Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of hazard classification, Safety Data Sheets, and globally harmonized system-compliant labeling for an elbow fitting, specifically when it contains hazardous substances, ensuring full alignment with DFARS 252.223-7001 and OSHA’s Hazard Communication Standard 29 CFR 1910.1200. The work must meet federal defense procurement mandates and workplace safety regulations, delivering accurate and standardized documentation to identify chemical risks and safe handling procedures. This service is essential for compliance across the Department of Defense supply chain, where proper hazard communication is a non-negotiable requirement for worker safety and regulatory adherence. The contract is a subcontract under the Defense Logistics Agency, classified under NAICS code 541620, indicating it relates to scientific and technical consulting services. It was posted on July 20, 2026, and applies to performance within the broader Department of Defense infrastructure without a specified physical location. The recipient must ensure all deliverables—classification, SDS, and labeling—reflect current regulatory standards and are traceable to the specific product, with no tolerance for non-compliance or ambiguity in hazard communication. Failure to meet these requirements could result in rejection of deliverables and potential contractual penalties under federal acquisition guidelines.

General Info

Provide compliant hazard classification, SDS, and labeling for elbow fitting per DFARS and OSHA standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide hazard classification, Safety Data Sheets (SDS), and GHS-compliant labeling for the elbow fitting if it contains hazardous substances, in accordance with DFARS 252.223-7001 and OSHA HAZCOM (29 CFR 1910.1200).

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive regulatory compliance services for hazardous materials, focusing on accurate hazard labeling, preparation and maintenance of Safety Data Sheets (SDS), and OSHA-compliant safety reporting to ensure adherence to federal workplace safety standards. The scope centers on supporting safe handling, storage, and transportation of hazardous substances across defense operations, with all documentation and labeling required to meet current regulatory frameworks. This subcontract, issued under NAICS code 541620 for environmental consulting services, is managed by the Defense Logistics Agency under the Department of Defense. It is designated for performance in support of federal defense infrastructure, with no specific geographic location specified for the place of performance. The contract was posted on July 20, 2026, and is tracked under the DIBBS system with the contract identification SPE7L426D61CZ and delivery order SPE7L026F5662.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract requires comprehensive regulatory compliance support for hazardous material labeling, safety data sheet creation, and hazard communication services aligned with DFARS 252.223-7001 and 29 CFR 1910.1200, ensuring adherence to federal procurement and workplace safety standards. Specific attention must be given to mercury containment protocols as outlined in NAVSEA 5100-003D, requiring precise handling, documentation, and labeling procedures for materials containing mercury within Department of Defense operations. All services must be delivered to meet the stringent requirements of the Medical Supply Chain MD Surg FSF, with performance based at Pearl Harbor, HI, under the NAICS code 541620 for scientific and technical consulting services. The subcontract type indicates this effort supports a larger federal acquisition, and responders must submit proposals by the deadline of July 27, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Material Safety Data Sheet (MSDS) Management and DocumentationThe contract requires the preparation, updating, management, and submission of Material Safety Data Sheets for hazardous materials, ensuring strict adherence to OSHA, GHS, and DLA regulatory standards. All documentation must be maintained with a minimum three-year retention period to support compliance and audit readiness. The work is to be performed for the Department of Defense’s Medical Supply Chain Pharm FSA, with the place of performance located in Groton, Connecticut, at the zip code 06340-4905. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to health and safety compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and additional information can be accessed through the DIBBS platform.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 15 hours ago

DEADLINE

Hazardous Material Compliance and Safety Data SubmissionThe contract requires identification of hazardous materials used in packaging processes and the preparation of Safety Data Sheets and hazard labels that comply with federal and Defense Department regulations. The work is focused on ensuring all hazardous substances are properly documented and labeled according to established safety standards, with an emphasis on alignment with defense-specific requirements. This includes thorough evaluation of materials throughout the packaging workflow to determine potential risks and to generate accurate, regulatory-compliant documentation. The subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is posted for potential bidders as of July 20, 2026, with performance expected to support defense supply chain operations. Although location details are unspecified, the obligations are tied to federal and military compliance frameworks, necessitating familiarity with OSHA, DOT, and other relevant hazardous materials handling regulations. Success in this effort requires expertise in hazardous material classification, SDS authoring, and labeling protocols aligned with defense procurement standards.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires the preparation and submission of Safety Data Sheets and hazard labels for the TCOM-200-PUR-DB cable to ensure compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This work is critical to meeting federal safety and regulatory standards for hazardous materials handling, labeling, and documentation within the Department of Defense supply chain. The deliverables must accurately reflect the chemical composition, physical and health hazards, and proper handling procedures for the cable to support safe usage and transport across military and contractor environments. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is classified as a subcontract under NAICS code 541620 for scientific and technical consulting services. Performance location is designated as Tobyhanna, Pennsylvania, with a zip code of 18466-5050, indicating the work is tied to Defense Logistics Agency operations at this site. The contract falls under the Land Supply Chain organization within the Department of Defense, and bidders must ensure their submissions align with all applicable federal regulations governing hazardous materials documentation and labeling for defense-related products.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations. This subcontract is focused on ensuring accurate, up-to-date, and legally compliant documentation for hazardous materials used or handled by the Department of Defense. All deliverables must align with federal safety standards to support proper hazard communication, worker protection, and supply chain accountability within defense operations. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the NAICS code 541620, which corresponds to scientific and technical consulting services. The contracting activity is under the Active Devices Division of the Department of Defense, indicating this effort supports specialized defense systems requiring strict adherence to hazardous materials management protocols. Subcontractors must be prepared to meet detailed regulatory requirements without deviation and ensure their documentation is traceable, standardized, and immediately accessible for audit or inspection purposes.

ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

Sustainable Procurement Compliance SupportThe contract titled Sustainable Procurement Compliance Support is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, aimed at providing expert advisory and documentation services to ensure adherence to federal sustainable procurement initiatives. This includes comprehensive support for programs such as BioPreferred, ENERGY STAR, SNAP, and the Comprehensive Procurement Guideline program, helping the contractor meet mandatory federal requirements for environmentally preferable purchasing. The work focuses on developing, implementing, and maintaining compliance systems that align with federal mandates, ensuring proper documentation, reporting, and audit readiness across all relevant sustainability benchmarks. The contract was posted on July 20, 2026, and is classified under NAICS code 541620, indicating it involves management consulting services specifically tailored to environmental and sustainability compliance. Performance location details are not specified, and there is no set-aside designation indicated. The subcontract is part of a broader effort by the Department of Defense to institutionalize sustainable procurement practices, requiring specialized knowledge to navigate complex federal guidelines and reporting structures. The contract's success depends on accurate tracking of product compliance, supplier engagement, and the delivery of actionable documentation that confirms adherence to each program’s standards.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Reporting and Labeling SupportThe contract pertains to the identification, labeling, and documentation of hazardous materials used in packaging or directly associated with the conduit, requiring full compliance with applicable safety and regulatory standards. Contractors must ensure accurate labeling of all hazardous substances and submit hazard warning labels for approval prior to contract award if such submission is mandated by regulations or agency requirements. This effort is critical to ensure the safe handling, storage, and transportation of materials throughout the supply chain and to meet federal safety protocols. The work falls under NAICS code 541620, indicating it involves environmental consulting and related services, and is issued as a subcontract under the Defense Logistics Agency within the Department of Defense. Although specific performance location and point of contact details are unspecified, the requirement is tied to a contract with the identifying number SPE4A626D5710, and the solicitation was posted on July 20, 2026. The contractor is expected to provide thorough documentation and labeling processes that align with federal hazardous materials regulations and are capable of being audited or reviewed by DoD oversight entities.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and material safety data sheets for electronic components that contain hazardous substances, ensuring full compliance with both DFARS and OSHA standards. This work is critical for maintaining regulatory adherence across the Department of Defense supply chain, particularly for components procured under Defense Logistics Agency oversight. The services must accurately identify, document, and communicate risks associated with hazardous materials within electronic systems, supporting safe handling, storage, and disposal procedures throughout military operations. The contract is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services, specifically tailored to regulatory compliance in hazardous materials management. It was posted on July 20, 2026, and is linked to the award identification SPE7M526V6191, with performance occurring within the broader scope of Department of Defense operations. Although specific geographic details or point of contact information are not provided, the requirement is centralized under the Defense Logistics Agency, which manages the logistics and compliance infrastructure for defense contractors nationwide.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 15 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 15 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 15 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE