This Government Contract opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hazardous Materials Management and SDS Compliance

Closed

Federal

Submission Closed07/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690

New

SLED

PROFESSIONAL ON-CALL AIRPORT PLANNING SERVICES FOR EAST GEORGIA REGIONAL AIRPORTThe City of Swainsboro is soliciting qualified aviation consulting firms to provide on-call professional airport planning services for the East Georgia Regional Airport, specifically in support of its Airport Capital Improvement Plan. This engagement requires expert consultation in areas such as airport development, infrastructure planning, regulatory compliance, and long-term strategic planning to guide capital investments and operational enhancements at the facility. The solicitation is open to firms with demonstrated experience in airport planning and a proven ability to deliver technical services tailored to regional airport needs. Responses must be submitted no later than August 13, 2026, at 5:00 PM, with the opportunity identified under solicitation number PE-66723-NONST-2026-000000018. The contract is issued by the City of Swainsboro under the State of Georgia’s procurement system and is categorized under SLED government procurement. All work is to be performed in Georgia, and inquiries should be directed to Jerry Cadle at Jerry@cadlelawfirm.com. There is no set-aside designation specified, and the contract is open to qualified public and private sector consultants meeting the required expertise and credentials.

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA Hazard Communication standards and applicable military regulations. The work is focused on ensuring accurate, standardized documentation for hazardous materials used within the Department of Defense’s Fluid Handling Division, with all deliverables meeting federal safety and labeling requirements. The performance location is specified as New Cumberland, PA, 17070-5002, indicating the need for localized support and potential on-site coordination with defense logistics operations. This is a subcontract opportunity under NAICS code 541690, classified as a professional, scientific, and technical service, and is open for responses until August 3, 2026. The solicitation was posted on July 24, 2026, and interested parties must align their technical proposals with both civilian and military compliance frameworks. While no set-aside designation is specified, bidders are expected to demonstrate proven expertise in hazardous materials documentation, experience with DoD procurement protocols, and the capability to maintain rigorous quality control over label and SDS accuracy to support operational safety across defense supply chains.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and Documentation SupportThe contract requires full compliance with FED-STD-313 for hazardous materials associated with LED lamp components, encompassing accurate hazard labeling, timely submission of material safety data sheets, and seamless coordination with shipping procedures to meet both Department of Defense and OSHA regulatory standards. All documentation and labeling must align precisely with federal safety protocols to ensure legal and operational adherence across the supply chain. This subcontract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 541690, reserved for qualifying small businesses owned by service-disabled veterans. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, and is administered by the Department of Defense under the Construction & Equipment MRO SVC I contract structure. Performance location details are unspecified, but all work must be executed in accordance with federal mandates and coordinated through the official DIBBS portal linked in the solicitation.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Hazard Communication Compliance (Hazardous Materials Documentation)The contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for all hazardous materials used in production or plating operations, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This subcontract is issued by the ASC Commodities Division under the Department of Defense and targets service providers capable of accurately documenting chemical hazards in accordance with federal safety regulations. The work must be completed and submitted by the response deadline of July 31, 2026, following the solicitation posted on July 24, 2026. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service related to other scientific and technical consulting services, suggesting the need for specialized expertise in chemical safety documentation. Performance location details are unspecified, and no set-aside status or point of contact information is provided, indicating a broad eligibility for qualified subcontractors to respond.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Network Infrastructure Evaluation & AssessmentThe contract seeks a comprehensive evaluation of the ICON optical network to assess performance, detect degradation, and determine necessary upgrades using diagnostic tools such as OTDR. The work involves analyzing network health, identifying bottlenecks or failures, and recommending actionable improvements to ensure optimal functionality and future scalability. The assessment must be thorough, leveraging industry-standard techniques to pinpoint issues that may impact service reliability or bandwidth capacity. The solicitation is classified as a subcontract under NAICS code 541690 and is open for response until July 31, 2026. It is issued by the City of Denton in Texas, with performance expected to take place within its jurisdiction. Bidders must submit their proposals by the stated deadline, though no specific set-aside provisions or point of contact details are provided. The evaluation is critical to maintaining the integrity of the city’s optical infrastructure and guiding strategic investments in network modernization.

POSTED

DEADLINE

Jail Efficiency StudySnohomish County is soliciting proposals through an RFP titled Jail Efficiency Study, identified by the number RFP-26-0779BC, with documents available to registered users starting July 24, 2026. The bid opportunity is open to qualified responders seeking to conduct a comprehensive evaluation of jail operations with the goal of identifying efficiencies and potential improvements. All submission materials, including detailed requirements and documentation, can only be accessed after logging into the procurement portal, and all inquiries must be directed via email to purchasing@snoco.org. Clarification questions are due by August 5, 2026, at 1:00 PM, with final proposals required by August 13, 2026, at 1:00 PM. The contract is issued under a state and local government (SLED) procurement process, and while no specific NAICS code or set-aside designation is provided, the performance location is within Washington State. Technical support for the portal is available through a dedicated phone line, and all responses must be submitted through the online system as no alternative submission methods are specified.

POSTED

DEADLINE

Audit & Compliance Support ServicesThe contract titled Audit & Compliance Support Services is a subcontract issued by Tarrant County, Texas, aimed at providing comprehensive support for audit readiness and response activities. The primary focus involves ensuring proper documentation is accessible, facilitating remediation efforts to address audit findings, and coordinating effectively with Tarrant County auditors to maintain compliance and operational transparency. Contractors are expected to deliver timely and accurate support throughout the audit lifecycle, from preparation through resolution, to uphold the county’s accountability standards. This opportunity is open for bids until August 24, 2026, and is classified under NAICS code 541690, which encompasses other administrative and support services. There is no set-aside designation specified, and the place of performance and point of contact details are not provided in the posting. Interested parties must respond through the official portal linked in the solicitation, and all work must align with the expectations set by Tarrant County to ensure seamless collaboration and compliance with local audit requirements.

POSTED

DEADLINE

Inspection and Acceptance Support

POSTED

DEADLINE

Vulnerability Exploitability eXchange (VEX) Reporting

POSTED

DEADLINE

UXO Risk Assessment and Safety ManagementThe contract titled UXO Risk Assessment and Safety Management requires the execution of explosive hazard risk assessments using the Risk Management Methodology RMM to evaluate the likelihood of encountering unexploded ordnance the potential severity of such encounters and the risk of detonation. The work involves producing comprehensive safety recommendations based on these assessments to mitigate hazards and ensure operational safety. This subcontract is issued under the NAICS code 541690 and is administratively linked to the Department of Defense through its office Endist Sacramento with performance expected to take place in Sacramento. The solicitation is set to be posted on July 24 2026 indicating the upcoming opportunity for qualified entities to pursue the work under this contract.

POSTED

DEADLINE

Bi-Weekly Technical Reporting and PresentationsThe contract requires the provision of bi-weekly technical progress updates and presentations to the Centers for Disease Control and Prevention’s Contracting Officer’s Representative, focusing on delivering clear, timely, and actionable technical reporting to support ongoing project oversight. Performance is based in Atlanta, Georgia, with the work tied to a subcontract under the NAICS code 541690, which encompasses other scientific and technical consulting services. The opportunity was posted on July 24, 2026, and responses are due by July 29, 2026, with the award managed by the CDC Office of Acquisition Services under the U.S. Department of Health and Human Services. The deliverables must align with CDC’s expectations for technical transparency and accountability throughout the project lifecycle.

CDC Office Of Acquisition Services

POSTED

DEADLINE

Technical Compliance & Equivalency Documentation

USDA Ars Afm Apd

POSTED

1 day ago

DEADLINE

in 20 days

AI Contract Overview

The contract requires the identification of all hazardous materials used in production or packaging processes, along with the preparation of accurate Safety Data Sheets that meet federal standards. Compliance with OSHA regulations and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-3 is mandatory, ensuring proper handling, labeling, and documentation of hazardous substances throughout the supply chain. This work demands thorough knowledge of chemical safety protocols and regulatory frameworks to maintain operational integrity and legal adherence. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid. The NAICS code 541690 indicates it falls under Other Scientific and Technical Consulting Services, highlighting the need for expert-level consulting on hazardous materials management. The solicitation was posted on July 17, 2026, with responses due by July 23, 2026, and is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance location details are not specified, but the work must align with federal defense requirements and be executed in full compliance with all applicable regulations.