Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Compliance and Safety Data Sheet (SDS) Support

Active

Federal

Response Deadline07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the preparation and ongoing maintenance of Safety Data Sheets (SDS) for hazardous materials linked to specific components, ensuring full compliance with OSHA’s 29 CFR 1910.1200 and Federal Standard No. 313. This work requires accurate documentation of chemical hazards, handling procedures, emergency measures, and regulatory information to meet federal safety standards for workplace and transportation safety. The contractor is responsible for keeping SDS current as material formulations or regulations change, and must be capable of delivering compliant documentation in the required formats and timelines to support Department of Defense operations. This subcontract is issued under NAICS code 541620, classified as scientific and technical consulting services, and is associated with the Active Devices Division of the Department of Defense. The place of performance is designated as Jacksonville, Florida, with a zip code of 32212-0103. The solicitation was posted on July 17, 2026, with a response deadline set for July 22, 2026, indicating a tight turnaround timeline for offers. While no set-aside type or point of contact is specified, the contract is accessible via the DIBBS platform and is intended to support critical safety and regulatory functions within a defense supply chain context.

General Info

Prepare and maintain compliant SDS for hazardous materials per OSHA and Federal Standard 313 for DoD operations in Jacksonville, Florida.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Response DeadlineJul 22

Submission deadline

Response Deadline

07/22/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Prepare and maintain Safety Data Sheets (SDS) per OSHA 29 CFR 1910.1200 and Federal Standard No. 313 for hazardous materials associated with the component.

Similar Contracts

Same NAICS industry code

Environmental Compliance and PermittingThe contract titled Environmental Compliance and Permitting seeks a subcontractor to manage environmental permitting, develop Spill Prevention, Control, and Countermeasure plans, and coordinate with the Georgia Environmental Protection Division to ensure compliance with regulations for underground storage tanks and fuel systems. The work is focused on regulatory adherence within the City of Rome’s jurisdiction and requires expertise in state-specific environmental requirements, particularly those governed by the Georgia EPD. The scope involves navigating complex permitting processes, preparing documentation for UST systems, and maintaining ongoing communication with state regulators to achieve and sustain compliance. The solicitation was posted on July 17, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 541620 for environmental consulting services. The contract type is a subcontract, though no set-aside provisions are indicated, and the place of performance is linked to the City of Rome in Georgia. All deliverables must align with state environmental regulations and be submitted in a manner that facilitates approval by the Georgia EPD. The work requires a thorough understanding of federal and state UST regulations, SPCC plan development standards, and the ability to interface effectively with state environmental agencies to resolve compliance issues promptly.

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Environmental Site Assessment and MonitoringThe contract pertains to environmental site assessment and monitoring activities tied to pre-construction phases and ongoing site development, requiring comprehensive surveys to evaluate ecological, geological, and regulatory conditions before any ground-disturbing work begins. It mandates continuous environmental monitoring throughout the development process and the submission of detailed compliance reports to ensure adherence to applicable environmental standards and regulations. The work scope is aligned with NAICS code 541620, indicating it involves environmental consulting services and is structured as a subcontract under the Utah agency. Responses are due by August 5, 2026, with the opportunity posted on July 17, 2026, and all performance activities are expected to occur within Utah, though specific locations are not detailed. There is no set-aside designation specified, and the point of contact information is not provided.

POSTED

about 20 hours ago

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation is a subcontract under NAICS code 541620, issued by the Health and Human Services Commission in Texas, aimed at assessing, monitoring, and mitigating environmental impacts related to stormwater, wetlands, and hazardous materials. It requires the contractor to deliver comprehensive environmental services ensuring regulatory compliance and long-term environmental protection across project sites within the state. The work involves detailed environmental evaluations, ongoing site monitoring, and implementation of remediation strategies to address contamination and ecological disturbances, with a focus on adhering to state and federal environmental standards. The solicitation was posted on July 17, 2026, with a response deadline of August 7, 2026, at 4:30 PM, leaving potential bidders a limited window to submit proposals. The contract does not specify a set-aside classification or point of contact, and performance location details including city and zip code are not provided, suggesting work may be distributed across multiple sites within Texas. The official portal for the solicitation is accessible via the Texas SmartBuy platform, which serves as the primary avenue for submission and communication. Contractors must demonstrate expertise in environmental remediation, regulatory compliance, and field monitoring to meet the technical and operational demands of this subcontract.

Health and Human Services Commission

POSTED

about 22 hours ago

DEADLINE

CT 12356 - Noise Insulation Program Consulting ServicesThe City and County of San Francisco, through its Airport Commission, has issued a solicitation for Noise Insulation Program Consulting Services under Contract No. 12356, seeking a qualified provider to administer and support the San Francisco International Airport’s Noise Insulation Program (NIP), which encompasses both FAA-funded and Airport-funded initiatives. The scope of work includes identifying eligible residential properties, planning and delivering noise insulation improvements, administering grants, coordinating the design and construction of upgrades, acquiring aviation easements in noise-impacted areas, preparing FAA reimbursement reports, conducting community outreach, maintaining program databases and communications tools, and supporting all phases of project delivery through closeout. The contractor must comply with federal and state noise control regulations, including the Federal Noise Control Act and California Title 21 regulations, as well as local requirements such as the Healthy Airport Ordinance, the Minimum Compensation Ordinance (Article 111 of the San Francisco Labor and Employment Code), and the Labor Peace/Card Check Rule (Rule 12.1, adopted February 7, 2023). Evaluation of proposals is based solely on technical merit, with no consideration of price, and is scored across four weighted factors: Description of Services Work Approach (100 points), Project Team and Qualifications (125 points), Past Projects (40 points), and References (10 points), totaling 275 points, with a minimum qualifications pass/fail gate required for eligibility. Oral interviews are optional and may add up to 212 additional points if conducted. The contract has an initial term of four years with a one-year option for extension, and a not-to-exceed value of $9,500,00.00 for the base term, with potential proportional increases if the extension is exercised. Proposers must submit detailed documentation including SBE participation plans, certifications on tax delinquency and debarment, a Trade Restriction Certification, and mandatory letters of commitment from key personnel dated within five days of the proposal deadline. Small Business Enterprise participation is required at a 5.12% goal, and failure to meet or demonstrate good faith efforts toward this goal renders a proposal non-responsive. Compliance with prompt payment rules mandates subcontractor payments within seven days of the contractor’s receipt of payment from the City, and monthly reports on SBE payments are required throughout the contract term. All proposals must be submitted via the Airport’s e-Procurement portal by August 13, 2026,

Procurement Services

POSTED

about 22 hours ago

DEADLINE

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation seeks a subcontractor to provide environmental site assessments, permitting support, and oversight of remediation activities to ensure adherence to regulatory requirements. The work involves evaluating environmental conditions at affected sites, navigating complex permitting processes, and monitoring remediation efforts to confirm compliance with applicable environmental standards. The scope is focused on supporting the Water System agency in Georgia to manage environmental liabilities and maintain regulatory alignment throughout project lifecycles. Performance of the work is expected to begin following the submission deadline of August 27, 2026, with no specified location for performance beyond the general jurisdiction of Georgia. The contract falls under NAICS code 541620, which classifies environmental consulting services, and is structured as a subcontract, indicating it is part of a broader project managed by another entity. There is no set-aside designation or point of contact provided, and interested parties must access details through the provided online portal to prepare their proposals.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Environmental Compliance and RemediationThe contract titled Environmental Compliance and Remediation requires the performance of comprehensive environmental assessments, ongoing monitoring, and active mitigation efforts focused on stormwater management, erosion control, and contamination prevention or cleanup. It is structured as a subcontract under NAICS code 541620, which pertains to environmental consulting services, and is issued by the state of Utah with a response deadline of July 30, 2026. The work must be performed in alignment with state and federal environmental regulations, with particular emphasis on protecting water quality, stabilizing soils, and addressing any existing or potential contamination incidents. The contract demands technical expertise in environmental fieldwork, data collection, regulatory compliance documentation, and the implementation of effective remediation strategies tailored to the site-specific conditions. All activities are expected to be conducted with precision and accountability, ensuring that environmental standards are not only met but maintained over the duration of the project.

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Conformance TestingThe contract seeks independent testing and inspection services to confirm that all delivered supplies fully comply with specified technical requirements, engineering drawings, and merchantable quality standards. The work involves verifying conformance at various stages of delivery to ensure that materials and components meet the stringent performance and safety benchmarks set by the Dallas Area Rapid Transit agency. The scope is focused on objective evaluation rather than manufacturing or supply, emphasizing third-party verification to uphold reliability and regulatory adherence. Interested parties must submit responses by July 24, 2026, with the opportunity posted on July 17, 2026. This is classified as a subcontract under NAICS code 541620, which pertains to administrative management and general management consulting services, indicating a focus on procedural and quality assurance oversight. The place of performance and point of contact details are not specified, but the contracting entity is the Texas-based Dallas Area Rapid Transit, requiring proposers to be prepared for potential on-site or remote inspection activities aligned with transit infrastructure standards.

Dallas Area Rapid Transit

POSTED

DEADLINE

Multimodal Integration & Accessibility DesignThe contract titled Multimodal Integration & Accessibility Design requires comprehensive planning and design services to ensure seamless connectivity between pedestrian, bicycle, and paratransit systems, with strict adherence to all Americans with Disabilities Act standards across every facility and access point. The work must guarantee universal accessibility, equitable mobility, and inclusive infrastructure that supports users of all abilities, integrating physical design, signage, wayfinding, and operational protocols to meet federal compliance requirements without exception. This subcontract is classified under NAICS code 541620 for engineering services and is managed by the Tennessee Engineering agency, with a response deadline of August 25, 2026. The project scope demands technical expertise in accessible transportation design, coordination with local transit authorities, and implementation of best practices for multimodal networks. While specific location details are not provided, performance will occur within Tennessee, and all deliverables must reflect a commitment to safety, accessibility, and system-wide interoperability for non-motorized and specialized transit users.

POSTED

DEADLINE

in about 1 month

Food Manufacturing Systems Implementation & Regulatory ComplianceThe contract requires the implementation of comprehensive food safety and regulatory compliance systems including HACCP, GMP, and SSOP, alongside full OSHA adherence, to support the activation of an assembly line within the PDC. The goal is to establish a fully compliant manufacturing environment that ensures product safety, worker protection, and alignment with federal standards, with all systems designed for seamless integration and operational readiness. The work must be completed under a subcontract arrangement, with strict deadlines requiring proposal submission by August 10, 2026, and the primary oversight is managed by Alcorn State University in Mississippi, under NAICS code 541620 for management consulting services.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

Technical Reporting & Data ManagementThe contract under the title Technical Reporting & Data Management involves the provision of formal test reports, comprehensive data analysis, and quality assurance reviews aligned with military or ASTM standards, ensuring all deliverables meet stringent governmental technical requirements. All results must be securely transmitted to government authorities using authorized systems such as WAWF, guaranteeing compliance with defense data handling protocols and confidentiality standards. The work is performed under a subcontract and falls under NAICS code 541620, classifying it within scientific and technical consulting services, with the Defense Logistics Agency acting as the contracting entity under the Department of Defense. The performance location and specific office details are not specified, but the deliverables are intended for federal defense use and must adhere to official military documentation formats.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Testing ServicesThe contract encompasses independent inspection, non-destructive testing, and environmental validation services specifically for cable reels used in aerospace applications, ensuring full compliance with stringent industry and defense standards. These services are designed to verify the integrity, performance, and durability of cable assemblies under operational conditions, covering all phases from receipt to final acceptance, with a focus on detecting defects without causing damage to the components. Performed under a subcontract arrangement by the Defense Logistics Agency on behalf of the Department of Defense, the work is governed by NAICS code 541620, indicating engineering and technical services related to scientific and technical consulting. The contract is scheduled for performance in a timeframe beginning July 2026, with no designated set-aside provisions, and the place of performance has not been specified, suggesting flexibility or multi-site execution. Quality assurance protocols must adhere to aerospace-grade requirements, and all testing procedures are expected to be thoroughly documented to support traceability and regulatory compliance.

Defense Logistics Agency

POSTED

DEADLINE

Greenhouse Gas (GHG) Emissions ReportingThe contract mandates the annual measurement and public reporting of Scope 1, 2, and 3 greenhouse gas emissions associated with contract-related operations under the Defense Logistics Agency, a division of the Department of Defense. This subcontract, classified under NAICS code 541620 for management consulting services, requires detailed tracking and transparent disclosure of emissions across direct operations, purchased energy, and the full value chain including upstream and downstream activities. The reporting must be conducted each year and made available to the public, ensuring accountability and alignment with broader environmental compliance goals. The contract was posted on July 17, 2026, and is linked to award SPE4A726F8839 with contract SPS4A724D0194, indicating it is part of an ongoing procurement effort under the DIBBS system. No specific place of performance or point of contact is provided, suggesting the scope is operational and performance-based rather than location-specific.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Transportation and Delivery LogisticsThe contract pertains to the transportation and delivery of packaged goods to DLA Distribution San Joaquin located in Tracy, California, with a zip code of 95304-5000. It is classified as a subcontract under NAICS code 484220, which corresponds to truck transportation of freight and related services. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and is managed by the Active Devices Division under the Department of Defense. All services must adhere strictly to established delivery protocols and invoicing procedures to ensure proper documentation and payment. The performance location is clearly defined, and the contractor is expected to meet all logistical requirements for timely, secure, and compliant transport of goods to the specified facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires the provision of military-standard packaging and marking services fully compliant with Defense Logistics Agency requirements for the shipment of defense-related materials. All packaging and labeling must adhere to stringent government specifications to ensure safe, traceable, and standardized transport across military supply chains, with performance specifically designated at Tracy, California, with a ZIP code of 95304-5000. The work is classified as a subcontract under NAICS code 561910, indicating it falls within the other support services category, and the awarding entity is the Active Devices Division of the Department of Defense. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and all contractors must be prepared to meet exacting DLA standards for durability, identification, and documentation during packaging and marking processes.

Packaging and Labeling Services

POSTED

DEADLINE

Electrical Connector Supply (NSN 5935-12-419-2729)The contract calls for the supply of eleven units of an electrical connector identified by NSN 5935-12-419-2729, which must meet all applicable MIL-SPEC standards for performance, durability, and environmental resilience. Each unit requires specific packaging and marking protocols to ensure traceability, compliance with military logistics standards, and readiness for immediate deployment. The product must be domestically produced, with all components and assembly originating in the United States to satisfy federal sourcing requirements. The place of performance is designated as Tracy, California, with delivery expected to meet the contractual timeline and quality assurance parameters outlined by the Department of Defense. This subcontract, issued under NAICS code 335313 for electrical component manufacturing, was posted on July 17, 2026, with a firm response deadline of July 31, 2026. The contracting activity is managed by the Active Devices Division of the Department of Defense, indicating direct relevance to defense systems and equipment. Bidders must demonstrate full compliance with military specifications and provide documentation proving domestic origin, packaging conformity, and adherence to federal procurement guidelines. Failure to meet any of these criteria will result in non-compliance, regardless of cost or technical merit.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Electromagnetic Relay SupplyThe contract calls for the supply of eight electromagnetic relays identified by NSN 5945015247731, all of which must fully comply with military specifications including proper lead finish marking and hazardous materials labeling as required for defense applications. The procurement is structured as a subcontract under the NAICS code 335314 and is managed by the Active Devices Division of the Department of Defense, with performance scheduled to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, giving suppliers a five-day window to submit proposals. The contract details are accessible through the DIBBS system, and while no set-aside designation is specified, adherence to technical and regulatory standards is mandatory to meet defense operational requirements.

Relay and Industrial Control Manufacturing

POSTED

DEADLINE

Electrical Connector Backshell ManufacturingThe contract requires the manufacture and supply of 174 electrical connector backshells designated as NSN 5935-01-244-4704 with part number M85049/60-2G20W, fully compliant with SAE AS85049/60 and AS85049F technical standards, and qualified on the Qualified Products List for Federal Supply Class 5935. All units must meet stringent military specifications for performance, durability, and interchangeability, ensuring compatibility with existing defense systems. The work is classified as a subcontract under NAICS code 334417, indicating the focus on other electrical component and equipment manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 31, 2026, and the place of performance is specified as Jacksonville, Florida, 32212-0103. The contracting activity falls under the Active Devices Division of the Department of Defense, reflecting the military nature of the requirement. Bidders must be prepared to demonstrate production capability, quality assurance, and adherence to all applicable defense standards, including QPL qualification, to be considered eligible for award. The contract seeks a reliable, qualified supplier capable of delivering certified components on schedule to support ongoing defense infrastructure needs.

Electronic Connector Manufacturing

POSTED

DEADLINE

Supply Chain and Logistics for NSN-Distributed ComponentsThis contract encompasses end-to-end logistics coordination, order fulfillment, and delivery of National Stock Number items under DPAS-rated orders, requiring precise inventory management and full integration with the Defense Business Information System. The work is focused on supporting Department of Defense requirements through efficient handling of critical components issued under elevated priority ratings, ensuring timely and compliant distribution. Performance is mandated to occur at the designated location in Jacksonville, Florida, with operations requiring real-time system alignment with DIBBS to maintain visibility and accountability across the supply chain. The contract is structured as a subcontract under NAICS code 484220, indicating a specialized freight transportation arrangement, with a solicitation window opening on July 17, 2026, and closing on July 22, 2026. While no set-aside designation is specified, the work is under the purview of the Active Devices Division and demands strict adherence to federal procurement protocols for defense-related logistics. The successful respondent must demonstrate capability in managing high-priority defense shipments, maintaining accurate inventory records, and synchronizing with government logistics platforms without disruption or delay.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services strictly aligned with MIL-STD-129 and Defense Logistics Agency packaging standards, ensuring all items are properly prepared for military logistics including hazard communication and standardized palletization. All work must meet exacting federal specifications for identification, durability, and traceability to support Department of Defense supply chain requirements. The solicitation is issued under NAICS code 423840 as a subcontract opportunity by the Active Devices Division of the Department of Defense, with performance expected at the Jacksonville, Florida location with ZIP code 32212-0103. Bids must be submitted by July 22, 2026, and the opportunity was posted on July 17, 2026, through the DIBBS platform, emphasizing adherence to military grade packaging protocols and compliance with all applicable defense logistics directives.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Precision Electromechanical Component ManufacturingThe contract calls for the manufacture of a precision switch actuator adapter meeting military specifications under NSN 5930002969618, requiring strict adherence to materials, dimensional tolerances, and performance standards as defined for defense-grade electromechanical components. The work must comply with all relevant technical requirements to ensure reliability and interoperability in military systems, with the product intended for use in critical applications where precision and durability are non-negotiable. The subcontract is issued by the Active Devices Division of the Department of Defense, and performance is specified to occur at Jacksonville, Florida, with a zip code of 32212-0103. The solicitation was posted on July 17, 2026, with a response deadline of July 22, 2026, indicating a short window for qualified suppliers to submit proposals. The North American Industry Classification System code 334516 classifies the work under the manufacturing of electromagnetic and electroacoustic devices, reinforcing the technical nature of the component. The contract type is listed as a subcontract, suggesting it may be part of a larger program or supply chain managed by a prime contractor. No set-aside designation is specified, meaning all eligible manufacturers may compete, and there is no designated point of contact listed in the provided data, requiring potential bidders to reference the official DIBBS portal for further submission details and documentation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Fixed Wire Resistor SupplyThe contract calls for the supply of one precision fixed wire resistor identified by NSN 5905010939439, designed to meet strict military specifications for integration into mission-critical electronic systems. The component must adhere to exact technical standards for performance, tolerances, and environmental robustness, with no deviations permitted in material composition, construction, or electrical characteristics. All units must be properly labeled in accordance with military marking requirements, ensuring traceability, authenticity, and compliance with defense logistics protocols. This is a subcontract issued by the Department of Defense’s Active Devices Division, with performance required at Fort Bliss, Texas, zip code 79918-0000. The solicitation was posted on July 17, 2026, and responses are due by July 22, 2026, leaving a narrow five-day window for submission. The NAICS code 334416 confirms the scope relates to semiconductor and other electronic component manufacturing. The procurement is non-competitive and does not specify any set-aside provisions, indicating it is open to eligible subcontractors capable of fulfilling the exacting technical and compliance demands of the defense supply chain.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Supply of MS3404D40-9S Receptacle Connector (NSN: 5935014495352)The contract outlines the procurement of a single critical electronic connector, part number MS3404D40-9S, a receptacle component designated with NSN 5935014495352, required to meet full military specification standards for performance, durability, and reliability in defense applications. Full traceability of materials and manufacturing processes is mandatory, ensuring compliance with defense quality and accountability protocols, and all units must be labeled in accordance with Department of Defense logistics requirements for proper identification and handling throughout the supply chain. The solicitation is issued as a subcontract under the NAICS code 334417, targeting specialized electronic component manufacturers capable of fulfilling stringent mil-spec obligations. The contract was posted on July 17, 2026, with responses due by July 22, 2026, and is managed by the Active Devices Division within the Department of Defense. Performance is to be delivered to an FPO address with ZIP code 96662, indicating shipment to a military fleet or overseas operational location. The procurement is not set aside for any specific contractor category, and while no point of contact is listed, the official solicitation can be accessed through the DIBBS platform, ensuring transparency and standardization in the bidding process for qualified subcontractors.

Electronic Connector Manufacturing

POSTED

DEADLINE

Secure Government Logistics & DeliveryThe contract requires coordination of the final shipment to DLA Distribution in New Cumberland, Pennsylvania, with terms based on FOB origin and destination acceptance, ensuring full compliance with MIL-STD-129 labeling standards and timely submission of documentation through the Wide Area WorkFlow system. The logistics operation must adhere to strict government protocols for packaging, marking, and delivery verification, with responsibility for end-to-end shipment management from origin to final delivery point. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 484220 for truck transportation, with a response deadline of July 22, 2026, and posted on July 17, 2026. The place of performance is specifically designated as New Cumberland, PA, with a ZIP code of 17070-5002, and all activities must align with federal defense logistics requirements. While no point of contact is listed, the solicitation is accessible via the DIBBS portal, and bidders must ensure complete adherence to all government shipping and documentation mandates.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Compliance & Safety DataThe contract requires identification of hazardous materials within components or packaging, accurate preparation of Safety Data Sheets (SDS), and full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001. All work must ensure that hazardous material information is properly documented, standardized, and accessible to meet federal safety and reporting requirements, particularly for defense-related supplies. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical site where services are to be rendered or coordinated. This is a subcontract under NAICS code 541620, which pertains to environmental consulting services, and it is issued by the Active Devices Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a strict response deadline of July 22, 2026, leaving a limited window for potential subcontractors to submit proposals. Compliance with both OSHA HCS and DFARS requirements is mandatory, emphasizing the need for precise documentation, timely updates to SDS, and adherence to defense-specific regulations governing hazardous substances. The absence of a set-aside designation suggests the opportunity is open to all qualified subcontractors regardless of business size or status.

Environmental Consulting Services

POSTED

DEADLINE