Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Material Compliance & Labeling Services

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of comprehensive hazardous material compliance services aligned with OSHA HAZCOM standards, including the preparation of safety data sheets, design of hazard labels, and verification of regulatory adherence for the shipment of dangerous goods under federal and military specifications. All deliverables must meet the strict requirements set forth by Department of Defense protocols to ensure the safe handling, transport, and documentation of hazardous materials. Services are to be performed for the DDSP NEW CUMBERLAND FACILITY, with the place of performance located at 17070-5002 in New Cumberland. The contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services, and is open for response through July 28, 2026. Compliance with all applicable regulations must be rigorously maintained throughout the project lifecycle to support the defense supply chain’s safety and regulatory obligations.

General Info

Provide hazardous material compliance services per OSHA and DoD protocols at New Cumberland facility until July 28, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide OSHA HAZCOM-compliant SDS preparation, hazard label design, and compliance verification for shipment of hazardous materials under federal and military standards.

Similar Contracts

Same NAICS industry code

Technical Advisory Services for the Allens Creek Reservoir ProjectThe Brazos River Authority is seeking qualified firms to provide Technical Advisor services for the Allens Creek Reservoir Project, with a focus on regulatory permitting at both federal and state levels, water resources engineering analyses, and design of project-specific components. The selected firm will work under the direction of the BRA to safeguard the authority’s and its customers’ interests across a range of critical project tasks, offering specialized expertise to complement the BRA’s internal project team. The scope of work is flexible and will be activated at the BRA’s discretion as needed throughout the project lifecycle, ensuring targeted support where technical depth is most crucial. Proposals must be submitted by August 19, 2026, at 4:00 PM CT, under solicitation number 26-1393, which was posted on July 23, 2026. Interested firms should direct inquiries to Bryan Gray or Clarissa Cabrera at the BRA’s Waco, Texas office, with additional support available from Meagan Nix. The procurement is open to all eligible entities without set-aside restrictions, and the contract will be managed under the authority’s purchasing protocols. All correspondence and submissions must adhere to the requirements outlined in the solicitation, with performance expected to align with the BRA’s objectives for the Allens Creek Reservoir Project in Texas.

BRAZOS RIVER AUTHORITY

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Handling and SDS Compliance SupportThe contract titled Hazardous Materials Handling and SDS Compliance Support involves the preparation and validation of Safety Data Sheets for hazardous materials to ensure full compliance with OSHA standards and applicable city regulations. The work requires precise documentation practices that align with federal and local safety requirements, focusing on accuracy, clarity, and regulatory adherence to protect workers and the public. The subcontract is issued by the City of Dallas under NAICS code 541620, which corresponds to environmental consulting services, indicating a professional services engagement focused on regulatory compliance support. Proposals must be submitted by the deadline of August 21, 2026, at 6:00 PM, following the solicitation posted on July 23, 2026. The opportunity is structured as a subcontract and does not specify any set-aside status, meaning it is open to all eligible contractors without designated preferences. The place of performance and point of contact details are not provided, suggesting that work may be performed remotely or at locations determined by the contractor, as long as deliverables meet the city’s compliance standards. All parties must ensure that SDS documentation is current, properly formatted, and consistent with the latest regulatory guidance to pass validation.

POSTED

about 18 hours ago

DEADLINE

Wildlife Monitoring and Reporting ServicesThe contract entails conducting routine field surveys to monitor bird activity and track population trends in support of aviation safety operations at DFW International Airport. Contractors are required to systematically document wildlife observations and generate detailed monthly reports that include actionable mitigation recommendations to ensure compliance with Federal Aviation Administration guidelines. The work is critical to minimizing bird strike risks and maintaining safe flight operations around the airport environment. This subcontract opportunity, categorized under NAICS code 541620 for scientific and technical consulting services, is posted by DFW International Airport in Texas with a response deadline of August 6, 2026. The solicitation does not specify any set-aside provisions or targeted small business categories. All performance is expected to occur at or near the airport grounds, and while direct point of contact details are not provided, proposals must be submitted through the designated online portal by the stated deadline.

Dfw International Airport

POSTED

about 19 hours ago

DEADLINE

NPDES COMPLIANCE AND PROGRAM SERVICESThe City of Stockton is seeking a qualified professional consultant or team to provide comprehensive NPDES compliance and program assistance services for the Stockton Wastewater Recovery Center. The contractor will be responsible for delivering technical support to ensure ongoing adherence to the NPDES permit requirements, addressing regulatory obligations, and offering guidance on operational improvements and reporting responsibilities. This engagement requires deep expertise in wastewater management, environmental regulations, and permitting processes, with a focus on maintaining compliance and mitigating potential violations. Proposals must be submitted by August 20, 2026, in response to solicitation number PUR 27-001, which was posted on July 23, 2026. The work will be performed entirely within California, specifically at the City’s wastewater facility. The primary point of contact for inquiries is Rajvir Sahota, reachable via phone or email. This procurement is open to all qualified entities without specific set-aside restrictions, and the City intends to select a partner with demonstrated experience in NPDES compliance to ensure the continued safe, lawful, and efficient operation of its wastewater recovery program.

City of Stockton

POSTED

about 20 hours ago

DEADLINE

Environmental Compliance and Permitting SupportThe contract entails providing comprehensive environmental compliance and permitting support for projects under the California Department of Transportation, with primary responsibilities including conducting California Environmental Quality Act assessments, performing wetland delineations, and carrying out cultural resource surveys. These tasks are essential to ensure regulatory adherence and facilitate the approval process for transportation initiatives across the state. The scope of work requires technical expertise in environmental science and state-specific permitting frameworks to support Caltrans in meeting legal and ecological obligations during project development. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 24, 2026, and is classified under NAICS code 541620 for environmental consulting services. The place of performance is statewide within California, indicating that work may be required across multiple locations depending on project needs. While no specific set-aside provisions are identified, interested parties must submit proposals through the CalEProcure portal before the specified deadline to be considered for award. The contract demands a thorough understanding of California’s environmental regulations and an ability to deliver precise, defensible documentation to support permitting outcomes.

California Department of Transportation

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Weed and Pest Control ServicesThe contract titled Weed and Pest Control Services outlines a subcontract for the application of herbicides, insecticides, and integrated pest management practices to control invasive weeds, insects, and rodents across grounds and easements managed by the Trinity River Authority of Texas. The work falls under NAICS Code 541620, indicating it is classified as environmental consulting services, and is intended to support ecological maintenance and public safety through targeted pest and vegetation control. The solicitation was posted on July 23, 2026, with a response deadline of August 12, 2026, allowing potential vendors a limited window to submit proposals. Performance will occur across various locations within Texas under the authority’s jurisdiction, though specific cities or addresses are not listed. The contract is open to qualified subcontractors who can demonstrate expertise in environmentally responsible pest management and compliance with applicable regulations.

Trinity River Authority of Texas

POSTED

about 22 hours ago

DEADLINE

ADA Compliance and Accessibility ConsultingThe contract requires full compliance with the Americans with Disabilities Act standards for all aspects of design and construction, ensuring that facilities are accessible to individuals with disabilities. This includes specific provisions for door widths, restroom configurations, informational and directional signage, and continuous pathways of travel throughout the site. The work must be executed with precision to meet or exceed federal accessibility requirements, with close attention to detail in every phase from planning through final build. The solicitation is classified as a subcontract under NAICS code 541620 for architectural and engineering services and is administered by the State of Utah. Proposals must be submitted by August 5, 2026, and the opportunity was posted on July 23, 2026. While no specific location for performance has been detailed, all work is expected to be carried out in alignment with Utah’s obligations under federal accessibility regulations, with no set-aside provisions specified. Bidders must demonstrate proven experience in ADA compliance consulting and a thorough understanding of the technical requirements for accessible design.

POSTED

about 22 hours ago

DEADLINE

Sustainable and Environmentally Compliant ManufacturingThis contract requires all manufacturing processes to adhere strictly to FAR 52.223-23, mandating full compliance with environmental regulations that prohibit the use of Class I ozone-depleting chemicals. Suppliers must source materials that meet eco-compliant standards and implement green manufacturing practices throughout production to ensure zero contamination from regulated substances. The emphasis is on sustainable sourcing, waste reduction, and environmentally responsible operations to align with federal mandates aimed at protecting the ozone layer and reducing ecological impact. The solicitation is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively available to small businesses certified by the SBA. It falls under NAICS code 541620, which pertains to environmental consulting services, indicating the need for technical expertise in environmental compliance and green manufacturing systems. The contract was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. All work must be performed in compliance with the specified environmental standards, and no deviations from the prohibition of Class I ozone-depleting substances will be permitted under any circumstances.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Handling and SDS ComplianceThe contract pertains to the classification, handling, and regulatory compliance of hazardous materials contained within propeller shaft components, requiring strict adherence to federal and industry safety standards. A primary responsibility includes the preparation and timely submission of accurate Safety Data Sheets that detail the chemical composition, hazards, handling procedures, emergency measures, and disposal methods for all regulated substances involved. Compliance with applicable environmental, transportation, and occupational safety regulations is mandatory throughout the lifecycle of these components, from procurement through manufacturing and delivery. Work under this subcontract must be executed in alignment with NAICS code 541620, indicating it is a scientific and technical services contract, likely supporting defense system supply chains. The solicitation is issued by the Department of Defense’s Strategic Acquisition Program Directorate, with a submission deadline of July 28, 2026, and a posting date of July 23, 2026. The place of performance and specific office details are not provided, but the nature of the work implies coordination across multiple facility locations involved in the production or integration of naval propulsion components. Full regulatory documentation and traceability of hazardous material handling are expected to ensure seamless integration within military systems and compliance with DoD supply chain security protocols.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract titled Hazardous Materials Compliance & Labeling Services requires the identification, classification, and accurate labeling of hazardous materials used in manufacturing or packaging processes. It includes the preparation of Safety Data Sheets in full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard, while also addressing applicable exemptions under OSHA HCS. The work involves ensuring all hazardous substances are properly documented, marked, and communicated to personnel in alignment with federal safety regulations. This subcontract, issued under NAICS code 541620 by the Department of Defense’s Strategic Acquisition Program Directorate, is focused on supporting defense-related operations with robust hazardous materials management. The solicitation was posted on July 23, 2026, with a response deadline of July 28, 2026. The place of performance and specific location details are not specified, and no set-aside provisions or point of contact information are provided. Contractors must deliver comprehensive compliance services that uphold the integrity of hazardous material handling within defense manufacturing and packaging environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Environmental Compliance MonitoringThe contract seeks a subcontractor to provide environmental compliance monitoring services focused on stormwater management, erosion control inspections, and associated reporting during active site work. The scope requires ongoing observation and documentation to ensure adherence to regulatory standards for water quality and soil stabilization throughout construction or development activities. All services must align with federal environmental requirements and result in timely, accurate compliance reports that demonstrate adherence to applicable rules and permits. The solicitation is issued under the NAICS code 541620 for environmental consulting services and is classified as a subcontract through the Department of Defense’s Strategic Acquisition Program Directorate. The opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026. While specific performance locations and point of contact details are not provided, the work will occur at active DoD project sites requiring environmental oversight, and bidders must be prepared to operate in compliance with federal, state, and local environmental regulations. Participation requires proven experience in site-based environmental monitoring and reporting within government-contracted projects.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive regulatory compliance support for hazardous materials, with a primary focus on the preparation, management, and maintenance of Safety Data Sheets aligned with OSHA’s Hazard Communication Standard and DFARS requirements. This effort ensures accurate, up-to-date documentation for all hazardous substances used or handled under the program, facilitating workplace safety, regulatory adherence, and supply chain transparency. The work must be executed in strict accordance with federal standards to enable proper hazard identification, exposure control, and emergency response procedures. This subcontract, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is categorized under NAICS code 541620 for environmental and other technical consulting services. It has a narrow five-day response window, with submissions due by July 28, 2026, and was posted on July 23, 2026. While specific performance location and point of contact details are not provided, the scope is centered on delivering compliance documentation and support services critical to defense operations. The contractor must demonstrate expertise in hazardous materials regulatory frameworks, particularly in interpreting and applying OSHA and DFARS mandates to ensure full compliance across all applicable contexts.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NIST SP 800-171 Compliance & Cybersecurity SupportThe contract requires comprehensive cybersecurity support to ensure the proper handling of Covered Defense Information in alignment with NIST SP 800-171 requirements, including the development of a System Security Plan and implementation of necessary controls to meet federal defense standards. Performance is tied to DFARS 252.204-7008, mandating that the contractor conduct a self-assessment of cybersecurity practices and submit the resulting assessment report to the DoD, demonstrating full compliance with the specified security controls. This effort is critical for safeguarding sensitive information processed or stored within the contractor’s systems. The work is classified as a subcontract under NAICS code 541512, indicating it involves computer systems design services. Performance is exclusively tied to the New Cumberland facility with a zip code of 17070-5002, and the contract is managed by the Department of Defense through the DDSP New Cumberland Facility. The solicitation was posted on July 23, 2026, with a firm deadline for responses on July 28, 2026, leaving a narrow window for qualified vendors to submit proposals. All activities must be conducted with the explicit goal of achieving, maintaining, and documenting compliance with DoD cybersecurity mandates for the protection of defense information.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

Transportation & Delivery of Regulated Goods (Hazardous/Radioactive)The contract requires the secure and compliant transportation of valve assemblies classified as hazardous and radioactive materials, adhering strictly to all Department of Defense shipping regulations and federal hazardous materials handling standards. Execution must ensure full adherence to safety protocols throughout transit to prevent contamination, exposure, or regulatory violations, with particular emphasis on proper packaging, labeling, documentation, and personnel training specific to radioactive substances. The delivery destination is the New Cumberland location with ZIP code 17070-5002, and all logistics must align with the Defense Logistics Agency’s electronic documentation system, WAWF, to ensure real-time tracking and compliance verification. This is a subcontract under NAICS code 484220 for hazardous materials trucking, issued by the Department of Defense’s New Cumberland facility. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, leaving a narrow window for qualified vendors to submit proposals. While specific point of contact details and set-aside status are not provided, the contractor must be prepared to demonstrate proven experience in transporting regulated nuclear or hazardous goods, possess current DOT and NRC certifications as applicable, and maintain an auditable trail of compliance through digital documentation. The work must be completed without disruption to military operations or regulatory audits, underscoring the critical nature of precision, timeliness, and regulatory integrity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Military-Compliant Packaging & Crating ServicesThe contract requires full compliance with MIL-STD-129 and MIL-STD-2073-1E standards for the packaging, marking, preservation, and documentation of valve assemblies destined for military shipment. All work must adhere strictly to these defense specifications to ensure proper handling, identification, and protection of sensitive defense hardware throughout the supply chain. The packaging and crating services must be executed to guarantee the integrity of the valve assemblies during transport, storage, and eventual deployment, with documentation accurately reflecting all required labeling, barcoding, and transactional data as mandated by the military standards. This subcontract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the facility located in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with a North American Industry Classification System code of 811411 indicating specialized repair and maintenance services. The contract is open to qualified subcontractors capable of meeting rigorous defense-grade packaging and preservation requirements and must be delivered in accordance with the designated place of performance and under the exacting standards expected by the U.S. military logistics system.

Home and Garden Equipment Repair and Maintenance

POSTED

about 24 hours ago

DEADLINE

Precision Valve Assembly Manufacturing & SupplyThe contract requires the manufacture and delivery of 14 precision valve assemblies identified by NSN 4820016735098, fully compliant with military specifications. The scope encompasses all phases of production including design validation, manufacturing, rigorous testing, and comprehensive documentation to ensure compliance and operational readiness for defense applications. The work must be performed at the New Cumberland facility with a zip code of 17070-5002, and the contractor is expected to adhere to the stringent quality and fidelity standards required for military-grade components. The solicitation is classified as a subcontract under NAICS code 332912, issued by the Department of Defense through the DDSP New Cumberland Facility. The opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026, indicating a tight timeline for proposal submission. Although no specific set-aside designation is provided, the contract is accessible to qualified subcontractors within the defense supply chain. All deliverables must meet exacting technical requirements and be supported by complete records to facilitate inspection and acceptance by federal authorities.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 24 hours ago

DEADLINE

Domestic Transportation of Defense SuppliesThe contract obligates the contractor to transport defense supplies exclusively via U.S.-flag vessels, with any use of foreign-flag vessels requiring formal justification and approval. Compliance with transportation regulations is enforced through reporting via the Web Automated Waybill Facility, ensuring full traceability and adherence to federal standards. All operations must be conducted in alignment with the North American Industry Classification System code 483110, which pertains to coastal and Great Lakes water transportation. Performance is centered at the New Cumberland, Pennsylvania location with a zip code of 17070-5002, and the contracting entity is the DDSP New Cumberland Facility under the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is classified as a subcontract under an open solicitation status with no set-aside provisions specified.

POSTED

about 24 hours ago

DEADLINE

Cybersecurity Compliance & NIST SP 800-171 AssessmentThe contract requires the implementation and assessment of cybersecurity controls to safeguard Covered Defense Information in full compliance with NIST SP 800-171 and DFARS regulations. The scope centers on ensuring that all technical, operational, and management controls outlined in the NIST framework are properly deployed, documented, and validated across systems handling sensitive defense data. This includes conducting a thorough evaluation of current security postures, identifying gaps, and executing corrective actions to achieve and maintain compliance. The work must be performed at the designated facility in New Cumberland, Pennsylvania, with a strict deadline for proposal submission by July 28, 2026. As a subcontract under the Department of Defense, the effort is critical to supporting national security objectives and will be subject to rigorous oversight to confirm adherence to federal cybersecurity mandates. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services, underscoring the technical nature of the required deliverables.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThis contract requires strict compliance with hazard labeling and safety data sheet (SDS) management protocols for all hazardous materials used in component handling or packaging operations. The work must ensure that all materials are properly identified with accurate, up-to-date labels and that corresponding SDS documentation is maintained, accessible, and in full alignment with regulatory standards. The subcontractor is expected to implement systems that guarantee continuity and accuracy in hazard communication throughout the lifecycle of material handling, from receipt to packaging and final transfer. The contract was posted on July 23, 2026, with a response deadline of July 28, 2026, and is associated with the NAICS code 541620, indicating services in environmental consulting and related scientific and technical fields. The performance location is designated as New Cumberland, Pennsylvania, 17070-5002, under the oversight of the Department of Defense's DDSP New Cumberland Facility. All activities must be conducted to meet federal requirements for workplace safety and hazardous material handling, with no set-aside provisions specified, making it open to qualified subcontractors regardless of business size or status.

Environmental Consulting Services

POSTED

about 24 hours ago

DEADLINE

Military Packaging and Labeling ServicesThe contract requires specialized services for the individual packaging, immobilization, and serialized container labeling of defense equipment in strict accordance with military standards. All work must ensure the integrity, traceability, and readiness of military assets throughout the supply chain, with each item uniquely identified and securely contained to meet operational and logistical requirements. The services are critical for maintaining compliance with Department of Defense protocols and ensuring that equipment remains protected, identifiable, and deployable under all conditions. This is a subcontract opportunity issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated for the ZIP code 17070-5002 in New Cumberland. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026. The NAICS code 561910 indicates the scope falls under Other Support Activities for Transportation, reflecting the specialized logistics and handling nature of the work. Bidders must be prepared to demonstrate capability in military-grade packaging, serialization, and labeling processes, with full adherence to applicable defense specifications without exception.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Electro-Mechanical Actuator SupplyThe contract calls for the supply of a specific electro-mechanical rotary actuator with part number 20007 ASSY 2, intended for defense applications that demand strict adherence to military-grade packaging, labeling, and regulatory standards. The equipment must meet all technical and compliance requirements necessary for secure military use, with no tolerance for deviation from established protocols. The solicitation is issued as a subcontract under the NAICS code 334516, with the Department of Defense through its DDSP NEW CUMBERLAND FACILITY as the overseeing organization, and performance is required at the facility located in NEW CUMBERLAND, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, indicating a short and time-sensitive acquisition window. Bidders must be prepared to demonstrate full capability in fulfilling defense-specific obligations, including documentation, quality assurance, and delivery timelines aligned with military operational needs. The contract is not designated for any specific set-aside category, meaning it is open to general industry participation provided all technical and regulatory criteria are met. The official solicitation can be accessed via the DIBBS platform using the provided link, and potential offerors are expected to comply with all federal procurement regulations applicable to defense contractors.

Analytical Laboratory Instrument Manufacturing

POSTED

about 24 hours ago

DEADLINE

DISK, VALVEThe contract specifies the procurement of a disc assembly for a 2-1/2 inch relief valve, identified by NSN 4820-00-467-2913 and part number 07915005000 from Emerson Automation Solutions, classified as a critical application item. The requirement is for a single unit with no allowable quantity variance, to be delivered FOB origin within 168 days, with a required ship date of January 19, 2027, and an original delivery deadline of July 8, 2027. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and unit containment, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. The item must be palletized per DLA standards and shipped to the DDSP New Cumberland Facility in Pennsylvania. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Acceptance and inspection are both designated at the destination, and the contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the solicitation number SPE7MC-26-T-146G was issued under the NAICS code 332911 with a response deadline of August 3, 2026, and the contracting office contact is Paula McClary at DLA.

Industrial Valve Manufacturing

POSTED

about 24 hours ago

DEADLINE

SEAT, VALVEThe contract pertains to the supply of a SEAT, VALVE with part number 264080102-45CD and NSN 4820014789171, limited to Electric Boat Corporation with no foreign suppliers permitted. The item must comply with stringent DLA packaging and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, lamps, sensors, or weapons systems specified by NAVSEA, with additional safeguards required for portable mercury-containing devices. Delivery is set for 168 days after award, FOB origin, with zero tolerance for quantity variance, and the full shipment of 67 units must be packaged per MIL-STD-2073-1E and marked in accordance with MIL-STD-129 without special markings. Palletization follows DLA packaging guidelines, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania; the original required delivery date is October 7, 2027, with a need ship date of January 19, 2027. The solicitation number is SPE7MC-26-T-152H, issued under NAICS 332911 by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula McClary, and the contract is subject to DLA transport and freight procedures as outlined in specific procurement notes.

Industrial Valve Manufacturing

POSTED

about 24 hours ago

DEADLINE

VALVE, BUTTERFLYThe contract is for the procurement of two butterfly valves without operators, identified by NSN 4820-01-259-5719 and part number 144-703-035-360-036, furnished under solicitation SPE7MC-26-T-148D. Delivery is required within 168 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods and packaging codes. All packaging, preservation, and marking must be free of mercury or mercury compounds, except for functional uses in approved items like batteries or sensors as defined by NAVSEA, and portable devices containing mercury must have a secondary containment system. The use of Class I ozone-depleting chemicals is entirely prohibited, with any substitute chemicals requiring prior approval. The valves must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, controlled by the revision in effect on the solicitation issue date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the unit of issue is each. The contract sets a required ship date of January 19, 2027, with an original delivery deadline of March 19, 2027, and is managed by the Department of Defense through the DDSP New Cumberland Facility, with primary point of contact Paula Mcclary.

Industrial Valve Manufacturing

POSTED

about 24 hours ago

DEADLINE