Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Labeling

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

All hazardous materials used in or shipped with the product must strictly comply with OSHA’s Hazard Communication Standard and DFARS labeling requirements, ensuring full alignment with the Globally Harmonized System of Classification and Labeling of Chemicals. This includes providing accurate, up-to-date Safety Data Sheets that meet GHS specifications and affixing appropriate hazard labels that clearly communicate chemical risks, precautionary measures, and emergency response information. Compliance is mandatory throughout the supply chain to ensure safe handling, transportation, and use of all regulated substances. The subcontract is issued by the Fluid Handling Division under the Department of Defense, with a solicitation closing on August 3, 2026, and applies to work classified under NAICS code 541690.

General Info

All hazardous materials must comply with OSHA, DFARS, and GHS standards with proper labels and Safety Data Sheets.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure hazardous materials used in or shipped with the product comply with OSHA HazCom and DFARS labeling requirements, including GHS-compliant SDS and hazard labels.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires strict adherence to OSHA’s Hazard Communication Standard and Federal Standard No. 313 to ensure proper hazard communication for all supplied materials. This includes the accurate generation and timely provision of Safety Data Sheets (SDS) and compliant labeling for hazardous substances, ensuring that all downstream users receive the necessary safety information in accordance with federal regulations. The supplier must maintain full documentation and verification processes to demonstrate ongoing compliance throughout the term of the agreement. This is a subcontract under the Department of Defense’s ASC Commodities Division, solicited under NAICS code 541690 for other scientific and technical consulting services. The opportunity was posted on July 28, 2026, with a deadline for responses set for August 3, 2026. While specific performance locations and contact details are not provided, the requirement is centered on delivering compliant hazard communication materials that meet federal safety standards, with no set-aside designation specified. All submissions must align with the regulatory expectations outlined in the solicitation and be submitted via the designated DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

MEDICAL ETHICS CONSULTING AND PROGRAM SERVICESThe contract for Medical Ethics Consulting and Program Services requires the vendor to support Catawba Hospital’s ethics committee by attending up to four meetings annually and providing continuous assistance in developing procedures, maintaining quality standards, and delivering training and education to committee members. The vendor serves as a subject matter expert in medical ethics, conducting literature searches, recommending library resources, and aiding in the development, review, and integration of institutional policies. They are responsible for identifying ethical policy issues that warrant state-level advocacy and leading all case consultations, including making additional on-site visits as needed. Written reports, including position and consultation papers, must be provided to help resolve complex cases and policy dilemmas. In addition, the vendor is expected to deliver up to four educational sessions for hospital staff each year, scheduled to coincide with ethics committee meetings, ensuring broader ethical literacy across the organization. The contract is issued by Virginia’s Catawba Hospital through solicitation QQ-125159, with responses due by July 31, 2026, and point of contact is Robyn Wright.

Catawba Hospital

POSTED

about 13 hours ago

DEADLINE

Data Analysis & Donor ModelingThe contract seeks to leverage historical giving data through advanced analytical methods and predictive modeling to identify and segment donor populations, enabling more strategic and targeted fundraising campaigns. The primary objective is to enhance donor engagement by providing actionable insights that guide gift officer assignments and optimize campaign planning based on predictive outcomes. This work will support Northeast Ohio Medical University’s fundraising efforts by transforming data into strategic tools that improve donor retention, acquisition, and gift size forecasting. The solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is open for responses until August 11, 2026. The contract is issued by Northeast Ohio Medical University in Ohio, with no specific place of performance or point of contact provided. The award will likely go to a vendor with demonstrated expertise in donor analytics, statistical modeling, and nonprofit fundraising optimization, with the expectation that deliverables will directly influence institutional fundraising priorities and operational efficiency.

Northeast Ohio Medical University

POSTED

about 13 hours ago

DEADLINE

Quality Assurance & Nonconformance ReportingThe contract requires the implementation of comprehensive quality control processes to inspect all delivered goods and verify strict conformance to agreed-upon technical specifications. All nonconforming items must be identified, documented, and reported in accordance with FAR 52.246-26, ensuring transparency and accountability in the acceptance or rejection of materials. The scope centers on maintaining rigorous standards throughout the delivery and inspection lifecycle to safeguard the integrity of work performed under the Department of Energy’s oversight. This subcontract is administered by ORNL UT-Battelle LLC, a Department of Energy contractor, with performance required at Oak Ridge, Tennessee, 37830. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, at 8:00 PM Eastern Time. Failure to comply with the prescribed quality assurance protocols or reporting procedures could result in rejection of deliverables and potential contractual consequences.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 15 hours ago

DEADLINE

Technical Documentation and ROM Cost Estimation SupportThe contract supports the compilation of technical documentation, evaluation matrices, and Rough Order of Magnitude cost estimates for various lens design options under a Small Business Set-Aside designation, ensuring participation exclusively by qualified small businesses. Work is tied to the NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The effort is focused on providing preliminary analysis and cost projections to inform decision-making for optical system development, with deliverables requiring technical precision and adherence to industry standards for estimation and documentation. The opportunity was posted on July 28, 2026, with a response deadline of July 29, 2026, indicating a highly time-sensitive procurement process. Although specific performance location details are not provided, the work is likely to be conducted remotely or at the contractor’s facility, as no place of performance is specified. The contract type is a subcontract, suggesting it supports a larger project within NASA’s technical infrastructure, and the lack of a point of contact or agency office address implies communication and submission will be handled through the official SAM.gov portal linked for the opportunity.

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

in about 18 hours

Export Control Compliance & Technical Data ManagementThe contract requires strict adherence to International Traffic in Arms Regulations and Export Administration Regulations for the handling of controlled technical data, ensuring all applicable export control requirements are met. This includes obtaining and managing necessary export licenses when transferring controlled information to foreign persons or entities, as well as implementing robust access restrictions to prevent unauthorized disclosure. The work involves comprehensive technical data management practices to safeguard sensitive information throughout its lifecycle, with a focus on compliance, documentation, and internal control measures. This is a small business set-aside subcontract under the NAICS code 541690, awarded by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026. Participation is limited to small businesses as defined by the SBA, and the performance location is not specified. The contract demands a high level of precision in export control compliance and technical data governance to support national security and regulatory obligations.

NASA Shared Services Center

POSTED

about 15 hours ago

DEADLINE

Actuarial Costing and Return on Investment Analysis for the Modernization of the Federal Workers’ Compensation RegimeEmployment and Social Development Canada is seeking a qualified Supply Arrangement Holder under E60ZT-18TSPS, specifically those in Tier 1 for Remote Work/Virtual delivery, with expertise in Stream 3, Category 3.8 – Financial Specialist, to conduct an independent actuarial costing analysis of the federal workers’ compensation regime. The analysis must evaluate the short-, medium-, and long-term direct and indirect costs under three scenarios: maintaining the current regime and implementing each of two proposed modernization options. The study must break down costs for the five federal employers with the highest claim volumes and a selected group of those with moderate claim volumes, while also calculating the return on investment for each modernization path. The contract is expected to span ten months from the award date, requiring approximately 220 days of effort, and will result in the award of a single contract. All work is to be performed remotely. The solicitation, numbered 100032367, was published on July 28, 2026, with responses due by August 26, 2026, and is managed by Contracting Authority Joshua De Sousa, reachable at nc-solicitations-gd@hrsdc-rhdcc.gc.ca.

Department of Employment and Social Development

POSTED

about 22 hours ago

DEADLINE

Safety Plan ImplementationThe contract titled Safety Plan Implementation requires the development and enforcement of a comprehensive site safety plan that adheres to all applicable OSHA and state safety regulations. This subcontract is issued by the state of Utah and is focused on ensuring safe working conditions through the establishment of structured safety protocols, training procedures, and ongoing compliance monitoring. The solicitation was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541690, which covers other scientific and technical consulting services. There is no specified set-aside type or place of performance details, indicating the scope may apply broadly across Utah state-regulated worksites. The contract does not list a point of contact, and all submissions must be made through the provided Utah BonfireHub portal.

POSTED

DEADLINE

Energy Data Management & Usage AnalyticsThe contract pertains to the comprehensive management and analysis of electricity usage data across all Texas Department of Transportation facilities, encompassing the collection, interpretation, and reporting of energy consumption patterns. The scope includes demand forecasting to anticipate future energy needs, detailed cost tracking to monitor operational expenses, and advanced anomaly detection to identify irregular usage that may indicate inefficiencies or equipment malfunctions. The contractor will be responsible for delivering actionable insights derived from energy data to support informed decision-making and resource optimization across TxDOT’s statewide infrastructure. The opportunity is classified as a subcontract under NAICS code 541690, indicating it falls within other scientific and technical consulting services, and is open for responses through TxDOT’s procurement portal. The solicitation was posted on July 27, 2026, with a deadline for submissions set for August 26, 2026. While the place of performance and point of contact details are unspecified, the work is expected to support TxDOT’s operations throughout the state of Texas. The contract does not designate a specific set-aside status, and all eligible vendors may compete for award based on technical capability and cost-effectiveness.

Texas Department of Transportation

POSTED

DEADLINE

ENV20260727 - Statewide Cultural ResourcesThe Virginia Department of Transportation is inviting multi-disciplinary cultural resource consulting firms to submit expressions of interest for a statewide on-call contract to deliver a range of cultural resource services, including archaeological and architectural surveys, cultural resource assessments, and related evaluations. This fixed billable rate contract has a maximum value of $3,000,000 per term and is open to qualified firms capable of supporting VDOT’s needs across the entire Commonwealth. All solicitation details, including submission instructions and required documentation, are accessible through the BidExpress portal, where registration is mandatory for participation but carries no fee. Inquiries must be submitted exclusively via the BidExpress Q&A section, ensuring transparency as all responses are made available to all potential offerors. Any updates, addenda, or changes to the solicitation will be published on the same portal under the designated solicitation number RFP-125083. The expression of interest deadline is 2:00 p.m. on August 17, 2026. VDOT is committed to full compliance with Title VI requirements, ensuring nondiscrimination in all aspects of the procurement process. The point of contact for questions is Dillon Smith, reachable via email or phone as listed in the contract data.

Virginia Department of Transportation

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThe contract requires strict adherence to hazard warning labeling protocols for any impeller or packaging containing hazardous or radioactive materials, as mandated by OSHA 29 CFR 1910.1200 and MIL-STD-129. All applicable substances must be clearly identified with standardized labels to ensure safe handling, storage, and transport, with compliance being non-negotiable throughout the production and delivery process. Any occurrence of radioactive materials exceeding established regulatory thresholds must be immediately reported to the Contracting Officer to facilitate appropriate oversight and mitigation. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 541690 and places performance at Norfolk, Virginia, with a tight response deadline of July 30, 2026. The requirement underscores the critical importance of regulatory compliance in defense-related supply chains, where mislabeling or failure to alert authorities could pose significant safety and legal risks. Participation necessitates a thorough understanding of federal hazardous materials standards and the ability to implement precise labeling procedures in alignment with military and workplace safety regulations.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

INSERT TOOL, RECEPTAThe contract pertains to the procurement of an INSERT TOOL ASSEMBLY with a RECEPTICAL O-RING, identified by NSN 4921-01-382-9778 and part number BA38897-01, with a required quantity of four units. Delivery must be completed within twenty days from contract award, shipped FOB origin, and inspected and accepted at the destination. Packaging must comply with ASTM D3951, but is subject to higher precedence requirements from the DLA Master List of Technical and Quality Requirements, with labeling and marking conforming to MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and the use of ozone-depleting chemicals is strictly prohibited; any substitute chemicals require prior approval unless explicitly authorized by governing specifications. The item is classified as a critical application and is subject to Covered Defense Information protocols, requiring compliance with CMMC Level 2 self-assessment standards. Shipping is directed to the Navy Submarine Torpedo Facility in Yorktown, Virginia, and must be sent via the fastest traceable means—parcel post is prohibited. The contract number is SPE7M4-26-T-289M, with a required delivery date of July 23, 2026, and the primary point of contact is Rory O'Reilly of the Department of Defense’s Fluid Handling Division.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

CLEANER, PRESSURE, SOThis contract is for the procurement of two units of a pressure cleaner under solicitation SPE7M4-26-T-289P, with a total price of $2.00 per unit and a required delivery within 20 days FOB origin. The item is identified by NSN 4940-01-497-9549 and is designated for delivery to the AWCF SSF Guam Storage Facility at Barrigada, Guam. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which are incorporated by reference, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents as authorized by NAVSEA. Portable devices containing mercury must meet shockproof standards and include a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Transportation guidelines are governed by DLAD Proc Notes C19 and C20. The action is a total small business set-aside under NAICS code 333310, with a response deadline of August 10, 2026, and the original required delivery date is July 23, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

COUPLING, TUBEThe contract is for the procurement of three tube couplings identified by NSN 4730-01-439-0937 and part number 19106, sourced from RITCHIE ENGINEERING CO INC. The unit price is $3.00 per piece, with a total contract value of $9.00, and delivery is required within 20 days from the contract award, delivered FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to the more stringent requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA’s packaging standards. The delivery destination is the USNS HECTOR A CAFFERATA at Dock 5, 8511 Kerns Street, San Diego, CA 92154, and shipment must be made via traceable freight—parcel post is strictly prohibited. The required delivery date is July 23, 2026, and the solicitation number is SPE7M3-26-T-7725, with the North American Industry Classification System code 332919. All technical and quality requirements referenced by R or I numbers are fully incorporated from the DLA Master List, and the version in effect at the time of solicitation issuance governs. Direct inquiries should be directed to William Cain at the provided contact information.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

COUPLING, PIPEThis contract specifies the procurement of a coupling, pipe identified by NSN 4730-01-445-0516, with a quantity of two units to be delivered within 20 days under solicitation SPE7M3-26-T-7720. The item must be supplied in strict compliance with DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Packaging and palletization must adhere to DLA’s procurement packaging requirements and the designated Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment must be sent via the fastest traceable means, explicitly excluding parcel post, and directed to USNS LUCY STONE at FPO AP 96692-7200 using the designated freight shipping address and vendor identification code. The original required delivery date is July 24, 2026, and the contract includes detailed government-use identifiers, contact information for William Cain of the Fluid Handling Division, and a direct link to the DIBBS portal for solicitation details.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

UNION, PIPEThe contract pertains to the procurement of three UNION, PIPE units with NSN 4730-01-481-4242 under solicitation SPE7M3-26-T-7722, requiring delivery within twenty days of award. The items must be packaged in strict compliance with ASTM D3951 and marked per MIL-STD-129, with packaging and palletization adhering to DLA’s RP001 packaging requirements, where applicable DLA Master List of Technical and Quality Requirements supersede ASTM standards. The Unit of Issue is each (EA), quantity is fixed at three units with zero variance allowed, and delivery is FOB origin with inspection and acceptance occurring at destination. The items must be shipped via fastest traceable means, explicitly prohibiting parcel post, to the military delivery point at USNS LUCY STONE T-AO 209, FPO AP 96692-7200, with freight shipping directed to MSC BATS SAN DIEGO, 9284 BALBOA AVE, using VSM code 92123 for DLA vendors. The required delivery date is July 24, 2026, and the contract includes specific government-only identifiers for tracking and processing. All technical and quality specifications referenced are governed by the DLA Master List, with revision control tied to the solicitation issue date.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

TUBE, METALLICThe contract is for one metallic tube, identified by NSN 4710-01-654-3969 and part number 3625292, under solicitation SPE7M4-26-T-289R, with a required delivery within ten days of award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and marking standards, and palletization must adhere to DLA packaging requirements. The item is strictly prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by the specifications. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, using the revision in effect at the time of solicitation or award. The shipment must be sent by the fastest traceable means, excluding parcel post, to Fort Campbell, Kentucky, with the shipping and mark for addresses identical. The required delivery date is July 13, 2026, and the point of contact for inquiries is Rory O’Reilly of the Fluid Handling Division.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.

Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETALThe contract is for a single nonmetallic hose assembly with NSN 4720-01-589-1315, requiring delivery within 10 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and any configuration changes must be submitted via an Engineering Change Proposal or a formal request for variance. Physical identification of the item is required per RQ017, though Item Unique Identification is waived per the service customer’s request under DFARS 252.211-7003(c)(1)(i). The solicitation, issued under contract number SPE7M4-26-T-289J, was posted on July 28, 2026, with responses due by August 10, 2026, and falls under NAICS code 326220. The contracting activity is the Fluid Handling Division of the Department of Defense, with Blake Tushar listed as the primary point of contact.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 10 hours ago

DEADLINE

FITTING, LUBRICATIONThe contract specifies the procurement of a single fitting and lubrication component with part number 3009 and NSN 4730-01-701-7933, requiring delivery of one unit within twenty days from the contract award date. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence and must be fully adhered to, including compliance with MIL-STD-129 for marking and labeling. Packaging must follow DLA Packaging Requirements for Procurement (RP001), and palletization must align with these same standards. The unit of issue is EA, and the contract references specific DLA procurement directives, including the removal of government identification from non-accepted supplies and the use of approved unit of issue conversions. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post, with the freight destination listed as USNS OSCAR V. PETERSON, FPO AE 09592. The required delivery date is July 24, 2026, and the contract is issued under solicitation SPE7M3-26-T-7721, managed by the Department of Defense’s Fluid Handling Division with William Cain as the primary point of contact.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

TUBE ASSEMBLY, METALThe contract is for the procurement of a metal tube assembly with NSN 4710012976637 and part number 58430, issued under solicitation SPE7M4-26-T-289F by the Defense Logistics Agency. Two units are required to be delivered within 20 days FOB destination, with no variance allowed in quantity. Delivery must adhere to MIL-STD-2073-1E packaging standards and MIL-H-775 preservation guidelines, with packaging marked in compliance with MIL-STD-129 using the U pack code and no special marking. Mercury or mercury-containing compounds are strictly prohibited in or on the hardware unless part of approved functional components like batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents; portable fluorescent lamps and instruments containing mercury must include a second containment boundary as per NAVSEA 5100-003D. All supplies must be delivered to the USS CHOSIN CG 65 at FPO AP 96662 via traceable transportation methods—parcel post is explicitly forbidden—and shipped using the RDD 777 procedure. The required delivery date is July 24, 2026, with the solicitation posted on July 28, 2026, and responses due by August 10, 2026. Inspection and acceptance occur at the delivery point, and all requirements align with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

PIPE, METALLICThe contract specifies the delivery of two metallic pipes, each with a nominal size of 2.000 inches, constructed seamless and meeting ASTM A74-05 or CISPI 301 specifications, featuring a service weight wall thickness and a 60.000-inch nominal length with a 17 hub end style, an inside diameter of 2.940 inches, and a 2.500-inch telescoping length on both ends. The pipes are not rated for maximum operating pressure or temperature and must comply with stringent marking requirements per MIL-STD-129, including the contract number, lot and serial numbers, contractor’s CAGE code, manufacturer’s code, and part number on each unit pack. Packaging must adhere to ASTM D3951 and DLA packaging requirements, with all items palletized according to RP001, and no ozone-depleting chemicals are permitted under any circumstance—substitutes require prior approval. The National Stock Number is 4710002775918, with a unit of issue of each, and a fixed quantity of two units with zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at the destination, within 20 days of the award, and must be shipped via the fastest traceable means, excluding parcel post, to Fort Bragg, North Carolina. Configuration changes require formal engineering change proposals or variance requests, and all technical and quality requirements referenced in the DLA Master List take precedence over any other standards. The required delivery date is July 24, 2026, and the contract is subject to full and open competition under solicitation SPE7M4-26-T-289C.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

KNOBThe contract pertains to the procurement of 741 units of a knob identified by NSN 5355-01-061-3013 under solicitation SPE7M4-26-Q-0890, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 88 days after award, with performance taking place at Hill AFB, Utah, 84056-5734. The item is classified as a commercial item, including commercial of a type, and must comply with all DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, accessible online. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major unless otherwise defined. Zero non-conformances are required in sample lots unless the contract explicitly states otherwise, and the manufacturer may choose attribute or variable inspection methods under MIL-STD-1916. Government identification must be removed from any non-accepted supplies. Responses are due by August 4, 2026, and the primary point of contact is Steven Chomos, reachable via email and phone.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 10 hours ago

DEADLINE