Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Compliance and SDS Management

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Identification, classification, and submission of Safety Data Sheets (SDS) for hazardous materials used in transformer production or packaging, ensuring OSHA and military compliance.

Similar Contracts

Same NAICS industry code

Environmental Site Assessment and Remediation

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Underground Storage Tank (UST) Compliance Services at Miramar National Cemetery

Solicitation # 36C78626Q50227

The National Cemetery Administration under the Department of Veterans Affairs is seeking service-disabled veteran-owned small businesses to provide Underground Storage Tank (UST) Compliance Services at Miramar National Cemetery in San Diego, California. The contractor must supply all labor, equipment, materials, and supervision necessary to conduct state-mandated inspections of underground fuel storage tanks, perform leak monitoring certification, implement overfill prevention measures, and deliver required training. The procurement is strictly limited to 100 percent service-disabled veteran-owned small businesses, with the NAICS code 541620 and a size standard of $19 million in annual revenue. The contract is expected to be awarded on a firm fixed price basis with a base year and four one-year option periods, and all offerors must hold their quoted prices firm for 60 days following the solicitation’s closing. A mandatory site visit is scheduled for August 10, 2026, at 10:00 AM PST at the Administrative Building of Miramar National Cemetery, and attendance requires pre-registration by August 7, 2026, at 3:00 PM PST via email to the designated contracting officers. All questions regarding the solicitation must be submitted by August 12, 2026, at 2:00 PM PST to the provided email address, with responses issued through amendments posted on SAM.gov, the only platform where the solicitation and related documents can be accessed. Proposals must include complete pricing for all CLINs with annual subtotals for the base period and each option year, along with a grand total, and submissions are due by August 17, 2026, at 5:00 PM PST. Failure to comply with submission instructions or missing documentation will result in disqualification.

National Cemetery Administration (36C786)

POSTED

about 7 hours ago

DEADLINE

Village 5 & Special Use District B Draft Partially Reciculuated EIRThe City of Lincoln is seeking to annex approximately 2,721.42 acres of unincorporated territory to expand its municipal boundaries and extend essential services to support planned residential, commercial, and public recreational development. This proposed annexation is part of a broader effort to integrate the area into the city’s infrastructure, ensuring access to utilities, public safety, zoning enforcement, and park systems. The initiative is tied to the Village 5 & Special Use District B Draft Partially Recirculated EIR, indicating that environmental review is underway to assess impacts and mitigate concerns related to land use changes and development patterns. The planning and community development departments of Lincoln are leading the effort, with direct contact provided by the Planning Manager and Community Development Director for inquiries and coordination. The project is being managed through official California environmental review channels, as evidenced by the link to the CEQA Net project database, and involves coordination with regional stakeholders, including Placer County’s Executive Director. Although the solicitation does not specify a contract award or funding mechanism, the public documentation and point of contact details suggest an active and transparent process aimed at securing community input before finalizing the annexation. The proposed change is designed to promote orderly growth, enhance service delivery, and align land use with the city’s long-term development goals, particularly in areas identified for future housing and economic activity.

City of Lincoln

POSTED

about 12 hours ago

DEADLINE

Environmental and Right-of-Way Survey SupportThe contract titled Environmental and Right-of-Way Survey Support is a subcontract under the NAICS code 541620, issued by the Metropolitan Atlanta Rapid Transit Authority through its Georgia office. It requires the contractor to provide specialized survey services to support environmental assessments and right-of-way acquisition efforts, with a focus on identifying encroachments, easements, and environmental constraints using precise survey data. The work is essential to ensuring compliance with regulatory requirements and facilitating the development of transit infrastructure projects by clearly mapping land use boundaries and ecological limitations. The solicitation was posted on August 4, 2026, with a response deadline of September 16, 2026, at 1:00 PM, and performance will occur within the jurisdiction of the transmitting agency, though specific location details are not provided. The contract does not specify a set-aside designation and is accessible through the Georgia state procurement portal.

Metropolitan Atlanta Rapid Transit Authority

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Environmental Remediation ServicesThe contract under the title Environmental Remediation Services seeks qualified subcontractors to perform soil and groundwater testing, develop remediation plans, and submit regulatory compliance reports for sites managed by the Board of Regents of the University System of Georgia. The work is classified under NAICS code 541620, indicating environmental consulting and remediation services, and is structured as a subcontract opportunity with no set-aside designation. Performance is anticipated to occur within Georgia, though specific locations are not defined, requiring vendors to be prepared to address multiple potential sites under the university system's jurisdiction. The solicitation was posted on August 4, 2026, with responses due by August 25, 2026, giving potential bidders approximately three weeks to prepare and submit proposals. While no point of contact is listed, interested parties are directed to the provided online portal for additional details and submission instructions. Compliance with environmental regulations and the ability to deliver accurate, defensible data and reports are critical to meeting the requirements of this effort.

Board Of(university System of Georgia) Regents

POSTED

about 21 hours ago

DEADLINE

Environmental and Site Compliance SupportThe contract titled Environmental and Site Compliance Support focuses on providing essential environmental services during construction activities within a state park in Hawaii, specifically ensuring adherence to environmental regulations. Key responsibilities include implementing erosion control measures, managing and disposing of construction waste in compliance with environmental standards, and safeguarding natural resources such as native flora, fauna, water bodies, and sensitive habitats. The work is governed by NAICS code 541620, indicating it involves environmental consulting and related services, and is structured as a subcontract, likely supporting a larger construction or development project under the oversight of the Department of Land & Natural Resources in Hawaii. The solicitation was posted on August 4, 2026, with a response deadline set for August 25, 2026, giving potential contractors a three-week window to submit proposals. While the exact location within the state park is not specified, the performance site is confined to Hawaii, and no set-aside preferences or eligibility criteria are indicated. There is no designated point of contact provided in the data, and the official link directs interested parties to the Hawaii eProcurement portal for full details and submission instructions. The contract emphasizes strict environmental accountability and practical on-the-ground mitigation strategies to minimize ecological disruption during construction operations.

Department of Land & Natural Resources

POSTED

about 21 hours ago

DEADLINE

Biosecurity & Inspection Compliance ServicesThe contract seeks third-party services to perform biosecurity inspections, sampling, and verification procedures to confirm that fish, water sources, and equipment are free from aquatic invasive species and reportable diseases in accordance with California Department of Fish and Wildlife regulations. This work includes systematic sampling protocols, laboratory analysis where required, and comprehensive documentation to ensure regulatory compliance across all operations under the scope of the agreement. Services must be delivered in alignment with CDFW standards, with all findings reported accurately and timely to support enforcement and prevention efforts. The contract is classified as a subcontract under NAICS code 541620, and responses are due by August 19, 2026, with the solicitation posted on August 4, 2026. Performance is expected to occur within California, though specific locations are not detailed, and all activities must adhere to state biosecurity protocols to safeguard native aquatic ecosystems.

California Department of Fish & Wildlife

POSTED

about 21 hours ago

DEADLINE

Lead-Based Paint Inspection & Hazard Mitigation Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Environmental Site Assessment and Monitoring

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) Management

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Radioactive Materials Handling & Labeling (If Applicable)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 2 hours ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract is for the procurement of 11 electrical connector receptacles with part number 2583A-125 and NSN 5935-01-524-0367, supplied by PAULUHN ELECTRIC MANUFACTURING LLP under solicitation SPE7M1-26-U-5053. Delivery is required within 57 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA DIRECT, CONUS, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted. The unit of issue is each, with a total price of $11.00, and the contract includes strict requirements for removal of government identification from non-accepted supplies and bare item marking. All packaging and labeling must align with the specified QUP of 001 and DLA unit of issue guidelines.

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 2 hours ago

DEADLINE

COIL, ELECTRICAL

Solicitation # SPE7M1-26-T-250E

The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M1-26-Q-1336

This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-T-250B

This contract covers the procurement of a fluid filter element identified by NSN 4330012808418 and part number F64318, with approved suppliers including Falls Filtration Technologies Inc., Wix Corp, Honeywell International Inc, Donaldson Company Inc, and Genuine Parts Company. The item is classified as a critical application and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The unit of issue is each, with a contract quantity of two units to be delivered within 20 days from the award date, FOB origin, under Solicitation SPE7M1-26-T-250B. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling governed by these standards. Shipping must occur via the fastest traceable method, excluding parcel post, and all deliveries must be directed to the specified address at Aberdeen Proving Ground, Maryland. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required delivery date is August 3, 2026, and the contract includes a government-only point of contact and tracking identifiers for logistics and accountability.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

CIRCUIT BREAKER

Solicitation # SPE7M1-26-U-5050

The contract solicits 134 units of a circuit breaker identified by NSN 5925-01-430-2318 under solicitation number SPE7M1-26-U-5050, with a response deadline of August 20, 2026, and a required delivery within 99 days of award. The item is classified as a commercial item description, eliminating the need for a Form 239 and enabling competitive procurement using data available through the drawing repository referencing the CID number and NSN. All supply requirements must comply with the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The contracting activity falls under the Department of Defense’s Maritime Supply Chain, with primary point of contact Bryan Fair reachable via email and phone. The solicitation is posted on DIBBS, and performance is expected within U.S. territory.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE