Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Hazardous Materials Packaging and Labeling Compliance

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires strict adherence to OSHA and Department of Defense standards for the labeling and documentation of hazardous materials, ensuring all handling, storage, and transport procedures meet federal safety and regulatory requirements. Contractors must submit proposals for alternative labeling methods before award, allowing for evaluation and approval of any deviations from standard protocols while maintaining compliance and safety integrity. Performance is tied to Robins AFB, Georgia, with all work expected to fulfill DoD-specific hazardous materials protocols. This is a subcontract under NAICS code 561990, issued by the Aviation Supply Chain ESOC Buys division of the Department of Defense, with responses due by August 3, 2026. The solicitation is open for submission via the DIBBS portal, and while no set-aside designation is specified, all parties must demonstrate full capability in hazardous materials compliance prior to contracting. The emphasis on pre-award submission of alternative labeling proposals underscores the need for proactive compliance planning and regulatory alignment with both civilian and military standards.

General Info

Contract requires OSHA and DoD hazardous materials compliance with pre-award alternative labeling proposals for Robins AFB work.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

561990 - All Other Support ServicesView NAICS

Place of Performance

ROBINS AFB, GA, 31098-1672, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure hazardous materials are labeled and documented per OSHA and DoD standards, including submission of alternative labeling proposals prior to award.

Similar Contracts

Same NAICS industry code

Packaging and Marking Correction ServicesThe contract requires the provision of packaging and marking correction services for cable assemblies to ensure full compliance with Defense Logistics Agency standards. All work must focus on identifying and correcting nonconforming packaging or labeling during inspection, with the goal of achieving full regulatory adherence. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to respond, and it is classified under NAICS code 561990 for other support services. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division, with a response deadline of August 7, 2026, and was posted on July 27, 2026. Performance location details are not specified, but all activities must align with DLA’s technical and procedural requirements for cable assembly handling and documentation.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Government Surplus Material Inspection and HandlingThe contract requires comprehensive inspection, verification of government ownership, and proper handling of surplus materials under strict quality standards, with zero non-conformances permitted. All sampling and evaluation must adhere to MIL-STD-1916 or ASQ H1331 protocols, ensuring rigorous compliance and defect-free outcomes throughout the process. The work involves confirming the legitimacy and status of surplus items prior to handling, with no tolerance for deviations from established quality controls. This subcontract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and falls under the NAICS code 561990 for other support services. The solicitation was posted on July 27, 2026, with responses due by August 24, 2026. The place of performance and specific location details are not provided, but the work is tied to government surplus material management under federal oversight. The contract emphasizes accountability, adherence to military standards, and complete documentation to support government property control and disposition requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Military Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires the provision of compliant packaging, preservation, and labeling of precision shafts in accordance with military standards, ensuring complete adherence to all applicable regulations. This includes proper handling, containment, and documentation of any hazardous materials that may be present during the process, with full compliance to federal guidelines governing hazardous material transport and storage. All work must be performed to maintain the integrity, functionality, and safety of the shafts throughout packaging, storage, and transit phases. This is a small business set-aside subcontract under NAICS code 561990, reserved exclusively for small businesses as defined by the SBA, with a response deadline of August 6, 2026, and a posted date of July 26, 2026. Performance is mandated at Cherry Point, North Carolina, 28533-5040, under the oversight of the Department of Defense through the Land Supplier Operations Vehicle Support office. Bidders must be fully capable of meeting military specification requirements and must demonstrate expertise in packaging precision components under strict compliance protocols, with no exceptions for nonconformance.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires full compliance with MIL-STD-2073-1E for the clean, dry, preserve using Method 10, and packaging of military units, ensuring all items meet stringent defense standards for long-term storage and transport. Packaging must include proper palletization following DLA RP001 guidelines to guarantee handling, stacking, and logistical compatibility across military supply chains. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA regulations, with the NAICS code 561990 indicating it falls under Other Support Activities. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and all deliverables must be completed and submitted by the response deadline of August 3, 2026. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION and is accessible via the DIBBS portal for qualified small business contractors.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services in strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards for defense-related shipments. All work must conform to these rigorous military specifications to ensure the integrity, protection, and proper identification of equipment and materials throughout the supply chain, from storage through final delivery. The scope includes full life-cycle handling of defense assets, covering everything from material selection and environmental protection to detailed marking and documentation that meet Department of Defense requirements. This subcontract is issued under NAICS code 561990 and is managed by the Maritime Supply Chain ESOC Buys within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026. Performance is to occur at Huntsville, Alabama, with a ZIP code of 35824. The contract does not specify a set-aside classification and is accessible through the DIBBS platform for procurement purposes. Compliance with all referenced standards is mandatory, and failure to meet these requirements may result in rejection of deliverables or termination of the agreement.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and MarkingThe contract requires the provision of packaging and marking services fully compliant with MIL-STD-129 and MIL-STD-2073-1E standards, encompassing serialization, barcoding, and the accurate application of all mandated military markings. These services must ensure that all items are properly labeled, documented, and prepared for military logistics and distribution in accordance with Department of Defense specifications. The work is to be performed at a specified location in San Diego, California, with the zip code 92136-3581, and the contract type is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The North American Industry Classification System code for this solicitation is 561990, which aligns with other support services for military logistics and packaging operations. The solicitation was posted on July 26, 2026, with a firm response deadline of August 3, 2026, and is managed by the Nuclear Reactor Program under the Department of Defense. Although no specific point of contact is listed, interested parties can access full details through the official DIBBS portal using the provided link. This contract is part of a broader effort to maintain standardized, traceable, and secure packaging practices across military supply chains, emphasizing strict adherence to federal and military documentation, labeling, and logistical readiness requirements. Participation is restricted to small business concerns eligible under the SBA’s set-aside program, reflecting the agency’s commitment to supporting small business growth within national defense contracting.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Packaging and Labeling Compliance ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for a retaining seal plate in strict accordance with Department of Defense standards, specifically MIL-STD-129 and ASTM D3951, ensuring all materials meet regulatory and operational requirements for military logistics. The work must be executed to maintain integrity during transportation and storage, with precise adherence to documentation, marking, and preservation protocols defined by these standards to support seamless integration into the defense supply chain. This subcontract, issued under NAICS code 561990 by the Land Supply Chain organization within the Department of Defense, is tied to a performance location in Texarkana, Texas, with a response deadline of August 6, 2026. All proposals must demonstrate full compliance with the specified military packaging directives and the ability to deliver consistent, auditable results. The solicitation does not indicate any set-aside status or specific small business preferences, and while no point of contact is listed, the official request can be accessed via the DIBBS platform using the provided link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Commercial Packaging and Palletization ServicesThe contract entails commercial packaging and palletization services for non-hazardous medical supplies, strictly adhering to ASTM D3951 and DLA RP001 standards. This includes proper unit marking, accurate quantity labeling, and secure loading practices to ensure safe and compliant shipment. The work is classified as a subcontract under NAICS code 561990 and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF office, with performance required at Fort Stewart, Georgia, 31314-5185. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026. All packaging and handling must meet federal military logistics requirements without the use of hazardous materials, emphasizing durability, traceability, and readiness for transport within the defense supply chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling (if applicable)The contract requires the provision of hazard warning labeling and compliance services for materials classified as hazardous under FED-STD-313, aligned with OSHA HAZCOM standards and MIL-STD-129 requirements. This subcontract is focused on ensuring proper identification, labeling, and packaging of hazardous materials to meet federal and military regulatory protocols, specifically for items managed under the Medical Supply Chain MD Surg FSF. All work must be performed at the designated place of performance in Fort Stewart, Georgia, with a zip code of 31314-5185, and must adhere strictly to the technical and certification standards outlined in the referenced military and federal guidelines. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, giving potential offerors approximately one week to prepare and submit proposals. The NAICS code 561990 indicates that this service falls under Other Support Activities, which encompasses specialized support services not covered elsewhere. The contract is issued under the Department of Defense through its Medical Supply Chain division and is not subject to a specific set-aside type. Offers must ensure full compliance with labeling accuracy, durability under field conditions, and documentation required by MIL-STD-129 for military logistics and shipment tracking.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Packaging, Palletization, and Hazardous Materials ComplianceThe contract requires certified packaging, palletization, and hazardous materials documentation aligned with Department of Defense and Defense Logistics Agency standards, specifically complying with MIL-STD-129 for labeling and proper preparation of Safety Data Sheets. All work must meet stringent military specifications to ensure safe handling, storage, and transportation of regulated materials across the supply chain. The performance location is designated as Suffolk, Virginia, with a ZIP code of 23435-5000, indicating the physical delivery and compliance activities will occur at or near this site. This is a subcontract opportunity under NAICS code 561990, classified as other support services, and is managed by the Maritime Supply Chain ESOC Buys division within the Department of Defense. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, leaving a narrow window for qualified vendors to submit proposals. All participants must demonstrate proven expertise in hazardous materials compliance, military packaging protocols, and accurate documentation to satisfy DoD requirements and avoid non-compliance penalties.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Bar-Coding and MIL-STD-129 Labeling ServicesThe contract involves the application of standardized military labels and barcodes in strict accordance with MIL-STD-129 and MMS No. 1 requirements, ensuring proper identification and traceability of defense-related items through the use of NSNs, CAGE codes, and expiration dates. This work supports the U.S. Department of Defense’s medical supply chain operations by enabling accurate inventory management, logistics tracking, and compliance with federal labeling standards across the distribution network. The services are classified under NAICS code 561990 and are issued as a subcontract under the Medical Supply Chain MD Surg FSF, with performance required at Joint Base Andrews, Maryland, 20762. Proposals must be submitted by August 3, 2026, following the solicitation posted on July 26, 2026, and all labeling efforts must meet precise military specifications to ensure interoperability and operational readiness.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and preservation of hub and gear units, specifically utilizing preservation method 31 and D3/E5 containers with appropriate dunnage to ensure protection during storage and transit. All packaging activities must meet strict military standards for environmental durability, corrosion prevention, and handling integrity, with the work to be performed at the designated location in Tracy, California, zip code 95304-5000. The effort is classified as a subcontract under NAICS code 561990, indicating it falls under other support services, and is part of the Department of Defense’s Fluid Handling Division procurement initiatives. Responses to this solicitation are due by August 6, 2026, with the opportunity publicly posted on July 26, 2026, and all submissions must adhere to the technical and procedural requirements outlined in the referenced military and defense logistics standards. There is no set-aside designation specified, and the work is expected to be executed under the oversight of the Department of Defense, with performance tied to the Tracy facility. Contractors must ensure that every step of the packaging process, from material selection to container sealing and dunnage placement, strictly follows the mandated protocols to guarantee mission readiness and supply chain compliance.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation and ongoing maintenance of NIST Special Publication 800-171 controls to safeguard Covered Defense Information (CDI) held by the contractor. This includes establishing and sustaining security measures aligned with the NIST framework across all applicable systems and environments, ensuring that CDI is protected from unauthorized access, disclosure, or compromise at all times. Annual self-assessments must be conducted to evaluate compliance with each control, and any detected security incidents involving CDI must be reported promptly in accordance with federal requirements. Comprehensive documentation of all compliance activities, including policies, procedures, training records, and assessment results, must be maintained and made available upon request. This is a subcontract under the Department of Defense, specifically tied to the Aviation Supply Chain ESOC Buys initiative, with the NAICS code 541512 indicating it relates to computer systems design services. Compliance is not optional and failure to meet the NIST SP 800-171 requirements could lead to contract termination or other penalties. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, emphasizing a tight turnaround for potential subcontractors seeking to meet these cybersecurity obligations. The place of performance and point of contact are unspecified, suggesting flexibility in execution but requiring bidders to confirm operational details directly with the awarding entity.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Documentation and LabelingThe contract requires the preparation and accurate submission of Safety Data Sheets and hazard labels for all hazardous materials utilized in production processes, ensuring full compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. This work is critical to maintaining regulatory adherence and operational safety across the defense supply chain, with deliverables must meet federal mandates for hazard communication, chemical classification, and labeling consistency. The submission must be finalized and delivered by the response deadline of August 3, 2026, and the effort is structured as a subcontract under NAICS code 541690, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office. All documentation must be technically precise, legally defensible, and aligned with current federal standards for hazardous material handling and dissemination.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Quality Assurance and Statistical Sampling InspectionThe contract requires comprehensive quality assurance services including first article inspections, in-process quality checks, and final acceptance testing conducted through statistical sampling methods mandated by MIL-STD-1916 or ASQ H1331. All inspection activities must adhere strictly to these standards to ensure product conformity and reliability, with accurate documentation of test results and calibrated equipment records maintained throughout the process. Non-conformance reports must be systematically generated and managed to track, analyze, and resolve deviations from specification. This subcontract is classified under NAICS code 811212 and is issued by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and performance is expected to take place under the oversight of a defense supply chain entity. While specific location details are not provided, the work is tied to defense aviation supply chain operations requiring rigorous compliance with federal quality protocols and traceable documentation practices.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging, preservation, marking, and labeling services for cable assemblies in full compliance with DLA Packaging Requirement RP001 and MIL-STD-129 standards. This includes the use of anti-static materials to protect sensitive electronics, moisture barriers to prevent degradation during storage and transit, and precise barcode labeling to ensure full logistics traceability throughout the supply chain. All work must adhere to strict military specifications to maintain the integrity and readiness of classified and non-classified cable assemblies used in defense systems. The solicitation is classified as a subcontract under NAICS code 561910 and was posted by the Aviation Supply Chain ESOC Buys office within the Department of Defense. The response deadline is August 3, 2026, with no set-aside provisions listed. The place of performance and point of contact details are not specified, and all work must be executed to support the Department of Defense’s logistics and inventory management requirements, ensuring seamless integration into military distribution networks. Participation requires proven expertise in military packaging standards and the ability to deliver high-assurance, traceable, and environmentally protected packaging solutions.

Packaging and Labeling Services

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThe contract requires the full lifecycle production of custom electrical cable assemblies according to specific R-number specifications, encompassing design validation, component sourcing, crimping, termination, overmolding, and final inspection. All assemblies must comply with military performance and environmental standards, ensuring reliability under demanding operational conditions. The work is classified as a subcontract under NAICS code 334320, and the solicitation is managed by the Aviation Supply Chain ESOC Buys under the Department of Defense. The response deadline is August 3, 2026, with the solicitation posted on July 26, 2026, and performance obligations are expected to align with defense-grade quality and delivery timelines.

POSTED

DEADLINE

Hazardous and Radioactive Materials Compliance SupportThe contract requires the identification, documentation, and ongoing compliance oversight of hazardous and radioactive materials used in the assembly or packaging of cables, with a focus on ensuring all regulatory standards are met before any award is granted. This includes the preparation and timely submission of Safety Data Sheets (SDS) that accurately reflect the chemical and radiological properties of materials involved, ensuring full transparency and adherence to federal safety and environmental protocols. The work must be performed in alignment with accepted industry practices and government mandates, with particular attention to materials handling, storage, and disposal procedures. This subcontract is issued under the NAICS code 541620, indicating it centers on environmental consulting services, and is managed by the Department of Defense through the Aviation Supply Chain ESOC Buys office. The place of performance is designated as Fort Hood, Texas, with a response deadline of August 3, 2026, and the solicitation was posted on July 26, 2026. The nature of the work demands precise regulatory coordination, rigorous documentation, and proactive engagement with compliance frameworks to support safe and lawful operations within military supply chain activities.

Environmental Consulting Services

POSTED

DEADLINE

Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging and labeling services for power cable assemblies, strictly aligned with Department of Defense logistics standards to ensure proper storage, shipment, and identification throughout the supply chain. All packaging must meet rigorous military specifications to protect components during transit and handling, while labeling must include standardized markings for traceability, inventory control, and logistical tracking in accordance with DoD requirements. The work is designated as a subcontract under NAICS code 561910 and is being managed by the Aviation Supply Chain ESOC Buys office within the Department of Defense, with performance required at Fort Hood, Texas, zip code 76544-0000. Interested parties must submit responses by the deadline of August 3, 2026, and the opportunity was posted on July 26, 2026, through the DIBBS platform for potential subcontractors to qualify and respond.

Packaging and Labeling Services

POSTED

DEADLINE

Power Cable Assembly ManufacturingThe contract requires the manufacture of a single military-specification power cable assembly identified by NSN 6150014945182, encompassing full lifecycle execution from material procurement to final packaging. All components and processes must comply with stringent electrical performance, mechanical durability, and environmental resilience standards established for defense applications. The work involves rigorous testing protocols to ensure operational reliability under extreme conditions, with complete documentation required to validate conformance throughout assembly and quality assurance phases. The solicitation is a subcontract under the Department of Defense, issued by the AVIATION SUPPLY CHAIN ESOC BUYS, with performance to be completed at Fort Hood, Texas, 76544-0000. Bidders must submit responses by August 3, 2026, and the North American Industry Classification System code 334419 applies to the scope of work. The opportunity is not restricted by a specific set-aside designation, and while no point of contact is listed, full details and submission requirements are accessible via the provided DIBBS portal link.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Specialized Packaging & Marking for Military ShipmentThe contract requires specialized packaging, labeling, and documentation services strictly compliant with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards for the shipment of defense components to Travis AFB. All materials must meet military specifications for durability, identification, and traceability, ensuring seamless handling and inventory management within the Department of Defense logistics chain. The work is intended for a subcontractor who must adhere to exacting military-grade requirements for unit packaging, container marking, and accompanying documentation to support secure and efficient transport. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, under the NAICS code 493190 for other transportation support activities. The contract is managed by the Aviation Supply Chain ESOC Buys office under the Department of Defense, and all work must be performed with Travis AFB as the designated place of performance, specifically at zip code 94535-2918. The nature of the contract indicates a focus on precision, compliance, and readiness for military supply operations, with no set-aside provisions specified, and all bidders expected to demonstrate capability in military packaging standards and experience with defense logistics environments.

Other Warehousing and Storage

POSTED

DEADLINE

Defense Logistics Compliance & Certification ManagementThe contract requires comprehensive regulatory compliance documentation, certification management, and reporting services tailored to defense procurement standards, specifically addressing FAR and DFARS requirements, hazardous materials handling, and end-to-end supply chain traceability. The provider must ensure all deliverables align with Department of Defense mandates, maintaining accurate records and certifications to support the integrity of the supply chain for aviation and logistics systems. This includes managing documentation for material compliance, identifying and mitigating risks associated with controlled substances, and validating the origin and movement of components throughout the procurement lifecycle. The contract is classified as a subcontract under NAICS code 541611 and is being solicited by the Aviation Supply Chain ESOC Buys Office within the Department of Defense, with performance required at Travis Air Force Base, California, zip code 94535-2918. Responses are due by August 3, 2026, and the opportunity is posted on the DIBBS platform with the reference number SPE4A026T4051. There is no designated set-aside classification, and the solicitation seeks qualified vendors capable of delivering persistent, audit-ready compliance frameworks that meet the stringent standards of military logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Precision Fastener Manufacturing – Shear Bolt (NSN 5306016596412)The contract requires the manufacture and supply of military-grade shear bolts identified by NSN 5306016596412 and part number BACB30NN4K44, with strict adherence to defense logistics standards and full material traceability throughout production. Each unit must be accompanied by comprehensive quality certification to ensure compliance with aerospace and military specifications, guaranteeing reliability under extreme operational conditions. The deliverables are destined for Travis AFB, with the place of performance specified under the zip code 94535-2918, emphasizing the need for precise logistics coordination and timely delivery aligned with defense operational timelines. This is a subcontract issued under NAICS code 332721 for fastener manufacturing, solicited by the Aviation Supply Chain ESOC Buys division of the Department of Defense. The solicitation was posted on July 26, 2026, with a deadline for responses set for August 3, 2026, allowing for a limited window for qualified manufacturers to submit proposals. While no set-aside designation is specified, the procurement demands high levels of technical precision, documentation rigor, and adherence to defense-grade quality controls, targeting suppliers with proven experience in producing critical fasteners for military aviation applications. The online solicitation link provides access to detailed technical requirements and submission protocols for interested contractors.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Controlled Unclassified InformationThe contract requires the implementation of NIST SP 800-171 safeguards across systems handling Controlled Unclassified Information to ensure compliance with DFARS 252.240-7997 assessment requirements. This subcontract is focused on strengthening cybersecurity posture by aligning technical and administrative controls with federal standards for protecting sensitive but unclassified data within the Department of Defense supply chain. The work must be performed at Robins AFB, Georgia, with a response deadline of August 3, 2026, and is categorized under NAICS code 541512 for computer systems design services. All activities must support the evaluation and validation of compliance as mandated by the Aviation Supply Chain ESOC Buys division, ensuring systems meet rigorous defense contractual security obligations.

Computer Systems Design Services

POSTED

DEADLINE