Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Hazardous Materials Labeling Compliance

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires compliance with OSHA HAZCOM and GHS standards for the proper labeling of container packages containing hazardous materials, ensuring accurate hazard communication across all handled substances. The work is classified under NAICS code 541620 and is structured as a subcontract under the Department of Defense, specifically managed by CONSTRUCTION & EQUIPMENT CONTAINERS, with performance required at a location in Charlotte, North Carolina, 28208-5845. All labeling must meet federal regulatory requirements for identifying chemical hazards, including pictograms, signal words, hazard statements, and supplier information, to safeguard workers and ensure regulatory alignment. The solicitation was posted on August 9, 2026, with a deadline for responses on August 20, 2026, and is accessible through the DIBBS platform at the provided UI link.

General Info

Comply with OSHA HAZCOM and GHS labeling standards for hazardous materials at Charlotte, NC, under DoD subcontract.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

CHARLOTTE, NC, 28208-5845, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Labeling of container packages containing hazardous materials in compliance with OSHA HAZCOM (29 CFR 1910.1200) and GHS standards.

Similar Contracts

Same NAICS industry code

Hazardous Materials Compliance & LabelingThe contract requires the preparation and submission of globally harmonized system–compliant hazard warning labels and safety data sheets for hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard. All deliverables must meet regulatory requirements to accurately communicate chemical hazards to workers and downstream users, with strict adherence to formatting, content, and language standards mandated by 29 CFR 1910.1200. The work is classified as a subcontract under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental compliance and safety documentation. Performance is required at Tracy, California, with a zip code of 95304-5000, and the proposal submission deadline is August 20, 2026. The contract was posted on August 9, 2026, under the Department of Defense’s Construction & Equipment MRO SVC I procurement office, indicating its application within military or defense-related operations. While no set-aside designation is specified, the solicitation is accessible via the DIBBS platform, and responders must ensure timely and accurate delivery of all GHS-compliant documentation to satisfy federal safety and labeling obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data ManagementThe contract requires the identification and documentation of hazardous materials contained in delivered items, with a focus on ensuring full compliance with OSHA regulations. This includes the accurate preparation of Safety Data Sheets for each hazardous substance and the application of standardized hazard labeling that meets federal safety standards. The work demands precision in material analysis, thorough recordkeeping, and strict adherence to regulatory requirements to support safe handling, storage, and transportation of hazardous goods within the supply chain. The contract is a subcontract under the NAICS code 541620, issued by the Department of Defense through DLA DIST SAN JOAQUIN, with performance required at a facility in Tracy, California, zip code 95304-5000. It was posted on August 9, 2026, and responses must be submitted by August 20, 2026. There is no set-aside designation, and the opportunity is open to qualified subcontractors capable of delivering compliant hazardous materials documentation and labeling services. The procurement is conducted through the DIBBS platform, and all technical and regulatory obligations must be fulfilled to meet Department of Defense safety and compliance expectations.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Labeling and Safety DataThe contract requires the provision of hazard labels and Material Safety Data Sheets for all hazardous components in compliance with OSHA 29 CFR 1910.1200, ensuring proper identification and handling of dangerous materials. This subcontract is issued under the NAICS code 541620 and is managed by the Electrical Devices Division within the Department of Defense, with performance required at Tracy, California, zip code 95304-5000. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, to meet the deadline. All materials and documentation must adhere strictly to federal safety regulations to support safe operations and regulatory compliance across the supply chain.

ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires identification of hazardous components and application of OSHA-compliant hazard communication labels in accordance with 29 CFR 1910.1200, or alternative regulatory frameworks such as FIFRA or FFDCA when applicable for government approval. This effort is critical to ensuring proper labeling of hazardous materials to meet federal safety and compliance standards, particularly for materials used in defense-related construction and equipment maintenance, repair, and overhaul activities. All labeling must clearly communicate chemical hazards, precautionary measures, and required protective actions as mandated by law. The work is positioned as a subcontract under NAICS code 541620, indicating a focus on environmental consulting and related technical services. The performance location is specified as New Cumberland, Pennsylvania, with a postal code of 17070-5002, and the contracting agency is the Department of Defense under the Construction & Equipment MRO SVC I procurement category. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and all submissions must be made through the DIBBS system using the provided link. Compliance with applicable federal regulations and accurate documentation of labeling procedures are essential to fulfill contract obligations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazardous and Radioactive Materials ComplianceThe contract requires comprehensive management of hazardous and radioactive materials employed in manufacturing and packaging operations, including precise identification, safe handling procedures, and proper labeling in accordance with established regulatory standards. A critical component involves the preparation and maintenance of Safety Data Sheets to ensure regulatory compliance and worker safety, alongside adherence to MIL-STD-129 for the packaging, marking, and documentation of hazardous shipments. All activities must align with strict Department of Defense protocols to ensure the secure and lawful transportation and use of dangerous substances. The work is to be performed at Robins Air Force Base, Georgia, 31098-1887, under a subcontract solicitation issued by the Department of Defense through the Warner Robins office. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541620, which categorizes scientific and technical consulting services. Contractors must demonstrate proven expertise in hazardous materials handling and DOD compliance to meet the requirements, with no set-aside provisions specified for small or disadvantaged businesses.

