Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

ECG Recording Paper Supplier

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks a supplier to provide medical-grade electrocardiogram recording paper packaged in sealed protective containers that meet Department of Defense Logistics Agency packaging and medical marking standards. All deliveries must comply with federal logistics protocols, including accurate labeling and adherence to government invoicing procedures to ensure seamless integration into military medical supply chains. The paper must maintain integrity and sterility throughout storage and transit, as it is intended for use in critical healthcare environments within defense medical facilities. The solicitation is classified as a subcontract under NAICS code 322230, with a response deadline of August 10, 2026, and was posted on August 2, 2026. The acquiring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, indicating this procurement supports military healthcare operations. While specific delivery locations and point of contact details are not provided, compliance with DLA standards and federal documentation requirements is mandatory. The supplier must be prepared to meet stringent quality, packaging, and logistical benchmarks to fulfill obligations under this defense contract.

General Info

Supplier must provide sterile, DLA-compliant ECG paper for military medical use with federal packaging and invoicing standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

322230 - Stationery Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of medical-grade electrocardiogram (ECG) recording paper in sealed protective containers compliant with DLA packaging and medical marking standards. Delivery must align with federal logistics requirements including proper labeling and government invoicing.

Similar Contracts

Same NAICS industry code

Natural Cylinder Bottle SupplyThe contract entails the supply of S-26364B Natural Cylinder Bottles that must meet or exceed all specified technical and quality requirements without any unauthorized substitutions. Delivery must be fully compliant with all contractual conditions, and the supplier must be prepared for immediate inspection to verify conformance. The solicitation is categorized as a subcontract under NAICS code 322230, which pertains to glass container manufacturing. The contracting agency is the Health and Human Services Commission in Texas, with the opportunity posted on July 31, 2026, and responses due by August 14, 2026, at 4:30 PM. All work is expected to be performed within Texas, though specific delivery locations are not detailed. The procurement is managed through the Texas SmartBuy portal, and suppliers are expected to adhere strictly to the requirements outlined in the solicitation.

Health and Human Services Commission

POSTED

DEADLINE

Solicitation # IFB-26-0336

The City of Phoenix is seeking vendors through a five-year contract to supply standard and specialty printed envelopes to support multiple municipal departments. These envelopes are essential for high-volume mailing operations, including correspondence to residents and vendors, parking violation notices, citizen mail-in response envelopes, and self-addressed envelopes for court payment plans. The solicitation, identified as IFB-26-0336, was posted on July 31, 2026, with responses due by September 1, 2026. The procurement is managed by the Finance Department under the Arizona state agency, with the primary point of contact being Donald Collins, Finance Procurement Officer, reachable via email or phone. All deliveries are expected to be performed within Arizona, and the contract will serve the operational needs of the city across various functions requiring reliable and consistent envelope supply.

POSTED

DEADLINE

Supply of Labeled Item (NSN 7530-01-560-8965)The contract specifies the procurement and delivery of 266 units of an item identified by NSN 7530-01-560-8965, with strict adherence to military packaging and marking standards required for all deliveries. The item must be supplied in full compliance with applicable Department of Defense specifications to ensure compatibility and readiness for military use. The solicitation is structured as a subcontract under NAICS code 322230, indicating the nature of the manufacturing process involved, and performance is expected at the location in New Cumberland, Pennsylvania, with zip code 17070-5002 as the designated place of delivery. Responses are due by August 10, 2026, at 5:00 PM Eastern Time, following the posting date of July 30, 2026. The contracting authority is the Department of Defense, specifically under the Construction & Equipment T & IFO EQ office, and the solicitation is accessible through the DIBBS system via the provided UI link. There is no set-aside designation indicated, meaning the opportunity is open to all qualified vendors without preference for small business or other categories. All bidders are expected to meet the technical, logistical, and compliance requirements without exception to secure award.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2756

This contract pertains to the procurement of 266 units of a designated item identified by NSN 7530-01-560-8965 and purchase request 7017421864, under solicitation SPE8EN-26-T-2756. The delivery is required FOB origin, with a lead time of 146 days from the contract award, and the goods must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. No variance in quantity is permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, while marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization is governed by DLA’s packaging standards, and all technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List. The contract mandates adherence to federal procurement standards, including the removal of government identification from non-accepted supplies and the handling of covered defense information as applicable. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the unit of issue is aligned with ANSI X12 standards. The contract’s solicitation was issued on July 30, 2026, with a response deadline of August 10, 2026, and the NAICS code 322230 classifies the procurement under paper and paperboard container manufacturing. All deliveries are targeted for completion by January 4, 2027, with the original required delivery date set for December 18, 2026. Primary point of contact for inquiries is Jennifer Esworthy of the Department of Defense, and the contract is managed under the federal acquisition framework with no set-aside provisions.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Request for Quote - Executive Presentation Portfolios

Solicitation # DFW19593

The Dallas-Fort Worth International Airport Board is soliciting quotes for Executive Presentation Portfolios under solicitation number DFW19593, with submissions due by 2:00 p.m. Central Time on August 12, 2026, exclusively through the BonfireHub portal. The contract requires vendors to deliver products F.O.B. DFW International Airport, with all pricing inclusive of packaging, transportation, and shipping, and must reflect the Airport Board’s tax-exempt status. A sample of the portfolio bearing the official DFW logo must be submitted by the deadline at the vendor’s expense, and failure to provide an acceptable sample will render the quote non-responsive. The award will be made on a Lowest Price Technically Acceptable basis, where technical compliance—including adherence to specifications, branding requirements, and safety standards—is a prerequisite, and price is the determining factor among qualified respondents. Delivery is expected within 10 to 14 business days of shipment to the DFW Airport Central Warehouse or the Headquarters Building, with acceptance occurring at the point of delivery after inspection by the buyer for damage, accuracy of quantity, functional integrity, and compliance with all referenced specifications and samples. The seller must warrant the products for one year from acceptance, indemnify the Airport Board against claims related to product defects or operations, and comply with federal regulations including OSHA hazard communication standards, the Fair Labor Standards Act, and Executive Order 11246 relating to equal employment opportunity and affirmative action. Payment terms are net 30 days following invoice submission, which must reference the associated purchase order number. The seller is prohibited from offering gifts or incentives to influence procurement decisions, and any assignment of the contract requires prior written consent. All legal disputes must be resolved in Dallas or Tarrant County, Texas, and the entire agreement supersedes all prior understandings. No small business or socioeconomic set-aside applies, and no detailed accounting or appropriation data is provided.

Dfw International Airport

POSTED

DEADLINE

TAPE, PRESSURE SENSI

Solicitation # SPE8EN-26-T-2708

The contract specifies the procurement of 2 rolling units of pressure-sensitive tape, each 180 feet long and 2 inches wide, identified by NSN 7510-01-553-3457 and part number 743-BLK-2. The item is classified as a Type I (Code K) shelf-life item with a fixed 18-month shelf life that cannot be extended, and vendor responsibility includes proper labeling and dating prior to delivery. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life, and palletization must follow DLA packaging requirements. All shipments must be delivered FOB origin within 20 days of contract award, using traceable freight methods—parcel post is prohibited—and delivered to the specified Marine Aviation Logistics Squadron at MCAS New River, North Carolina. The material is subject to technical and quality requirements incorporated from the DLA Master List, and covered defense information provisions apply. The purchase request number is 7017643770, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery must be completed by July 24, 2026, and the contract is issued under solicitation SPE8EN-26-T-2708, with vendor details and government use codes provided for administrative tracking.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

TAPE, PRESSURE SENSI

Solicitation # SPE8EN-26-T-2707

This contract specifies the procurement of 36 rolls of pressure-sensitive tape, identified as a commercial off the shelf item with part number 7000049597 from 3M Company, measuring one inch wide by 72 yards long in blue. The item is governed by strictly defined technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and it carries a non-extendable 24-month shelf life under Type I, Code M classification. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including labeling with the manufacturing date and expiration date per RS016 and special marking code 32. The tape is subject to inspection and acceptance at the destination, with zero variance allowed in quantity. Delivery is required within 20 days to Marine Corps Air Station Yuma, with shipping instructions mandating traceable transport methods and prohibiting parcel post. Packaging must adhere to MIL-STD-129 marking standards, and palletization must follow DLA guidelines. The contract is issued under solicitation SPE8EN-26-T-2707 with an NSN of 7510016794381 and a total quantity of 36 rolls, each roll priced individually with a total contract value based on the stated unit price. The required delivery date is July 24, 2026, and the contract is managed by Jennifer Esworthy of the Department of Defense, with all documentation tied to official DLA processes and systems.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Envelope – Statement of Vote

Solicitation # ECBH-RFP-2026-4084-1

The Office of the Chief Electoral Officer, operating as Elections Canada, is seeking bids for the supply of printed envelopes on white and yellow paper for use in federal elections and referendums under solicitation ECBH-RFP-2026-4084-1. The contract will run from its effective date through March 31, 2027, with an option for two additional two-year extensions under the same terms. Proposals must be submitted by August 11, 2026, and can be delivered in person, by mail, or via Canada Post’s Connect service, but not by email or fax. Only Canadian suppliers and those from applicable trading partners are eligible to bid, with all submissions required to be sealed and addressed to the Proposal Receiving Unit during specified business hours in Gatineau, Quebec. The contract does not include any security clearance requirements. All communication regarding the solicitation must be directed exclusively to the Contracting Authority, Brandon Hua, via email at proposal@elections.ca, and inquiries received after the deadline will not be addressed. Bidders must obtain solicitation documents exclusively through the CanadaBuys website. A debriefing will be offered to unsuccessful bidders following the award announcement upon formal request. The preferred delivery date for the final goods is no later than November 17, 2026.

Office of the Chief Electoral Officer (Elections)

POSTED

DEADLINE

ESD-Sensitive Electronic Components Packaging and LabelingThe contract requires the provision of electrostatic discharge compliant packaging and labeling for sensitive electronic components, adhering strictly to MIL-STD-129 and IPC/JEDEC J-STD-609 standards. All packaging must include proper barcoding and special marking code ZZ to ensure traceability and compliance with military and industry specifications for handling ESD-sensitive devices. The work is scoped as a subcontract under the NAICS code 322230, and performance is to be carried out at Columbus, Ohio, with a zip code of 43213. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity originating from the Active Devices Division within the Department of Defense.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

The Hamilton GroupThe Department on Disability Services in the District of Columbia has issued a forecast for custom envelopes under a procurement initiative dated July 23, 2026. This action is preliminary and intended to provide vendors with advanced notice of an upcoming requirement, though no solicitation number has been assigned yet and no formal bidding process has been initiated. The contract is not currently designated with a specific set-aside classification, and there are no assigned NAICS codes or organizational type specifications. The place of performance and agency office address details remain unspecified, and no point of contact information has been provided. Interested parties should monitor the official procurement portal for updates and future solicitation releases.

Department on Disability Services (DDS)

POSTED

DEADLINE

EnvelopesThe District of Columbia Department of Motor Vehicles is forecasting a future procurement for customized mailing envelopes, with the opportunity posted on July 23, 2026. This forecast is intended to inform potential vendors of an upcoming requirement, though no solicitation number has been assigned yet and the contract type remains classified as a forecast without specific set-aside provisions or NAICS code identified. The envelopes are expected to be tailored to meet the agency’s operational needs, likely for official correspondence, notices, or service-related mailings. Performance of the contract will be located within the District of Columbia, though no specific city or address has been designated, and there is no point of contact listed for inquiries. Interested parties should monitor the official procurement portal for upcoming solicitations to submit bids when the formal request is released.

Motor Vehicles (DMV)

POSTED

DEADLINE

Card stockThe District of Columbia’s Chief Technology Office is forecasting a future procurement for card stock, with the opportunity posted on July 23, 2026. This is a forecasted requirement and not yet an active solicitation, meaning no formal bidding process has begun. The contract does not specify a solicitation number, set-aside type, NAICS code, or organization type, indicating that details are still under development. The place of performance and office address lack specific location data, suggesting the exact delivery or service location has not been finalized. There is no designated point of contact listed, which is common for forecasted listings as the procurement team may not yet be available for inquiries. Interested parties should monitor the official portal at the provided UI link for updates leading to a formal solicitation.

Chief Technology Officer (OCTO)

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

TEST STRIPS, SANITIZING

Solicitation # SPE2DS-26-T-301P

Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-302E

The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-301U

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-300Q

An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-301F

The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, HYDROGEN PEROX

Solicitation # SPE2DS-26-T-300S

The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, CARBON DIOXIDE

Solicitation # SPE2DS-26-T-301A

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-300U

The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

NEEDLE SET, INTRAOSS

Solicitation # SPE2DS-26-T-301Q

The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

GLOVES, CHEMICAL AND

Solicitation # SPE2DS-26-T-300Z

The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

TUBING, ANESTHESIA

Solicitation # SPE2DS-26-T-301G

The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-302G

The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE