storage. This is a subcontract solicitation under NAICS code 562910, posted on July 29, 2026, with a response deadline of August 10, 2026. The place of performance is designated as FPO 09566, indicating operations will primarily support overseas or mobile military units. The contracting activity falls under the Land Supply Chain organization within the Department of Defense, underscoring the critical nature of these services in sustaining mission-critical logistics. Potential bidders must demonstrate proven expertise in hazardous material handling and adherence to federal compliance frameworks to qualify.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires the labeling and packaging of hazardous material shipments in strict compliance with OSHA’s Hazard Communication Standard and MIL-STD-129 for proper shipment marking. This includes the preparation and submission of Safety Data Sheets and hazard warning labels to ensure all regulatory requirements for handling, transporting, and identifying dangerous goods are fully met. The work must be performed to support military logistics operations and align with federal defense standards for hazardous material management. The contract is listed as a subcontract under NAICS code 562910, with a response deadline of August 10, 2026, and was posted on July 29, 2026. The place of performance is specifically designated as New Cumberland, Pennsylvania, 17070-5002, and the contracting activity falls under the Department of Defense’s Active Devices Division. All work must be completed in accordance with the specified standards to ensure regulatory compliance and mission readiness.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Materials Packaging and Handling ServicesThe contract requires comprehensive packaging, labeling, and preparation services for hazardous and radioactive materials to ensure safe transportation in full compliance with OSHA, MIL-STD-129, DFARS, and all applicable federal regulations. The work must be executed to meet stringent military and environmental safety standards, with a focus on securing materials that pose significant risk during transit. Performance is designated to take place at the New Cumberland facility with a zip code of 17070-5002, and the contract is structured as a subcontract under the NAICS code 562910, indicating it falls within the waste management and remediation services sector. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with the awarding agency identified as the Department of Defense through its DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazardous Materials Handling and ReportingThe contract requires the identification, documentation, and reporting of any items containing radioactive materials that exceed Department of Defense thresholds before delivery. This obligation applies to all phases of handling and must be conducted with precision to ensure regulatory compliance and safety. The contractor is responsible for implementing procedures to detect, classify, and communicate the presence of radioactive substances to the appropriate authorities prior to shipment or transfer, ensuring no non-compliant materials enter the supply chain. This subcontract, issued under the ASC Commodities Division of the Department of Defense, falls under NAICS code 562910, indicating it pertains to remediation and waste management services. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026. Performance location details are unspecified, but the work is tied to DoD logistics and supply operations. Full adherence to federal guidelines for radioactive material handling is mandatory, and failure to meet these requirements may result in rejection of delivered goods or contract violation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires strict adherence to protocols for the safe packaging, labeling, and documentation of hazardous materials during shipment, ensuring full compliance with Safety Data Sheet (SDS) requirements and standardized hazard warning labels. All activities must align with federal regulations governing the transport of dangerous goods, emphasizing accurate identification, clear labeling, and proper recordkeeping to mitigate risks during handling and transit. The work is scoped under NAICS code 562910 and is structured as a subcontract, with a focus on maintaining regulatory integrity and operational safety throughout the supply chain. This procurement is issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a response deadline of August 10, 2026, and a posting date of July 29, 2026. While specific performance locations and point of contact details are not provided, the contract implicitly demands experienced contractors capable of managing hazardous materials in alignment with Department of Defense standards. Compliance with SDS documentation and hazard communication protocols is mandatory, and failure to meet these requirements may result in contract non-compliance or rejection. Interested parties must submit responses prior to the deadline via the official DIBBS portal linked in the posting.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Radioactive Materials Notification & HandlingThe contract titled Radioactive Materials Notification & Handling is a subcontract issued under a Total Small Business Set-Aside, exclusively for small businesses as defined by the SBA, with a NAICS code of 562910, indicating services related to waste treatment and disposal. It requires the successful bidder to identify, label, and notify appropriate parties regarding items containing radioactive materials that exceed established regulatory thresholds. The work is specifically performance-based and must be executed at the designated location in Columbus, Ohio, with a zip code of 43213. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with the issuing agency being the Active Devices Division within the Department of Defense. Contractors must ensure full compliance with applicable federal regulations concerning the handling and notification of radioactive substances, and all operations must align with the safety and procedural standards mandated by the agency for the secure management of such materials.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

IFB - Remediation and Removal of Asbestos Contaminated Debris and Soil

Solicitation # BD-27-1271-CPO00-CPO-131854

The Town of Franklin is seeking a qualified construction firm to perform the remediation and removal of asbestos-contaminated debris and soil within its jurisdiction, in compliance with Massachusetts General Laws Chapter 149. The project is solicited under IFB BD-27-1271-CPO00-CPO-131854, with a posted date of July 29, 2026, and a mandatory response deadline of August 20, 2026, at 3:00 PM. The work is classified under NAICS Code 562910, which pertains to Remediation Services, and is being procured by the Town’s Purchasing Department under the state of Massachusetts. All work must be performed at the designated site on East Central Street in Franklin, Massachusetts, with a ZIP code of 02038. Pamela Vickery serves as the primary point of contact for inquiries, holding the title of Purchaser. The solicitation is open to qualified bidders through the Commonwealth’s online procurement portal, and all proposals must adhere to state regulations governing public contracting and environmental safety standards for asbestos handling and disposal.

CPO001 - Town of Franklin Purchasing Department

POSTED

DEADLINE

Hazardous Materials Abatement (Asbestos)The contract pertains to the identification, containment, and abatement of asbestos-containing materials that may be encountered during excavation and construction activities in Riverside, California, with a place of performance coded as 92501. It is issued as a subcontract under the NAICS code 562910, which classifies it within hazardous waste remediation services. The solicitation was posted on July 29, 2026, and responses are due by August 19, 2026, at 9:00 PM. The contracting entity is the County of Riverside, California, and the work must be performed in strict compliance with federal and state regulations governing asbestos handling, worker safety, and environmental protection. All activities must ensure safe removal, disposal, and documentation of asbestos materials, with protocols designed to prevent airborne contamination and protect public health during site operations.

County of Riverside

POSTED

DEADLINE

Emergency Response & Spill RemediationThe contract requires the provision of 24/7 emergency response services for environmental spills and contamination events, fully compliant with 801 CMR 21 regulations. This includes immediate deployment of trained personnel and equipment to contain, mitigate, and remediate incidents promptly, ensuring minimal environmental impact and regulatory adherence. The scope demands rapid response capabilities around the clock with the ability to operate effectively in diverse weather and site conditions across the designated area. The work is to be performed primarily at Main Street in Ware, Massachusetts, with a zip code of 01082, under the oversight of the TM001 - Town Manager agency within Massachusetts. The solicitation is structured as a subcontract, with the response deadline set for August 26, 2026, at 7:00 PM. The NAICS code 562910 applies, indicating the services fall under Environmental Remediation Services. The contract does not specify any set-aside preferences or point of contact details, and bidders must ensure full alignment with state environmental protocols and performance expectations tied to emergency response timelines.

TM001 - Town Manager

POSTED

DEADLINE

PRF77 designated DCAMM Environmental Brownfields Clean Up - Monroe St., Ware MA

Solicitation # BD-26-1724-TM001-TM001-131351

The Town of Ware is soliciting proposals from firms prequalified under the DCAMM Environmental Engineering, Diagnostics and Testing contract (PRF77) to provide environmental services for the Brownfields Cleanup Project at the American Gas Site on Monroe Street in Ware, Massachusetts. This project is funded by the U.S. Environmental Protection Agency and requires the expertise of qualified environmental professionals to carry out cleanup activities in accordance with regulatory standards. Only firms already vetted and approved under the specified DCAMM contract are eligible to respond, ensuring a streamlined selection process based on established qualifications and experience. Proposals must be submitted by the deadline of August 26, 2026, at 7:00 PM, with the solicitation issued on July 29, 2026, under reference number BD-26-1724-TM001-TM001-131351. All work is to be performed at the site located on Monroe Street in Ware, ZIP 01082, and inquiries should be directed to Paralee Smith, the designated primary point of contact, at 413-967-9648. The procurement is managed through the Town Manager’s office under the state of Massachusetts and is accessible via the official CommBuys portal for detailed information and submission.

TM001 - Town Manager

POSTED

DEADLINE

Lead-Based Paint Abatement and Safety ComplianceThe contract requires comprehensive inspection, containment, and abatement of lead-based paint that may be encountered during surface preparation activities, with strict adherence to all applicable federal and state safety regulations. All work must be conducted in a manner that ensures the health and safety of workers and the surrounding environment, following established protocols for identification, isolation, and safe removal of lead-based paint hazards. The subcontractor is responsible for implementing proper containment measures to prevent the spread of lead dust and debris, as well as for conducting post-abatement clearance procedures in compliance with regulatory standards. Performance of this work is specifically tied to a location in New Bedford, Massachusetts, with a zip code of 02740, and must be completed in alignment with the NAICS code 562910, which pertains to remediation services. The solicitation was posted on July 29, 2026, and responses are due by August 27, 2026, at 7:00 p.m. This is a subcontract under the Office of the Procurement Agent, Massachusetts, and while no set-aside provisions are specified, the contractor must be prepared to meet all safety and regulatory requirements without exception. All activities must prioritize environmental protection and public health throughout the entire process.

P0001 - Office of the Procurement Agent

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Invalid Knowledge Base ReferenceThe contract is a subcontract flagged for a Service-Disabled Veteran-Owned Small Business Set-Aside, indicating eligibility and preference for businesses owned by service-disabled veterans. It was posted on July 29, 2026, with a response deadline of August 10, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. The place of performance is specified as Corpus Christi, Texas, with a zip code of 78419-5255, though no exact address or point of contact information is provided. The North American Industry Classification System code is listed as NA, and the agency organization details are incomplete, preventing full contract decomposition or analysis. The solicitation number is absent, and the contract can be accessed via a DIBBS link, but no prime contract data or vendor details are available for review.

POSTED

DEADLINE

Piston Ring Supply and ComplianceThe contract entails the supply of a single military-specification piston ring identified by NSN 4310017064138 and part number 18-20419-12R1, manufactured and delivered in full compliance with U.S. Department of Defense standards. Delivery requirements include strict adherence to MIL-STD-129 for item labeling and MIL-STD-2073-1E for packaging, ensuring the component is properly marked, protected, and documented for military logistics. The piston ring must also meet hazardous material handling protocols and be processed through the Defense Logistics Agency fulfillment system to guarantee seamless integration into the military supply chain. The solicitation is classified as a subcontract under NAICS code 333912, issued by the Maritime Supply Chain division of the Department of Defense, with performance required at FPO and a zip code of 09591. Bidders must submit their proposals by the deadline of August 10, 2026, with the opportunity originally posted on July 29, 2026. All suppliers are expected to fulfill documentation, packaging, and compliance specifications without exception, as nonconformity will result in rejection regardless of product quality. Access to the official solicitation details is available through the DIBBS platform using the provided link.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Supply of Split Ring (NSN 4320008950467)The contract seeks the procurement and delivery of two Split Rings identified by NSN 4320-00-895-0467, strictly adhering to the standards outlined in DLA RA001. Delivery must be made FOB origin with zero quantity variance, ensuring exact compliance with the required quantity and specifications. All items must meet military packaging and marking requirements, as well as applicable regulatory standards for defense equipment to guarantee readiness and interoperability within defense supply chains. The solicitation is classified as a subcontract under NAICS code 332439 and is administered by the Maritime Supply Chain within the Department of Defense. Responses are due by August 10, 2026, with the contract posted on July 29, 2026. Performance will be directed to Tracy, California, with a ZIP code of 95304-5000. The contract is accessible via the DIBBS platform, and full compliance with technical, logistical, and regulatory specifications is mandatory for award consideration.

Other Metal Container Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for contractors handling sensitive government data. All systems and processes must be configured to meet the full suite of controls outlined in the NIST publication, covering areas such as access control, audit, configuration management, and incident response. In addition to maintaining these protections, the contractor is obligated to report any cyber incidents involving covered defense information within 72 hours of discovery, with full cooperation in investigations and remediation efforts. This is a subcontract under the Department of Defense’s Maritime Supply Chain initiative, with performance expected to take place at an FPO address identified by the zip code 96675. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services. The solicitation was posted on July 29, 2026, and responses must be submitted by August 10, 2026. While no specific set-aside designation is provided, the contract is managed through the DLA DIBBS platform, and strict adherence to the timeline and cybersecurity requirements is mandatory for award consideration.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling SupportThe contract seeks specialized support for hazard communication related to electrical components containing hazardous materials, requiring the preparation of compliant hazard warning labels and Material Safety Data Sheets (MSDS) in accordance with regulatory standards. The work is intended to ensure that all hazardous substances within these components are properly identified, documented, and communicated to downstream users and handlers, mitigating safety risks and maintaining regulatory compliance across the supply chain. The contractor must possess the technical expertise to interpret chemical hazards and translate them into accurate, standardized safety documentation. This subcontract is issued under NAICS code 541690 and is managed by the Department of Defense through the Maritime Supply Chain organization. The place of performance is designated as FPO with a ZIP code of 96675, indicating operations may involve military or overseas logistics environments. Proposals must be submitted by August 10, 2026, following the solicitation posted on July 29, 2026. While no set-aside type is specified, the solicitation is accessible via the DIBBS platform, emphasizing the need for timely and precise adherence to federal procurement protocols for defense-related hazardous materials compliance.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Magnetic Contactors / Motor StartersThe contract requires the manufacture, testing, packaging, and delivery of magnetic contactors designated by NSN 6110014119297, commonly referred to as motor starters, strictly in accordance with military specifications to ensure reliability and performance under demanding operational conditions. The work must meet all applicable defense standards for quality, durability, and safety, with full compliance expected throughout the production and quality assurance processes. These components are critical for military equipment functionality and must be produced with precision to ensure seamless integration into existing systems. The solicitation is issued as a subcontract under the Department of Defense through the Maritime Supply Chain, with a response deadline of August 10, 2026, and the place of performance designated as FPO with ZIP code 96675. The NAICS code 335313 identifies the industry as Electric Lighting Equipment, Electrical Equipment, and Appliance, and Motor and Generator Manufacturing, aligning with the technical scope of the required components. All deliverables must be fully packaged and labeled per military logistics requirements for secure and efficient distribution to designated operational units.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Centrifugal Pump Impeller SupplyA single centrifugal pump impeller with a diameter of 8.1875 inches is being procured under a small business set-aside subcontract, exclusively available to small businesses as defined by the SBA under FAR 19.5. The item must comply strictly with military standards for packaging, marking, and hazardous materials handling to ensure safe and standardized handling throughout the defense supply chain. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, with performance required at the specified location in New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code assigned is 333996, indicating the procurement falls under other miscellaneous manufacturing. The opportunity was posted on July 29, 2026, and responses are due by August 10, 2026, with all submissions expected to meet the technical, regulatory, and procedural requirements outlined for defense contracts.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Technical Data and Export Control ManagementThe contract pertains to the management of technical data subject to International Traffic in Arms Regulations and Export Administration Regulations, requiring strict control over access, handling, and dissemination to ensure compliance with U.S. export control requirements. It mandates the implementation of processes for authorizing foreign national access to controlled technical data, including screening, documentation, and ongoing monitoring to prevent unauthorized disclosure. All activities must adhere to federal export control standards and maintain the integrity of sensitive information throughout its lifecycle. This is a total small business set-aside subcontract under NAICS code 541618, issued by the Department of Defense through the Maritime Supply Chain organization. The opportunity was posted on July 29, 2026, with responses due by August 10, 2026. Performance is expected to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contracting mechanism is designed to prioritize small business participation, and the work involves specialized expertise in export compliance, technical data security, and regulatory adherence within the defense supply chain ecosystem.

Other Management Consulting Services

POSTED

DEADLINE

CMMC Level 2 Compliance and Cybersecurity SupportThe contract seeks third-party support for achieving and maintaining CMMC Level 2 compliance to safeguard controlled unclassified information within the maritime supply chain. The effort focuses on assessing cybersecurity posture and providing implementation guidance to meet the required safeguards outlined in the CMMC framework, specifically tailored for handling CUI across subcontracted operations. This is a small business set-aside under the SBA program, exclusively available to total small businesses, with the North American Industry Classification System code 541512 designating it as computer systems design and related services. Performance is centered in New Cumberland, Pennsylvania, with the Department of Defense, under the Maritime Supply Chain office, serving as the contracting authority. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. The subcontract will engage qualified providers to conduct comprehensive assessments, remediate gaps, and ensure ongoing compliance with CMMC Level 2 requirements throughout the supply chain, reinforcing the defense industrial base’s cyber resiliency. All work must align with federal standards for protecting sensitive information and supporting the broader objectives of the DoD’s cybersecurity maturity initiatives.

Computer Systems Design Services

POSTED

DEADLINE

Domestic Transportation and FOB Origin LogisticsThe contract requires the domestic transportation of 26 marine doors from the manufacturer to the Defense Logistics Agency facility in New Cumberland, Pennsylvania, under FOB Origin terms, meaning the buyer assumes all responsibility and costs once the goods leave the seller’s location. The contractor must ensure full tracking of the shipment and provide complete delivery documentation upon arrival. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively for small businesses as defined by the SBA, with the NAICS code 484220 indicating surface transportation of freight. The opportunity was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Maritime Supply Chain organization under the Department of Defense. Delivery must be completed at the designated zip code 17070-5002, and the contractor is expected to meet all logistical requirements without additional support from the government beyond the specified terms.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Military Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires comprehensive packaging and labeling of marine doors in strict adherence to MIL-STD-129 and MIL-STD-2073-1E standards, ensuring military-grade documentation, barcoding, and container marking for defense logistics. Additionally, compliance with OSHA hazard communication regulations is mandatory, including the accurate generation and inclusion of Safety Data Sheets (SDS) for any hazardous materials involved in the manufacturing or packaging process. All work must be executed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 561910 indicating the scope involves support activities for material handling and packaging services. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and responses are required by August 10, 2026, following a posting date of July 29, 2026. This is a subcontract opportunity issued under the Department of Defense through the Maritime Supply Chain organization, with all technical and regulatory requirements centered on defense logistics compliance and hazardous materials safety.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacture of Metal Marine DoorsThe contract seeks the fabrication of 26 metal marine doors, each with a clear opening of 26 inches by 66 inches, specified under NSN 2040-01-253-4544, and must fully comply with military standards for durability and performance in harsh marine environments. The work will be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the doors must be manufactured to meet exacting defense-grade requirements for corrosion resistance, structural integrity, and operational reliability under saltwater exposure and extreme conditions. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 332312, ensuring eligibility is restricted to qualifying small businesses. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is administered by the Maritime Supply Chain organization within the Department of Defense. While no point of contact or detailed technical specifications are provided in the data, bidders are expected to fully understand and adhere to the referenced NSN and associated military specifications for marine door systems, and submissions must align with the set-aside criteria to be considered for award.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE