Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling Services

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with OSHA Hazard Communication standards and MIL-STD-129 for the handling, labeling, and documentation of hazardous materials, with a focus on generating accurate Safety Data Sheets and applying proper hazard labeling in accordance with federal regulations. This subcontract is scoped to ensure all hazardous substances are properly identified, categorized, and marked throughout the supply chain, supporting safe handling and regulatory alignment across Department of Defense operations. The solicitation is open for responses until August 3, 2026, under the NAICS code 541690 for other scientific and technical consulting services, and is issued by the Department of Defense through its Construction and Equipment Manu & Con division. The performance location and specific point of contact are not detailed, but the work is expected to support defense-related logistics and material management efforts, with all deliverables must meet strict federal compliance thresholds for hazard communication and packaging standards.

General Info

Comply with OSHA and MIL-STD-129 for hazardous material labeling, SDS, and DoD logistics by August 3, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure OSHA HAZCOM and MIL-STD-129 compliance for hazardous materials, including SDS generation and hazard labeling.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires strict adherence to OSHA’s Hazard Communication Standard and Federal Standard No. 313 to ensure proper hazard communication for all supplied materials. This includes the accurate generation and timely provision of Safety Data Sheets (SDS) and compliant labeling for hazardous substances, ensuring that all downstream users receive the necessary safety information in accordance with federal regulations. The supplier must maintain full documentation and verification processes to demonstrate ongoing compliance throughout the term of the agreement. This is a subcontract under the Department of Defense’s ASC Commodities Division, solicited under NAICS code 541690 for other scientific and technical consulting services. The opportunity was posted on July 28, 2026, with a deadline for responses set for August 3, 2026. While specific performance locations and contact details are not provided, the requirement is centered on delivering compliant hazard communication materials that meet federal safety standards, with no set-aside designation specified. All submissions must align with the regulatory expectations outlined in the solicitation and be submitted via the designated DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

MEDICAL ETHICS CONSULTING AND PROGRAM SERVICESThe contract for Medical Ethics Consulting and Program Services requires the vendor to support Catawba Hospital’s ethics committee by attending up to four meetings annually and providing continuous assistance in developing procedures, maintaining quality standards, and delivering training and education to committee members. The vendor serves as a subject matter expert in medical ethics, conducting literature searches, recommending library resources, and aiding in the development, review, and integration of institutional policies. They are responsible for identifying ethical policy issues that warrant state-level advocacy and leading all case consultations, including making additional on-site visits as needed. Written reports, including position and consultation papers, must be provided to help resolve complex cases and policy dilemmas. In addition, the vendor is expected to deliver up to four educational sessions for hospital staff each year, scheduled to coincide with ethics committee meetings, ensuring broader ethical literacy across the organization. The contract is issued by Virginia’s Catawba Hospital through solicitation QQ-125159, with responses due by July 31, 2026, and point of contact is Robyn Wright.

Catawba Hospital

POSTED

about 14 hours ago

DEADLINE

Data Analysis & Donor ModelingThe contract seeks to leverage historical giving data through advanced analytical methods and predictive modeling to identify and segment donor populations, enabling more strategic and targeted fundraising campaigns. The primary objective is to enhance donor engagement by providing actionable insights that guide gift officer assignments and optimize campaign planning based on predictive outcomes. This work will support Northeast Ohio Medical University’s fundraising efforts by transforming data into strategic tools that improve donor retention, acquisition, and gift size forecasting. The solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is open for responses until August 11, 2026. The contract is issued by Northeast Ohio Medical University in Ohio, with no specific place of performance or point of contact provided. The award will likely go to a vendor with demonstrated expertise in donor analytics, statistical modeling, and nonprofit fundraising optimization, with the expectation that deliverables will directly influence institutional fundraising priorities and operational efficiency.

Northeast Ohio Medical University

POSTED

about 14 hours ago

DEADLINE

Quality Assurance & Nonconformance ReportingThe contract requires the implementation of comprehensive quality control processes to inspect all delivered goods and verify strict conformance to agreed-upon technical specifications. All nonconforming items must be identified, documented, and reported in accordance with FAR 52.246-26, ensuring transparency and accountability in the acceptance or rejection of materials. The scope centers on maintaining rigorous standards throughout the delivery and inspection lifecycle to safeguard the integrity of work performed under the Department of Energy’s oversight. This subcontract is administered by ORNL UT-Battelle LLC, a Department of Energy contractor, with performance required at Oak Ridge, Tennessee, 37830. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, at 8:00 PM Eastern Time. Failure to comply with the prescribed quality assurance protocols or reporting procedures could result in rejection of deliverables and potential contractual consequences.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 16 hours ago

DEADLINE

Technical Documentation and ROM Cost Estimation SupportThe contract supports the compilation of technical documentation, evaluation matrices, and Rough Order of Magnitude cost estimates for various lens design options under a Small Business Set-Aside designation, ensuring participation exclusively by qualified small businesses. Work is tied to the NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The effort is focused on providing preliminary analysis and cost projections to inform decision-making for optical system development, with deliverables requiring technical precision and adherence to industry standards for estimation and documentation. The opportunity was posted on July 28, 2026, with a response deadline of July 29, 2026, indicating a highly time-sensitive procurement process. Although specific performance location details are not provided, the work is likely to be conducted remotely or at the contractor’s facility, as no place of performance is specified. The contract type is a subcontract, suggesting it supports a larger project within NASA’s technical infrastructure, and the lack of a point of contact or agency office address implies communication and submission will be handled through the official SAM.gov portal linked for the opportunity.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

in about 17 hours

Export Control Compliance & Technical Data ManagementThe contract requires strict adherence to International Traffic in Arms Regulations and Export Administration Regulations for the handling of controlled technical data, ensuring all applicable export control requirements are met. This includes obtaining and managing necessary export licenses when transferring controlled information to foreign persons or entities, as well as implementing robust access restrictions to prevent unauthorized disclosure. The work involves comprehensive technical data management practices to safeguard sensitive information throughout its lifecycle, with a focus on compliance, documentation, and internal control measures. This is a small business set-aside subcontract under the NAICS code 541690, awarded by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026. Participation is limited to small businesses as defined by the SBA, and the performance location is not specified. The contract demands a high level of precision in export control compliance and technical data governance to support national security and regulatory obligations.

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

Actuarial Costing and Return on Investment Analysis for the Modernization of the Federal Workers’ Compensation RegimeEmployment and Social Development Canada is seeking a qualified Supply Arrangement Holder under E60ZT-18TSPS, specifically those in Tier 1 for Remote Work/Virtual delivery, with expertise in Stream 3, Category 3.8 – Financial Specialist, to conduct an independent actuarial costing analysis of the federal workers’ compensation regime. The analysis must evaluate the short-, medium-, and long-term direct and indirect costs under three scenarios: maintaining the current regime and implementing each of two proposed modernization options. The study must break down costs for the five federal employers with the highest claim volumes and a selected group of those with moderate claim volumes, while also calculating the return on investment for each modernization path. The contract is expected to span ten months from the award date, requiring approximately 220 days of effort, and will result in the award of a single contract. All work is to be performed remotely. The solicitation, numbered 100032367, was published on July 28, 2026, with responses due by August 26, 2026, and is managed by Contracting Authority Joshua De Sousa, reachable at nc-solicitations-gd@hrsdc-rhdcc.gc.ca.

Department of Employment and Social Development

POSTED

about 23 hours ago

DEADLINE

Safety Plan ImplementationThe contract titled Safety Plan Implementation requires the development and enforcement of a comprehensive site safety plan that adheres to all applicable OSHA and state safety regulations. This subcontract is issued by the state of Utah and is focused on ensuring safe working conditions through the establishment of structured safety protocols, training procedures, and ongoing compliance monitoring. The solicitation was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541690, which covers other scientific and technical consulting services. There is no specified set-aside type or place of performance details, indicating the scope may apply broadly across Utah state-regulated worksites. The contract does not list a point of contact, and all submissions must be made through the provided Utah BonfireHub portal.

POSTED

DEADLINE

Energy Data Management & Usage AnalyticsThe contract pertains to the comprehensive management and analysis of electricity usage data across all Texas Department of Transportation facilities, encompassing the collection, interpretation, and reporting of energy consumption patterns. The scope includes demand forecasting to anticipate future energy needs, detailed cost tracking to monitor operational expenses, and advanced anomaly detection to identify irregular usage that may indicate inefficiencies or equipment malfunctions. The contractor will be responsible for delivering actionable insights derived from energy data to support informed decision-making and resource optimization across TxDOT’s statewide infrastructure. The opportunity is classified as a subcontract under NAICS code 541690, indicating it falls within other scientific and technical consulting services, and is open for responses through TxDOT’s procurement portal. The solicitation was posted on July 27, 2026, with a deadline for submissions set for August 26, 2026. While the place of performance and point of contact details are unspecified, the work is expected to support TxDOT’s operations throughout the state of Texas. The contract does not designate a specific set-aside status, and all eligible vendors may compete for award based on technical capability and cost-effectiveness.

Texas Department of Transportation

POSTED

DEADLINE

ENV20260727 - Statewide Cultural ResourcesThe Virginia Department of Transportation is inviting multi-disciplinary cultural resource consulting firms to submit expressions of interest for a statewide on-call contract to deliver a range of cultural resource services, including archaeological and architectural surveys, cultural resource assessments, and related evaluations. This fixed billable rate contract has a maximum value of $3,000,000 per term and is open to qualified firms capable of supporting VDOT’s needs across the entire Commonwealth. All solicitation details, including submission instructions and required documentation, are accessible through the BidExpress portal, where registration is mandatory for participation but carries no fee. Inquiries must be submitted exclusively via the BidExpress Q&A section, ensuring transparency as all responses are made available to all potential offerors. Any updates, addenda, or changes to the solicitation will be published on the same portal under the designated solicitation number RFP-125083. The expression of interest deadline is 2:00 p.m. on August 17, 2026. VDOT is committed to full compliance with Title VI requirements, ensuring nondiscrimination in all aspects of the procurement process. The point of contact for questions is Dillon Smith, reachable via email or phone as listed in the contract data.

Virginia Department of Transportation

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires strict adherence to hazard warning labeling protocols for any impeller or packaging containing hazardous or radioactive materials, as mandated by OSHA 29 CFR 1910.1200 and MIL-STD-129. All applicable substances must be clearly identified with standardized labels to ensure safe handling, storage, and transport, with compliance being non-negotiable throughout the production and delivery process. Any occurrence of radioactive materials exceeding established regulatory thresholds must be immediately reported to the Contracting Officer to facilitate appropriate oversight and mitigation. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 541690 and places performance at Norfolk, Virginia, with a tight response deadline of July 30, 2026. The requirement underscores the critical importance of regulatory compliance in defense-related supply chains, where mislabeling or failure to alert authorities could pose significant safety and legal risks. Participation necessitates a thorough understanding of federal hazardous materials standards and the ability to implement precise labeling procedures in alignment with military and workplace safety regulations.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

FRAME, JACK CASTERThe item is a frame jack caster specified under NSN 1730-00-308-3870 with a quantity of two units, subject to a solicitation issued by the Defense Logistics Agency under number SPE8EF-26-Q-0153. The technical requirements mandate compliance with specific material standards: ASTM A108 Grade 1020 I/L/O QQ-S-637 and QQ-S-634 for the base material, ASTM A27/A27M Grade 60-30 Class 1 I/L/O QQ-S-681 Class 1 for castings, and ASTM B633 Type 3 SC4 I/L/O QQ-Z-325 for surface coating, with welding performed in accordance with SAE AMS-STD-2219. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item is subject to export controls under ITAR or EAR, restricting disclosure of technical data to foreign persons unless authorized by the Department of State or Commerce, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. Packaging must conform to DLA requirements, and all items require physical identification per RQ017, with government identification removed from non-accepted supplies. The solicitation has a response deadline of August 7, 2026, with delivery due within 60 days after award, and cybersecurity compliance is mandated at CMMC Level 2. The point of contact for the procurement is Raymond Horn of the Department of Defense’s Construction and Equipment Manufacturing and Construction agency.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

FILTER BODY, FLUIDThe contract specifies the procurement of one unit of a filter body for fluid purification, identified by NSN 2940-00-454-8099 and purchase request 7017498209, with a required delivery within ten days of order placement. Delivery is FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and be labeled according to MIL-STD-129, with palletization following DLA’s RP001 packaging standards; all technical and quality requirements from the DLA Master List take precedence over ASTM standards. The shipment must be sent via the fastest traceable means, excluding parcel post, to Fort Campbell, Kentucky, with the marking and freight address listed as W34XC5, W6YD USALRCTR FT CAMPBELL, Building 5207, 8th Street and Desert Storm Ave. The required delivery date is July 17, 2026, and the contract number is SPE8EE-26-T-2185. The item is covered under defense information protocols and must be handled with appropriate security. The unit of issue is each, with a QUP of one, and the contract includes specific government use identifiers and project codes for tracking and accountability.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

GROOVE CLEANER-MECHThe contract pertains to the procurement of GROOVE CLEANER-MECH with NSN 4930-01-462-1175, requiring a firm fixed price for a quantity of 2 kilotons with no variance allowed in shipment quantity. Delivery is mandated within 90 days after order date, with FOB origin and acceptance occurring at destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specified methods for preservation, wrapping, and cushioning, with marking adhering to MIL-STD-129 and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exceptions such as functional uses in batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents, where shock-proof containment with a secondary barrier is required per NAVSEA 5100-003D. Shipment must be sent by the fastest traceable means and explicitly exclude parcel post, with the freight destination listed as USNS JOSHUA HUMPHREYS, FPO AE 09573. The contract references technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The vendor is KIRKPATRICK GROUP INC of Dallas, TX, and all government correspondence must use the designated VSM code and tracking identifiers. The estimated delivery date is May 15, 2026, and the procurement is linked to Purchase Request 7016833062 under solicitation SPE8EE-26-Q-0408.

