Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract focuses on the preparation and ongoing maintenance of Safety Data Sheets for hazardous components contained within medical test kits, ensuring full alignment with the Occupational Safety and Health Administration’s Hazard Communication Standard and Department of Defense regulatory requirements. This work is critical to supporting safe handling, storage, transport, and disposal of hazardous materials used in military medical applications and requires precise documentation that meets federal compliance standards. The subcontract is tied to the NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental, health, and safety compliance. Performance is expected to be centered in Williamsburg, Virginia, with a submission deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract is under the auspices of the Department of Defense through the Medical Supply Chain MD Surg FSF, emphasizing the strategic importance of maintaining accurate and up-to-date safety documentation for hazardous materials in military medical systems. While no set-aside type or point of contact is specified, the requirement underscores the need for contractor expertise in regulatory technical writing, chemical hazard classification, and Defense Logistics Agency compliance protocols.

General Info

Prepare and maintain Safety Data Sheets for military medical hazardous materials per OSHA and DoD standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

WILLIAMSBURG, VA, 23185-5830, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and maintenance of Safety Data Sheets (SDS) for hazardous components in the test kit, ensuring compliance with OSHA HCS and DoD requirements.

Similar Contracts

Same NAICS industry code

Radioactive Materials Notification & ComplianceThe contract requires the screening, documentation, and labeling of radioactive materials that may be present in cutting tools exceeding regulatory thresholds, ensuring full compliance with 10 CFR 20 and Department of Defense standards. This includes identifying any radioactive contamination, maintaining accurate records, and applying appropriate labels to signify the presence of regulated materials, all performed with precision to meet federal and military safety protocols. The work must be carried out in accordance with established procedures to prevent exposure risks and ensure regulatory adherence throughout the handling and reporting process. This subcontract is issued under NAICS code 541620 by the Defense Logistics Agency, a component of the Department of Defense, with performance required at a location in Springfield, ZIP 65803-9513. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, indicating a tight turnaround for qualified vendors to submit proposals. Although no set-aside type or point of contact is specified, the emphasis on regulatory compliance and precise documentation underscores the critical nature of the task within defense supply chain safety protocols.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires comprehensive services for the hazard classification, compliant packaging, labeling, and safety data sheet documentation of medical supplies identified as hazardous under Department of Defense regulations. All work must align with DoD standards to ensure safe handling, transportation, and storage of regulated materials, with particular attention to accuracy in classification and adherence to federal hazardous material compliance requirements. Deliverables must support the integrity of the medical supply chain and meet rigorous operational and safety benchmarks set by the agency responsible for procurement. The contract is issued as a subcontract under NAICS code 541620 by the Department of Defense’s Medical Supply Chain Pharm FSA, with performance centered at APO, 09094-3219. Proposals must be submitted by August 10, 2026, with the solicitation posted on August 2, 2026. The procurement is not subject to any set-aside classification and is open to qualified subcontractors capable of delivering full-cycle hazardous materials documentation and packaging solutions. The point of contact information is not provided, but the solicitation can be accessed through the DIBBS portal for further details and submission guidelines.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract titled Hazardous Materials Compliance and Labeling Services requires the provision of regulatory compliance services for hazardous materials, specifically focusing on the preparation of hazard warning labels and Safety Data Sheets in accordance with OSHA and Department of Defense standards. The work is classified under NAICS code 541620 and is structured as a subcontract, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on August 2, 2026, and responses must be submitted by August 10, 2026, with the contracting activity under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. All deliverables must strictly adhere to federal safety regulations to ensure accurate documentation and labeling of hazardous substances used in military and defense operations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Labeling and Compliance SupportThe contract requires the provision of hazard communication labeling for hazardous components, ensuring full compliance with applicable federal regulations including OSHA’s HazCom standard, the Federal Insecticide, Fungicide, and Rodenticide Act, and the Federal Food, Drug, and Cosmetic Act. All labels must adhere to MIL-STD-129 specifications and be submitted prior to contract award to demonstrate readiness and adherence to military labeling requirements. The work is scoped under a subcontract for the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation, identified under NAICS code 541620 for scientific research and development services, was posted on August 2, 2026, and responses are due by August 10, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Hazardous Material Safety Data Sheet (SDS) Preparation and ComplianceThe contract requires the preparation and ongoing maintenance of Safety Data Sheets (SDS) for hazardous materials used in medical and surgical supply chains, including sterilants and adhesives, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200(g) and Federal Standard No. 313. The work involves accurately authoring SDS documents that meet all federal regulatory requirements for hazard classification, labeling, handling instructions, emergency response, and chemical composition disclosures, with continuous updates to reflect any changes in formulations, regulatory criteria, or safety data. This subcontract, identified under NAICS code 541620 for scientific and technical consulting services, is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with responses due by August 10, 2026. The performance of this work is not restricted to a specific geographic location, and the effort supports the safety and regulatory integrity of hazardous materials utilized across military medical operations. All deliverables must adhere strictly to U.S. federal standards for chemical safety documentation, with no set-aside provisions specified, making it open to all qualified contractors capable of ensuring OSHA and federal compliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract titled Hazardous Materials Compliance and Labeling Services pertains to ensuring full adherence to hazardous material regulations for defense hardware, with specific requirements including accurate labeling of containers, preparation of Safety Data Sheets, and strict prohibition of mercury in all components. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, exclusively available to small businesses as defined by the Small Business Administration, and falls under the NAICS code 541620 for management consulting services. The work is performance-based and must be executed in Tracy, California, with a zip code of 95304-5000, and is issued by the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, and interested parties must submit proposals through the designated DIBBS portal. Compliance with all federal hazardous materials standards is mandatory, and failure to meet labeling, documentation, or material restriction requirements will result in contract noncompliance.

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive identification, documentation, and labeling of hazardous materials in full compliance with OSHA’s Hazard Communication Standard and MIL-STD-129, ensuring all materials are properly marked and documented for military and industrial use. Prior to contract award, vendors must submit complete Material Safety Data Sheets and approved warning labels, demonstrating readiness to meet regulatory and operational safety requirements. The work is designated as a subcontract under NAICS code 541620, with performance specifically located in New Cumberland, Pennsylvania, at the zip code 17070-5002. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense under LAND SUPPLIER OPNS ENGINES, reflecting a focus on defense supply chain integrity and safety compliance.

LAND SUPPLIER OPNS ENGINES

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Handling & SDS ComplianceThe contract pertains to the identification, classification, and documentation of hazardous materials utilized in manufacturing processes, with a strict emphasis on compliance with OSHA regulations and the Globally Harmonized System of Classification and Labelling of Chemicals. The winner will be responsible for ensuring accurate Safety Data Sheet submission and proper hazard classification according to GHS standards, maintaining full regulatory alignment throughout the lifecycle of material usage. This work is critical for operational safety, legal compliance, and supply chain transparency within the manufacturing environment. The contract is a subcontract issued under NAICS code 541620 by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required at a location in New Cumberland, Pennsylvania, ZIP 17070-5002. It was posted on August 2, 2026, and responses are due by August 10, 2026. There is no set-aside designation specified, and while no point of contact is listed, the official solicitation details are accessible via the provided DIBBS link. All activities under this contract must adhere to federal safety and documentation mandates, and failure to meet compliance requirements may result in contract termination or financial penalties.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThis contract requires full compliance with OSHA’s 29 CFR 1910.1200 Hazard Communication Standard for the identification, labeling, and documentation of hazardous materials, including the preparation of Safety Data Sheets and the application of MIL-STD-129 hazard labels for military shipments. The work involves ensuring all hazardous substances are properly classified, labeled, and accompanied by accurate documentation to meet federal regulatory and Department of Defense requirements. The performance location is specifically designated as Fort Bragg, North Carolina, with a response deadline of August 13, 2026, and the contract is structured as a subcontract under NAICS code 541620, which pertains to management consulting services related to environmental and safety compliance. The procuring entity is the Maritime Supply Chain ESOc Buys office under the Department of Defense, indicating this effort supports logistics and supply chain operations within the military ecosystem.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Identification and Safety Data ReportingThe contract requires the identification and documentation of hazardous components, such as batteries, in compliance with OSHA’s Hazard Communication Standard and DFARS regulations, with a focus on accurate safety data sheet preparation and proper labeling of all hazardous materials. All deliverables must adhere to federal safety and reporting protocols to ensure safe handling, storage, and transportation of hazardous substances within the supply chain. The work is scoped under a subcontract with a NAICS code of 541620 for scientific research and development services, and performance is mandated to occur at the APO address with zip code 96543-4010. Bidders must submit responses by the deadline of August 10, 2026, following the solicitation issued by the Department of Defense under the Medical Supply Chain FSH agency.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 16 hours ago

DEADLINE

Hazardous Material Labeling & Safety Data ComplianceThe contract requires the development and submission of hazard warning labels and Safety Data Sheets (SDS) that fully comply with OSHA’s Hazard Communication Standard (HCS), ensuring accurate chemical hazard identification and communication for military use. These materials must adhere to stringent Department of Defense standards including DFARS 252.223-7001 for hazardous material labeling, MIL-STD-129 for uniform packaging and labeling of military shipments, and DLA packaging requirements to ensure consistency, durability, and regulatory alignment across the defense supply chain. All documentation must be technically accurate, properly formatted, and submitted in a format compatible with federal logistics systems, with the work performance location specified as San Diego, CA, 92113-3650. This is a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services, and the solicitation is issued by the Department of Defense’s Medical Supply Chain Pharm FSA. The opportunity is open for response until August 10, 2026, with submissions required prior to the deadline to meet contractual obligations. The work will support the safe handling, storage, and transport of hazardous materials within military medical supply operations, and compliance with all referenced standards is non-negotiable. Contractors must possess demonstrated expertise in chemical compliance, military logistics labeling, and SDS authoring under federal regulations, with no set-aside designation specified, allowing eligible subcontractors to compete without restrictions.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 16 hours ago

DEADLINE

Sustainable & Environmentally Compliant Product SourcingThe contract requires suppliers to provide products that fully comply with FAR 52.223-23 sustainability standards, with a strict focus on environmentally responsible practices including the use of recyclable packaging and energy-efficient manufacturing processes. All delivered goods must align with federal guidelines designed to reduce environmental impact throughout the product lifecycle, ensuring that sourcing supports broader defense and sustainability objectives set by the Department of Defense. This subcontract, issued under NAICS code 541620 by the Medical Supply Chain MD Surg FSF, is open for response until August 10, 2026, with performance expected to take place in Yorktown, Virginia, ZIP 23691-5100. The solicitation is posted on the DIBBS platform and is part of ongoing efforts to integrate eco-conscious supply chain practices across military medical operations. Suppliers must demonstrate their ability to meet these environmental criteria as a non-negotiable condition of award, with no set-aside provisions indicated for small or disadvantaged businesses.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

ECG Recording Paper SupplierThe contract seeks a supplier to provide medical-grade electrocardiogram recording paper packaged in sealed protective containers that meet Department of Defense Logistics Agency packaging and medical marking standards. All deliveries must comply with federal logistics protocols, including accurate labeling and adherence to government invoicing procedures to ensure seamless integration into military medical supply chains. The paper must maintain integrity and sterility throughout storage and transit, as it is intended for use in critical healthcare environments within defense medical facilities. The solicitation is classified as a subcontract under NAICS code 322230, with a response deadline of August 10, 2026, and was posted on August 2, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, indicating this procurement supports military healthcare operations. While specific delivery locations and point of contact details are not provided, compliance with DLA standards and federal documentation requirements is mandatory. The supplier must be prepared to meet stringent quality, packaging, and logistical benchmarks to fulfill obligations under this defense contract.

Stationery Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Domestic Freight & Delivery to DoD FacilityThe contract requires the transportation of packaged baby shampoo from the supplier to a designated delivery address in Raleigh, NC, under FOB Destination terms, meaning the seller retains ownership and responsibility for the goods until they reach the final destination. Delivery must be completed within five business days after the order is placed, with strict adherence to the on-time delivery requirement. The shipment is destined for a Department of Defense facility, specifically under the Medical Supply Chain MD Surg FSF, indicating this is a government-related logistics requirement. The North American Industry Classification System code 484220 identifies this as a contract for truck transportation of freight, underscoring the need for qualified and compliant freight carriers. The solicitation is open for responses until August 10, 2026, and the procurement is categorized as a subcontract, suggesting it supports a larger government contract. The location is specified with a ZIP code of 27607-0000, and while the exact delivery point within Raleigh is not detailed, it is tied to a DoD facility, requiring compliance with federal shipping and security protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Government-Compliant Packaging & Marking ServicesThe contract requires full compliance with MIL-STD-129 and MMS No. 1 standards for the marking and labeling of shipping containers used in Department of Defense logistics operations. This includes the application of standardized barcoding, lot tracing systems, and other DoD-specific identification markings to ensure accurate inventory tracking, accountability, and supply chain visibility from point of origin to final delivery. All labeling must meet exacting military specifications to support seamless integration within federal logistics networks and enable automated scanning and data capture at any stage of transit. The work is to be performed at a designated location in Raleigh, North Carolina, with a submission deadline of August 10, 2026. This subcontract opportunity is issued under NAICS code 811212 and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The packaging and marking services are critical to maintaining compliance with federal defense logistics protocols, ensuring that all materiel is properly identified, traceable, and ready for immediate deployment in operational environments. Failure to adhere strictly to the referenced standards will result in non-compliance and rejection of delivered items.

Computer and Office Machine Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels and Safety Data Sheets for a shipment of baby shampoo, ensuring full compliance with federal and military hazardous materials regulations. Despite the product being a personal care item, it must be treated as a hazardous material under applicable transport and handling standards, necessitating accurate labeling and documentation to meet Department of Defense requirements. The work is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and performance is expected to be delivered to the Raleigh, North Carolina location with a zip code of 27607-0000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Commercial Off-the-Shelf (COTS) Baby Shampoo SupplyThe contract seeks the supply of commercially available baby shampoo in 7 oz bottles, each case containing 24 bottles, and requires full compliance with federal medical item marking and packaging standards to ensure proper handling, tracking, and use within healthcare settings. The product must meet established commercial off-the-shelf criteria with no customization, adhering to established quality and safety benchmarks for pediatric use. The solicitation falls under NAICS code 325620, indicating classification within the soap and cleaning compound manufacturing sector, and is structured as a subcontract under the Department of Defense's Medical Supply Chain. Performance is required at the designated location in Raleigh, North Carolina, with a zip code of 27607-0000, and all deliveries must align with federal medical logistics protocols. The opportunity was posted on August 2, 2026, with responses due by August 10, 2026, and is accessible via the DIBBS platform under solicitation number SPE2DS26T297G. Only vendors capable of meeting federal medical packaging and labeling requirements will be considered, and the supply must support the consistent procurement needs of military healthcare facilities without interruption or deviation from established specifications.

Toilet Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

Packaging & Kitting Services for Medical DevicesThe contract involves providing secondary packaging, sterilization validation support, kitting, barcoding, and preservation services for medical trays in accordance with military packaging and marking standards. These activities are critical to ensuring that medical devices meet stringent defense and operational requirements for readiness, safety, and traceability across the supply chain. The work encompasses the full lifecycle of package preparation, from assembly and labeling to environmental protection and compliance with federal specifications for military use. The opportunity is structured as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF and is classified under NAICS code 339114, which pertains to medical equipment and supplies manufacturing. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DIBBS platform. While specific locations and points of contact are not provided, the place of performance is expected to align with defense logistics requirements, and all deliverables must adhere strictly to authorized military packaging protocols to ensure interoperability and compliance with established defense standards.

Dental Equipment and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

Radioactive Materials Notification & Handling SupportThe contract seeks regulatory support for the declaration and labeling of trace radioactive materials contained in medical devices, ensuring full compliance with Federal Acquisition Regulation FAR 52.223-7 and Nuclear Regulatory Commission guidelines. This subcontract requires expert assistance in navigating the complex requirements surrounding the identification, documentation, and safe handling of low-level radioactive components in surgical and medical equipment, with a focus on accurate labeling and reporting to meet federal and agency-specific mandates. The work must align with strict regulatory frameworks to prevent noncompliance risks during procurement, distribution, and use of these devices. The solicitation, issued under NAICS code 541380 for other scientific and technical consulting services, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office and is open for responses until August 10, 2026. The contract is classified as a subcontract and does not specify any set-aside provisions. Performance location details are not provided, nor are specific point of contact details listed, but all proposals must be submitted through the DIBBS portal using the referenced solicitation number SPE2DS26T298S. Success will depend on demonstrating proven experience with radioactive material declarations in medical device supply chains and a clear understanding of both NRC regulatory obligations and federal acquisition compliance obligations.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract pertains to the provision of hazard communication support for medical kits containing hazardous components, with a focus on ensuring full compliance with the Globally Harmonized System of Classification and Labeling of Chemicals. This includes the accurate development and implementation of hazard labels, generation of Safety Data Sheets, and adherence to all applicable regulatory requirements related to the handling, storage, and transportation of hazardous materials within medical supply environments. The work must meet stringent standards to safeguard personnel and ensure regulatory alignment across domestic and international operations. The contract is classified as a subcontract under NAICS code 541690 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. It was posted on August 2, 2026, with a response deadline of August 10, 2026. The performance location is not specified, indicating potential nationwide or global applicability depending on the distribution of medical kits. All deliverables must be completed in strict accordance with federal safety and compliance mandates, and contractors are expected to demonstrate proven expertise in chemical regulation, documentation integrity, and medical supply chain logistics.

Other Scientific and Technical Consulting Services

POSTED

about 16 hours ago

DEADLINE

Supply of Safety-T-Centesis Catheter Drainage Trays (6FR x 16cm)The contract entails the procurement, packaging, marking, and delivery of sterile medical device trays specifically designed for thoracentesis and paracentesis drainage procedures, featuring a 6FR x 16cm Safety-T-Centesis catheter. All items must comply with rigorous military and federal medical standards to ensure safety, sterility, and performance in field and clinical settings. The trays are intended for use by military medical personnel and must be manufactured and assembled to meet exacting specifications for reliability under demanding operational conditions. Submission of proposals is due by August 10, 2026, and the solicitation was posted on August 2, 2026, under the NAICS code 339112 for medical equipment manufacturing. This is a subcontract opportunity managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The place of performance and point of contact details are unspecified, but all deliveries must align with DLA logistics requirements. Interested parties must access the official solicitation via the DIBBS portal to review full technical and compliance obligations before responding.

Surgical and Medical Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

Medical Product Distribution and Delivery to DestinationThe contract involves the logistics and delivery of boxed nasopharyngeal airways to a designated destination in accordance with Department of Defense standards, specifically requiring full compliance with DLA inspection and acceptance protocols. Execution of this subcontract is tied to the NAICS code 424210, indicating a focus on medical and surgical equipment distribution. The place of performance is listed as APO with ZIP code 96264-2022, signifying that delivery must be made to a military postal address, likely supporting overseas operations. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, under the Medical Supply Chain MD SURG FSF organization within the Department of Defense. All deliveries must meet stringent quality and documentation requirements to ensure readiness and safety for use in medical environments. The nature of the product demands precise handling, packaging, and traceability throughout the supply chain, with inspections conducted by DLA authorities prior to acceptance. Although the point of contact and specific office details are not provided, the contract is accessible via the DIBBS platform, indicating it is managed through official DoD procurement channels. The subcontract aims to ensure timely and compliant supply of critical medical devices to authorized military locations without delay or deviation from federal standards.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract entails the packaging and labeling of sterile nasopharyngeal airways in accordance with Defense Logistics Agency standards, requiring compliance with hazard communication regulations and the assignment of National Stock Number labels. All work must be performed to ensure the products are properly contained within DLA-compliant packaging that meets military logistics requirements for distribution and use in operational settings. The packaging process must maintain sterility and integrate all necessary labeling for traceability, safety, and inventory management within the Department of Defense supply chain. This is a subcontract opportunity under the NAICS code 325998, posted on August 2, 2026, with a response deadline of August 10, 2026. Performance is designated to occur at APO 96264-2022, reflecting the military nature of the project. The contracting activity is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense, and interested parties must submit proposals through the DIBBS platform at the provided link to be considered for award.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

Manufacture and Supply of Sterile Nasopharyngeal Airway DevicesThe contract requires the manufacture, sterilization, packaging, and delivery of flexible, latex-free, sterile nasopharyngeal airways with an outer diameter of 127mm and a size of 30FR, all conforming to DLA specifications. The products must meet stringent quality and safety standards to ensure they are suitable for medical use in operational and clinical settings. The work is to be performed under a subcontract arrangement governed by Department of Defense procurement protocols, with the place of performance designated as APO 96264-2022, indicating potential logistics and distribution focus for military use. All units must be delivered in a fully sterilized and properly packaged condition to preserve sterility until point of use. The solicitation, issued under NAICS code 325620 for Medical Equipment and Supplies Manufacturing, was posted on August 2, 2026, with a response deadline of August 10, 2026. The contracting activity is managed by the Medical Supply Chain MD Surg FSF, underscoring its relevance to military medical readiness. While no set-aside type or point of contact is specified, the contract is open for competitive submission through the DIBBS platform, and qualified manufacturers must demonstrate their ability to produce, sterilize, and deliver the devices in compliance with all technical and regulatory requirements. Deliveries will be timed to support DoD medical supply needs, requiring precise adherence to volume, timeline, and conditioning specifications.

Toilet Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE