Top

Hazardous Materials Handling and Labeling

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Identify, label, and document hazardous materials per 29 CFR 1910.1200 and FAR 52.223-7, including submission of MSDS and hazard warning labels.

Similar Contracts

Same NAICS industry code

NAICS: 562910

New

SLED

Eradication and Control of Invasive Aquatic Plant Species in CT Bodies of WaterThis contract covers the comprehensive management of invasive aquatic plant species across Connecticut’s water bodies, encompassing a range of services including aquatic herbicide application, mechanical harvesting, hand-pulling, installation of benthic barriers, monitoring, mapping, inspections, consultation, and detailed reporting. The scope is designed to support eradication, suppression, and long-term control efforts while ensuring environmental compliance and ecological stewardship. Services may be performed by qualified contractors under the authority of the Connecticut Department of Energy and Environmental Protection, with eligibility extended to other state agencies, municipalities, and political subdivisions upon authorization. The solicitation, identified as 26PSX0139, was posted on July 28, 2026, with responses due by August 18, 2026. It is administered through Connecticut’s DAS Procurement office and applies statewide wherever invasive aquatic plants pose a threat to native ecosystems, recreation, or water infrastructure. Primary contact for inquiries is Eva Orlinski, reachable via email at eva.orlinski@ct.gov. All work must be conducted within Connecticut’s water bodies, and the contract is intended for use by eligible public entities seeking to fulfill their regulatory and environmental management obligations related to invasive aquatic vegetation.

POSTED

DEADLINE

The Franklin County Board of Supervisors is reques ng sealed proposals from qualified contractors to provide Emergency Disaster Debris Removal Services in response to the tornado that impacted Franklin County on May 6, 2026. (Federal Disaster Declara onThe Franklin County Board of Supervisors is seeking qualified contractors to provide emergency debris removal services following a tornado that struck the county on May 6, 2026, under a federal disaster declaration. Contractors must submit sealed proposals by the August 14, 2026 deadline to respond to the solicitation numbered 128-20260727132922 FCBS, which is open to qualified firms capable of handling large-scale disaster recovery operations. The work will take place within Franklin County, Mississippi, and contractors will be expected to mobilize quickly, comply with federal and state disaster response protocols, and safely remove, transport, and dispose of debris generated by the storm. The solicitation is managed under the Mississippi Public Transportation and Affairs Program, and all bids must be submitted through the official state portal, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

DEADLINE

Annual Asbestos And Lead Paint Abatement Services Contract

POSTED

DEADLINE

Animal Carcass Disposal and Rendering ServicesThe contract seeks a subcontractor to receive and properly dispose of large animal carcasses using approved methods such as composting, burial, or rendering, ensuring full compliance with environmental and public health regulations. Services must be conducted in accordance with state and federal guidelines to prevent contamination and safeguard natural resources. The work is tied to the Texas Department of Transportation and is expected to support animal carcass management efforts related to transportation incidents or emergency scenarios across the state. The solicitation was posted on July 28, 2026, with responses due by August 18, 2026, and falls under NAICS code 562910 for other waste management services. While the specific location of performance is not detailed, the work is anticipated to occur throughout Texas under the oversight of the Texas Department of Transportation. The contract is structured as a subcontract, and no set-aside provisions or small business preferences are indicated. All interested parties must adhere to regulatory standards and operational protocols to ensure safe, lawful, and environmentally responsible carcass disposal.

Texas Department of Transportation

POSTED

DEADLINE

Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures necessary during construction activities to ensure compliance with environmental regulations. It requires the installation of silt fences, straw wattles, and inlet protection systems designed to prevent soil erosion and sediment runoff into nearby waterways. These measures are critical for maintaining water quality and meeting federal environmental standards throughout the project lifecycle. The work is classified under NAICS code 562910, which corresponds to remediation and other environmental services, indicating a focus on environmental protection and site restoration tasks. This is a subcontract awarded under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, ensuring opportunities for qualified small firms to participate in federal environmental infrastructure projects. The solicitation was posted on July 28, 2026, with a response deadline of August 14, 2026, at 3:00 p.m. The contracting agency is the Department of Commerce, specifically NOAA, though the precise location of performance is not specified, suggesting the work may occur at multiple sites under NOAA’s jurisdiction. The contract emphasizes environmental compliance, requiring strict adherence to best management practices for sediment control during construction phases.

Department Of Commerce Noaa

POSTED

DEADLINE

Fuel Removal at Sector Humboldt Bay Fuel Farm

POSTED

DEADLINE

F108--Mold Remediation: Lyons Campus Building 10 Server RoomThe solicitation for mold remediation at the Lyons Campus Building 10 Server Room, identified by number 36C24226Q0677, is a 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside under NAICS code 562910 with a size standard of $25.0 million. The work is located at the Veterans Affairs New Jersey Health Care System, 151 Knollcroft Road, Lyons, New Jersey 07939, and must be completed within 30 days. The contractor is responsible for providing all labor, supervision, materials, equipment, supplies, sanitized and labeled containers, transportation, facilities, and waste manifests. Scope of work includes establishing containment prior to remediation, cleaning and treating affected surfaces with antimicrobial solutions, applying sporicidal disinfectants, HEPA vacuuming, using antimicrobial coatings and cleaners to inhibit future mold growth, and applying a binding encapsulant with microband as needed. Final acceptance requires negative results from air clearance testing before removal and disposal of contaminants. The estimated contract value ranges between $25,000 and $100,000. All offerors must be registered in SAM.gov and verified as an SDVOSB through www.vip.vetbiz.va.gov at the time of submission and prior to award. Proposals must be submitted electronically; faxed or hand-delivered submissions are prohibited. The solicitation was posted on June 4, 2026, with a response deadline of June 9, 2026, at 10:00 a.m. Eastern Time. The contracting office is the Department of Veterans Affairs Network Contracting Office 02, with Lateisha Robinson as the primary point of contact. All additional details, including evaluation factors, contract clauses, and submission instructions, are to be contained in the full solicitation, which was expected to be released on or about June 12, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

K3E35-241220B - Consulting Services for Hydrometric Monitoring StationThe contract involves consulting services for the FSCAP classification, decommissioning, and reclamation of a creosote-contaminated hydrometric monitoring station located in Racehorse Creek, Alberta, alongside the design and construction of a new passenger-operated cableway. The work is being procured by Environment and Climate Change Canada’s National Hydrological Services under the Federal Contaminated Sites Action Plan to address environmental contamination and restore site functionality. All activities must adhere to federal environmental standards, with a focus on safe removal of contaminants, site reclamation, and the implementation of a durable, accessible cableway for operational use. The solicitation, issued under reference WS5174762016 and titled K3E35-241220B, was posted on July 6, 2026, with a strict bid submission deadline of July 30, 2026, at 2:00 PM Eastern Time. Late proposals will not be accepted under any circumstance. The contract is managed by the Government of Canada through Public Services and Procurement Canada, with Colin Simard listed as the primary point of contact for inquiries. Performance of the work is specifically required at the hydrometric station site in Alberta, and all bidders must ensure their proposals meet technical, environmental, and safety requirements without exception.

Department of Public Works and Government Services

POSTED

DEADLINE

Radioactive Materials Handling and Labeling Compliance

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CATS Fuel Treating and Cleaning of Diesel Storage TanksThe City of Charlotte, through its Charlotte Area Transit System (CATS) Facilities department, is seeking a vendor to provide fuel treating and cleaning services for eight diesel underground storage tanks located across two sites in the Charlotte metro area. The scope includes biocide treatments to prevent microbial growth, thorough tank cleaning to remove contaminants and sediment, and regular fuel sample testing to ensure fuel quality and compliance with operational standards. Services must be performed with strict adherence to environmental and safety regulations to safeguard the integrity of the fuel supply and storage infrastructure. All work is to be completed at the designated CATS facilities within North Carolina, with no alternative locations permitted. The solicitation, identified by number 269-2026-1974, was posted on July 27, 2026, and responses are due by August 24, 2026, at 7:00 PM eastern time. The contract opportunity is open to qualified service providers with demonstrated experience in diesel UST maintenance, fuel conditioning, and laboratory-grade fuel analysis. Andre Branch of the CATS Facilities department is the primary point of contact for inquiries and must be reached via email at andra.branch@charlottenc.gov. Prospective bidders are directed to the Bonfire Hub platform for full solicitation details and submission requirements.

POSTED

DEADLINE

Environmental Remediation (Asbestos-Related Work)The contract requires the performance of environmental remediation activities related to the removal of HVAC systems, with specific focus on asbestos handling in compliance with federal and state regulations. Work must include thorough asbestos testing, installation of proper containment measures, abatement procedures, and safe disposal of hazardous materials, all aligned with EPA, OSHA, and Florida Department of Environmental Protection standards. This subcontract is part of a larger initiative managed by the Florida Department of Transportation, with performance expected to occur within the state of Florida, though exact location details are not specified. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, at 6:30 PM. The NAICS code 562910 classifies this work under Other Remediation Services, indicating specialized environmental cleanup expertise is necessary. Bidders must be prepared to demonstrate full regulatory compliance, qualified personnel, and appropriate equipment for asbestos abatement operations.

Florida Department of Transportation

POSTED

DEADLINE

Hazardous Materials Handling and Safety ComplianceThe contract requires comprehensive handling, labeling, and documentation of hazardous materials on-site at a location in Boston, Massachusetts, with strict adherence to federal OSHA standards and Massachusetts Right-to-Know Law. All materials must be properly identified, stored, and labeled according to regulatory requirements, and complete Material Safety Data Sheets or Safety Data Sheets must be submitted and maintained in compliance with legal mandates. The work involves consistent operational diligence to ensure workplace safety and regulatory compliance, with responsibilities extending to accurate recordkeeping and timely reporting of hazardous substance information. This is a subcontract solicited by the Massachusetts Procurement Agency under NAICS code 562910, with a response deadline of August 12, 2026, at 5:00 PM. The solicitation was posted on July 27, 2026, and the performance location is specified as Boston with a zip code of 02201. No set-aside type is designated, and the contract does not include a designated point of contact. All potential bidders must ensure full alignment with both state and federal hazardous materials regulations to meet the terms of performance and compliance obligations.

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

NAICS: 334112

New

DIBBS

APPLICATOR, DISPOSABThe contract pertains to the procurement of disposable applicators under NSN 7045-01-555-8210, with a single box containing 500 units, sourced from FISHER SCIENTIFIC COMPANY LLC in Pittsburgh, PA. The solicitation, identified as SPE8EN-26-T-2717, was posted on July 28, 2026, with responses due by August 10, 2026, and delivery required within 20 days of award. The item falls under NAICS code 334112 and is managed by the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, with performance based in Yorktown, VA, 23691. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with provisions for revision control based on acquisition size and amendment timing. Strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds apply to the product, except in specific exempted cases such as functional mercury in batteries, fluorescent lights, instrument sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shock-proof with a secondary containment barrier as per NAVSEA 5100-003D. No approved technical data package exists for this NSN, and requests to the DLA Troop Support Technical Data Support Team are to be avoided. The primary point of contact is Jennifer Esworthy, reachable via email and phone, and further details are available through the DIBBS system.

Computer Storage Device Manufacturing

POSTED

DEADLINE

SIGNAL ASSEMBLY, SWIThis contract pertains to the procurement of 14 units of a Signal Assembly, Switchboard with NSN 5805-01-606-8303, to be delivered FOB origin within 76 days of contract award, with a required ship date of October 26, 2026, and an original delivery date of October 8, 2026. The contract enforces strict compliance with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, containment types, and marking per MIL-STD-129 with no special marking code. The item is subject to zero variance in quantity and will be inspected and accepted at the destination, with delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents as specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and documentation requirements for source approval and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements apply. The contract is issued under SPE8EN-26-T-2731, falls under NAICS code 334210, and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with primary point of contact Jennifer Esworthy.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

TAPE, PRESSURE SENSIThe contract specifies the procurement of 2 rolling units of pressure-sensitive tape, each 180 feet long and 2 inches wide, identified by NSN 7510-01-553-3457 and part number 743-BLK-2. The item is classified as a Type I (Code K) shelf-life item with a fixed 18-month shelf life that cannot be extended, and vendor responsibility includes proper labeling and dating prior to delivery. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life, and palletization must follow DLA packaging requirements. All shipments must be delivered FOB origin within 20 days of contract award, using traceable freight methods—parcel post is prohibited—and delivered to the specified Marine Aviation Logistics Squadron at MCAS New River, North Carolina. The material is subject to technical and quality requirements incorporated from the DLA Master List, and covered defense information provisions apply. The purchase request number is 7017643770, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery must be completed by July 24, 2026, and the contract is issued under solicitation SPE8EN-26-T-2708, with vendor details and government use codes provided for administrative tracking.

Stationery Product Manufacturing

POSTED

DEADLINE

DONGLEThis contract specifies the procurement of five dongles with NSN 7025-01-660-7946 under solicitation SPE8EN-26-T-2724, requiring delivery within ten days FOB origin to Fort Bragg, North Carolina. All supplies must comply with the DLA Master List of Technical and Quality Requirements, superseding any general standards like ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, including palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA, with portable fluorescent lamps and instruments containing mercury required to be shockproof and equipped with a secondary containment boundary per NAVSEA 5100-003D. The unit of issue is each, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Shipment must be transmitted via the fastest traceable means, excluding parcel post, and all packaging must be properly marked and labeled. The contract includes specific government use codes and delivery instructions, with the point of contact for inquiries being Jennifer Esworthy at the Defense Logistics Agency.

Computer Storage Device Manufacturing

POSTED

DEADLINE

TAPE, PRESSURE SENSIThis contract specifies the procurement of 36 rolls of pressure-sensitive tape, identified as a commercial off the shelf item with part number 7000049597 from 3M Company, measuring one inch wide by 72 yards long in blue. The item is governed by strictly defined technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and it carries a non-extendable 24-month shelf life under Type I, Code M classification. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including labeling with the manufacturing date and expiration date per RS016 and special marking code 32. The tape is subject to inspection and acceptance at the destination, with zero variance allowed in quantity. Delivery is required within 20 days to Marine Corps Air Station Yuma, with shipping instructions mandating traceable transport methods and prohibiting parcel post. Packaging must adhere to MIL-STD-129 marking standards, and palletization must follow DLA guidelines. The contract is issued under solicitation SPE8EN-26-T-2707 with an NSN of 7510016794381 and a total quantity of 36 rolls, each roll priced individually with a total contract value based on the stated unit price. The required delivery date is July 24, 2026, and the contract is managed by Jennifer Esworthy of the Department of Defense, with all documentation tied to official DLA processes and systems.

Stationery Product Manufacturing

POSTED

DEADLINE

HUB, NETWORKThe contract pertains to the procurement of five units of a network hub identified by NSN 7035-01-563-7103 under solicitation SPE8EN-26-T-2713, with a required delivery within 20 days from the award date. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s RP001 guidelines. The item must not contain mercury or mercury-containing compounds except for specific functional applications如 batteries, fluorescent lights, or instrument components as authorized by NAVSEA, and those exceptions must be shockproof with secondary containment per NAVSEA 5100-003D. The delivery address is Fort Hood, Texas, to the 0015 CS BN CO A DISTRIBUTION unit, and shipping must be via traceable means, excluding parcel post. The unit of issue is each, with no variance allowed in quantity, and the contract includes specific marking requirements including the traceable control number W45J6653490128 and project code TP 3. Government-specific tags and identifiers are included for internal tracking and distribution purposes. This procurement is governed by the Department of Defense’s acquisition standards, with technical and quality requirements referenced from the DLA Master List, accessible online, and the revision in effect on the solicitation issue date controls compliance. The supplier must ensure all materials are free from unauthorized mercury and conform to all DLA packaging and marking protocols. The contract value is $25.00 at $5.00 per unit, and the point of contact for inquiries is Jennifer Esworthy. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the original required delivery date is December 18, 2025. The North American Industry Classification System code is 334515, indicating classification under communications equipment manufacturing, and the contract is issued under federal procurement guidelines with no set-aside restrictions. The item is to be delivered to a U.S. Army installation with strict controls on handling, marking, and documentation for government use.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

DISK DRIVE UNITThe contract mandates the supply of a disk drive unit under solicitation SPE8EN-26-T-2706 with a single unit requirement for each of two distinct delivery locations: USS Essex LHD 2 and USS Ronald Reagan CVN 76, both to be delivered within 20 days of award with zero tolerance for quantity variance. The item, identified by NSN 7025-01-690-7230 and part number FRU-00416, must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking guidelines, and palletization must align with DLA Packaging Requirements. All shipments must use traceable freight methods, prohibit parcel post, and be directed to designated FPO addresses via vessel shipment under DLAD procedural notes. The contract explicitly forbids the intentional use of mercury or mercury-containing compounds in any supplied hardware, except for specific functional applications approved under NAVSEA 5100-003D, which require additional containment measures. Compliance with Cybersecurity Maturity Model Certification Level 2 is required through self-assessment, and documentation for source approval must be submitted per applicable requirements. The supplier must adhere to DLA’s unit of issue standards and provide goods in compliance with the DLA Master List of Technical and Quality Requirements referenced in the contract, with all deliveries due no later than July 24, 2026.

Computer Storage Device Manufacturing

POSTED

DEADLINE

COMPUTER, DIGITALThis contract is for the procurement of five units of a digital computer, specifically the GETAC B360 model identified by NSN 7021-01-698-6789, under solicitation SPE8EN-26-T-2723. The delivery is required within five days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization follows DLA packaging standards, and the item must be shipped to Joint Base Elmendorf-Richardson in Alaska. The contract prohibits intentional addition of mercury or mercury-containing compounds to the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Documentation requirements for source approval and technical quality standards referenced through R and I numbers from the DLA Master List are incorporated by reference, with revisions governed by the solicitation or award date depending on acquisition type. The unit of issue is each, priced at $5 per unit for a total value of $25. The delivery deadline is January 6, 2026, and the point of contact for inquiries is Jennifer Esworthy of the Department of Defense, with additional government-only tracking codes applied for logistics and distribution purposes.

Electronic Computer Manufacturing

POSTED

DEADLINE

CLEANING KIT, OPTICAThe contract pertains to the procurement of a single unit of a Cleaning Kit, Optica, identified by NSN 6760-01-678-6313, under solicitation number SPE8EN-26-T-2725. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The product may involve covered defense information, requiring appropriate handling and safeguarding measures. Delivery is expected within 20 days after award, with the solicitation issued on July 28, 2026, and responses due by August 10, 2026. The procurement falls under NAICS code 333310 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided, and all details can be accessed through the DIBBS portal.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

DISPLAY UNITThe contract is for the procurement of a single DISPLAY UNIT with NSN 7025-01-646-3579 under solicitation SPE8EN-26-T-2716, requiring delivery within five days FOB destination. The item must comply with stringent military packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. The supplier must ensure no intentional introduction of mercury or mercury-containing compounds into the product except for exempted uses such as batteries, fluorescent lamps, or specific instruments, and any portable devices containing mercury must include a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is EA, and quantities are fixed with zero variance allowed. Delivery is directed to the FPO address in Hawaii, with the shipment origin being Yokosuka, Japan, and transportation governed by DLAD procedural notes C19 and C20. The contract mandates inspection and acceptance occur at the destination, and the supplier must comply with all applicable Defense Logistics Agency regulations, including government-specific identifiers and shipment tracking codes. The purchase request is 7017646361, and the contract was posted with a response deadline of August 10, 2026, with an original delivery requirement of January 15, 2026.

Computer Storage Device Manufacturing

POSTED

DEADLINE

INTERCOMMUNICATIONThis contract, issued under solicitation number SPE8EN-26-T-2734 by the Defense Logistics Agency, pertains to the procurement of six units of Vertex Standard/Yaesu UK LTD model KG964 P/N VLH-3000A, identified by NSN 5830-99-754-0572, with a unit price of $6.00 and a total value of $36.00. Delivery is required FOB origin within 20 days of award, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, containment types, and marking per MIL-STD-129, with no special marking required. Palletization must adhere to DLA packaging requirements, and the freight forwarder is DF Young Inc. with delivery directed to the Egyptian Navy Armament Department in Alexandria, Egypt. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The contract is classified under NAICS 334310 and administered by the Department of Defense, with primary point of contact Jennifer Esworthy.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

SCREEN, PROJECTIONThe contract pertains to the procurement of a single unit of a projection screen identified by NSN 6730-01-671-2649 under solicitation SPE8EN-26-T-2721, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Covered Defense Information provisions may apply, and source approval documentation must be submitted as required. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 333310 for manufacturing optical, measuring, and medical equipment. The contracting activity is under the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact for inquiries.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days

View Details