Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials & Safety Data Sheet (SDS) Compliance

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the authoring and submission of Safety Data Sheets (SDS) and hazard labels fully compliant with the Globally Harmonized System (GHS) and U.S. regulatory standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001. All documentation must accurately reflect the hazards associated with materials used in production or packaging, ensuring alignment with federal requirements for hazard communication. The deliverables must be precise, up to date, and tailored to meet the strict compliance expectations of the Department of Defense, specifically the Active Devices Division, with performance located in Tracy, California, ZIP 95304-5000. This subcontract, categorized under NAICS code 541620 for scientific and technical consulting services, has a response deadline of July 30, 2026, with the solicitation posted on July 19, 2026. The work involves not only creating SDS documents and labels but also ensuring ongoing regulatory alignment as material compositions or regulations evolve. Failure to meet these standards could result in non-compliance penalties and operational disruptions, making technical accuracy, regulatory expertise, and timely submission critical to fulfilling the contract obligations.

General Info

Author and submit GHS and OSHA-compliant SDS and hazard labels for DoD in Tracy, CA by July 30, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Authoring and submission of GHS-compliant Safety Data Sheets (SDS) and hazard labels in accordance with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 for any hazardous materials used in production or packaging.

Similar Contracts

Same NAICS industry code

IFB - ENVIRONMENTAL CONSULTING SERVICES FOR BFDThe City of Boston Fire Department is soliciting bids for environmental consulting services under solicitation number BD-27-1142-221-221-131415, with the invitation for bids posted on July 20, 2026, and responses due by August 5, 2026, at 5:00 PM. This procurement is intended to secure professional environmental expertise to support the operations and compliance needs of the Fire Department, with all work to be performed within Massachusetts. Interested parties must submit their proposals through the City of Boston Supplier Portal, and technical inquiries or additional details can be directed to Cheyenne Candlin at 617-343-2153 or BFDbuys@boston.gov. The contract is managed by the Fire Department as the agency, under the state of Massachusetts, and no specific set-aside classification is indicated, meaning it is open to all qualified bidders without preference for small, minority, or women-owned businesses. All bids must comply with the requirements outlined in the official solicitation accessible via the provided Commbuys link.

221 - Fire Department

POSTED

about 6 hours ago

DEADLINE

Second Supplemental Recirculated Environmental Impact Report (SSREIR) for Revisions to Title 19- Kern County Zoning Ordinance (2024) focused on oil and gasThe project involves the permanent plugging and abandonment of well Star Fee I39-1 in the Cymric Oil Field, California, under the regulatory framework of the Second Supplemental Recirculated Environmental Impact Report for revisions to Kern County’s Title 19 Zoning Ordinance focused on oil and gas operations. No new infrastructure, pipelines, or additional facilities are planned, and the work is confined to well cessation activities with no reworking or liner addition as initially referenced. The activity falls under NAICS code 541620 and is administered by Kern County, California, with primary point of contact Craig M Murphy and senior environmental advisor Gulsum Rustemoglu. The solicitation number PLO26-00898 indicates this is a special-notice filing, not a competitive procurement, and all supporting documentation is tied to environmental compliance under CEQA rather than a formal contract with pricing, delivery schedules, or performance clauses. Location and equipment specifics are detailed in the Site Plan referenced in the NOE, but no contract value, term length, inspection criteria, or delivery terms are provided. The procedural path relies on regulatory exemptions and environmental documentation rather than traditional contracting mechanisms.

POSTED

about 13 hours ago

DEADLINE

Environmental Compliance and Monitoring

Parks Canada Agency

POSTED

about 15 hours ago

DEADLINE

Environmental, Engineering & Socio-Economic SvcsThe Government of the Northwest Territories, acting through Procurement Shared Services on behalf of the Department of Infrastructure, is seeking qualified service providers to enter into a non-exclusive Standing Offer Agreement for Environmental, Engineering, and Socio-Economic Support Services related to the Arctic Economic and Security Corridor. The solicitation, identified as EV9053, was posted on July 9, 2026, with a response deadline of August 7, 2026, at 5:00 p.m. local time. The work is focused exclusively on projects within the Northwest Territories, with the NAICS code 541620 indicating that the services fall under Environmental Consulting and Related Services. Proposals must address a broad scope of expertise including environmental assessments, engineering studies, and socio-economic analysis to support infrastructure and economic development initiatives along the Arctic corridor. Addendum 01, issued on the same day as the posting, may contain critical updates or clarifications that proposers must incorporate. All submissions must be directed to the designated Contract Administrator at psstenders@gov.nt.ca or via phone at 867-767-9044, and tender documents can be accessed through the official government procurement portal. Participation is open to all eligible vendors without set-aside restrictions, and the agreement will operate on a non-exclusive basis, allowing multiple suppliers to be retained for future task assignments.

Government of the Northwest Territories

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for all hazardous materials involved in production or packaging operations at the DDSP NEW CUMBERLAND FACILITY. This subcontract, classified under NAICS code 541620, is managed by the Department of Defense and mandates adherence to federal safety and regulatory standards to ensure proper communication of chemical hazards to workers and handlers. The deliverables must meet current regulatory requirements for accuracy, formatting, and accessibility, and are critical to maintaining compliance and operational safety within the facility. All submissions are due by July 30, 2026, with the solicitation posted on July 19, 2026, and performance expected to occur at the designated location in New Cumberland, Pennsylvania, with ZIP code 17070-5002. While specific point of contact details are not provided, prospective subcontractors must respond through the official DIBBS portal linked in the solicitation. No set-aside provisions are indicated, meaning the opportunity is open to all eligible firms. Failure to deliver compliant documentation could result in disruption of production, regulatory penalties, or contract termination.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThis contract mandates strict adherence to federal regulations regarding the handling, storage, and disposal of toxic and hazardous materials, with specific enforcement of prohibitions on hexavalent chromium as required by DFARS and OSHA standards. All applicable hazard warning labels must be properly applied to containers and work areas to ensure personnel safety and regulatory compliance. The work is scoped under a subcontract classified as a Women-Owned Small Business Set-Aside, targeting firms certified under the WOSB program, and falls under the NAICS code 541620 for scientific research and development services. Performance is designated at Robins Air Force Base, Georgia, with all activities required to align with Department of Defense directives. Proposals must be submitted by the stated deadline, and compliance with environmental and occupational safety protocols is non-negotiable for award consideration.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous and Radioactive Material Compliance & LabelingThe contract pertains to the preparation and submission of hazard warning labels, Safety Data Sheets, and radioactive material disclosures for defense-related supplies, ensuring full compliance with DFARS, OSHA, and MIL-STD-129 regulations. This subcontract requires precise adherence to federal standards governing the identification, labeling, and documentation of hazardous and radioactive materials to support safe handling, transport, and storage within the Department of Defense supply chain. All deliverables must meet strict military and occupational safety requirements, with accuracy and timeliness being critical to avoid disruptions in logistics and operations. The work is to be performed in San Diego, California, with a response deadline of July 30, 2026, and the solicitation is categorized under NAICS code 541620, which corresponds to management, scientific, and technical consulting services. The contracting entity is the Land Supply Chain under the Department of Defense, indicating this effort is part of a broader initiative to maintain regulatory compliance across defense logistics networks. While specific performance metrics or technical specifications are not detailed here, the nature of the work demands expert knowledge in regulatory frameworks, material safety documentation, and military labeling protocols, with failure to comply potentially resulting in contract non-conformance or rejection of delivered supplies.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Handling and LabelingThe contract pertains to the handling and labeling of hazardous materials in accordance with Safety Data Sheet (SDS) compliance and OSHA's Hazard Communication Standard (HAZCOM). It requires proper identification, packaging, labeling, and documentation of all hazardous substances to ensure workplace safety and regulatory alignment. The work must be performed at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified under NAICS code 541620, indicating it falls within the scientific and technical consulting services category. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of July 27, 2026, and the solicitation was posted on July 19, 2026. All parties must adhere strictly to federal safety regulations and maintain accurate records to meet compliance obligations throughout the execution of the work.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires identification of hazardous materials used in manufacturing and packaging processes, along with the preparation of Safety Data Sheets (SDSs) to ensure full compliance with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement (DFARS) 252.223-7001. The work is focused on maintaining regulatory adherence for defense-related supply chains, with all documentation and procedures must align with federal safety and disclosure requirements. The scope demands detailed knowledge of chemical handling, classification, labeling, and reporting to support safe operations within Department of Defense manufacturing environments. This is a small business set-aside subcontract under NAICS code 541620, issued by the ASC Commodities Division of the Department of Defense, with performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contract emphasizes accuracy in hazard identification and documentation, critical for ensuring workforce safety and contractual compliance in defense logistics operations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous & Radioactive Materials Compliance SupportThe contract requires comprehensive compliance support for the identification, labeling, and documentation of hazardous and radioactive materials in accordance with 29 CFR 1910.1200 and MIL-STD-129. Responsibilities include preparing accurate Safety Data Sheets for all regulated substances and ensuring immediate notification to government authorities regarding the presence of radioactive content. All work must be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000. This subcontract under NAICS code 541620 is issued by the ASC Commodities Division of the Department of Defense and is open for responses until July 27, 2026, with the posting date listed as July 19, 2026. The nature of the work demands strict adherence to federal and military standards for chemical safety and radiological reporting.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract pertains to the identification, labeling, and regulatory documentation of hazardous materials linked to the CAM CONTROL component, with a focused requirement on preparing Safety Data Sheets and ensuring full compliance with OSHA’s Hazard Communication Standard. This subcontract is part of a broader effort by the Department of Defense’s Land Supply Chain to manage chemical safety and regulatory adherence for critical defense components, emphasizing accurate hazard classification, proper labeling, and up-to-date documentation to support workplace safety and regulatory inspections. The work must be performed at the specified location in Portsmouth, NH, with a zip code of 03801-5000, and all deliverables must meet federal standards for hazardous material management. The solicitation, posted on July 19, 2026, requires responses by July 30, 2026, and falls under NAICS code 541620, which classifies it under environmental consulting services. While no set-aside designation or specific organization type is indicated, the nature of the work demands expertise in chemical compliance, regulatory documentation, and defense supply chain protocols. The contract does not list a point of contact, and all inquiries must be directed through the DIBBS portal linked in the posting. Successful proposers must demonstrate proven capability in handling hazardous material documentation for government or defense applications and must be prepared to support ongoing compliance throughout the lifecycle of the CAM CONTROL component.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheets (SDS) ManagementThe contract involves the preparation and management of hazard warning labels and Safety Data Sheets (SDS) to ensure full compliance with OSHA, DFARS, and federal regulations governing hazardous materials. The work requires precise labeling and documentation to meet stringent safety and reporting standards applicable to defense and medical supply chain operations. The subcontract is associated with the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance expected to occur at Fort Hood, Texas, under the NAICS code 541620 for scientific and technical consulting services. All deliverables must align with federal requirements to support safe handling, storage, and transportation of hazardous substances within military and medical logistics networks. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, indicating a limited window for proposal submission. The contract is structured as a subcontract, suggesting it is part of a broader government acquisition effort, likely supporting the Department of Defense’s supply chain infrastructure. Compliance with all applicable regulations is non-negotiable, and contractors must demonstrate expertise in hazardous materials documentation and the ability to maintain current, accurate SDS and label data under evolving federal standards. The absence of a set-aside designation or point of contact implies that the solicitation may serve as a general notice for qualified vendors, with further details to be provided upon award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SWITCH, RADIO FREQUEThis contract solicits two units of a radio frequency switch with part number 5985-01-463-5144, under solicitation SPE7M5-26-T-336M, for delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and must meet or exceed the specifications of the cited technical data even if incomplete. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with designated verification levels or AQLs. The supplier must ensure all packaging complies with MIL-STD-2073-1E and MIL-STD-129, with special emphasis on ESD and EMI protection as mandated by MIL-PRF-81705, using only materials from qualified manufacturers listed on QPL-81705. ESD protection requires Type I barrier material and Type III wrap unless specified otherwise, and EMI protection requires Type I barrier material. Components with pins or leads must have adequate cushioning to prevent physical damage during handling and transport, and all packaging must be executed at approved ESD/EMI protective workstations. The item is subject to DOD Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and the supplier is responsible for adherence to DLA packaging requirements, including proper marking with special code 39 indicating ESD-sensitive electronic device status. Delivery is due in 157 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes specific transportation instructions per DLAD Proc Note C19 and C20, with a required delivery date of November 26, 2027, and a need ship date of January 5, 2027.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

COVER, ELECTRICAL COThe contract pertains to the procurement of 10 units of a COVER, ELECTRICAL CONNECTOR identified by NSN 5935-01-589-5332 and part number 923371, manufactured by ERNI COMPONENTS INC DBA 6V439. The item must be delivered within 20 days of contract award FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging and marking must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129, and Fed-Std-313, with non-hazardous items requiring commercial packaging per ASTM D3951 unless superseded by a更高 priority DLA requirement. Palletization must adhere to RP001, and each unit pack must reflect the specified QUP of 001. The delivery is directed to the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by DLAD Proc Notes C19 and C20. The item is marked for government use under the reference W81NMJ61920043, with an original required delivery date of July 16, 2026, and is issued under solicitation SPE7M5-26-T-336L. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract is assigned NAICS code 335931 with primary point of contact Margaret Smith from the Department of Defense’s Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThe contract pertains to the procurement of three digital microcircuits with NSN 5962-01-233-4079 under solicitation SPE7M5-26-T-336N, with a delivery schedule of 222 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is classified as qualified under FSC 5962 and must comply with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List as outlined in Procurement Note M01. Physical identification and marking of the bare item are required per RQ017, and packaging must adhere to DLA packaging standards. The contractor is obligated to retain complete supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016, ensuring end-to-end provenance throughout the supply chain. Government identification must be removed from any non-accepted supplies. The solicitation is open for responses until July 31, 2026, with the point of contact being Margaret Smith of the Department of Defense's Active Devices Division, based in Columbus, Ohio. The NAICS code 334413 indicates the procurement falls under semiconductor and related device manufacturing. An alternate offeror must submit a complete data package covering both the primary and alternate part specifications.

Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of 26 units of a linear microcircuit, identified by NSN 5962-01-051-2101, under solicitation SPE7M5-26-T-336S, which is a total small business set-aside with a NAICS code of 334413. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent quality, traceability, and packaging requirements mandated by the Defense Logistics Agency. All suppliers must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and must be qualified under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962. Traceability documentation must be meticulously maintained in accordance with DLA Directive Procurement Note C03 and submitted via the DLA Land and Maritime Form 918, which must be emailed to the contract administrator at least 15 days prior to delivery with all attachments compressed to under 15 MB and properly labeled. Shipment is prohibited until explicit written authorization is received, and failure to comply with documentation accuracy or timing voids payment eligibility. The contractor must also adhere to physical marking requirements per IPC/JEDEC J-STD-609 for lead finish identification on each unit pack, and conform to DLA packaging standards and bare item marking specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Any disclosure to foreign nationals, regardless of location, is prohibited without authorization. The government will not accept surplus material, and all deliveries must be made to Columbus, Ohio within 221 days of award. Primary point of contact for inquiries is Cindy McAninch of the Department of Defense’s Active Devices Division, with all submissions and communications routed through the designated DLA systems and protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

FILTER, RADIO FREQUEThis contract specifies the procurement of a radio frequency interference filter with NSN 5915-00-726-7326 and part number 46438-1, supplied by ONTIC ENGINEERING & MANUFACTURING, INC., HONEYWELL INTERNATIONAL INC., and EMS DEVELOPMENT CORPORATION. The requirement is for 16 units to be delivered FOB origin within 50 days, with no tolerance for quantity variance, and inspection and acceptance occurring at the destination. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 labeling; non-hazardous items must be commercially packaged per DLA guidance, while hazardous items must adhere to TQ requirement IP025. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the unit of issue is each. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment, and the supplier must remove government identification from non-accepted items. The solicitation number is SPE7M5-26-T-336P, issued by the Department of Defense’s Active Devices Division, with a response deadline of July 31, 2026, and an original delivery due date of September 12, 2027. Shipments must follow DLAD Proc Notes C19 and C20, and all documentation must align with the approved unit of issue per the DLA reference link.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

CONNECTOR, RECEPTACLThe contract is for a single unit of a connector, receptacle, identified by NSN 5935-01-376-1977, under purchase request 7017539670, with delivery required within 20 days after award. It is issued under solicitation number SPE7M5-26-T-336K, posted on July 20, 2026, with responses due by July 31, 2026. The procurement falls under NAICS code 334417 and is managed by the Active Devices Division of the Department of Defense, with performance located in Martinsburg, West Virginia, zip code 25405-7704. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The contractor must comply with DLA packaging requirements and adhere to physical identification and bare item marking standards. Government identification must be removed from non-accepted supplies. The offeror is required to provide a complete data package for both the approved and alternate part, as no data is currently available. Primary point of contact is Margaret Smith, reachable via email and phone provided.

Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

LIGHT EMITTING DIODThis contract specifies the procurement of a light emitting diode item identified by part number 81000-44019 from KOITO MFG CO. LTD, with the NSN 5980-01-652-7500, under solicitation SPE7M5-26-T-336Q. The item is classified as a critical application item and must comply with stringent military and federal standards including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Full supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the item requires Federal Aviation Administration airworthiness approval. Packaging and preservation must follow DLA-specific requirements, including dry packaging methods and E5 unit containers, with no special marking applied. The delivery is FOB origin, to be inspected and accepted at destination, with a fixed quantity of 7 units and zero tolerance for variance. The required delivery date is January 3, 2027, with a 157-day allowable delivery window. All manufacturing and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in sampling unless otherwise directed. Critical attributes are assigned verification level VII and an AQL of 0.1, major attributes level IV and AQL 1.0, and minor attributes level II and AQL 4.0. The item is subject to FAA bare item marking requirements and the contractor must remove any government identification from non-accepted supplies. The unit price is $7.00, with a total contract value of $49.00. Delivery instructions direct shipment to the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract was posted on July 20, 2026, with a response deadline of July 31, 2026, and is managed by the Department of Defense’s Active Devices Division with primary point of contact Margaret Smith.

Metal Window and Door Manufacturing

POSTED

about 3 hours ago

DEADLINE

CONNECTOR BODY, RECEPTAThe contract pertains to the procurement of 18 electrical connector bodies, receptacles, identified by NSN 5935-01-323-6812, under solicitation SPE7M5-26-Q-0741, with a firm fixed price and no allowable variance in quantity. Delivery is required within 90 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item must comply with specification A-A-55463A Revision A, Gen 4, and all packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited unless explicitly approved in writing by the contracting officer, except for commercial items as defined in FAR 11.001 or part-numbered-only items. Packaging and handling instructions specify the use of preservative methods, materials, and unit containers as outlined in the documented standards. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must follow DLAD Proc Note C19 and C20. All technical and quality requirements are incorporated by reference from the DLA Master List, with compliance based on the revision in effect at the solicitation issue date. The procurement is open to full and open competition, and the contract includes strict requirements for the removal of government identification from non-accepted supplies and physical identification of bare items.

Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

BACKSHELL, ELECTRICAThe contract specifies the procurement of 14 units of a backsHELL, ELECTRICA with NSN 5935-01-244-6487 under solicitation SPE7M5-26-Q-0742, requiring firm fixed pricing with no variance in quantity. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including compliance with SAE-AS85049C and MIL-C-85049A specifications, and is subject to qualification under the Qualified Products List for connector assemblies. The use of ozone-depleting substances in any phase of manufacturing or processing is strictly prohibited without written approval from the contracting officer, and this restriction overrides all other specifications unless exempted for commercial items or part-numbered-only items. The item must be packaged in accordance with DLA Packaging Requirements, MIL-STD-129 labeling, and ASTM D3951 for non-hazardous materials, with all packaging and palletization adhering to RP001 guidelines. Delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania within 143 days after order date, with inspection and acceptance occurring at destination. The unit of issue is each, and transportation details follow DLAD procedural notes C19 and C20. The contract requires full and open competition, with no set-aside provisions, and the point of contact is Barbara Hoffmann of the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

ELECTRON TUBEThe contract specifies the procurement of 13 electron tubes, specifically cathode ray tubes, identified by part number A06A0788-12 and NSN 5960-00-553-5792, under solicitation SPE7M5-26-Q-0737. Delivery is required within 354 days of award, with performance taking place at Robins Air Force Base, Georgia. The item is designated as covered defense information, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date. The procurement is subject to stringent configuration control through Engineering Change Proposal and variance request processes, and inspection and acceptance must occur at the origin of supply. Government identification must be removed from any non-accepted items, and the associated technical data is subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. The responsible office is the Department of Defense’s Active Devices Division, with Harold Campbell listed as the primary point of contact.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

CAPACITOR, FIXED, MICThis contract specifies the procurement of a fixed micro capacitor under NSN 5910-01-208-6473, with a requirement for 72 units to be delivered within 89 days from the contract award, FOB origin. The item must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All packaging and preservation must conform to SPE7M5-26-T-336R, Section B, and MIL-DTL-39028 for capacitors. The contractor must apply specific lead finish markings per IPC/JEDEC J-STD-609 on each unit package, clearly identifying lead content, and must avoid all Class I ozone-depleting substances in manufacturing unless written approval is obtained from the contracting officer. Acceptance testing follows Army Drawing 18876-11436863, with waiver of paragraph 6 permitted only for previously accepted manufacturers, though DSCC retains the right to reinstate requirements at any time. Sampling procedures require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise directed, with unspecified attributes considered major. The contract prohibits any variance without formal request and mandates removal of government identification from non-accepted items. Delivery is directed to DLA Distribution at New Cumberland, PA, with required ship date set for October 29, 2026. Unit price is $72.00 per unit, totaling $5,184.00, and all data aligns with the solicitation SPE7M5-26-T-336R issued by the Department of Defense’s Active Devices Division.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

Cybersecurity Compliance & CUI Safeguarding (NIST SP 800-171)The contract requires implementation and maintenance of NIST SP 800-171 controls to protect covered defense information in accordance with DFARS 252.204-7012, ensuring robust cybersecurity safeguards for Controlled Unclassified Information. This subcontract is under the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, and is subject to the NAICS code 541512, indicating it relates to computer systems design services. Compliance is mandatory and must be sustained throughout the contract lifecycle to meet federal cybersecurity standards for handling sensitive defense data. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, requiring timely submission of proposals demonstrating capability to meet all NIST SP 800-171 requirements. Contractors must be prepared to demonstrate full adherence to the 110 security controls across 14 families, including access control, audit, configuration management, and incident response, and must maintain continuous compliance through documentation, assessments, and reporting. Failure to meet these standards could result in contract termination or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

DEADLINE