Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Labeling Services

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks specialized services to ensure full compliance with hazardous materials regulations for defense suppliers, focusing on the development and provision of accurate hazard communication labeling and up-to-date Safety Data Sheets. All deliverables must align with federal toxic substance restrictions and industry-standard safety protocols to support the Department of Defense’s supply chain integrity. The work is classified as a total small business set-aside under SBA guidelines, reserved exclusively for small businesses certified under the Small Business Administration’s programs. The NAICS code 541620 identifies the scope as scientific and technical consulting services, indicating the need for expert environmental and regulatory compliance knowledge. Work must be performed at the designated location in Tracy, California, with a zip code of 95304-5000, and proposals must be submitted before the deadline of July 30, 2026. The solicitation is open for subcontractors supporting LAND SUPPLIER OPNS ENGINES, ensuring that all delivered materials meet stringent defense industry safety and documentation requirements.

General Info

Small business contract for hazardous materials compliance labeling and SDS in Tracy, California, due July 30, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINES

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide hazard communication labeling, Safety Data Sheets (SDS), and compliance with toxic substance restrictions for defense suppliers.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive regulatory compliance services for hazardous materials, focusing on accurate hazard labeling, preparation and maintenance of Safety Data Sheets (SDS), and OSHA-compliant safety reporting to ensure adherence to federal workplace safety standards. The scope centers on supporting safe handling, storage, and transportation of hazardous substances across defense operations, with all documentation and labeling required to meet current regulatory frameworks. This subcontract, issued under NAICS code 541620 for environmental consulting services, is managed by the Defense Logistics Agency under the Department of Defense. It is designated for performance in support of federal defense infrastructure, with no specific geographic location specified for the place of performance. The contract was posted on July 20, 2026, and is tracked under the DIBBS system with the contract identification SPE7L426D61CZ and delivery order SPE7L026F5662.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Material Safety Data Sheet (MSDS) Management and DocumentationThe contract requires the preparation, updating, management, and submission of Material Safety Data Sheets for hazardous materials, ensuring strict adherence to OSHA, GHS, and DLA regulatory standards. All documentation must be maintained with a minimum three-year retention period to support compliance and audit readiness. The work is to be performed for the Department of Defense’s Medical Supply Chain Pharm FSA, with the place of performance located in Groton, Connecticut, at the zip code 06340-4905. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to health and safety compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and additional information can be accessed through the DIBBS platform.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 11 hours ago

DEADLINE

Hazardous Material Compliance and Safety Data SubmissionThe contract requires identification of hazardous materials used in packaging processes and the preparation of Safety Data Sheets and hazard labels that comply with federal and Defense Department regulations. The work is focused on ensuring all hazardous substances are properly documented and labeled according to established safety standards, with an emphasis on alignment with defense-specific requirements. This includes thorough evaluation of materials throughout the packaging workflow to determine potential risks and to generate accurate, regulatory-compliant documentation. The subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is posted for potential bidders as of July 20, 2026, with performance expected to support defense supply chain operations. Although location details are unspecified, the obligations are tied to federal and military compliance frameworks, necessitating familiarity with OSHA, DOT, and other relevant hazardous materials handling regulations. Success in this effort requires expertise in hazardous material classification, SDS authoring, and labeling protocols aligned with defense procurement standards.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires the preparation and submission of Safety Data Sheets and hazard labels for the TCOM-200-PUR-DB cable to ensure compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This work is critical to meeting federal safety and regulatory standards for hazardous materials handling, labeling, and documentation within the Department of Defense supply chain. The deliverables must accurately reflect the chemical composition, physical and health hazards, and proper handling procedures for the cable to support safe usage and transport across military and contractor environments. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, and is classified as a subcontract under NAICS code 541620 for scientific and technical consulting services. Performance location is designated as Tobyhanna, Pennsylvania, with a zip code of 18466-5050, indicating the work is tied to Defense Logistics Agency operations at this site. The contract falls under the Land Supply Chain organization within the Department of Defense, and bidders must ensure their submissions align with all applicable federal regulations governing hazardous materials documentation and labeling for defense-related products.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations. This subcontract is focused on ensuring accurate, up-to-date, and legally compliant documentation for hazardous materials used or handled by the Department of Defense. All deliverables must align with federal safety standards to support proper hazard communication, worker protection, and supply chain accountability within defense operations. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the NAICS code 541620, which corresponds to scientific and technical consulting services. The contracting activity is under the Active Devices Division of the Department of Defense, indicating this effort supports specialized defense systems requiring strict adherence to hazardous materials management protocols. Subcontractors must be prepared to meet detailed regulatory requirements without deviation and ensure their documentation is traceable, standardized, and immediately accessible for audit or inspection purposes.

ACTIVE DEVICES DIVISION

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and material safety data sheets for electronic components that contain hazardous substances, ensuring full compliance with both DFARS and OSHA standards. This work is critical for maintaining regulatory adherence across the Department of Defense supply chain, particularly for components procured under Defense Logistics Agency oversight. The services must accurately identify, document, and communicate risks associated with hazardous materials within electronic systems, supporting safe handling, storage, and disposal procedures throughout military operations. The contract is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services, specifically tailored to regulatory compliance in hazardous materials management. It was posted on July 20, 2026, and is linked to the award identification SPE7M526V6191, with performance occurring within the broader scope of Department of Defense operations. Although specific geographic details or point of contact information are not provided, the requirement is centralized under the Defense Logistics Agency, which manages the logistics and compliance infrastructure for defense contractors nationwide.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance and HandlingThe contract titled Hazardous Materials Compliance and Handling is a subcontract issued by the Department of Defense through its Nuclear Reactor Program, aimed at securing consulting and compliance services related to the proper handling, labeling, and disposal of hazardous materials in alignment with Department of Defense regulations. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility and preference for small businesses as defined by the Farm Bill and FAR 19.5. The NAICS code 541620 identifies the scope of work within environmental consulting services, requiring specialized expertise in regulatory adherence, safety protocols, and documentation for hazardous waste management. Performance of the contract is specifically required at Tracy, California, with a zip code of 95304-5000, indicating the physical location where these services must be rendered. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, allowing potential offerors a window of eleven days to prepare and submit proposals. The contract opportunity is accessible via the DIBBS platform, and all interested small businesses must ensure full compliance with DoD standards and timely submission to be considered.

NUCLEAR REACTOR PROGRAM

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThis contract mandates strict compliance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313 for the identification, labeling, and documentation of hazardous materials. All substances must be properly labeled and accompanied by up-to-date Safety Data Sheets and radioactive material disclosures to ensure workplace safety and regulatory adherence. The work scope centers on precise handling procedures and thorough recordkeeping to maintain compliance across all operations involving hazardous substances. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 541620 indicating environmental consulting and related services. It was posted on July 20, 2026, and performance location details are not specified. The procurement is managed through the DIBBS platform with the contract identifier SPE4A626D5705, and no set-aside provisions or point of contact information are provided.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract titled Hazardous Materials Handling and Labeling requires the application of OSHA-compliant hazard warning labels and the preparation of Safety Data Sheets for any insulation blanket or packaging that contains hazardous materials. This subcontract, issued under NAICS code 541620 by the ASC COMMODITIES DIVISION within the Department of Defense, is focused on ensuring regulatory compliance for material safety documentation and labeling procedures. The work must be performed at the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with all deliverables needing to meet federal occupational safety standards. Any subcontractor engaging with this contract must be prepared to identify, classify, and document hazardous substances in accordance with OSHA regulations, ensuring proper communication of risks through standardized labeling and accessible Safety Data Sheets.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Handling and DocumentationThe contract requires strict adherence to OSHA’s Hazard Communication Standard for all hazardous materials involved in cabinet production or preservation processes, ensuring proper labeling, safety data sheets, and employee training are maintained throughout operations. The work is classified as a subcontract under NAICS code 541620 and is managed by the Department of Defense through its Medical Supply Chain FSH entity, with the place of performance located at APO 09227-0000. All activities must comply with federal safety regulations concerning the identification, handling, and documentation of hazardous substances to protect worker health and ensure regulatory compliance. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for submissions. There is no set-aside designation specified, and the contract does not include a point of contact, suggesting potential reliance on the DIBBS portal for correspondence. Contractors are expected to demonstrate robust systems for managing hazardous material documentation and safety protocols as part of their proposal, with full compliance mandatory for contract execution. The work is tied to military medical supply logistics, implying that any noncompliance could impact broader defense operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

Product Verification Testing (PVT) ServicesThe contract requires the execution of Product Verification Testing (PVT) to validate the performance and compliance of filter assemblies against the military specification MIL-S-901 and Procurement Note E05, ensuring these components meet stringent defense standards for reliability and durability under operational conditions. This work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for businesses certified by the Small Business Administration, with the North American Industry Classification System code 541380 indicating engineering and technical services. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. All testing activities are to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and interested parties must submit their responses through the DIBBS portal using the provided solicitation number SPE7L5026Q0157.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Labeling, and Marking (MIL-STD-129 & MIL-STD-2073-1E)The contract requires comprehensive military-compliant packaging, barcoding, and labeling of filter assemblies in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards for delivery to the Defense Logistics Agency. All work must adhere to federal military specifications for documentation, marking, and shipment readiness, ensuring full traceability and compliance throughout the supply chain. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is classified as a total small business set-aside under the SBA program, indicating exclusive eligibility for small businesses as defined by the Small Business Administration. The NAICS code 561910 indicates the nature of the work falls under Other Support Activities for Transportation, reflecting the logistical and packaging services required. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is structured as a subcontract opportunity managed by the Department of Defense under the Land Supplier Operations Engines organization. Bidders must be prepared to meet exacting military packaging and labeling requirements and must submit proposals via the DIBBS portal using the provided solicitation number SPE7L526Q0157.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance & CUI Protection (NIST SP 800-171)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard Covered Defense Information in full alignment with NIST SP 800-171 and DFARS 252.204-7012 requirements. This includes establishing, documenting, and continuously enforcing security measures across information systems to ensure the confidentiality, integrity, and availability of controlled unclassified information. Compliance must be maintained throughout the contract lifecycle with regular assessments, incident reporting, and remediation of identified vulnerabilities to meet federal defense standards. This is a small business set-aside subcontract under NAICS code 541512, exclusively available to small businesses as defined by the SBA. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with the contracting activity under the Department of Defense through LAND SUPPLIER OPNS ENGINES. All work must be executed in accordance with federal acquisition regulations and defense cybersecurity mandates, with no exceptions permitted for non-compliant practices or undocumented controls.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Supply Chain Traceability Documentation & ComplianceThe contract requires full supply chain traceability for all components used in filter assembly, ensuring strict adherence to DFARS regulations and military documentation standards. The contractor must maintain detailed, auditable records that trace every part from origin through final assembly, guaranteeing compliance with defense procurement requirements and enabling full transparency across the supply chain. This includes accurate labeling, serialization, and documentation of material sources, manufacturing processes, and quality control data to meet military-grade integrity expectations. This is a total small business set-aside under NAICS code 541611, specifically designated for small businesses by the SBA, with performance based in Tracy, California, 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026. It is structured as a subcontract under the Department of Defense's Land Supplier Operations Engines organization, with all documentation and compliance activities expected to align with federal defense supply chain protocols. Failure to meet traceability requirements will result in non-compliance and potential contract failure.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Fluid Filter Assemblies (NSN 2910-01-422-7809)The contract calls for the full manufacturing and assembly of seven fluid filter units per military specifications, encompassing every phase from design and fabrication to testing and comprehensive documentation, all requiring formal approval from government engineering sources. Performance of the work is centered in Tracy, California, with the final deliverables expected to meet stringent defense standards under the NSN 2910-01-422-7809. The effort falls under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA to promote small business participation in federal procurement, and is classified under the NAICS code 332996 for other fabricated metal product manufacturing. The opportunity is issued by the Department of Defense under the organizational name Land Supplier Opns Engines, with a response deadline of July 27, 2026, and was posted on July 20, 2026. Although the solicitation number is not listed, the contract is structured as a subcontract and is accessible via the DIBBS platform. No point of contact is provided in the data, indicating that all inquiries must be directed through the official procurement portal. The absence of specified city, state, or country in the office address suggests that the administrative office may be centralized, but the physical production and delivery must be completed at the designated performance location in Tracy.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

FILTER ASSEMBLY, FLUIDThe contract pertains to the procurement of seven fluid filter assemblies with NSN 2910-01-422-7809 under solicitation SPE7L5-26-Q-0157, which is a total small business set-aside classified under NAICS code 336390. Delivery is required within 525 days of award, and the place of performance is specified as Tracy, California, with Mary Rowley designated as the primary point of contact. The item is a restricted source requiring government engineering source approval, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory, incorporating all referenced R and I numbers. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplied hardware, except for specified functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. For non-origin equipment manufacturers, the offeror must submit comprehensive documentation per MIL-T-31000, including all manufacturing drawings and specifications, detailed process and operation sheets outlining critical procedures and inspection criteria, identification of all sources performing critical operations such as forgings and castings, and purchase order copies if available. A shock test extension report compliant with MIL-S-901 and formatted per DI-ENVR-80706 is also required. If original OEM drawings are unavailable, the offeror must provide an engineering analysis detailing how their design was derived, and if reverse engineering was employed, a full report of the methodology must be submitted, including sample counts, measurement techniques, all collected data, justifications for dimensional deviations, and acceptance rationale, to be forwarded to the engineering support activity for review. The solicitation is open for response until July 27, 2026, and all submissions must fully address these technical, quality, and compliance obligations.

Other Motor Vehicle Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

PUMP, FUEL, METERINGThe contract is for the procurement of ten fuel metering pumps with NSN 2910-01-688-5763 under solicitation SPE7L5-26-T-4527, issued by the Department of Defense through the Land Supplier Operations Engines organization. Deliveries are due within 156 days of award, and responses must be submitted by July 31, 2026. The item falls under NAICS code 336310 and is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons anywhere, including foreign nationals employed by U.S. companies or subsidiaries. Access to this controlled data requires prior approval from DLA, including valid US/Canada Joint Certification Program status, completion of DLA-specific training on export-controlled data handling, and successful submission of the DLA export-controlled data questionnaire. The contractor must also comply with DLA packaging guidelines, removal of government identification from non-accepted supplies, and applicable CMMC Level 2 cybersecurity requirements as a certified third-party assessment organization. All technical and quality specifications referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling unless amended. The primary point of contact is Mary Rowley, reachable via email and phone provided.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

Small Business Subcontracting and Accelerated Payment ComplianceThe contract seeks advisory services to ensure compliance with federal requirements governing small business subcontracting and accelerated payments to small business subcontractors under Department of Defense obligations. The work centers on providing expert guidance to uphold regulatory standards related to subcontracting plans, reporting obligations, and timely payment practices mandated for small business participants. The services must align with the NAICS code 541611, which classifies management consulting services, emphasizing strategic advisory functions specific to subcontracting compliance frameworks. Performance of the work is required in Phoenix, Arizona, with a response deadline of July 30, 2026, and the solicitation posted on July 19, 2026. While no specific set-aside designation is identified, the focus on small business subcontractors implies a strong emphasis on meeting federal small business participation goals. The contracting activity falls under the Land Supplier Operations Engineers organization within the Department of Defense, indicating this effort supports defense supply chain integrity and equitable economic opportunity for small businesses. Interested parties must respond through the designated DIBBS platform before the stated deadline to be considered for award.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

DLA Bid Submission and Compliance SupportThe contract requires support in preparing and submitting compliant bids through the DLA’s DIBBS system, with a focus on ensuring full alignment with federal acquisition regulations. This includes managing SAM.gov registration and compiling all necessary FAR and DFARS documentation to meet federal contracting requirements. The work is classified as a subcontract under NAICS code 541211, which categorizes it within professional, scientific, and technical services. Performance is designated to occur in Phoenix, Arizona, with a zip code of 85043, indicating the operational focus of the task. The solicitation was posted on July 19, 2026, and the response deadline is set for July 30, 2026. The contracting activity is managed by the Department of Defense under the organization Land Supplier Opns Engines, underscoring its defense-related nature. All submissions must be made through the official DIBBS platform, and bidders are expected to have established experience with federal bid processes, documentation rigor, and compliance frameworks. There is no specified set-aside classification, meaning the opportunity is open to all qualified entities, and successful performance hinges on accuracy, timeliness, and adherence to all regulatory standards outlined by the DLA.

Offices of Certified Public Accountants

POSTED

DEADLINE

Hazardous Material Labeling and Compliance ServicesThe contract calls for the provision of hazard communication labels and full compliance support for packaging to meet OSHA and DFARS standards, ensuring that all hazardous materials are properly labeled and documented in accordance with federal regulations. This subcontract is specifically scoped to support safe handling, storage, and transportation of hazardous substances through accurate, compliant labeling systems and ongoing regulatory adherence. The work must be performed at the designated place of performance in Phoenix, Arizona, with a zip code of 85043, and the contractor is expected to deliver services that align with the North American Industry Classification System code 541690, which covers other scientific and technical consulting services. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, and the contracting office is under the Department of Defense through LAND SUPPLIER OPNS ENGINES, indicating a defense-related procurement requirement.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Leaf Spring Manufacturing and SupplyThe contract entails the manufacture and supply of 196 leaf springs designated by NSN 5360011190798, all of which must fully comply with applicable military specifications and delivery standards. The work is being procured as a subcontract under the Department of Defense, specifically managed by LAND SUPPLIER OPNS ENGINES, with performance required to be completed at a location in Phoenix, Arizona, zip code 85043. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026, with the NAICS code 332999 indicating the procurement falls under other fabricated metal product manufacturing. All components must meet stringent quality and technical requirements to ensure compatibility and reliability in military applications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Product Verification Testing (PVT) Sample ManagementThe contract calls for the management and submission of Product Verification Testing (PVT) samples to ensure compliance with government requirements before initiating full-scale production. This includes coordinating all logistics related to sample preparation, transportation, and documentation to meet regulatory timelines and standards. The work must be executed with precision to facilitate timely government approval, requiring thorough attention to detail in recordkeeping and communication throughout the verification process. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The solicitation is administered by the Department of Defense under the agency name LAND SUPPLIER OPNS ENGINES, with performance centered in Tracy, California, at the ZIP code 95304-5000. The North American Industry Classification System code is 541380, indicating the work falls under other scientific and technical consulting services. The posting date is July 19, 2026, with a strict response deadline of July 30, 2026. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE