Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Hazardous Materials Compliance & Safety Data Sheet (SDS) Management requires full adherence to OSHA HAZCOM standards through the preparation of accurate Safety Data Sheets, application of correct hazard labels, and diligent maintenance of all regulatory documentation related to hazardous substances used in manufacturing or preservation processes. The work must align with federal safety regulations and ensure that all chemical handling, storage, and usage practices within the scope of performance are properly documented and labeled to protect personnel and maintain compliance. This is a small business set-aside subcontract under NAICS code 541690, issued by the Department of Defense through LAND SUPPLIER OPNS VEHICLE SPT, with performance expected to occur in San Diego, California, 92136-3581. Responses must be submitted by August 6, 2026, and the contract is part of a broader effort to ensure regulatory integrity around chemical safety in defense-related operations. The solicitation is open exclusively to small businesses as defined by the SBA, and all subcontractors must demonstrate proven capability in hazardous materials compliance, SDS management, and regulatory documentation procedures.

General Info

Small business subcontract for hazardous materials compliance and SDS management in San Diego, per OSHA HAZCOM standards.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure compliance with OSHA HAZCOM standards by preparing Safety Data Sheets, applying hazard labels, and maintaining regulatory documentation for hazardous substances used in manufacturing or preservation.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of hazard warning labels and safety data sheets for hazardous materials used in cable production, ensuring full compliance with OSHA and Department of Defense standards. All documentation must be accurately formatted and scientifically valid to meet federal regulatory requirements for workplace safety and hazardous material handling. The work is under a subcontract and is performance-based, with the place of performance located at Barstow, California, ZIP 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, under the NAICS code 541690 for other professional, scientific, and technical services. The contracting entity is the ASC Commodities Division within the Department of Defense, and all deliverables must align with DOD’s specific protocols for hazard communication and material safety management.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Technical Documentation and Traceability ServicesThe contract requires the preparation and secure submission of DLA Form 918 along with all associated test documentation to ensure complete traceability of components throughout the supply chain, emphasizing accuracy, compliance, and accountability at every stage. This work is critical to maintaining the integrity of defense logistics and ensuring that all parts meet stringent military standards for identification, testing, and documentation. The task is part of a subcontract under the NAICS code 541690, issued by the Active Devices Division of the Department of Defense, with performance centered in Columbus, Ohio, ZIP 43213. Responses must be submitted by August 6, 2026, following the solicitation posted on July 26, 2026, and must align with federal traceability protocols to support defense system reliability and audit readiness. The nature of the work demands strict adherence to documented procedures and secure handling of sensitive technical data.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Regulatory and Compliance Documentation SupportThe contract requires the preparation and submission of comprehensive regulatory documentation including hazard warning labels, safety data sheets, and compliance certifications that meet stringent OSHA, DFARS, and military standards. This work must be completed both prior to contract award and throughout performance to ensure ongoing adherence to federal and defense-specific safety and compliance requirements. The deliverables are critical for enabling the procurement and handling of materials within defense supply chains where regulatory accuracy directly impacts operational readiness and safety. This subcontract is issued under the NAICS code 541690 and is managed by the ASC Commodities Division under the Department of Defense. The place of performance is FPO with a ZIP code of 09587, indicating operations may involve overseas or expeditionary logistics. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a short window for qualified vendors to submit proposals. While no set-aside type is specified, the contract is part of a larger defense acquisition framework, demanding strict timelines, regulatory precision, and the ability to support military logistics under high-stakes conditions.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires the preparation and submission of Safety Data Sheets (SDS) for hazardous materials to ensure full compliance with OSHA’s 29 CFR 1910.1200 regulations and the Defense Federal Acquisition Regulation Supplement (DFARS) clause 252.223-7001, which governs hazardous materials handling within Department of Defense contracts. This subcontract is specifically tied to the ASC Commodities Division and mandates accurate, up-to-date documentation that conveys hazard information, safe handling procedures, and emergency response protocols for all applicable substances used or distributed under the program. The SDS must meet all formatting, content, and language requirements specified by both federal safety standards and defense acquisition policies to support operational readiness and worker protection. Performance is expected to be executed in support of activities centered in San Diego, California, with a firm deadline for proposal submission set for August 3, 2026. The North American Industry Classification System code 541690 indicates the work falls under other scientific and technical consulting services, suggesting the contractor will provide specialized expertise in chemical safety documentation rather than manufacturing or distribution. While there is no set-aside classification provided, the solicitation is issued through the Defense Logistics Agency’s DIBBS platform, indicating it is open to qualified subcontractors seeking to fulfill defense-related compliance obligations. Contractors must be prepared to work under strict regulatory oversight and deliver documentation that is traceable, audit-ready, and aligned with DoD-specific environmental and safety requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with hazardous materials identification, labeling, and documentation standards for all kits or packaging involved, necessitating the preparation of Material Safety Data Sheets or Safety Data Sheets in accordance with the Globally Harmonized System of Classification and Labeling of Chemicals. All labeling must meet the requirements of OSHA 29 CFR 1910.1200 and the Defense Federal Acquisition Regulation Supplement DFARS 252.223-7001 to ensure accurate hazard communication across the supply chain. The contractor is responsible for implementing consistent, compliant procedures for classifying, marking, and documenting hazardous substances used in or with the delivered items. This subcontract, issued under NAICS code 541690 by the Department of Defense’s Land Supplier Operations Vehicle Support office, is focused on ensuring regulatory conformity in hazardous materials handling. The place of performance is designated as New Cumberland, Pennsylvania, with a bid response deadline of August 6, 2026. The solicitation is open for submission through the DIBBS system and carries no set-aside designation, meaning all eligible entities may respond. Compliance with all federal and defense-specific regulations governing hazardous material safety documentation and labeling is mandatory for award and performance.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Radioactive Materials Notification and LabelingThe contract titled Radioactive Materials Notification and Labeling requires compliance services to identify and properly label components that contain radioactive materials in accordance with MIL-STD-129 and applicable government notification standards. The work involves ensuring accurate marking, documentation, and reporting to meet federal regulatory requirements for handling and transporting materials with radioactive content. This subcontract is aimed at supporting defense supply chain integrity by enforcing strict labeling protocols and timely notifications to authorized entities. Performance of the contract is designated for Tinker Air Force Base with a zip code of 73145-8000, and the North American Industry Classification System code is 541690, indicating it falls under other scientific and technical consulting services. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026. The contracting agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and the procurement is managed via the DIBBS platform under solicitation number SPE4A726T595D. No set-aside type or point of contact details are specified, but the requirement is strictly tied to defense logistics and safety compliance.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires comprehensive identification, labeling, and documentation of hazardous materials used in manufacturing processes, ensuring full compliance with OSHA regulations and the Defense Federal Acquisition Regulation Supplement. A critical component involves the preparation, updating, and maintenance of Safety Data Sheets for all regulated substances, with strict adherence to federal standards for accuracy, accessibility, and currency. The work is tied to operations at Tinker Air Force Base, where the contractor must support defense manufacturing activities by maintaining rigorous records and ensuring workplace safety through proper hazardous material handling protocols. This subcontract is solicited under NAICS code 541690, indicating a focus on other scientific and technical consulting services, and is issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by August 3, 2026, with performance anticipated at the specified location in Oklahoma. The contractor must demonstrate expertise in regulatory compliance, industrial safety practices, and documentation systems to meet the demands of a defense environment governed by stringent federal oversight. Failure to maintain accurate Safety Data Sheets or mislabeling hazardous materials could result in noncompliance penalties and operational disruptions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA and Department of Defense hazardous materials regulations, focusing on the accurate preparation and timely submission of hazard labels and Material Safety Data Sheets to ensure all chemical handling and storage practices meet federal safety standards. Compliance is central to the scope, with documentation serving as a critical component for operational legality and workplace safety across all activities under this agreement. This subcontract, issued under NAICS code 541690 by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON, is performance-based and will be executed at the FPO location with ZIP code 09578. Interested parties must submit their responses by the deadline of August 6, 2026, and must be prepared to demonstrate proven experience in hazardous materials documentation and regulatory compliance. There is no set-aside designation specified, and the opportunity is open to qualified subcontractors capable of fulfilling the documentation and compliance obligations under federal hazardous materials protocols.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThis contract mandates the provision of OSHA-compliant hazard communication for hazardous materials used in the switch assembly, requiring accurate safety data sheets and proper labeling in accordance with DFARS and MIL-STD-129 standards. The work involves ensuring all hazardous substances are properly documented and marked to meet federal safety and traceability requirements, with full alignment to military specifications for labeling and data documentation. The deliverables must support safe handling, storage, and transportation of materials while adhering to regulatory frameworks governing defense supply chains. The solicitation is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside program, with a NAICS code of 541690, indicating it falls under other scientific and technical consulting services. It is issued by the Electrical Devices Division of the Department of Defense with performance required in Tracy, California, zip code 95304-5000. Responses are due by August 6, 2026, and the contract is open to qualified small businesses seeking to support defense logistics through compliant hazard communication systems.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the preparation and submission of Safety Data Sheets for all hazardous materials linked to a condensing unit or its components before the award is finalized. This obligation is critical to ensuring regulatory compliance and the safe handling, storage, and transport of hazardous substances throughout the supply chain. The work must be completed and delivered by the response deadline of August 6, 2026, under a subcontract structure governed by the Defense Logistics Agency within the Department of Defense. Performance is designated to occur at FPO, ZIP 96616, aligning with military logistics operations. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service category, specifically under other scientific and technical consulting services, suggesting the need for specialized expertise in chemical compliance and documentation. There is no set-aside designation, meaning all qualified entities may bid regardless of business size or owner demographics. The solicitation is open for response until the deadline, and failure to submit complete and accurate SDS documentation prior to award could result in disqualification or contract non-compliance. All submissions must meet federal and international standards for hazardous material identification and safety disclosure.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract titled Hazardous Materials Compliance & SDS Management requires full adherence to OSHA’s Hazard Communication Standard, encompassing the accurate preparation and maintenance of Safety Data Sheets, proper labeling of all hazardous materials, and compliance with environmental regulations. The work is scoped under a subcontract and falls under NAICS code 541690, indicating it involves other scientific and technical consulting services. Performance of this contract is designated to take place in Columbus, Ohio, with a zip code of 43213, and the responsible agency is the ACTIVE DEVICES DIVISION under the Department of Defense. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 6, 2026. All activities must be completed in alignment with federal safety and environmental mandates to support the operational requirements of the defense sector.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous and Radioactive Material Handling & LabelingThis contract requires strict adherence to MIL-STD-129 and OSHA HCS standards for the proper labeling and documentation of all items containing radioactive or hazardous materials. The work is governed by specific military and workplace safety regulations to ensure consistent, accurate identification and handling of dangerous substances throughout the supply chain. Compliance with these standards is mandatory to prevent exposure risks, facilitate safe transport, and meet federal operational requirements. The contract is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with the place of performance located in New Cumberland, Pennsylvania, ZIP 17070-5002. It was posted on July 26, 2026, and responses are due by August 3, 2026. The NAICS code 541690 indicates this falls under Other Scientific and Technical Consulting Services, suggesting the work involves specialized technical expertise in regulatory compliance rather than manufacturing or logistics directly. The subcontractor must deliver documentation and labeling systems that align precisely with federal standards without deviation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Qualified Component and Material SupplyThe contract entails the supply of Qualified Product List and Qualified Manufacturer List-eligible raw materials, including alloy steel and elastomers, specifically for defense and military applications requiring strict adherence to military specifications. All materials must be accompanied by full traceability documentation and certified compliance to ensure suitability for critical defense systems, with an emphasis on quality, consistency, and regulatory alignment. The effort is structured as a small business set-aside under the SBA program, exclusively available to total small businesses, and is classified under NAICS code 331110, indicating its focus on steel mills and ferroalloy manufacturing. Performance is required at the facility located in Anniston, Alabama, with a response deadline of August 14, 2026, and the solicitation posted on July 27, 2026. The contract falls under the Department of Defense, managed by the Land Supplier Operations Vehicle Support office, indicating its direct relevance to land-based military vehicle systems. Bidders must demonstrate proven capability in producing and delivering materials that meet stringent military standards, with documentation rigorously verified to support end-to-end supply chain integrity.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 1 hour ago

DEADLINE

Cybersecurity Compliance and Incident ResponseThis contract requires the implementation of CMMC Level 2 and NIST SP 800-171 cybersecurity controls to ensure compliance with Department of Defense standards for handling controlled unclassified information. The contractor must conduct thorough self-assessments to validate adherence to these controls and establish a robust incident response capability that includes reporting incidents via DIBNET. A critical requirement is the preservation of forensic data for a minimum of 90 days following any cybersecurity incident to support investigation and remediation efforts. The work is targeted toward a small business set-aside under the SBA’s Total Small Business Set-Aside program, and the NAICS code 541512 indicates the scope involves computer systems design and related services. Performance is to be carried out at a location in Anniston, Alabama, with responses due by August 14, 2026, under a subcontract structure awarded by the Department of Defense through its Land Supplier Operations Vehicle Support office.

Computer Systems Design Services

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) Preparation and SubmissionThe contract requires the preparation and submission of First Article Testing (FAT) samples and all associated documentation to the Defense Logistics Agency, ensuring full compliance with military standards including MIL-STD-129 for marking and packaging and DFARS Appendix F for material and process controls. The deliverables must include comprehensive test reports, material certifications, and verified packaging that meets all federal defense procurement requirements. The work is scoped as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541330 for engineering services. All submissions must be completed and delivered by the response deadline of August 14, 2026, with performance centered at the Anniston, Alabama location, ZIP 36201-4199, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support office.

Engineering Services

POSTED

about 1 hour ago

DEADLINE

Precision Machining of Flexible Shaft CouplingsThe contract calls for the manufacture of 52 flexible shaft couplings identified by NSN 3010-01-449-3100, all of which must comply with military specifications covering material composition, dimensional tolerances, and performance testing. Material certification is mandatory, and each unit must undergo rigorous final inspection at the point of origin to ensure full compliance with contractual and military standards. The work is part of a total small business set-aside under the SBA program, restricting eligibility to small businesses as defined by the FAR. The North American Industry Classification System code is 332999, indicating it falls under other fabricated metal product manufacturing. The place of performance is designated as Anniston, Alabama with a zip code of 36201-4199, and the contracting activity is under the Department of Defense through the Land Supplier Operations Vehicle Support organization. The solicitation was posted on July 27, 2026, with a response deadline of August 14, 2026, and is structured as a subcontract opportunity.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

COUPLING, SHAFT, FLEXThe contract is for the procurement of 52 flexible shaft couplings with NSN 3010-01-449-3100 under solicitation SPE7L3-26-Q-1216, issued by the Department of Defense’s Land Supplier Operations Vehicle Support division. The item is subject to a total small business set-aside and is governed by specific technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. Delivery is required 399 days after award, with performance occurring at Anniston, Alabama, 36201-4199. The technical data associated with this item is controlled under either ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, including foreign national employees and subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors holding approved U.S./Canada Joint Certification Program certification, having completed mandatory DOD export control training, and received prior approval from DLA. The contract is subject to DFARS 252.225-7048 and requires removal of government identification from non-accepted supplies. The solicitation was posted on July 27, 2026, with responses due by August 14, 2026, and the contractor must be certified at CMMC Level 2 as a Third-Party Assessment Organization. Point of contact is Benita Umoren, reachable via email and phone provided.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 1 hour ago

DEADLINE

Domestic Subcontracting Compliance CoordinationThis contract requires coordination to ensure all subcontracting activities strictly adhere to DFARS 252.244-7999, with a focus on verifying that performance is carried out domestically within the United States and that CDI security protocols are fully maintained. The effort centers on compliance oversight to guarantee that subcontractors meet regulatory standards for domestic sourcing and safeguarding sensitive information. All work must be performed at the designated location in Cherry Point, North Carolina, with zip code 28533-5040, and the contracting activity falls under the Department of Defense through the Land Supplier Operations Vehicle Support office. The solicitation is structured as a Total Small Business Set-Aside in accordance with FAR 19.5, meaning only small businesses are eligible to compete, and it is classified under NAICS code 541611 for Management, Scientific, and Technical Consulting Services. Proposals must be submitted by the deadline of August 6, 2026, with the solicitation posted on July 26, 2026. The contract type is a subcontract, and the successful offeror will be responsible for demonstrating and documenting U.S.-based work performance while upholding all security requirements related to Controlled Defense Information. Access to the full solicitation is available through the DIBBS portal.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires the provision of compliant packaging, preservation, and labeling of precision shafts in accordance with military standards, ensuring complete adherence to all applicable regulations. This includes proper handling, containment, and documentation of any hazardous materials that may be present during the process, with full compliance to federal guidelines governing hazardous material transport and storage. All work must be performed to maintain the integrity, functionality, and safety of the shafts throughout packaging, storage, and transit phases. This is a small business set-aside subcontract under NAICS code 561990, reserved exclusively for small businesses as defined by the SBA, with a response deadline of August 6, 2026, and a posted date of July 26, 2026. Performance is mandated at Cherry Point, North Carolina, 28533-5040, under the oversight of the Department of Defense through the Land Supplier Operations Vehicle Support office. Bidders must be fully capable of meeting military specification requirements and must demonstrate expertise in packaging precision components under strict compliance protocols, with no exceptions for nonconformance.

All Other Support Services

POSTED

DEADLINE

Precision Machined Shaft Manufacturing (Fuel Control Cam Shaft)The contract calls for the manufacture of seven precision-machined fuel control camshafts, identified by NSN 3040009188983, to exacting military standards ensuring proper form, fit, function, and material integrity. These components are critical to vehicle fuel systems and must meet stringent quality and performance benchmarks aligned with defense requirements. The work is subject to a Total Small Business Set-Aside under SBA regulations, meaning only small businesses qualify to bid, and the NAICS code 332999 classifies the effort under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the place of performance is specified as Cherry Point, North Carolina, with the ZIP code 28533-5040. The contract type is a subcontract, and the awarding agency is the Department of Defense under the Land Supplier Operations Vehicle Support division. All work must be completed in accordance with the technical and production requirements dictated by military specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Small Business Teaming / Prime Subcontract ParticipationSmall businesses are invited to participate as subcontractors under a prime contract focused on manufacturing, packaging, or compliance-related tasks, with the potential to support defense supply chain operations. The opportunity is structured to enable small business involvement through teaming arrangements, and successful participants will be required to provide post-award representation under small business programs to maintain compliance and eligibility. The solicitation is tied to NAICS code 332999, covering other miscellaneous manufacturing, and is managed by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization. Performance will be centered at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Interested parties must respond by the deadline of August 6, 2026, and while the solicitation number is not listed, details can be accessed through the provided DIBBS link. There is no specific set-aside designation indicated, but the participation framework is designed to encourage and facilitate small business engagement within a federal contracting environment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThe contract requires the provision of packaging, preservation, and labeling services for a mounting kit in strict compliance with military standards. All components must be packaged using moisture barrier bags, desiccants, and labeling that adhere to MIL-STD-2073-1 Appendix D, D.3.1.b, ensuring long-term protection against environmental degradation. Labeling must conform to MIL-STD-129 specifications, clearly displaying the National Stock Number, contract identification, and exact quantity of items contained within each package to guarantee traceability and accountability throughout the supply chain. The work is scoped for a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support, with performance required at New Cumberland, Pennsylvania 17070-5002. Responses are due by August 6, 2026, following the July 26, 2026 posting date, and the action falls under NAICS code 493190 for warehousing and storage.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machining and Fabrication of Mounting Kit ComponentsThe contract involves the manufacture of precision metal components for the MOUNTING KIT, BODY, V, requiring detailed CNC machining, welding, and final assembly operations strictly in accordance with military specifications and approved technical drawings identified by R-numbers RA001, RP001, and RQ011. All work must meet rigorous quality and dimensional standards to ensure structural integrity and operational reliability under demanding field conditions, with no tolerance for deviation from the approved designs. The scope of performance is tightly defined to ensure full compliance with defense system requirements, and all processes must be traceable and documented to support certification and inspection protocols. The contract is classified as a subcontract under NAICS code 332999, posted on July 26, 2026, with a response deadline of August 6, 2026, and is administered by the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office. Performance is required at the specified location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Although no set-aside designation or point of contact is provided, interested parties must submit proposals through the official DIBBS portal linked in the solicitation, adhering to all technical, logistical, and compliance obligations outlined in the documentation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE