Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of The Treasury was posted on June 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Material Abatement (ACM and PCBs)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was prompted by a sprinkler system failure and requires the removal and remediation of mold throughout the building, including the cleaning or replacement of theater seating cushions and the removal of affected drywall, gypsum wallboard, and acoustical ceiling tiles. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA and OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. The contractor is required to provide a Certified Industrial Hygienist to verify materials and conduct final clearance walkthroughs, as well as a detailed mold remediation plan. This is a single lump sum contract awarded based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Bidders must be licensed contractors in the state of Indiana and provide certification of compliance with Davis Bacon Act wage rates. Required submission documents include a detailed cost breakdown, a timeline for substantial completion, a W9, a vendor questionnaire, and proof of insurance naming Adams and Associates, Inc. as an additional insured. The contractor must start work within 14 days of the Notice to Proceed, and final payment is subject to Net 30 terms upon the submission of certified payroll records, a completed SF 1413, and a release of liens.
Atterbury Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 11 days
NAICS: 562910
New
SLED
MPE Three Classroom Mold Abatement - Rooms 22, 23, 24
Solicitation # 01 (2026-2027)
The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.
Montebello Unified School District

POSTED

about 13 hours ago

DEADLINE

in 5 days

AI Contract Overview

Show more

This contract involves the abatement and removal of asbestos-containing materials (ACM) and polychlorinated biphenyls (PCBs) in conjunction with an elevator modernization project. The scope includes safe containment and proper disposal of these hazardous materials to ensure compliance with environmental and safety regulations. The work is designated as a subcontract and is set aside exclusively for total small business participation under the Small Business Administration (SBA) guidelines. Issued by the Department of the Treasury’s Office of the Chief Procurement Officer, the solicitation was posted in June 2026, with responses due by late July 2026. The project will be performed in Washington, DC, and falls under the NAICS code 562910, which covers environmental remediation services. This contract emphasizes strict adherence to safety protocols due to the hazardous nature of the materials involved, aiming to support the modernization process without compromising environmental or public health standards.

General Info

Subcontract for asbestos and PCB removal during elevator modernization, exclusive to small businesses.

NAICS

562910 - Remediation Services

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Documents

This scope was carved out of 2031ZA26Q00100.

The full solicitation package (18 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Elevator Modernization

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Plan for abatement of asbestos-containing materials and removal of PCBs during elevator modernization, including containment and disposal.

More opportunities from Department Of The Treasury → Office Of The Chief Procurement Officer

Same awarding agency

NAICS: 541990
New
Federal
Maintenance Service for Portable Fire Extinguishers - BPA
Solicitation # 2031ZA27Q00004
Solicitation 2031ZA27Q00004 is a request for quotations for a single-award, firm-fixed-price Blanket Purchase Agreement (BPA) to provide portable fire extinguisher maintenance services for the Bureau of Engraving and Printing (BEP) at its Washington, D.C. facility. This acquisition is a 100% small business set-aside under NAICS 541990. The contract covers a five-year period of performance from December 1, 2026, through November 30, 2031. The scope of work involves the inspection, maintenance, testing, repair, and replacement of approximately 1,220 portable fire extinguishers in compliance with NFPA-10 and OSHA 29 CFR Part 1910 standards. The BPA structure includes annual calls for inspections and as-needed calls for services such as 6-year teardowns, 5-year and 12-year hydrostatic testing, and recharges. Award will be granted to the offeror with the lowest priced, technically acceptable offer and no adverse past performance. Proposals must be submitted in two separate volumes, with the technical volume limited to five pages. Evaluation will focus on the completeness of the proposed approach and the associated risk. Contractors are required to submit a Quality Control Plan and ensure personnel meet minimum qualifications, which may be satisfied through ICC/NAFED certifications of subcontractors.
All Other Professional, Scientific, and Technical Services

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 236220
Federal
Cooling Tower, Roofing, and Structural Construction
Solicitation # 2031ZA26R00027
Solicitation 2031ZA26R00027 is a design-build project issued by the Bureau of Engraving and Printing for the assessment, demolition, and replacement of cooling towers and associated infrastructure at the District Currency Facility Main Building in Washington, DC. The scope of work includes replacing two Evapco cooling towers and one BAC tower, along with the associated structural steel platforms, roofing, mechanical, electrical, and SCADA control systems. The project requires lead-based paint abatement and adherence to IPC, ASHRAE, ASME, and National Electrical Code standards. The estimated contract value ranges between 1 million and 5 million dollars, with a performance period not to exceed 730 calendar days from the notice to proceed. This is a total small business set-aside under NAICS 236220. The government will utilize a best value trade-off methodology for award, where non-price factors—specifically corporate experience and past performance—are weighted more heavily than the technical approach, key personnel, project plan, and price. Proposals must be submitted in two separate volumes, with the technical volume limited to 15 pages. Per Amendment 0001, the response deadline has been extended to November 9, 2026. Awarded contractors must provide a performance bond for 10 percent of the contract amount and comply with Davis-Bacon Wage Determinations.
Commercial and Institutional Building Construction

POSTED

21 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS