Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Hazardous Materials Handling and Compliance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Federal
Respirator Fit Testing
Solicitation # 36C24527Q0051
The Department of Veterans Affairs is seeking a contractor to provide industrial hygiene support for the Louis A. Johnson Medical Center in Clarksburg, West Virginia. The primary objective is to conduct quantitative respirator fit testing for approximately 700 to 1,000 employees. The contractor is responsible for providing all necessary equipment, including at least two TSI PortaCount machines to ensure efficient throughput, as well as all required consumables. Additionally, the contractor must provide Controlled Air Purifying Respirators (CAPRs) for staff who cannot use N95 respirators and may be required to provide training on CAPRs and qualitative fit testing techniques. The contract follows a base period from November 23, 2026, to November 22, 2027, with multiple option periods extending the potential performance through November 2030. Services must be performed Monday through Friday, with staggered hours to accommodate second and third shifts, and the contractor must maintain a response time of 24 to 48 hours during outbreak conditions. All work must strictly adhere to OSHA Respiratory Protection Standard 29 CFR 1910.134 and other applicable environmental and safety standards. Award will be based on a comparative evaluation of the most advantageous offer, with the government evaluating the total price of the basic requirement plus all options. The contractor must comply with stringent information security and confidentiality requirements, particularly regarding the protection of VA medical records under Title 38 U.S.C. and VA Cybersecurity Program directives. Payment will be processed via electronic funds transfer, and the contractor must maintain all required certifications and licenses throughout the period of performance.
245-NETWORK Contract Office 5 (36C245)

POSTED

about 16 hours ago

DEADLINE

in about 16 hours

AI Contract Overview

Show more

This contract, titled Hazardous Materials Handling and Compliance, is a Women-Owned Small Business Set-Aside subcontract issued by the ASC Commodities Division under the Department of Defense, with a NAICS code of 541690 for other professional, scientific, and technical services. It requires full compliance with OSHA and Defense Logistics Agency standards for the management of hazardous materials, including the accurate generation of Safety Data Sheets and proper labeling of all regulated substances. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and offers are due by July 22, 2026, following a posting date of July 14, 2026. All work must meet federal safety and environmental regulations, with an emphasis on documentation integrity and workplace safety protocols to ensure adherence to federal mandates.

General Info

Women-owned small business subcontract for hazardous materials handling in New Cumberland, PA, due July 22, 2026.

NAICS

541690 - Other Scientific and Technical Consulting Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

WOSB

Documents

This scope was carved out of SPE4A6-26-T-06EA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

METER, FLOW RATE INDICA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure compliance with OSHA and DLA requirements for hazardous materials, including SDS generation and proper labeling if applicable.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-13XC
The contract solicitation SPE4A6-26-T-13XC seeks six retaining rings, NSN 5325-01-109-1952, to be delivered within five days after award to the 2nd Supply Depot in Busan, South Korea under FOB Origin terms. Compliance with stringent quality, packaging, and cybersecurity standards is mandatory, with inspections and acceptance occurring at the manufacturer’s origin as specified under RQ009. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in sample lots unless otherwise stated, and unspecified attributes are treated as major with an AQL of 1.0. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001, using Level B packaging with preservation method 20 (CLNG/DRY) and marking per MIL-STD-129 and MIL-STD-130N, though Item Unique Identification is not required. Export control restrictions apply under ITAR and EAR, limiting technical data access to contractors with approved JCP certification, completion of DLA export training, and prior DLA authorization; DFARS 252.225-7048 governs disclosure to foreign persons. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and contractor systems must meet NIST SP 800-171 requirements with safeguarding provisions under DFARS 252.204-7012 and FAR 52.240-93. Configuration change management, deviation requests, and removal of government identification from rejected items are mandated. Invoicing must be processed through WAWF, and socioeconomic representations including small business status are required under FAR 52.219-28 Alternate I and related clauses. Hazardous materials must be labeled per 252.223-7001 in accordance with OSHA standards, with exceptions for regulated products. All submissions must be made via DIBBS by the deadline, with offerors required to disclose UEI and CAGE codes if providing covered defense telecommunications equipment, and affirmative representations triggering compliance with nonmanufacturer rules or joint venture disclosures. While pricing details are not provided, the contract enforces accelerated payments to small business subcontractors and prohibits unauthorized obligations.
Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-33FC
Solicitation SPE4A6-26-T-33FC is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 295 shear bolts, identified by NSN 5306001515705. The items must be manufactured in accordance with the current revision of the applicable part standard, specifically NAS624 through NAS644. Delivery is required within 169 days, with a need ship date of March 17, 2027, and an original required delivery date of June 7, 2027. Shipping is FOB Origin, with the final destination being DLA Distribution Jacksonville, Florida. The contract mandates strict quality and technical compliance, including the submission of a Certificate of Quality Compliance and adherence to QAP EQ003. Dimensional conformance for Class 3A and 3B threads must be inspected per System 22 of FED-STD-H28/20. Sampling will be conducted according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances. Packaging must comply with RP001 and MIL-STD-129, and any hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. A price evaluation preference is available for SBA-certified HUBZone small business concerns, and the government will not evaluate offers utilizing additive manufacturing processes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRU
Solicitation # SPE4A6-26-T-22JT
Solicitation SPE4A6-26-T-22JT is a small business set-aside fixed-price contract issued by the DLA Aviation ASC Commodities Division for the procurement of eight thrust washer bearings, identified by NSN 3120-01-491-8558. The requirement specifies a delivery timeline of 157 days after the order, with a need ship date of February 7, 2027, and a final delivery destination at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The contract incorporates stringent technical and quality requirements from the DLA Master List, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with CMMC Level 2 cybersecurity standards. Evaluation preferences are available for HUBZone small business concerns, and the government will not consider offers utilizing additive manufacturing unless specifically authorized.
Ball and Roller Bearing Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS