Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Handling and Safety Compliance

Active

State & Local

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive handling, labeling, and documentation of hazardous materials on-site at a location in Boston, Massachusetts, with strict adherence to federal OSHA standards and Massachusetts Right-to-Know Law. All materials must be properly identified, stored, and labeled according to regulatory requirements, and complete Material Safety Data Sheets or Safety Data Sheets must be submitted and maintained in compliance with legal mandates. The work involves consistent operational diligence to ensure workplace safety and regulatory compliance, with responsibilities extending to accurate recordkeeping and timely reporting of hazardous substance information. This is a subcontract solicited by the Massachusetts Procurement Agency under NAICS code 562910, with a response deadline of August 12, 2026, at 5:00 PM. The solicitation was posted on July 27, 2026, and the performance location is specified as Boston with a zip code of 02201. No set-aside type is designated, and the contract does not include a designated point of contact. All potential bidders must ensure full alignment with both state and federal hazardous materials regulations to meet the terms of performance and compliance obligations.

General Info

Handle, label, and document hazardous materials in Boston per OSHA and Massachusetts Right-to-Know Law.

Agency

Massachusetts → 143 - ProcurementView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Boston, MA, 02201, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → 143 - Procurement

ContactsNo contacts available

OfficeN/A

Organization / Agency

Massachusetts → 143 - Procurement

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Handling, labeling, and documentation of hazardous materials on-site, including submission of MSDS/SDS per OSHA and MA Right-to-Know Law.

Similar Contracts

Same NAICS industry code

F108--Mold Remediation: Lyons Campus Building 10 Server RoomThe solicitation for mold remediation at the Lyons Campus Building 10 Server Room, identified by number 36C24226Q0677, is a 100% Service-Disabled Veteran Owned Small Business (SDVOSB) set-aside under NAICS code 562910 with a size standard of $25.0 million. The work is located at the Veterans Affairs New Jersey Health Care System, 151 Knollcroft Road, Lyons, New Jersey 07939, and must be completed within 30 days. The contractor is responsible for providing all labor, supervision, materials, equipment, supplies, sanitized and labeled containers, transportation, facilities, and waste manifests. Scope of work includes establishing containment prior to remediation, cleaning and treating affected surfaces with antimicrobial solutions, applying sporicidal disinfectants, HEPA vacuuming, using antimicrobial coatings and cleaners to inhibit future mold growth, and applying a binding encapsulant with microband as needed. Final acceptance requires negative results from air clearance testing before removal and disposal of contaminants. The estimated contract value ranges between $25,000 and $100,000. All offerors must be registered in SAM.gov and verified as an SDVOSB through www.vip.vetbiz.va.gov at the time of submission and prior to award. Proposals must be submitted electronically; faxed or hand-delivered submissions are prohibited. The solicitation was posted on June 4, 2026, with a response deadline of June 9, 2026, at 10:00 a.m. Eastern Time. The contracting office is the Department of Veterans Affairs Network Contracting Office 02, with Lateisha Robinson as the primary point of contact. All additional details, including evaluation factors, contract clauses, and submission instructions, are to be contained in the full solicitation, which was expected to be released on or about June 12, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 12 hours ago

DEADLINE

CATS Fuel Treating and Cleaning of Diesel Storage TanksThe City of Charlotte, through its Charlotte Area Transit System (CATS) Facilities department, is seeking a vendor to provide fuel treating and cleaning services for eight diesel underground storage tanks located across two sites in the Charlotte metro area. The scope includes biocide treatments to prevent microbial growth, thorough tank cleaning to remove contaminants and sediment, and regular fuel sample testing to ensure fuel quality and compliance with operational standards. Services must be performed with strict adherence to environmental and safety regulations to safeguard the integrity of the fuel supply and storage infrastructure. All work is to be completed at the designated CATS facilities within North Carolina, with no alternative locations permitted. The solicitation, identified by number 269-2026-1974, was posted on July 27, 2026, and responses are due by August 24, 2026, at 7:00 PM eastern time. The contract opportunity is open to qualified service providers with demonstrated experience in diesel UST maintenance, fuel conditioning, and laboratory-grade fuel analysis. Andre Branch of the CATS Facilities department is the primary point of contact for inquiries and must be reached via email at andra.branch@charlottenc.gov. Prospective bidders are directed to the Bonfire Hub platform for full solicitation details and submission requirements.

City Of Charlotte

POSTED

DEADLINE

Environmental Remediation (Asbestos-Related Work)The contract requires the performance of environmental remediation activities related to the removal of HVAC systems, with specific focus on asbestos handling in compliance with federal and state regulations. Work must include thorough asbestos testing, installation of proper containment measures, abatement procedures, and safe disposal of hazardous materials, all aligned with EPA, OSHA, and Florida Department of Environmental Protection standards. This subcontract is part of a larger initiative managed by the Florida Department of Transportation, with performance expected to occur within the state of Florida, though exact location details are not specified. The solicitation was posted on July 27, 2026, and responses are due by August 11, 2026, at 6:30 PM. The NAICS code 562910 classifies this work under Other Remediation Services, indicating specialized environmental cleanup expertise is necessary. Bidders must be prepared to demonstrate full regulatory compliance, qualified personnel, and appropriate equipment for asbestos abatement operations.

Florida Department of Transportation

POSTED

DEADLINE

Emergency On-Call Field CrewsThe City of Austin seeks subcontractors to provide 24/7 on-call field crew services for emergency water main breaks and urgent repairs across its service area. The contract requires immediate response capability at all times to ensure timely restoration of water service, minimize disruptions to public utilities, and maintain infrastructure integrity. Contractors must be prepared to mobilize crews, equipment, and materials around the clock to address urgent incidents regardless of time, day, or weather conditions. This subcontract, classified under NAICS code 562910, is open for response until September 3, 2026, with no set-aside provisions identified. Performance is expected within the jurisdiction of the City of Austin in Texas, and while specific geographic details are not defined, the work will focus on the city’s water distribution system. The solicitation was posted on July 27, 2026, and interested parties can access further information through the city’s official finance portal. Bidders must demonstrate proven capacity for emergency response, reliability, and compliance with all operational and safety standards expected by the city.

POSTED

DEADLINE

in about 1 month

Hazardous Materials Handling and Safety DataThe contract requires the identification, labeling, and proper management of hazardous materials including fuel, lubricants, and batteries used during the installation process, with strict adherence to safety protocols. The contractor must provide current Safety Data Sheets for all hazardous substances and maintain a comprehensive spill response plan to ensure rapid and effective containment and cleanup in the event of an incident. This subcontract is part of a Total Small Business Set-Aside under SBA guidelines, reserved exclusively for small businesses as defined by federal regulations, and is classified under NAICS code 562910 for waste collection and treatment services. Performance is required in Waco, Texas, with a response deadline of August 27, 2026, and the contracting authority is the Department of the Interior’s Mwr Midwest Region.

Mwr Midwest REGION(60000)

POSTED

DEADLINE

Media and Water Blasting for Corrosion RemovalThe contract requires media and water blasting services to remove corrosion and prepare metal surfaces on Aerospace Ground Equipment and Munitions Trailers to meet SSPC-SP 10/NACE No. 2 surface preparation standards, ensuring a near-white metal finish suitable for protective coatings. This effort is critical to maintaining the integrity and operational readiness of defense-related equipment by preventing further degradation and extending service life through proper surface conditioning. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, restricting eligibility to verified small businesses as defined by FAR 19.5. The work is tied to NAICS code 562910 for remediation services and will be performed at a location in Yigo, Guam with the ZIP code 96929. The opportunity was posted on July 27, 2026, and responses must be submitted by August 21, 2026, with the contracting activity under the Department of Defense’s FA5240 36 Cons Lgc office.

FA5240 36 Cons Lgc

POSTED

DEADLINE

Hazardous Materials Handling and ComplianceThe contract requires the management and proper labeling of hazardous materials utilized in maintenance operations, ensuring all substances are accurately identified and handled in accordance with established safety protocols. A critical component of the scope involves the timely submission of Safety Data Sheets for each hazardous material, providing essential information on handling, storage, emergency procedures, and disposal. Compliance with all applicable environmental regulations is mandatory, requiring ongoing adherence to federal, state, and local standards governing hazardous waste management and workplace safety. This subcontract, posted on July 27, 2026, with a response deadline of July 29, 2026, is classified under NAICS code 562910 for Other Remediation Services and is associated with the Department of Defense through the FA2860 316 Cons Pk office. The work is to be performed in St. James, and the contract does not specify a set-aside type or point of contact, indicating the opportunity is open to eligible subcontractors without reserved status. Proposals must be submitted before the deadline to be considered for award.

FA2860 316 Cons Pk

POSTED

DEADLINE

in about 20 hours

Environmental RemediationThe contract titled Environmental Remediation is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 562910 covering environmental remediation services. It requires the contractor to perform soil testing, hazardous material abatement, and associated permitting activities, all to be completed at a designated place of performance in Grandview, Missouri, with a ZIP code of 64030. The solicitation was posted on July 27, 2026, and responses are due by August 6, 2026, giving interested parties a ten-day window to submit proposals. The contracting agency is the Department of Commerce, specifically under NOAA, though no further office address or point of contact details are provided. This effort is focused on environmental compliance and site remediation, demanding expertise in regulatory permitting, safe handling of hazardous substances, and accurate soil analysis to meet federal environmental standards.

Department Of Commerce Noaa

POSTED

DEADLINE

F--(RAF/ESO) Ambler Asbestos Piles – Operable Unit 1The contract pertains to the F--(RAF/ESO) Ambler Asbestos Piles – Operable Unit 1 with solicitation number 68HE0326R0019, issued by the Environmental Protection Agency’s Region 3 Contracting Office in Philadelphia, Pennsylvania. The solicitation, posted on July 27, 2026, is categorized as a special notice under NAICS code 562910, indicating it relates to remediation and waste management services. The primary point of contact is Gregory Dotson, reachable via email and phone provided, with the response deadline now set for August 4, 2026, at 7:00 PM Eastern Time, following an extension from the original schedule. The government’s deadline for responding to bidder questions has also been revised to July 29, 2026, to provide adequate time for clarification prior to proposal submission. The place of performance remains unspecified in the data provided, and no set-aside provisions are indicated for this procurement.

Region 3 Contracting Office

POSTED

DEADLINE

Mold MitigationA site visit for the mold abatement and remediation contract is scheduled for 29 July at 9:50 AM at the Patrick Space Force Base Visitors Center, with attendance requiring prior email coordination with the point of contact listed in the CSS. The contract, identified by solicitation number FA252126QB132 and titled “Mold Mitigation,” is a total small business set-aside under FAR 19.5, targeting services to remediate mold and repair ceilings across approximately 14,400 square feet in Building 559 at Patrick SFB, Florida. Performance must be completed within 60 calendar days following award, with all work conducted on-site under FOB Destination terms and payment processed through the Wide Area WorkFlow system. The scope includes full mold mitigation, HVAC decontamination using HEPA filtration, surface cleaning with EPA-approved antimicrobials, application of mold inhibitors, post-remediation air testing, debris removal with documentation, and submission of preconstruction and closeout deliverables. Compliance is mandatory with EPA regulations, DoDM 5200.08v3, AFI 31-218, DAFFARS 5352.242-9000, AFMAN 31-101v3, and 29 CFR 1910.29 for signage and containment. Personnel must be certified in mold remediation and OSHA training, with supervisory staff meeting specific competency standards. Base access requires formal requests on company letterhead, issuance of identification and vehicle passes, and adherence to strict security protocols under DAFMAN 16-1405 and DoDM 5200.02. Contractors must provide waste dumpsters, manage disposal with verified tickets, notify the contracting officer 24 hours in advance of work activities, and preserve fire, electrical, and communication systems without disruption. All proposals must be submitted electronically to both the primary and secondary points of contact by 14:30 EST on 31 July 2026, and must include UEI, size status certification, compliance with FAR 52.203-18 and 52.209-11, and responses to all required representations. Evaluation will be based on price, technical performance, delivery timeline, and past performance as a combined trade-off, with no formal weighting or LPTA designation. The government

FA2521 45 Cons Pk

POSTED

DEADLINE

Munitions Response Actions at Vieques, Puerto Rico and Other SitesThis is a sources sought notice issued by NAVFAC Atlantic for market research purposes, not a solicitation for proposals, and no contract will be awarded based on responses. The Government is seeking qualified small businesses—including Service-Disabled Veteran-Owned, Veteran-Owned, Economically Disadvantaged Women-Owned, Women-Owned, Small Disadvantaged, and HUBZone businesses certified by the Small Business Administration—to assess market availability and capability for a potential cost-plus-award-fee, indefinite-delivery/indefinite-quantity (CPAF ID/IQ) contract for munitions response actions. The primary work location is Vieques, Puerto Rico, with potential global execution across NAVFAC’s area of responsibility, including the continental U.S., Caribbean, Europe, Africa, Southwest Asia, Hawaii, Far East, and Pacific regions. The North American Industry Classification System (NAICS) code is 562910, Environmental Remediation Services, with a small business size standard of 1,000 employees. The estimated total contract value over the five-year period—comprising a base period and four one-year options—is $95 million, with individual task orders typically valued at $10 million or more. The scope of work requires the contractor to provide all labor, equipment, materials, and supervision to conduct investigations, removal, and remedial actions for unexploded ordnance, discarded military munitions, and munitions constituents in both terrestrial and aquatic environments, in strict compliance with federal regulations including CERCLA, the National Contingency Plan, DERP, and Department of Defense Explosives Safety Board standards. Offerors must possess a Defense Contract Audit Agency-approved accounting system capable of supporting cost-reimbursable contracts and must demonstrate relevant experience in UXO/DMM response, hazardous materials handling, and operations in remote or challenging terrains. Only responses submitted via the official Sources Sought Capabilities Questionnaire in Times New Roman, 12-point font, in PDF or Word format, will be considered; no supplemental materials will be reviewed. Responses must be received by 14 August 2026 via email to the Contract Specialist, Elizabeth Eliason-Carey. Large businesses are ineligible, and no payment will be provided for responses. All submissions are confidential and used solely for acquisition planning; the Government retains the right to cancel the effort at any time without obligation or debrief.

Navfacsyscom Atlantic

POSTED

DEADLINE

Z--ASBESTOS AND LEAD PAINT ABATEMENT The National Park Service seeks a small business contractor to perform asbestos-containing material and lead-based paint abatement at four unoccupied residential structures and one accessory outbuilding within Cedar Creek and Belle Grove National Historical Park in Middletown, Virginia, with all structures scheduled for demolition following abatement. This is a competitive total small business set-aside acquisition under NAICS code 562910, with an estimated value between $100,000 and $250,000, to be awarded as a firm-fixed-price contract to the lowest-priced qualified offeror. The performance period is 60 calendar days from award, with work expected to commence on August 14, 2026, and conclude by October 26, 2026. All bidders must be registered in SAM.gov with a valid UEI and CAGE code, and must complete all required representations and certifications online. A mandatory site visit is scheduled for July 23, 2026, and all questions must be submitted by 2:00 PM ET on July 27, 2026. Proposals must be submitted electronically via email by 5:00 PM ET on July 31, 2026, and must include Attachment 3 containing the quote, bio-based certification, experience questionnaire, resumes, and certification copies for all proposed workers. The contractor must hold valid state certifications for both asbestos and lead abatement, and all hands-on personnel must possess current 32-hour asbestos and 16-hour lead abatement worker certifications. Technical evaluation emphasizes proven experience, including a minimum of seven years of abatement experience by the project manager, and past performance, with a trade-off process favoring the most advantageous offer considering both non-price factors and price. The contractor is required to comply with all federal, state, and EPA regulations, including OSHA’s Hazard Communication Standard and NESHAP requirements, and must submit a site-specific safety plan and Safety Data Sheets. Invoicing must be done electronically through the Department of the Treasury’s Invoice Processing Platform. The contractor must indemnify the government against all liabilities arising from performance, except where caused solely by government negligence, and must maintain strict confidentiality of all government-furnished information. Work will be inspected and accepted on-site by the Contracting Officer’s Representative, with final acceptance contingent upon compliance with all regulatory standards, including Virginia state thresholds for lead-based paint classification and the proper disposal of hazardous materials

Northeast Regional Contracting

POSTED

DEADLINE

More opportunities from Massachusetts → 143 - Procurement

Same awarding agency

Independent Audit and Records Access ComplianceThe contract requires the maintenance of comprehensive financial, performance, and compliance records for a period of seven years, ensuring full and unrestricted access for the City Auditor or any authorized agents to inspect, review, and audit these records as needed. This obligation applies to all aspects of the subcontract and is non-negotiable, forming a core compliance component that must be adhered to throughout the term of performance and beyond. The records must be kept in a manner that supports transparency, accountability, and timely verification by official auditors. This subcontract is issued under NAICS code 541211, falls under the jurisdiction of the Massachusetts agency Procurement, and is performance-based in Boston with a zip code of 02201. The solicitation was posted on July 27, 2026, with responses due by August 12, 2026. While no set-aside designation is specified, the requirement for record retention and audit access remains the central obligation, binding the contractor to maintain rigorous documentation standards aligned with municipal oversight protocols.

Offices of Certified Public Accountants

POSTED

DEADLINE

Minority- and Women-Owned Business Enterprise (MWBE) SubcontractingThis contract solicits subcontracting opportunities for certified Minority- and Women-Owned Business Enterprises across various trades within the construction industry, specifically under NAICS code 238210. The prime contractor is required to make good faith efforts to include MWBE firms in the project, in accordance with Boston Executive Order 1987, which mandates proactive outreach and meaningful participation by these businesses. The work is to be performed in Boston, with a response deadline of August 12, 2026, and the opportunity was posted on July 27, 2026, under the oversight of Massachusetts Procurement Office 143. Participation is open to firms certified as MWBEs, and compliance with the executive order’s goals is a condition of award and performance.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Prevailing Wage-Compliant Labor ServicesThe contract requires the provision of on-site labor services in strict compliance with the Massachusetts Prevailing Wage Law, ensuring that all workers are paid wages and benefits mandated by state regulations for the specific trade and location. Weekly BC-1A payroll reports must be accurately prepared and submitted to demonstrate adherence to these wage requirements, and all hiring practices must be non-discriminatory, promoting equal opportunity regardless of race, gender, ethnicity, or other protected characteristics. The labor services are to be performed at a designated worksite in Boston, Massachusetts, with a ZIP code of 02201, under a subcontract arrangement governed by NAICS code 238990, which pertains to other construction support activities. The solicitation was posted on July 27, 2026, with a firm deadline for responses on August 12, 2026, at 5:00 PM. Procurement is being managed by the Massachusetts agency under the identifier 143 Procurement, and while no set-aside provisions are specified, interested contractors must be prepared to meet all prevailing wage and reporting obligations without exception. Compliance with these standards is mandatory for contract award and performance, and failure to adhere to payroll reporting or wage standards may result in contract termination or penalties. All bidders must ensure they have the infrastructure and administrative capability to maintain accurate, timely records and to operate in full alignment with state labor laws.

All Other Specialty Trade Contractors

POSTED

DEADLINE

General Goods or Services SupplyThe contract titled General Goods or Services Supply is a subcontract issued by the Massachusetts agency under the 143 - Procurement office, with a place of performance in Boston, ZIP code 02201. It was posted on July 27, 2026, with a response deadline of August 12, 2026, and is governed by the North American Industry Classification System code 423420, indicating a wholesale trade classification. The procurement does not include a detailed purchase description or specifications, leaving the exact nature of the goods, services, or labor to be determined by the contractor, though compliance with applicable technical standards and the Uniform Commercial Code is required. All submissions must adhere to the general framework of UCC provisions to ensure enforceability and proper fulfillment of contractual obligations despite the absence of specific requirements. The absence of a point of contact and set-aside designation suggests a standard, open competition process without preference or restrictions based on business size or category.

Office Equipment Merchant Wholesalers

POSTED

DEADLINE

Compliance and Documentation SupportThe contract seeks administrative support for compliance reporting related to prevailing wage payroll submissions and documentation of MWBE subcontractor engagement, ensuring adherence to labor and minority business participation requirements. The work is tied to a subcontract under the NAICS code 541611 for management consulting services and is managed by the Massachusetts Procurement agency with performance based in Boston, zip code 02201. Interested parties must submit responses by August 12, 2026, at 5:00 PM, following a posting date of July 27, 2026. There is no specified set-aside designation, and the contract is open to eligible subcontractors capable of providing accurate, timely, and compliant documentation to meet state regulatory obligations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supplier of Specialty Hydraulic and Mechanical ComponentsThe contract seeks qualified suppliers to provide critical hydraulic and mechanical components including pumps, valves, hoses, and seals that comply with stringent municipal performance and durability standards applicable to public infrastructure systems in Boston. These components must be reliable, long-lasting, and engineered to meet the operational demands of municipal water, sanitation, and transportation networks, ensuring consistent service and minimizing maintenance disruptions. All submissions must demonstrate capability to deliver products that adhere to established technical specifications and quality control protocols required by the agency. This is a subcontract opportunity posted on July 27, 2026, with a response deadline of August 12, 2026, at 5:00 PM. The NAICS code 423830 identifies the procurement as part of the industrial machinery and equipment merchant wholesaling sector. The place of performance is designated as Boston with a ZIP code of 02201, indicating that delivered goods must be capable of supporting local infrastructure needs directly within the city. The contracting authority is listed as 143 - Procurement under the Massachusetts agency, and bidders must ensure their proposals align with the procurement’s technical, logistical, and compliance requirements without set-aside provisions being specified.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical and Control Systems IntegrationThe contract involves the installation of electrical wiring, control panels, warning systems, and the integration of lift controls with the vehicle dashboard for a hook lift truck, requiring precise technical coordination between vehicle systems and specialized lifting equipment. The work is scoped under NAICS code 238210, indicating it falls under electrical contracting, and the performance location is set in Boston with a zip code of 02201, suggesting on-site work at or near the city center. This is a subcontract opportunity posted on July 27, 2026, with a response deadline of August 12, 2026, and is managed by the Massachusetts agency identified as 143 - Procurement. The contract does not specify a set-aside classification or organization type, and no point of contact details are provided. Interested parties must submit responses through the provided CommBuys portal link before the deadline, ensuring all technical requirements for integration and safety systems are fully addressed.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Vehicle Body Fabrication and InstallationThe contract involves the custom fabrication and installation of a truck body or carrier system specifically engineered to securely transport municipal waste containers, including roll-off and containerized configurations. The work requires precision engineering to ensure compatibility with existing municipal fleet standards, durability under heavy use, and compliance with operational safety requirements for waste collection services. The fabrication must be tailored to meet the functional and structural demands of daily municipal waste handling in urban environments. Performance of the work is designated for Boston, Massachusetts, with a response deadline of August 12, 2026, and the solicitation was posted on July 27, 2026. This is classified as a subcontract under NAICS code 332999, indicating specialized manufacturing activities not covered by other categories. The contract falls under the purview of the Massachusetts agency designated as 143 - Procurement, with no set-aside provisions specified, meaning it is open to all qualified vendors regardless of business size or ownership status. The submission must be submitted through the provided online portal prior to the deadline to be considered.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Hydraulic Lift System Supply and IntegrationThe contract calls for the supply and integration of a certified hydraulic hook lift mechanism designed specifically for municipal waste containers, ensuring compatibility, reliability, and compliance with industry safety standards. The system must include pressure testing to verify structural integrity under operational loads and integrated safety interlocks to prevent accidental activation and protect personnel during loading and unloading cycles. All components must be installed and calibrated to meet exacting performance specifications, with full operational documentation provided to support training, maintenance, and compliance audits. The work is to be performed in Boston, Massachusetts, under a subcontract arrangement classified under NAICS code 333999 for other miscellaneous industrial machinery manufacturing. Bidders must submit proposals by the deadline of August 12, 2026, at 5:00 PM Eastern Time, with the opportunity arising from procurement efforts led by the Massachusetts agency identified as 143 - Procurement. The requirement focuses on delivering a turnkey solution that enhances municipal waste collection efficiency and safety, emphasizing the need for certified hardware, documented testing protocols, and seamless integration with existing container systems. There is no set-aside designation specified, and all qualified suppliers are invited to respond, with the understanding that delivery and performance must meet stringent technical and safety benchmarks to qualify for acceptance.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Six Wheel Hook Lift Truck Manufacturing and AssemblyThe contract calls for the design, fabrication, and assembly of a six-wheel hook lift truck tailored for municipal waste collection and service operations. The scope includes full integration of a robust chassis, installation of a certified hydraulic lifting system, secure mounting of the waste body, and rigorous compliance testing to ensure operational safety and regulatory adherence. All work must meet industry standards for durability, load capacity, and vehicle performance under municipal environmental conditions. The project is designated as a subcontract under NAICS code 336120 and is managed by the Massachusetts agency under the procurement office 143. Performance is required to occur in Boston, with a response deadline set for August 12, 2026. The truck must be built to support municipal workflows, emphasizing reliability, ease of maintenance, and compatibility with existing municipal infrastructure. Compliance with all applicable safety and engineering specifications is mandatory, and delivery must coincide with the timeline outlined in the solicitation.

Heavy Duty Truck Manufacturing

POSTED

DEADLINE

Specialty Trade Contractor (Electrical, Plumbing, HVAC)The contract is for specialty trade services in electrical, plumbing, and HVAC systems as part of broader construction efforts in Boston, with a NAICS code of 238210 indicating it is a subcontract under the procurement category for the Massachusetts agency. Work must be performed at a designated location in Boston with a ZIP code of 02201, and responses must be submitted by August 12, 2026, at 5:00 PM, following a posting date of July 27, 2026. The scope involves installation, maintenance, or repair of critical building systems required for construction projects, and participation is open to qualified specialty trade contractors without any specified set-aside preferences. All performance, compliance, and delivery obligations are tied to this specific location and timeline.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Payroll and Compliance Reporting ServicesThe contract involves the management of certified payroll reporting and compliance with applicable labor laws, requiring the weekly submission of accurate payroll records to the City of Boston to ensure adherence to state and federal regulations. Service providers must maintain rigorous documentation and reporting standards to confirm that all workers are paid in compliance with prevailing wage requirements and other statutory obligations, with timely and error-free submissions being critical to avoid penalties or disruptions to public projects. This is a subcontract under the NAICS code 541211 for accounting, tax preparation, bookkeeping, and payroll services, issued by the Massachusetts agency 143 - Procurement. The opportunity was posted on July 27, 2026, with proposals due by August 12, 2026, at 5:00 PM. Performance is designated for Boston, specifically within the 02201 zip code, and the contract focuses on supporting public works projects in the area through compliant payroll administration. The solicitation does not specify a set-aside classification, and no point of contact information is provided in the dataset.

Offices of Certified Public Accountants

POSTED

DEADLINE