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data SupportThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets for hazardous materials in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200 standards. This effort is critical to ensure proper identification, handling, and communication of hazards associated with materials used or supplied under the agreement, with strict adherence to federal regulatory requirements for workplace safety and defense contracting. All documentation must be accurate, up to date, and formatted in accordance with the specified guidelines to meet military and occupational safety protocols. This subcontract, issued by the Active Devices Division of the Department of Defense, falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to safety and regulatory compliance. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The performance location and point of contact details are not specified, but the work must be executed to support the defense supply chain’s safety and regulatory obligations. Interested parties must respond through the designated DIBBS system portal before the deadline to be considered for award.

ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification and documentation of hazardous materials at the DOD’s New Cumberland facility, with a focus on preparing and maintaining Safety Data Sheets (SDS) that meet OSHA compliance standards for government submission. The work involves ensuring all hazardous substances are accurately characterized, categorized, and documented in accordance with federal regulations, and that SDS documents are consistently updated to reflect changes in material composition, handling procedures, or regulatory requirements. The contractor must demonstrate technical expertise in hazardous material management and SDS preparation to support the Department of Defense’s compliance obligations. This is a total small business set-aside under NAICS code 541620, reserved exclusively for small businesses as defined by the SBA, and is issued as a subcontract under a solicitation posted on August 9, 2026, with responses due by August 20, 2026. Performance is required at the New Cumberland location with ZIP code 17070-5002, and the contracting activity is managed by the Department of Defense through its DDSP New Cumberland Facility. The contractor is expected to operate under strict regulatory guidelines and deliver accurate, timely, and auditable SDS documentation to support federal safety and environmental compliance efforts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis contract requires the preparation and submission of Safety Data Sheets for valves that involve hazardous substances, ensuring full compliance with federal regulations governing hazardous materials handling. The work demands accurate documentation and adherence to safety standards to mitigate risks associated with chemical exposure and transportation, with a focus on regulatory precision and timely delivery of SDS documentation. The subcontract is set aside exclusively for Women-Owned Small Businesses under the WOSB program, and the North American Industry Classification System code 541620 indicates it falls under scientific and technical consulting services, specifically environmental consulting and related compliance support. Performance of the contract is centered in Tracy, California, with a zip code of 95304-5000, and bids must be submitted by August 20, 2026. The solicitation is managed by the DLA Dist San Joaquin under the Department of Defense, indicating a direct connection to defense supply chain requirements. Although no point of contact is listed publicly, interested parties can access additional details through the official DIBBS portal. The contract emphasizes regulatory diligence and environmental safety, making technical expertise in hazardous materials compliance and SDS formatting essential for qualified bid applicants.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract involves the preparation, validation, and ongoing management of Safety Data Sheets (SDS) to ensure full compliance with OSHA and Defense Logistics Agency (DLA) regulations. This work is critical for maintaining hazardous materials safety standards at Tinker Air Force Base, where the performance location is designated. The subcontractor will be responsible for accurately developing SDS documents, verifying their alignment with federal safety requirements, and sustaining updates as chemical inventories or regulatory standards evolve. The effort supports the Department of Defense’s obligation to safeguard personnel, environmental health, and operational continuity through rigorous hazardous materials documentation practices. The solicitation, posted on August 9, 2026, requires responses by August 20, 2026, and falls under NAICS code 541620 for scientific and technical consulting services. While no set-aside type is specified, the contract is structured as a subcontract under the Depot Oklahoma organization of the Department of Defense. Performance will occur exclusively at Tinker AFB with a zip code of 73145-8000, and the technical scope demands precise adherence to federal compliance frameworks. Contractors must demonstrate proven capability in SDS lifecycle management with direct experience in defense or government hazardous materials environments to meet the rigorous expectations of this requirement.

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract requires comprehensive identification and documentation of hazardous materials in accordance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001, ensuring all regulated substances are properly categorized and disclosed. Contractors must prepare, maintain, and submit accurate Safety Data Sheets for each hazardous material, along with ensuring all containers and storage areas are labeled in full compliance with federal regulations. The work is scoped to support DoD maintenance, repair, and operations activities, with performance centered in San Diego, California, under a Small Business Set-Aside designation as defined by the SBA and FAR 19.5. The NAICS code 541620 indicates this effort falls under environmental consulting services, and submissions must be completed by the response deadline of August 20, 2026, following the solicitation posted on August 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

Hazard Communication & Labeling Compliance

CHERRY POINT PHANTOM RD BLDG

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract entails the identification, documentation, and continuous management of hazardous materials used within Department of Defense operations, with a primary focus on ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS regulations. This includes the preparation, maintenance, and timely updating of Safety Data Sheets (SDS) for all applicable substances, requiring rigorous tracking, accurate chemical disclosure, and alignment with federal safety and reporting mandates. Work must be performed in San Diego, California, at the specified ZIP code, and is structured as a subcontract under NAICS code 541620, indicating a focus on scientific and technical consulting services related to environmental and safety compliance. All proposals must be submitted by the deadline of August 20, 2026, following the release of the solicitation on August 9, 2026. While no set-aside designation is specified, the contract is managed by the Defense Logistics Agency under the broader oversight of the Department of Defense, reflecting its importance to military supply chain safety and regulatory adherence. The successful vendor will be responsible for maintaining ongoing SDS accuracy, responding to regulatory changes, and ensuring all hazardous material documentation meets DoD standards for operational continuity and personnel protection. The work will be carried out remotely or on-site as needed, but performance location is fixed in San Diego.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Logistics and Transportation to DestinationThe contract requires secure transportation of a completed container equipped with an infrared viewer to its final destination at Camp Lejeune, North Carolina, with strict adherence to military freight handling protocols to ensure safety, accountability, and operational readiness. All logistics activities must comply with Department of Defense standards, including proper packaging, routing, handling, and documentation during transit to prevent damage or compromise of sensitive equipment. The contractor is responsible for end-to-end tracking and delivery coordination under the constraints and security requirements inherent to military cargo. Invoicing must be processed exclusively through the Wide Area Work Flow system, ensuring accurate, timely, and auditable financial documentation aligned with federal procurement guidelines. The solicitation, issued under NAICS code 484220 for truck transportation, is structured as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a limited timeframe for qualified bidders to submit proposals. The contracting entity is the Department of Defense under the Construction & Equipment Containers organization, emphasizing the mission-critical nature of this delivery for military operations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 3 hours ago

DEADLINE

Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and documentation of NIST Special Publication 800-171 controls to safeguard covered defense information associated with the design, production, and logistics of containers. This effort is aimed at ensuring compliance with federal cybersecurity standards for handling-controlled unclassified information within the defense supply chain. The work must be executed in accordance with the specifications outlined for protecting sensitive data throughout all phases of container development and distribution, with full transparency and traceability in recordkeeping. This subcontract is tied to the Department of Defense and will be performed at Camp Lejeune, North Carolina, with a NAICS code of 541512, indicating it relates to computer systems design services. The opportunity was posted on August 9, 2026, and responses are due by August 20, 2026. It is part of a broader initiative to strengthen cybersecurity posture across defense-related manufacturing and logistics operations, requiring strict adherence to NIST guidelines to mitigate risks involving sensitive information handled by the contractor.

Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

Specialized Packaging, Preservation, and LabelingThis contract requires the application of military-grade preservation techniques including VCI packaging and desiccants to safeguard the infrared viewer during extended storage and transportation phases, ensuring operational readiness and protection against corrosion, moisture, and environmental degradation. Compliant labeling must be implemented in accordance with stringent defense standards to guarantee traceability, proper handling, and identification throughout the supply chain. The work is targeted for performance at Camp Lejeune with a zip code of 28542-0141, reflecting a DoD-affiliated operational environment. The solicitation is structured as a subcontract under NAICS code 493190, with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a tightly scoped, time-sensitive procurement governed by defense logistics protocols.

Other Warehousing and Storage

POSTED

about 3 hours ago

DEADLINE

Precision Metal Fabrication of Infrared Viewer ContainerA custom metal container is being fabricated to securely transport and store an infrared viewer, with stringent requirements for durability, environmental protection, and electromagnetic shielding in accordance with MIL-STD specifications. The container must provide robust EMI/RFI shielding to ensure the sensitive infrared equipment remains operational in harsh field conditions, while also resisting moisture, dust, shock, and temperature variations. The fabrication work is governed by precise manufacturing standards to guarantee structural integrity and operational reliability under military-grade demands. The contract is issued as a subcontract under NAICS code 332322, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Performance is required at Camp Lejeune, North Carolina, with an official zip code of 28542-0141. The procuring entity is the Department of Defense through its Construction & Equipment Containers division, indicating the end user is likely a military or defense operational unit. All submissions and compliance documentation must meet the exacting technical criteria outlined by military specifications to qualify for award.

Sheet Metal Work Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Shipping and Storage ContainersThe contract entails the procurement and delivery of 115 miscellaneous shipping and storage containers to be used under federal logistics requirements, with strict adherence to labeling standards and hazardous materials regulations. All containers must meet federal compliance standards to ensure safe handling, transportation, and storage in alignment with applicable Department of Defense protocols. The effort is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 332439 for other fabricated metal product manufacturing. Performance is required at New Cumberland, Pennsylvania, with the zip code 17070-5002 as the sole place of delivery and operation. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, providing a twelve-day window for submissions. The contracting entity is listed as the Department of Defense under the organization name Construction & Equipment Containers, indicating the need for containers to support military or government infrastructure, maintenance, or operational logistics. While no specific point of contact or agency address is provided, the official solicitation can be accessed via the DIBBS portal to obtain detailed technical specifications and submission guidelines. Compliance with all federal regulations concerning hazardous materials and logistics labeling is non-negotiable, and bidders must demonstrate capability to meet these requirements in full.

Other Metal Container Manufacturing

POSTED

about 3 hours ago

DEADLINE

Radioactive Materials Marking ComplianceThe contract pertains to the detection and precise marking of containers holding radioactive materials that exceed a threshold of 0.002 microcuries per gram, in full alignment with MIL-STD-129 standards. This work is required to ensure proper identification and handling of hazardous materials within military logistics systems, emphasizing safety, regulatory compliance, and traceability. The performance location is designated as Charlotte, North Carolina, with a zip code of 28208-5845, indicating the physical site where the marking and detection activities must be carried out. This is a subcontract under the NAICS code 541380, which classifies the service as other scientific and technical consulting services, suggesting specialized technical expertise is needed for accurate detection and labeling procedures. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, providing a narrow window for interested parties to submit proposals. The agency responsible is the Department of Defense through its Construction & Equipment Containers organization, indicating this requirement is tied to defense-related inventory and transportation protocols. All work must strictly adhere to federal standards to ensure seamless integration with military supply chain operations.

Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

Government Identification Removal from Non-Accepted SuppliesThe contract requires the secure removal of government identifiers from supplies that have been rejected or not accepted, ensuring compliance with requirement RQ011. This includes implementing strict protocols for handling materials, maintaining chain-of-custody tracking throughout the process, and ensuring all sensitive identifiers are permanently and irreversibly erased or obscured to prevent unauthorized recovery or use. The work must be conducted in a manner that upholds security standards and documentation integrity from point of receipt through final disposition. This is a subcontract under the NAICS code 561990, issued by the Department of Defense under the entity name CONSTRUCTION & EQUIPMENT CONTAINERS, with performance required in Charlotte, North Carolina, at zip code 28208-5845. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All work must adhere to defined security and accountability procedures, and contractors are expected to demonstrate capability in secure material handling and documentation systems to meet federal compliance standards for defense-related logistics.

All Other Support Services

POSTED

about 3 hours ago

DEADLINE

Molded Plastic Container SupplyThe contract involves the supply of 20 military-spec molded plastic containers designated by NSN 8145-01-524-7286, requiring full compliance with MIL-STD-129 for labeling and ASTM D3951 for packaging standards to ensure durability and interoperability within defense logistics systems. The items must meet exacting military requirements for materials, construction, and environmental resilience to support storage and transport of sensitive equipment. Performance is to be delivered to a specified location in Charlotte, North Carolina, with zip code 28208-5845, and the work falls under NAICS code 326199 for other plastics product manufacturing. This is a subcontract opportunity posted on August 9, 2026, with a firm response deadline of August 20, 2026, managed by the Department of Defense under the organization name Construction & Equipment Containers. The solicitation is accessible via the DIBBS platform, and while no set-aside designation or point of contact is listed, bidders must adhere strictly to the technical specifications and delivery requirements outlined in the referenced standards to qualify for award. The contract does not specify whether small business considerations apply, and all submissions must be completed prior to the deadline to be considered.

All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Military-Grade Packaging Materials Supply

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

O-Ring Supply for Military Desiccant Port

All Other Rubber Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Cadmium Plating and Surface Treatment Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 3 hours ago

DEADLINE

Supply of Specialty Materials and Components for Port Desiccant Production

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 3 hours ago

DEADLINE