Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Compliance & Labeling Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
RFQ6082 Noise Compliance & Air Quality Testing Services
Solicitation # RFQ6082
Management & Training Corporation (MTC) is soliciting bids for a subcontracting opportunity to provide industrial hygienist services at the San Diego Job Corps Center in Imperial Beach, California. The scope of work requires the contractor to conduct full-day air quality monitoring and occupational noise compliance audits specifically for Building 13, which houses hard-trades shops, and Building 225A, the welding shop. The contractor must evaluate air quality against OSHA, ACGIH, and EPA standards, focusing on ventilation, combustion gases, VOCs, welding fumes, and particulate matter. Additionally, the contractor must perform noise compliance audits to ensure adherence to OSHA 29 CFR 1910.95 thresholds using ANSI-standard instrumentation. Deliverables include a comprehensive Air Quality Compliance Report and a Noise Compliance Report, both submitted in PDF format via email. Bids must be submitted as a lump sum fee by September 16, 2026, at 3:00 PM PST. To be considered for the award, applicants must provide a bid sheet, proof of insurance, and a completed supplier packet including a W-9 and self-certification form. The opportunity is open to various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 541690. Award decisions will be based on the best value as determined by MTC. The contract requires compliance with Service Contract Labor Standards and Wage Determination 2015-5635 Rev 29. Invoicing is to be submitted on a weekly or bi-weekly basis, and the contractor must adhere to strict government and DOL guidelines regarding the protection of sensitive and proprietary information.
San Diego Job Corps Center

POSTED

about 12 hours ago

DEADLINE

in 5 days
NAICS: 541690
New
Federal
VA Magnetic Resonance Safety Expert Services
Solicitation # 36C24C26Q0022
Rpo Central (36C24C)

POSTED

about 16 hours ago

DEADLINE

in 9 days
NAICS: 541690
New
Federal
DoW/DoN Technology Transfer Program Management Support
Solicitation # N0001426RFI7005
Office Of Naval Research

POSTED

about 16 hours ago

DEADLINE

in 14 days
NAICS: 541690
New
SLED
PII Security and Cloud Compliance Management
Social Services Agency

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541690
New
SLED
Digital Accessibility Testing and Interoperability Services
OSD03 - OSD - Category Management

POSTED

1 day ago

DEADLINE

in about 2 months
NAICS: 541690
New
SLED
Fire Service Subject Matter Expert (SME) Consulting
Human Resources

POSTED

1 day ago

DEADLINE

in 24 days
NAICS: 541690
New
SLED
Healthcare Data Analysis & Performance Reporting
MS DEPT of MENTAL HEALTH

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541690
New
SLED
Energy Market Analyst / Power Procurement Specialist
DAS Procurement

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541690
New
Federal
Data Analytics & Remediation Services
Commander

POSTED

1 day ago

DEADLINE

in 18 days
NAICS: 541690
New
Federal
Technical Assistance and Research Support Services
USDA Ars Afm Apd

POSTED

1 day ago

DEADLINE

in 10 days
NAICS: 541690
New
Federal
Senior Physician Subject Matter Expert (SME) - Pharmacovigilance
FDA Office Of Acq Grant Svcs

POSTED

1 day ago

DEADLINE

in 7 days
NAICS: 541690
New
Federal
Systems Engineering Requirements Management (DOORS)
Nswc Dahlgren

POSTED

1 day ago

DEADLINE

in 5 days

AI Contract Overview

Show more

The contract pertains to providing hazard communication labeling and Material Safety Data Sheets (MSDS) for the synchro clamp, specifically if the product contains hazardous materials such as coatings or lubricants. The primary focus is ensuring compliance with hazardous materials regulations by accurately labeling and documenting any potentially dangerous substances associated with the synchro clamp. This service will support safety and regulatory adherence for the product's handling and use. Issued by the Defense Logistics Agency under the Department of Defense, this subcontract opportunity is classified under NAICS code 541690, which relates to specialized services. The solicitation was posted on May 28, 2026, with responses due by June 5, 2026. While specific location details for performance or points of contact are not provided, the contract emphasizes the importance of hazardous materials compliance within the defense supply chain. Interested parties are directed to the agency's procurement platform for additional details and submission instructions.

General Info

Provide hazard communication labeling and MSDS for synchro clamp hazardous materials compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-193M.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLAMP, SYNCHRO

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide hazard communication labeling and MSDS for the synchro clamp if it contains hazardous materials such as coatings or lubricants.

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 561910
New
DIBBS
Military-Grade Packaging and Palletization Services
Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Supply of Uninterruptible Power Supplies (UPS)
Motor and Generator Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2418
This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.
Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, STORAGE
Solicitation # SPE7L7-26-Q-2419
This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.
Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Solicitation # SPE7L7-26-Q-2417
This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Battery Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
LIMITER, RADIO FREQU
Solicitation # SPE4A7-26-Q-1069
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.
Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 4 days
View Details
NAICS: 315250
New
DIBBS
COVERALLS, ANTI-EXPO
Solicitation # SPE1C1-26-Q-0498
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.
Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
GOVERNMENT FIT VERIFIC
Solicitation # SPE7L3-26-Q-1328
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.
Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

in 17 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-26-Q-2372
Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423610
New
DIBBS
Supply of Storage Batteries (NSN 6140-01-713-7559)
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335910
New
DIBBS
61--BATTERY,STORAGE
Solicitation # SPE7L7-26-T-5218
The Defense Logistics Agency, through DLA Land and Maritime, has issued solicitation SPE7L7-26-T-5218 as a Request for Quotations for three storage batteries, identified by NSN 6140017137559. This procurement is a total small business set-aside under NAICS 335910, with a response deadline of September 21, 2026. The required hardware must meet the specifications for East Penn Manufacturing Co. part number 18-G75-21EE IST6G08-NAV1 and is designated as a critical application item. The items have a non-extendable shelf life of 12 months and must be delivered to NAVSUP FLC Yokosuka in Japan within 20 days after receipt of order. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific labeling requirements for hazardous materials per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. All quotes must be submitted electronically via the DIBBS system. The award process may utilize automated award and incorporates the HUBZone price evaluation preference. Compliance with various FAR and DFARS clauses is required, including those regarding cybersecurity safeguarding, the Berry Amendment, and the Buy American Act. Invoicing and payment must be processed through the Wide Area Workflow system.
Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333310
New
DIBBS
46--MODIFICATION KIT,WATER
Solicitation # SPE8E8-26-T-5568
Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS