Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance & SDS Management

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Defense Logistics Agency under the Department of Defense focuses on Hazardous Materials Compliance and SDS Management. The primary scope of work involves the preparation and submission of Safety Data Sheets to ensure full compliance with OSHA HCS and Federal Standard No. 313 regarding hazardous materials found in products or packaging. Classified under NAICS code 541690, the agreement establishes the necessary regulatory standards for handling and documenting hazardous substances. The contract is managed through the Defense Logistics Agency to maintain safety and legal adherence for materials utilized within their supply chain.

General Info

DLA subcontract for hazardous materials compliance and Safety Data Sheet management services.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541690 - Other Scientific and Technical Consulting Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-26-T-5316.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INDICATOR, AIRCRAFT,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and submission of Safety Data Sheets (SDS) and compliance with OSHA HCS and Federal Standard No. 313 for hazardous materials in product or packaging.

Similar Contracts

Same NAICS industry code

DBE Subconsultant Opportunity – AARC Consultants

Solicitation # dbe-subconsultant-opportunity-aarc-consultants

AARC Consultants, a certified SBE, WBE, and MBE, is seeking qualified Disadvantaged Business Enterprises and other eligible small businesses for subcontracting opportunities. The project involves providing Business Impact Analysis, Disaster Recovery, and Business Continuity Plan Services for the Inland Empire Utilities Agency under RFP number RFP-VC-26-006. The work will be performed in California and falls under NAICS code 541690. This solicitation is open to various certified entities, including SBA Small Businesses, Women-Owned Small Businesses, SAM.gov designated Small Disadvantaged Businesses, and DOT-certified Disadvantaged Business Enterprises. Interested parties must submit their responses by the deadline of November 17, 2026. Primary inquiries regarding this opportunity should be directed to Jason Richards.

AARC Consultants, LLC

POSTED

about 6 hours ago

DEADLINE

RFP Consulting Services Cardiologist (26-27047)

Solicitation # 26-27047

The Department of Health Care Access and Information (HCAI) is seeking a consulting cardiologist to support the California Cardiovascular Outcomes Reporting Program (CCORP). The selected consultant will provide expertise on the Society of Thoracic Surgeons Adult Cardiac Surgery Database (STS ACSD) and CCORP data elements, as well as the interpretation of patient medical records. This support is essential for HCAI to fulfill its mandate under Health and Safety Code sections 128745-128750, which requires the annual publication of risk-adjusted outcomes reports for approximately 124 California licensed hospitals performing CABG surgery. Key deliverables include participating in up to six Clinical Advisory Panel Meetings to provide guidance on data element coding, analysis, and risk-adjusted model building. The contract term is scheduled from November 27, 2026, through July 31, 2029, with a secondary reference to a term ending December 17, 2029. To be eligible, bidders must hold a current California medical license in good standing, provide board certification in cardiology or cardiovascular surgery, and demonstrate at least three years of experience in medical record review and two years of experience with clinical registries such as the STS National Database or NCDR. Award will be granted to the lowest responsive and responsible bidder, with evaluation weights split equally between credentials/experience and cost. Administrative requirements include maintaining commercial general liability insurance of at least $1,000,000 per occurrence and adhering to strict data security protocols, including the signing of confidentiality statements and completion of security awareness training. Invoices are to be submitted monthly in arrears on the contractor's letterhead. The agreement is subject to budget appropriation and may be terminated if sufficient funds are not provided in the state budget act. Proposals must be submitted via email by November 27, 2026, and must include all required certifications, a curriculum vitae, and documentation of board certification.

Health Care Access and Informa

POSTED

about 13 hours ago

DEADLINE

in about 1 month

2027 Primary Care Officer Grant Support

Solicitation # QQ-130497

The Virginia Department of Health is soliciting a Scientist Contractor to serve as a Deputy Shortage Designation Manager for the Virginia Primary Care Office. The primary objective is to support the national update of Health Professional Shortage Areas scheduled for September 2025. Key responsibilities include utilizing the federal Shortage Designation Management System to edit census tract boundaries and contiguous areas based on the 2020 Decennial Census, managing over 250 HPSA designations, performing annual attestations for approximately 10,000 provider records, and assisting Federally Qualified Health Centers with concurrent updates. Additionally, the contractor will manage grant deliverables, including a statewide needs assessment, and provide technical assistance for National Health Service Corps site applications. The contract is valued at a maximum threshold of 78,000 dollars for 1,200 annual hours, billed at a rate of 65.00 dollars per hour. Award priority is given to DSBSD-certified micro and small businesses, with the contract being awarded to the lowest responsive and responsible bidder. Performance is subject to strict compliance with HIPAA and PII data privacy regulations, and personnel must undergo background checks. Bidders must submit their proposals as a single PDF via the eVA platform and certify compliance with ethics, non-discrimination, and immigration laws. Invoicing is handled through specific VDH channels, with payments under 10,000 dollars eligible for the Small Purchase Charge Card.

Virginia Department of Health

POSTED

about 16 hours ago

DEADLINE

Healthcare Outcomes & ROI AnalystThis subcontract opportunity for a Healthcare Outcomes and ROI Analyst supports prime contractors working on projects for the Oklahoma Office of Management and Enterprise Services. The selected provider will be responsible for establishing data-collection structures and performing critical analyses, including return on investment, feasibility, patient outcomes, and cost avoidance. Additionally, the role involves creating documentation-of-care standards and delivering comprehensive outcome-measurement frameworks and ROI reports. Technical requirements for the project include proficiency in data validation using tools such as Tableau, SAS, or SPSS. The contract falls under NAICS code 541690. Interested parties should note the response deadline of November 18, 2026, for this Oklahoma state agency initiative.

Oklahoma Office of Management and Enterprise Services

POSTED

about 17 hours ago

DEADLINE

IT Security & Compliance ConsultantLOFT Community Services is seeking an IT Security and Compliance Consultant for a subcontracting role to perform security assessments and compliance audits for prime contractors. The primary objective is to evaluate the technical and security capabilities of a proposed ERP platform to ensure all outcomes are transparent, defensible, and auditable. The selected consultant must possess specialized expertise in Canadian privacy standards as well as SOC2 or similar security frameworks to deliver a comprehensive security assessment report and compliance certification. This opportunity was posted on October 22, 2026, with a response deadline of November 18, 2026. The work is categorized under NAICS code 541690 and will be performed within Canada. Interested parties can find further details through the Ontario Tenders portal.

LOFT Community Services

POSTED

about 17 hours ago

DEADLINE

Data Scientist / Waste Characterization AnalystThis subcontract opportunity is for a Data Scientist or Waste Characterization Analyst to support prime contractors on projects for Seattle Public Utilities. The selected party will be responsible for analyzing large solid waste datasets to determine density, capture rates, and the prevalence of banned materials. Technical requirements include the use of R or Python to develop production-ready, well-annotated code, with version control managed through GitHub to ensure replication and transparency. The primary deliverables consist of annotated code and comprehensive longitudinal trend assessments. Interested parties must submit their responses by November 13, 2026. This engagement falls under NAICS code 541690 and focuses on providing specialized data analysis to improve waste management insights for the agency.

Seattle Public Utilities

POSTED

about 20 hours ago

DEADLINE

General Subject Matter Expertise SupportThis subcontract opportunity, titled General Subject Matter Expertise Support, is issued by the Department of Homeland Security under the Mitigation SECTION(MIT60). The contract seeks to provide prime contractors with specialized technical expertise to support FEMA NFIP operations, specifically focusing on flood insurance law and FEMA regulations. Selected providers will deliver expert analysis, advisory services, technical memos, and advisory reports to ensure regulatory compliance and operational efficiency. Performance for this contract will take place in Washington, and candidates are required to possess advanced degrees or professional certifications in public policy, hydrology, or insurance. Interested parties must submit their responses by December 10, 2026. The procurement falls under NAICS code 541690, reflecting the requirement for specialized scientific and technical consulting services.

Mitigation SECTION(MIT60)

POSTED

about 24 hours ago

DEADLINE

in about 2 months

Energy Financing & Performance ConsultingThe Energy Financing and Performance Consulting subcontract, issued by the Department of Defense under the W6QM Micc Tsc agency, focuses on providing specialized energy auditing and financial structuring for prime contractors working on Army Installation Management Command projects. The primary objective is the development of Energy Savings Performance Contracts and Utility Energy Service Contracts specifically designed to fund critical HVAC upgrades. The scope of work includes calculating the return on investment for energy-efficient systems and establishing a comprehensive, executable funding and resourcing model to support a five-year plan. This effort falls under NAICS code 541690, with a response deadline set for November 30, 2026.

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Safety Program ManagementThis Small Business Set Aside subcontract for Safety Program Management supports prime contractors on Air Force Test Center facility projects at the Arnold Engineering Development Center. The scope of work focuses on facility safety inspections and hazard abatement, requiring the performance of 425 annual inspections, detailed hazard investigations, and quarterly traffic surveys. To ensure professional oversight, the contractor must possess a Certified Safety Professional certification or an equivalent credential. Administrative requirements include the delivery of monthly inspection reports and quarterly traffic surveys in accordance with CDRL A054. The contract is managed under NAICS code 541690 and is issued through the Department of Defense via the AEDC Procurement Branch.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

about 24 hours ago

DEADLINE

Programmatic Data Management and AnalyticsThe Programmatic Data Management and Analytics subcontract, issued by the Department of Defense under agency W40M USA Hca, focuses on data extraction and performance metrics analysis for prime contractors supporting Army Recovery Care Program projects. The scope of work involves mining enterprise metrics from the Army Recovery Care System and the Medical Operations Data System, Warrior Transition, to evaluate program effectiveness through the analysis of Soldier data, population strengths, and length of stay. Key deliverables include the production of programmatic analysis reports. Due to the nature of the data involved, personnel are required to maintain HIPAA compliance and possess a Public Trust clearance. This opportunity falls under NAICS code 541690, with a response deadline set for November 2, 2026.

POSTED

about 24 hours ago

DEADLINE

MCAG 2026 Regional Transportation Plan/Sustainable Communities Strategy (RTP/SCS)

Solicitation # MCAG 2026 RTP SCS

The Merced County Association of Governments is preparing the 2026 Regional Transportation Plan and Sustainable Communities Strategy to comply with state and federal mandates including the California Government Code, the Bipartisan Infrastructure Law, MAP-21, the FAST Acts, the California Global Warming Solutions Act of 2006, and Senate Bill 375. This plan integrates all transportation modes—motor vehicles, transit, commuter and interregional rail, freight movement via rail and trucking, bicycle and pedestrian infrastructure, aviation, and transportation systems management—while aligning with air quality conformity requirements under federal regulations and long-term sustainability goals through the horizon year of 2049. The effort ensures coordinated planning that reduces greenhouse gas emissions and promotes equitable, efficient, and resilient mobility across Merced County. The contract is listed as a forecast under the agency name Merced County Association of Governments with primary point of contact Meg Prince, Principal Planner, reachable via email and phone, and secondary contact Georgiena M. Vivian of VRPA Technologies. No solicitation number or set-aside details are provided, and the plan is accessible through the CEQA Net project portal. The work is grounded in statutory obligations from both state and federal legislation, requiring comprehensive data analysis, public engagement, and inter-agency coordination to meet evolving transportation and environmental benchmarks. The plan will serve as the foundational document guiding regional investment and policy decisions for the next two decades.

Merced County Association of Governments

POSTED

DEADLINE

Regional Accessibility Consulting ServicesThe Regional Accessibility Consulting Services subcontract supports prime contractors on New York State Department of Health OHIP projects across six distinct regions. The selected provider will deliver localized accessibility expertise by conducting on-site visits, coordinating with local medical practitioners, and performing detailed bid analyses to ensure compliance with state-mandated standards and local building codes. Qualified candidates must hold professional licensure in Architecture, Occupational Therapy, or Physical Therapy. The primary deliverables include regional site assessment data and the verification of contractor bids. This opportunity is associated with NAICS code 541690 and has a response deadline of December 1, 2026.

NYS Department of Health

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for Face Plate Assemblies to support prime contractors on aerospace contracts. The scope of work requires strict adherence to MIL-STD-2073-1E (QWP001) for packaging and MIL-STD-129 for marking, specifically including Special Marking Code 32 to denote a 60-month shelf life. Additionally, the provider must palletize all shipments according to RP001 requirements to ensure they are delivery-ready. The performance of these services will take place in Fort Worth, Texas, under NAICS code 488510. Interested parties should note that the response deadline for this opportunity is October 29, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Specialized Material Supply for Face Plate AssemblyThis subcontract involves the supply of raw materials to prime contractors for the manufacture of Face Plate Assemblies under Defense Logistics Agency aerospace contracts. The supplier is responsible for sourcing materials in strict accordance with TDP Rev C Gen 3 and all applicable reference drawings, with a mandatory requirement to ensure that no Class I Ozone Depleting Chemicals are used in the process. The scope of work includes providing comprehensive material certifications and Mill test reports to verify quality and compliance. All certified raw materials must be delivered directly to the designated fabrication facility located in Fort Worth, Texas. This effort falls under NAICS code 332710 and supports Department of Defense aerospace requirements.

POSTED

about 19 hours ago

DEADLINE

Face Plate Assembly ManufacturingThis subcontract for the Defense Logistics Agency involves the precision fabrication and assembly of 121,000 Face Plate Assemblies. The work must be performed in accordance with TDP Rev C Gen 3 and Basic Drawing 81361 806881-05 Rev F, with the place of performance located in Fort Worth, Texas. The scope of work includes the execution of both Contractor First Article Testing and Production Lot Testing to ensure technical compliance. To qualify for this contract, the provider must maintain SAE AS9100 quality systems and hold CMMC Level 2 certification. The project falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supplier of Black Sealing Compound (NSN 8030-12-356-0738)This subcontract involves the supply of black sealing compound, identified by NSN 8030-12-356-0738, to prime contractors supporting Defense Logistics Agency contracts for the US Army at Hunter Army Airfield. The requirement consists of two 310ml units of the compound, which must be maintained in climate-controlled storage between 41 and 77 degrees Fahrenheit. The supplier must adhere to strict regulatory and shipping standards, including MIL-STD-2073-1E, MIL-STD-129, RP001, and IP025 for hazardous materials. Additionally, the contract mandates compliance with 29 CFR 1910.1200 and NIST SP 800-171 security standards. This opportunity falls under NAICS code 332410 and is managed through the Department of Defense.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves providing specialized waterproof, greaseproof, and opaque UV-protected packaging for cylinders to prevent material deterioration. The service provider is responsible for applying all necessary markings, including CAGE codes and part numbers, in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverable consists of fully packaged and marked cylinders that are ready for immediate shipment.

Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

Oxygen Cleaning and Hydrostatic Testing ServicesThis subcontract for Oxygen Cleaning and Hydrostatic Testing Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves performing specialized oxygen cleaning, periodic re-hydrotesting, and valve overhauls utilizing hydrostatic pressure testing equipment. All processes must strictly adhere to MIL-STD-1330E standards for the cleaning and packaging of oxygen systems to ensure safety and compliance. The selected provider is responsible for delivering certified clean and hydro-tested cylinders accompanied by detailed test reports. This requirement falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of October 28, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Diving Air Cylinder Assembly SupplierThis subcontract involves the supply of five specialized air cylinder assemblies for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4220-01-451-6470 and Part Number 4059311. Critical compliance requirements include ensuring all assemblies are asbestos-free in accordance with FED-STD-313 and providing a Certificate of Conformance as mandated by FAR 52.246-15. The project falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Traceable Freight Transport (Annville, PA)This subcontract involves the transport of heavy industrial steel materials for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the hauling of 12-foot steel bars, weighing approximately 42.73 lb/ft, using flatbed or specialized industrial equipment. All shipments must be traceable and delivered to a government facility located in Annville, Pennsylvania, by the specified delivery date. The opportunity is categorized under NAICS code 484220 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 2, 2026. Performance of the contract will take place in Annville, Pennsylvania, zip code 17003-0000.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Supplier of 4140 Cold Finished Steel BarThis subcontract involves the supply of 4140 cold finished, round, and annealed steel composite metal bars to prime contractors supporting Defense Logistics Agency supply contracts. The required materials must have a 4.000 inch diameter and lengths between 10 and 12 feet, and must be delivered with Mill-Material Certification. Performance for this contract will take place in Annville, Pennsylvania, under NAICS code 331110. To be eligible, suppliers must maintain a QSLD listing for FSGs 95 and 96. The contract mandates strict adherence to several regulatory and quality standards, including the Buy American Act, the Berry Amendment, MIL-STD-129, and ASTM A700. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 19 hours ago

DEADLINE

Valve Hydrostatic Testing and Quality ValidationThis subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Industrial Wear Coating ServicesThis subcontract for Industrial Wear Coating Services involves the application of specialized wear coatings to four 12-inch gate valves for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes surface preparation and coating application in strict accordance with the technical data package, with a specific prohibition on the use of Class I Ozone Depleting Chemicals. Performance will take place in Norfolk, Virginia. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. To ensure quality and security, the provider must maintain ISO 9001 or AS9003 quality standards and strictly comply with ITAR and EAR export control regulations. Responses to this solicitation are due by November 2, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 19 hours ago

DEADLINE

Gate Valve Casting and FabricationThis small business set-aside subcontract through the Defense Logistics Agency involves the primary manufacture of four 12-inch gate valves for prime contractors. The scope of work includes developing tooling for metal casting, casting valve bodies according to specific basic and reference drawings, and performing precision drilling without the use of sealing compounds. The final deliverable consists of four fully machined and identified valve assemblies. Performance will take place in Norfolk, Virginia, under NAICS code 332510. Due to the handling of ITAR and EAR data, the contractor must maintain CMMC Level 2 and JCP certifications. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS