Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Specialty Materials and Components for Port Desiccant Production

Active

Federal

Response Deadline08/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

ANNISTON, AL, 36201-4199, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of raw materials including AISI C1010 or 302/304 stainless steel, cadmium plating, SAE-AS28775 o-rings, and MIL-STD-2073-1E compliant packaging materials for use in manufacturing military port desiccant.

Similar Contracts

Same NAICS industry code

Cold-Finished Steel Flat Bar Supply

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Domestic Specialty Metals Sourcing

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2054

This contract specifies the procurement of 70 feet of 316L stainless steel bar stock, annealed with a hot finish and pickled overall, with a diameter of 3.000 inches and lengths between 10 and 12 feet in whole-foot increments. The material must meet strict technical and quality standards referenced through DLA’s Master List of Technical and Quality Requirements and is subject to multiple contract data requirements lists, including mandatory Certificate of Quality Compliance (CoQC) documentation with every shipment. The supplier must provide mill-certified material data, and the product must be identified with continuous markings on each unit that include the contract number, NSN, specification revision, alloy, manufacturer details, heat and lot numbers, and dimensions, using only stenciling or stamping methods that are durable, legible, and non-contaminating. Adhesive labels are required for bars under 0.250 inches in nominal diameter. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an exception that must be explicitly declared. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E, MIL-STD-129R, and ASTM A700 standards, using special codes Z and ZZ as defined. The material is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, within 59 days of award, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the destination, and failure to comply with any requirement, particularly regarding supplier qualification or documentation, may result in rejection of the product and potential criminal penalties.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2036

This contract specifies the procurement of aluminum alloy plate measuring 2.000 inches thick, 24.00 inches wide, and 72.00 inches long, with a reference weight of 345.6 pounds per piece, intended for critical applications. The material must conform to SAE AMS-QQ-A-250/4B Revision B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, with a specified temper of T351 and alloy grade 2024. The plate must be supplied in whole-foot lengths only and is subject to strict dimensional tolerances with no test coupons permitted. Each unit must be precisely marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade, class and type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal OD. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement must be explicitly declared. Certificates of Quality Compliance, including mill-material certification, must accompany every shipment and be forwarded to the contracting officer. Packaging must adhere to MIL-STD-2073-1E and Level A requirements of ASTM B660, with preservation and marking standards aligned to ASTM B660 and MIL-STD-129R. All shipments are to be delivered FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of November 27, 2026 and an accepted delivery window of 164 days. The government waives source inspection requirements for qualified QSLD suppliers, and non-compliance may result in rejection of goods, civil penalties, or criminal liability. Continuous identification markings are mandatory, and the use of unauthorized substitutions is strictly prohibited. The total quantity ordered is six pieces, with zero variance permitted, and the contracting officer is Pamela Duffey.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2053

The contract specifies the procurement of 118 linear feet of 4140 steel bar stock, annealed and cold finished, with a diameter of 2.500 inches and lengths between 12 and 20 feet in whole-foot increments, weighing approximately 16.69 pounds per foot. All material must conform to SAE AMS6382S and be accompanied by a Certificate of Quality Compliance, which must be provided with each shipment and forwarded to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using stenciling or approved methods that do not contaminate the material; adhesive labels are required for bars under 0.250 inches in diameter. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700, and palletization must adhere to DLA packaging requirements. The product must be shipped FOB origin, with delivery due within 164 days of contract award, and a 10% variance in quantity is permitted. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) and any deviation from this requirement must be explicitly declared. Source inspection requirements are waived for QSLD-compliant suppliers, and non-compliance may be considered an unauthorized substitution subject to criminal penalties. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and the material is subject to defense information controls.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2068

Aluminum alloy sheet metal, 0.093 inches thick, 48 inches wide, and 144 inches long, totaling 62.35 pounds per sheet, is being procured under solicitation SPE8E4-26-T-2068 with a delivery requirement of 136 days and a firm delivery date of January 4, 2027. The material must conform strictly to the dimensions specified, with no test coupons permitted, and must be supplied in whole-foot lengths only. It must be manufactured from Alloy 5052 in H32 temper, conforming to SAE AMS-QQ-A-250/8C and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23. Full compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and any deviation must be explicitly declared. Unauthorized substitutions may result in criminal penalties. Every shipment must include a Certificate of Quality Compliance, and continuous marking on each unit is required, including contract number, NSN, specification revision, alloy, grade, manufacturer, heat and lot number, and dimensions, applied via stamping or stenciling in legible, waterproof, non-contaminating text. Packaging must follow MIL-STD-2073-1E and ASTM B660 Level A requirements with preservation code ZZ and marking code Z, and all units must be labeled in accordance with MIL-STD-129R. Delivery is FOB origin to the Puget Sound Distribution Depot in Bremerton, WA, with no quantity variance permitted. The solicitation waives source inspection requirements for QSLD-compliant suppliers, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements.

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2067

Aluminum alloy sheet metal, 0.063 inches thick, 48 inches wide, and 144 inches long, is being procured under solicitation SPE8E4-26-T-2067 with a total quantity of nine sheets, each weighing approximately 41.79 pounds. The material must strictly conform to the specified dimensions without allowances for test coupons, and all sheets must be delivered in whole-foot lengths only. Compliance with ASTM B209/B209M Revision A, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23 standards is required, along with certification of quality compliance via mill-material certification that must accompany each shipment to the delivery point and be forwarded to the DLA Troop Support Contracting Officer. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; any deviation from this requirement must be explicitly stated and may result in rejection. Continuous markings are mandatory on every unit, including the DLA contract number, NSN, specification revision, alloy grade, temper, manufacturer, heat and lot number, and dimensions, using only stenciling or stamping methods that are legible, durable, waterproof, and non-contaminating. Packaging must follow MIL-STD-2073-1E and Level A requirements of ASTM B660, with specific preservation and marking codes ZZ and Z as defined. Markings must include both units of measure when applicable, and palletization must adhere to DLA packaging guidelines. Delivery is FOB origin with a required ship date of December 21, 2026, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania. Any failure to meet these technical, quality, marking, or procedural requirements will result in rejection of the material and may lead to criminal or civil penalties, particularly where QSL program compliance is not met.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2063

This contract specifies the procurement of aluminum alloy sheet metal with precise physical dimensions: 0.010 inches thick, 48 inches wide, and 144 inches long, totaling 6.912 pounds per sheet. The material must conform strictly to SAE AMS-QQ-A-250/4B Revision B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, with a specified temper of T3 and alloy designation of 2024. The product is designated as a critical application item and must be supplied in whole-foot lengths only, with no test coupons permitted. Every unit must bear continuous identification markings including the DLA contract delivery order number, NSN, specification revisions, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions, applied via stamping or stenciling using waterproof, non-contaminating fluid that remains legible under normal handling. Adhesive labels are required for smaller straight bars, tubes, and shapes under 0.250 inches nominal OD. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly disclosed; non-compliant bids will be rejected and may incur criminal penalties. Certification of quality compliance, including mill-material certification, is mandatory and must accompany every shipment to both the customer and the DLA Troop Support Contracting Officer. Packaging must comply with MIL-STD-2073-1E and preservation requirements per ASTM B660, with marking strictly aligned to MIL-STD-129R. Shipping is FOB origin, with delivery due in 164 days to Tinker AFB, Oklahoma, and no quantity variance is permitted. The item falls under a government acquisition governed by stringent quality and compliance controls, including waiver of source inspection for QSLD-compliant suppliers and full adherence to the DLA Master List of Technical and Quality Requirements. Failure to meet any requirement, including marking, certification, or qualification, will result in rejection of the material.

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2051

This contract specifies the procurement of steel bar stock compliant with specification SPE8E4-26-T-2051, classified under NSN 9510-01-030-1992. The material is hot-finished flat steel, 1.000 inch thick and 3.000 inches wide, supplied in whole-foot lengths between 10 and 12 feet, with a reference weight of 10.2 pounds per foot. The product must fully conform to technical and quality requirements referenced in the DLA Master List, including material certification through a Certificate of Quality Compliance (Mill-Material Certification) for every shipment, which must be furnished to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract number, NSN, specification revision, alloy grade, manufacturer's name, heat and lot number, and dimensions, with permitted methods limited to stamping or stenciling that ensures legibility, durability, and non-contamination. Adhesive labels are required for smaller bars under 0.250 inches in nominal OD, and tags are acceptable for wire. The contract enforces strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official DLA QSLD to bid or supply, unless a formal deviation is declared. Non-compliance may result in rejection of the product and potential criminal penalties. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special packaging codes Z and ZZ as defined by ASTM A700, and vinyl or plastic pressure-sensitive labels authorized for structural shapes and banded lifts. All shipments must be palletized per DLA packaging requirements and delivered FOB origin to the DDSP New Cumberland Facility in Pennsylvania, with a total quantity of 77 feet to be delivered within 164 days of contract award. A 10% variance in quantity is permitted, inspection and acceptance occur at destination, and the material must meet referenced standards including SAE AMS5643W, ASTM A700, and SAE AMS2806. The contract includes waived source inspection requirements for QSLD-compliant suppliers, with documentation governed by CDRL-METALSCERT and the associated Technical Data Package.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2069

This contract specifies the procurement of aluminum alloy sheet metal with precise dimensions: 0.010 inches thick, 48 inches wide, and 144 inches long, weighing approximately 6.912 pounds per sheet. The material must conform to SAE AMS-QQ-A-250/4B Revision B and ASTM standards, with a specified alloy of 2024 in T3 temper, and must be supplied in whole foot lengths only. Strict dimensional compliance is mandatory, with no test coupons permitted. All units must be marked with continuous identification including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions, using only stamping or stenciling methods that are legible, waterproof, and non-contaminating. Adhesive labels are required for smaller bars and tubes. A Certificate of Quality Compliance, or mill-material certification, must accompany every shipment and be forwarded to the DLA Contracting Officer. This procurement is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, meaning only suppliers listed on the official DLA Troop Support QSLD are eligible to bid. Any deviation from this requirement must be explicitly declared, and non-compliant products will be treated as unauthorized substitutions, potentially resulting in criminal penalties. The government waives source inspection requirements for QSL-compliant suppliers, relieving them from certain quality conformance inspections. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 for preservation, with marking complying fully with MIL-STD-129R. The total quantity is 13 sheets, to be delivered FOB origin within 150 days to Tinker AFB, Oklahoma, with zero tolerance for variance in quantity. Failure to meet any technical, marking, qualification, or delivery requirement will result in rejection of the product.

POSTED

about 4 hours ago

DEADLINE

Domestic Content Certification for Iron/Steel ProductsThe contract involves the supply of iron and steel end products requiring full compliance with Buy American and DFARS domestic content regulations. All delivered items must be manufactured in the United States, with every component and material originating from domestic sources, and suppliers must provide verifiable certification to confirm compliance with these statutory requirements. The products are intended for use in defense-related applications under the purview of the Department of Defense, specifically through the Defense Logistics Agency, and performance is expected to meet stringent federal procurement standards for domestic sourcing. Subcontractors are expected to respond to this solicitation by the deadline of August 17, 2026, and must ensure complete documentation of origin and manufacturing processes to meet certification obligations. The NAICS code 331110 indicates the focus is on iron and steel mills and fermentation, suggesting the end products are likely raw or semi-finished materials used in broader defense manufacturing chains. There is no set-aside specified, meaning all eligible entities may bid, but only those able to demonstrate full domestic content compliance will be considered. The contract is not location-specific in its performance requirements, but all deliverables must adhere strictly to federal domestic material sourcing laws.

Defense Logistics Agency

POSTED

DEADLINE

U.S.-Manufactured Iron & Steel SupplyThis contract requires the supply of iron and steel products that are entirely manufactured in the United States for infrastructure-related projects under the jurisdiction of the Texas Department of Transportation. All products must comply with Texas Government Code Chapter 2252, Subchapter G, which mandates the use of domestically produced materials in state-funded infrastructure work, ensuring that no foreign-sourced iron or steel is utilized. The solicitation is issued as a subcontract and is open for responses until August 20, 2026, with a posted date of August 6, 2026, indicating a two-week window for interested parties to submit proposals. The North American Industry Classification System code 331110 identifies the primary industry as iron and steel mills and ferroalloy manufacturing, underscoring the focus on primary production rather than downstream fabrication or distribution. Performance of the contract is tied to infrastructure projects across Texas, though specific project locations are not detailed in the provided data. Participation is restricted to U.S.-based manufacturers capable of verifying the domestic origin of all materials, and compliance with state regulatory requirements is mandatory for award and execution.

Texas Department of Transportation

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Logistics and Transportation to DestinationThe contract requires secure transportation of a completed container equipped with an infrared viewer to its final destination at Camp Lejeune, North Carolina, with strict adherence to military freight handling protocols to ensure safety, accountability, and operational readiness. All logistics activities must comply with Department of Defense standards, including proper packaging, routing, handling, and documentation during transit to prevent damage or compromise of sensitive equipment. The contractor is responsible for end-to-end tracking and delivery coordination under the constraints and security requirements inherent to military cargo. Invoicing must be processed exclusively through the Wide Area Work Flow system, ensuring accurate, timely, and auditable financial documentation aligned with federal procurement guidelines. The solicitation, issued under NAICS code 484220 for truck transportation, is structured as a subcontract with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a limited timeframe for qualified bidders to submit proposals. The contracting entity is the Department of Defense under the Construction & Equipment Containers organization, emphasizing the mission-critical nature of this delivery for military operations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and documentation of NIST Special Publication 800-171 controls to safeguard covered defense information associated with the design, production, and logistics of containers. This effort is aimed at ensuring compliance with federal cybersecurity standards for handling-controlled unclassified information within the defense supply chain. The work must be executed in accordance with the specifications outlined for protecting sensitive data throughout all phases of container development and distribution, with full transparency and traceability in recordkeeping. This subcontract is tied to the Department of Defense and will be performed at Camp Lejeune, North Carolina, with a NAICS code of 541512, indicating it relates to computer systems design services. The opportunity was posted on August 9, 2026, and responses are due by August 20, 2026. It is part of a broader initiative to strengthen cybersecurity posture across defense-related manufacturing and logistics operations, requiring strict adherence to NIST guidelines to mitigate risks involving sensitive information handled by the contractor.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Specialized Packaging, Preservation, and LabelingThis contract requires the application of military-grade preservation techniques including VCI packaging and desiccants to safeguard the infrared viewer during extended storage and transportation phases, ensuring operational readiness and protection against corrosion, moisture, and environmental degradation. Compliant labeling must be implemented in accordance with stringent defense standards to guarantee traceability, proper handling, and identification throughout the supply chain. The work is targeted for performance at Camp Lejeune with a zip code of 28542-0141, reflecting a DoD-affiliated operational environment. The solicitation is structured as a subcontract under NAICS code 493190, with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a tightly scoped, time-sensitive procurement governed by defense logistics protocols.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Precision Metal Fabrication of Infrared Viewer ContainerA custom metal container is being fabricated to securely transport and store an infrared viewer, with stringent requirements for durability, environmental protection, and electromagnetic shielding in accordance with MIL-STD specifications. The container must provide robust EMI/RFI shielding to ensure the sensitive infrared equipment remains operational in harsh field conditions, while also resisting moisture, dust, shock, and temperature variations. The fabrication work is governed by precise manufacturing standards to guarantee structural integrity and operational reliability under military-grade demands. The contract is issued as a subcontract under NAICS code 332322, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Performance is required at Camp Lejeune, North Carolina, with an official zip code of 28542-0141. The procuring entity is the Department of Defense through its Construction & Equipment Containers division, indicating the end user is likely a military or defense operational unit. All submissions and compliance documentation must meet the exacting technical criteria outlined by military specifications to qualify for award.

Sheet Metal Work Manufacturing

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance and Documentation

Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

Supply of Containerized Construction or Equipment Item (NSN 8145-01-696-3505)

Other Metal Container Manufacturing

POSTED

about 4 hours ago

DEADLINE

Precision Packaging and Marking of Military Equipment

Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

Supply of Shipping and Storage ContainersThe contract entails the procurement and delivery of 115 miscellaneous shipping and storage containers to be used under federal logistics requirements, with strict adherence to labeling standards and hazardous materials regulations. All containers must meet federal compliance standards to ensure safe handling, transportation, and storage in alignment with applicable Department of Defense protocols. The effort is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 332439 for other fabricated metal product manufacturing. Performance is required at New Cumberland, Pennsylvania, with the zip code 17070-5002 as the sole place of delivery and operation. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, providing a twelve-day window for submissions. The contracting entity is listed as the Department of Defense under the organization name Construction & Equipment Containers, indicating the need for containers to support military or government infrastructure, maintenance, or operational logistics. While no specific point of contact or agency address is provided, the official solicitation can be accessed via the DIBBS portal to obtain detailed technical specifications and submission guidelines. Compliance with all federal regulations concerning hazardous materials and logistics labeling is non-negotiable, and bidders must demonstrate capability to meet these requirements in full.

Other Metal Container Manufacturing

POSTED

about 4 hours ago

DEADLINE

Radioactive Materials Marking ComplianceThe contract pertains to the detection and precise marking of containers holding radioactive materials that exceed a threshold of 0.002 microcuries per gram, in full alignment with MIL-STD-129 standards. This work is required to ensure proper identification and handling of hazardous materials within military logistics systems, emphasizing safety, regulatory compliance, and traceability. The performance location is designated as Charlotte, North Carolina, with a zip code of 28208-5845, indicating the physical site where the marking and detection activities must be carried out. This is a subcontract under the NAICS code 541380, which classifies the service as other scientific and technical consulting services, suggesting specialized technical expertise is needed for accurate detection and labeling procedures. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, providing a narrow window for interested parties to submit proposals. The agency responsible is the Department of Defense through its Construction & Equipment Containers organization, indicating this requirement is tied to defense-related inventory and transportation protocols. All work must strictly adhere to federal standards to ensure seamless integration with military supply chain operations.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Labeling ComplianceThe contract requires compliance with OSHA HAZCOM and GHS standards for the proper labeling of container packages containing hazardous materials, ensuring accurate hazard communication across all handled substances. The work is classified under NAICS code 541620 and is structured as a subcontract under the Department of Defense, specifically managed by CONSTRUCTION & EQUIPMENT CONTAINERS, with performance required at a location in Charlotte, North Carolina, 28208-5845. All labeling must meet federal regulatory requirements for identifying chemical hazards, including pictograms, signal words, hazard statements, and supplier information, to safeguard workers and ensure regulatory alignment. The solicitation was posted on August 9, 2026, with a deadline for responses on August 20, 2026, and is accessible through the DIBBS platform at the provided UI link.

Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

Government Identification Removal from Non-Accepted SuppliesThe contract requires the secure removal of government identifiers from supplies that have been rejected or not accepted, ensuring compliance with requirement RQ011. This includes implementing strict protocols for handling materials, maintaining chain-of-custody tracking throughout the process, and ensuring all sensitive identifiers are permanently and irreversibly erased or obscured to prevent unauthorized recovery or use. The work must be conducted in a manner that upholds security standards and documentation integrity from point of receipt through final disposition. This is a subcontract under the NAICS code 561990, issued by the Department of Defense under the entity name CONSTRUCTION & EQUIPMENT CONTAINERS, with performance required in Charlotte, North Carolina, at zip code 28208-5845. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. All work must adhere to defined security and accountability procedures, and contractors are expected to demonstrate capability in secure material handling and documentation systems to meet federal compliance standards for defense-related logistics.

All Other Support Services

POSTED

about 4 hours ago

DEADLINE

Molded Plastic Container SupplyThe contract involves the supply of 20 military-spec molded plastic containers designated by NSN 8145-01-524-7286, requiring full compliance with MIL-STD-129 for labeling and ASTM D3951 for packaging standards to ensure durability and interoperability within defense logistics systems. The items must meet exacting military requirements for materials, construction, and environmental resilience to support storage and transport of sensitive equipment. Performance is to be delivered to a specified location in Charlotte, North Carolina, with zip code 28208-5845, and the work falls under NAICS code 326199 for other plastics product manufacturing. This is a subcontract opportunity posted on August 9, 2026, with a firm response deadline of August 20, 2026, managed by the Department of Defense under the organization name Construction & Equipment Containers. The solicitation is accessible via the DIBBS platform, and while no set-aside designation or point of contact is listed, bidders must adhere strictly to the technical specifications and delivery requirements outlined in the referenced standards to qualify for award. The contract does not specify whether small business considerations apply, and all submissions must be completed prior to the deadline to be considered.

All Other Plastics Product Manufacturing

POSTED

about 4 hours ago

DEADLINE