POSTED

about 11 hours ago

DEADLINE

ADAPTER KIT, HOISTINThe contract is for a single unit of an Adapter Kit, Hoistin, identified by NSN 3940-01-693-3897 and part number 6080781-701 from Curtiss-Wright Electro-Mechanical Corp, under solicitation SPE8EE-26-Q-0407. The agreement is a Firm Fixed Price contract with no variance allowed in quantity, requiring delivery within 175 days after award date. Inspection and acceptance both occur at the destination, with FOB origin terms applying. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, using specified materials, methods, and labeling per MIL-STD-129 without special markings. The item is to be shipped to USS GERALD R FORD CVN 78 at FPO AE 09523, with transportation governed by DLAD PROC NOTE C19 and C20. The solicitation is a Total Small Business Set-Aside, and technical and quality requirements referenced in the DLA Master List are incorporated by reference. Pricing and unit details are specified, with the government’s point of contact being Robert Guerra, and the material need date is October 5, 2023.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 11 hours ago

DEADLINE

MASTER CONTROL ASSEMBLThe contract pertains to the procurement of two units of the Master Control Assembly, Hydraulic, identified by NSN 3895-01-226-6156, under solicitation SPE8EE-26-Q-0409, with a required delivery within 90 days of award. The item is subject to stringent technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except where functionally necessary in specified applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; in such cases, portable devices must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all packaging must comply with DLA packaging requirements. The solicitation was posted on July 28, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense under the Construction & Equipment Manu & Con organization, with Chase Quigley designated as the primary point of contact.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance (CUI Protection)The contract requires the implementation of NIST SP 800-171 controls to protect covered defense information and ensure full compliance with DFARS 252.204-7012, specifically for safeguarding controlled unclassified information and fulfilling cyber incident reporting obligations. The subcontractor must establish a robust cybersecurity framework aligned with these standards to secure sensitive data handled under the Department of Defense’s requirements, including technical, administrative, and physical safeguards across systems and networks. Ongoing monitoring, assessment, and timely reporting of any cyber incidents involving covered defense information are mandatory to maintain compliance. This subcontract is classified under NAICS code 541512 and is solicited by the Department of Defense under the organizational name CONSTRUCTION & EQUIPMENT MANU & CON. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. The place of performance and specific location details are not provided, but the work will support defense-related cybersecurity initiatives. The contract is not subject to any set-aside requirements, and all responses must be submitted through the designated DIBBS portal by the deadline to be considered.

Computer Systems Design Services

POSTED

DEADLINE

Supply of Commercial Hardware III (FCEB) UnitsThe contract calls for the procurement and delivery of eight units of Commercial Hardware III (CLN2001-BK), with strict adherence to military packaging, labeling, and hazardous materials handling standards. All items must meet the rigorous requirements set forth for defense-grade logistics, ensuring safe transport, proper identification, and regulatory compliance throughout the supply chain. The solicitation is structured as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment Manuf & Con organization, and falls under NAICS code 332312, which pertains to other fabricated metal product manufacturing. The opportunity was posted on July 27, 2026, with responses due by August 3, 2026, providing a seven-day window for interested parties to submit proposals. While no specific place of performance or point of contact is listed, the contract is accessible via the DIBBS platform for detailed submission guidelines. Although no set-aside designation is specified, the nature of the requirement and its alignment with Department of Defense logistics suggest it is intended for suppliers with proven capability in military-grade hardware delivery and hazardous materials compliance.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Hazard Communication and Safety Data Sheet (SDS) ManagementThe contract requires the preparation and submission of Safety Data Sheets and hazard labels for hazardous materials, ensuring full compliance with OSHA’s Hazard Communication Standard and MIL-STD-129 labeling requirements. This is a HUBZone set-aside subcontract under NAICS code 541620, meaning only qualified small businesses located in HUBZone areas are eligible to respond. The work involves accurate documentation and labeling to meet federal safety and regulatory standards for hazardous substances, likely in support of Department of Defense supply chain operations. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 27, 2026, and responses are due by August 7, 2026. The contracting activity falls under the Department of Defense’s Construction & Equipment Manufacturing and Construction organization, indicating the work supports military logistics or equipment procurement. While no specific point of contact is listed, the contract can be accessed through the DIBBS portal using the provided link. The nature of the work demands precision in hazard communication to ensure safe handling, storage, and transport of materials across military and contractor facilities.

Environmental Consulting Services

POSTED

DEADLINE

Export Control and Technical Data Compliance SupportThe contract supports compliance with ITAR and EAR regulations for technical data associated with defense-related activities, requiring robust access controls, comprehensive training programs, detailed documentation practices, and full audit readiness to meet DFARS requirements. The work is focused on ensuring that controlled technical information is managed in accordance with U.S. export control laws to prevent unauthorized access or dissemination, with an emphasis on maintaining strict internal controls and documentation trails that satisfy federal scrutiny. This subcontract is set aside for HUBZone-certified small businesses under NAICS code 541611, reflecting a prioritization of economic development in historically underutilized business zones. The place of performance is designated as New Cumberland, PA, with a response deadline of August 7, 2026, and the solicitation was posted on July 27, 2026. The contracting entity falls under the Department of Defense, specifically associated with the Construction & Equipment Manu & Con organization, indicating that the compliance services will directly support defense manufacturing or equipment-related programs requiring rigorous export control adherence.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Domestic and International Logistics and TransportationThe contract entails the domestic and international logistics and transportation of regulated military hardware from the manufacturer to the DLA Distribution facility in New Cumberland, Pennsylvania, with strict adherence to hazardous materials regulations throughout the supply chain. All transportation must comply with federal and international standards for handling dangerous goods, and U.S.-flagged vessels are mandated when international shipping is required to ensure compliance with U.S. maritime laws and security protocols. The effort is classified as a subcontract under the HUBZone Set-Aside program, which prioritizes contracting with businesses located in historically underutilized business zones to promote economic development in disadvantaged areas. The North American Industry Classification System code 488510 identifies the work as support activities for transportation, indicating specialized logistical expertise is required to manage the movement of sensitive military equipment. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and the performance location is fixed at the DLA Distribution Center in New Cumberland, Pennsylvania, with no flexibility in destination.

Freight Transportation Arrangement

POSTED

DEADLINE

Packaging, Marking, and Labeling of Military ShipmentsThe contract requires compliant packaging, marking, and labeling of bomb skid adapters in accordance with MIL-STD-129, ASTM D3951, and UCC-128/Data Matrix barcode standards, ensuring full adherence to military logistics and identification protocols. All work must meet stringent defense department specifications for durability, traceability, and uniformity in shipment preparation, with specific emphasis on accurate barcoding and labeling for seamless integration into military supply chains. The performance location is in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work is classified as a HUBZone Set-Aside subcontract, targeting qualified small businesses located in historically underutilized business zones. The NAICS code 561910 indicates the contract falls under Other Support Activities for Transportation, aligning with specialized logistics and packaging services. The opportunity was posted on July 27, 2026, with a response deadline of August 7, 2026, and is managed by the Department of Defense under the organization title Construction & Equipment Manu & Con. The solicitation is issued through the DIBBS system with the reference number SPE8EF26T1517, and bidders are expected to demonstrate proven experience in military-grade packaging and labeling processes. There is no specified point of contact in the data, and all inquiries must follow the official DIBBS portal guidelines. Compliance with all referenced standards is mandatory, and failure to meet these requirements will result in rejection of proposals.

Packaging and Labeling Services

POSTED

DEADLINE

Precision Machining of Bomb Skid AdaptersThe contract involves the manufacture of 26 precision-machined bomb skid adapters with the National Stock Number 1730-00-719-9516, all constructed to meet rigorous military specifications and defense technical data standards. Quality control measures are mandatory throughout production to ensure compliance with required performance, dimensional, and material criteria essential for operational use in defense systems. The work is designated as a subcontract under a HUBZone Set-Aside, meaning only qualified small businesses located in historically underutilized business zones are eligible to bid, promoting economic development in disadvantaged areas. The North American Industry Classification System code 332721 identifies the work as related to forgings and stampings, indicating the nature of the manufacturing processes involved. The performance location is firmly established in New Cumberland, Pennsylvania, with a zip code of 17070-5002, requiring the contractor to operate or deliver from within this designated area. The solicitation was posted on July 27, 2026, and responses must be submitted by August 7, 2026, creating a limited window for qualification and proposal submission. The contract is managed under the Department of Defense through its Construction and Equipment Manufacturing and Construction division, underscoring the critical defense nature of the components being produced.

Precision Turned Product Manufacturing

POSTED

DEADLINE