Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HAZMAT EQUIPMENT, SPECI

Active
SPE8E9-26-T-3413Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE8E9-26-T-3413, is for the procurement of 50 pairs of special hazmat equipment gloves, specifically New Pig Corporation part number WPL588-10 under NSN 4240-01-438-8738. The items are classified as critical application items and are subject to a non-extendable shelf life of 60 months. The order is managed by the Department of Defense through the Construction and Equipment MRO Service. Delivery is required within 33 days, with a final required delivery date of May 3, 2027. Shipping is FOB Origin and destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Additionally, the supplier must comply with specific hazardous materials packaging and shipping regulations and ensure the removal of any government identification from non-accepted supplies.

General Info

DoD contract SPE8E9-26-T-3413 for 50 hazmat gloves delivered by May 3, 2027.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE8E9-26-T-3413

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
View Agency Profile
Office AddressUSA
Contacts
Matthew Kruc
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HAZMAT EQUIPMENT,SPECIAL
HAZMAT EQUIPMENT, GLOVES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NEW PIG CORP
TIPTON, PA
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
STANDARD
CRITICAL APPLICATION ITEM
NEW PIG CORPORATION 1JA49 P/N WPL588-10
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017829001 0001 PR 50.000
NSN/MATERIAL:4240014388738
DELIVERY (IN DAYS):0033
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8E9-26-T-3413
SECTION B
PR: 7017829001 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:05/03/2027
SPE8E9-26-T-3413 NSN/Part Number: 4240-01-438-8738 Quantity: 50 PR Purchase Request: 7017829001QTY: 50 Delivery: 33 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
DIBBS
CARABINER, PULLEY
Solicitation # SPE1C1-26-T-1616
This contract is for the procurement of two carabiner pulleys under solicitation SPE1C1-26-T-1616 for the Department of Defense. The order specifies a delivery timeframe of 20 days after receipt of the order, with the destination for inspection and acceptance being Camp Pendleton, California. Shipping must be conducted via traceable means, and the use of parcel post is strictly prohibited. Strict labeling and packaging requirements are mandated, including the use of individual bar-coded paper tags featuring both a 13-digit National Stock Number and a 12-digit Universal Product Code. Packaging must adhere to DLA packaging requirements and MIL-STD-129, with specific guidelines for hazardous and non-hazardous materials. Quality and technical standards are governed by the DLA Master List, and inspection shall be performed in accordance with FAR part 52.246-2.
C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
MASK, AIR FILTERING
Solicitation # SPE8E6-26-T-4195
This contract is for the procurement of air filtering masks, specifically 3M Company part number 7100266132, under solicitation SPE8E6-26-T-4195. The order consists of 19 boxes, with each box containing 12 cartons of 20 respirators, totaling 240 respirators per box. The items are identified by NSN 4240-01-494-3562 and must meet NIOSH approval TC-84A-2669. Delivery is required within 33 days after the order, with a need ship date of September 27, 2026, and a final delivery date of October 1, 2026. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must adhere to DLA requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous commercial packaging. Inspection and acceptance will take place at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, ANTI-VIBRATI
Solicitation # SPE8E6-26-T-4192
This contract, issued by the Defense Logistics Agency, is for the procurement of 200 pairs of anti-vibration gloves under solicitation number SPE8E6-26-T-4192. The required material is identified by NSN 4240-01-577-0589 and part number US41340, with approved suppliers including Impacto Protective Products Inc and USA Sewing Inc. Delivery is required within 20 days, with a final required delivery date of August 6, 2026, shipped FOB Origin to the Puget Sound Naval Shipyard in Bremerton, Washington. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging standards based on whether the material is classified as hazardous under FED-STD-313. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. Inspection and acceptance will take place at the destination.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
FIELD PACK
Solicitation # SPE1C1-26-T-1615
This contract, identified as SPE1C1-26-T-1615, is a solicitation from the Department of Defense C and T Supply Chain for the procurement of six Blackjack 100 Multicam-L field packs from Mystery Ranch LLC. The order is associated with NSN 8465-01-696-4281 and Purchase Request 7017807851. Delivery is required within 20 days after order, with a final required delivery date of August 13, 2026. The shipment is designated for delivery FOB Destination to the US Army at Fort Bliss, Texas. The contractor must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. All items must be shipped via traceable means, and the contractor is prohibited from using parcel post.
C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
FLAG, NATIONAL
Solicitation # SPE1C1-26-Q-0406
This firm fixed price contract is for the procurement of 150 National Flags of Malaysia, Type I, Class 1, made of cotton bunting with dimensions of 6 feet by 9 feet. The items must be manufactured in accordance with specification MIL-DTL-2692 and drawing 6-3-91. The contractor is required to submit two first article samples for visual, dimensional, and shade examination, with a thirty day evaluation period for notification of results. The agreement mandates strict adherence to DLA packaging requirements, supply chain traceability documentation, and quality conformance inspection. Inspection and acceptance will occur at the destination, with delivery required within 183 days after the order. Shipping is designated as FOB destination to Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of June 1, 2027.
C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
BAG, AMMUNITION
Solicitation # SPE1C1-26-T-1614
This contract is for the procurement of 30 ammunition bags, identified by NSN 8465-01-706-1419 and part number MGM9P2X1-BK from Resilience Tactical LLC. The order is managed under solicitation number SPE1C1-26-T-1614 by the Department of Defense C and T Supply Chain. Delivery is required within 20 days, with a final required delivery date of August 12, 2026. The shipment is destined for the USS Iwo Jima LHD 7 via vessel shipment and must be handled by the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination, and the contract incorporates specific technical and quality requirements including the removal of government identification from non-accepted supplies and the handling of covered defense information.
C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M1-26-T-236H
This contract specifies the procurement of a nonmetallic hose assembly with a half-inch inner diameter and a 300-inch working length, designated as a critical application item under part number H42508N-608-608-30000 and NSN 4720012722903. The item is classified as a Type I (Code W) with a non-extendable shelf life of 120 months, governed by the DLA Master List of Technical and Quality Requirements, which controls all technical and quality specifications referenced in the contract. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific preservation methods, wrapping, and labeling in accordance with MIL-STD-129, with special marking for shelf life. The product is to be delivered FOB origin in a quantity of 53 units, with zero tolerance for variance in quantity, and inspected and accepted at the destination point. The delivery window is 67 days from the contract award, with a required ship date of April 7, 2026, and the delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California. Transportation and freight logistics are subject to DLA Procurement Notes C19 and C20, and the contract is issued under solicitation SPE7M1-26-T-236H with a unit price of $53.00 per unit and a total value of $2,809.00. The contract is managed by the Department of Defense’s Maritime Supply Chain under the NAICS code 315990, with primary point of contact Louisa Dougan.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 315990
New
DIBBS
NBC FILTER ASSEMBLY
Solicitation # SPE8E6-26-T-4202
This contract is for the procurement of three NBC Filter Assemblies, identified by NSN 4240-01-589-1789 and part number T00008-5083 from HDT Expeditionary Systems Inc. The agreement is managed by DLA Distribution San Joaquin under solicitation number SPE8E6-26-T-4202. Delivery is required within 160 days, with a need ship date of February 1, 2027, and a final required delivery date of February 22, 2027. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, specifically referencing RP001 and MIL-STD-129 for marking and labeling. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, and the contract notes that covered defense information potentially applies to this procurement.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 315990
New
DIBBS
CARABINER, PULLEY
Solicitation # SPE1C1-26-T-1567
The contract specifies the procurement of carabiners and pulleys under NSN 8465-01-613-1241, with a total quantity of 2 units priced at $2.00 each, delivered FOB destination within 20 days of order placement. All items must be individually bar-coded with a 13-digit National Stock Number and a government-assigned 12-digit Universal Product Code, printed on standard bleached sulfate paper tags with a 100-pound basis weight, featuring a hole for attachment and compliant with thermal transfer or direct printing standards. The barcodes must remain visible and scannable when the item is folded and packaged as required, with no damage to the item permitted. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, and bulk packaging is prohibited. If the material is non-hazardous per FED-STD-313, it must be packaged according to ASTM D3951, but all DLA Master List of Technical and Quality Requirements supersede this standard. Hazardous materials must be packaged under IP025 requirements. Palletization must follow RP001 DLA Packaging Requirements, and unit per pack is one ea. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. Delivery must be shipped via traceable means—parcel post is prohibited. Deliveries are directed to Camp Lejeune and Camp Kinser, with a required delivery date of August 3, 2026. Compliance with MIL-STD-1916 or ANSI/ASQ Z1.4 is required for sampling inspection, as MIL-STD-105E has been canceled.
C AND T SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 315990
New
SLED
Uniform Hats
Solicitation # 304T-27-201A3.3
The Statewide Procurement Division of the Comptroller of Public Accounts is seeking sealed responses for the procurement of uniform felt hats, primarily intended for use by Texas Parks and Wildlife. This solicitation, identified as 304T-27-201A3.3, is managed by the state of Texas under a SLED organization type. Interested vendors must submit their responses by the deadline of September 3, 2026, at 7:30 PM. The primary point of contact for this procurement is Jennifer Walls, and further details or submissions can be processed through the Texas SmartBuy portal.
Comptroller of Public Accounts

POSTED

about 6 hours ago

DEADLINE

in 23 days
View Details
NAICS: 315990
New
Federal
Personal Protection Equipment GlovesThe contract pertains to the procurement of personal protective equipment gloves intended for correctional staff within the Federal Prison System under the Department of Justice. It is classified as a forecast opportunity, indicating a future solicitation expected to support the safety and operational needs of Bureau of Prisons personnel. The procurement is designated as full and open/unrestricted, allowing broad participation from vendors, including small businesses, which is encouraged given the involvement of a dedicated small business point of contact. The contract falls under NAICS code 315990, relating to apparel accessories manufacturing, specifically gloves for protection purposes. The place of performance is identified as Washington, District of Columbia, where the Bureau of Prisons operates. Key contacts include Calvin Price as the main point of contact and a named small business specialist to assist potential small business vendors. The contract aims to ensure correctional staff are equipped with adequate personal protective gloves, enhancing their safety while performing their duties.
Federal Prison System / Bureau Of Prisons

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 315990
New
DIBBS
Manufacture and Supply of Involuntary Restraint Straps
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

NAICS: 541690
New
DIBBS
Technical Data Package and Drawing Compliance Support
Other Scientific and Technical Consulting Services

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
LED Headlight Component Manufacturing
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 323111
New
DIBBS
LABEL
Solicitation # SPE8E9-26-T-3415
Solicitation SPE8E9-26-T-3415 is a procurement request from DLA Troop Support Construction and Equipment MRO SVC I for one roll of identification label markers (NSN 7690-01-077-4894), with a total estimated value of 20.09 dollars. The contract requires delivery to Marine Aviation Logistics Squadron 39 at Camp Pendleton, California, within 20 calendar days after receipt of the award. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Because the item is a Type I shelf-life item, it must be delivered with at least 85 percent of its 12-month shelf life remaining, and markings must include the cure and expiration dates in calendar quarter and year format. Additionally, the contract mandates compliance with hazardous material regulations, including the prohibition of intentionally added mercury and the requirement for shock-proof containment for mercury-containing instruments per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. The contractor must also comply with various DFARS and FAR clauses regarding cybersecurity, the safeguarding of covered defense information, and the prohibition of certain telecommunications equipment. Proposals must be submitted electronically via the DIBBS portal by August 24, 2026.
Commercial Printing (except Screen and Books)

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3417
This contract is for the procurement of titanium alloy metal sheets measuring 0.045 inches thick, 36 inches wide, and 96 inches long. The order consists of two sheets under NSN 9535013607628, with a delivery timeframe of 160 days. The material must be supplied in whole feet lengths and comply with specific technical standards, including SAE AMS4911T, ASTM A700-14, and SAE AMS2809B. A critical requirement of this procurement is that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contractor must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the DLA contract delivery order number, NSN, and manufacturer details. Markings must be legible, waterproof, and applied via stamping or stenciling, though adhesive labels are permitted for specific small-diameter items. Delivery is set for the DLA Distribution San Joaquin facility in Tracy, California.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E9-26-Q-0680
This contract is a firm fixed price solicitation for the procurement of one axial fan impeller, part number 03X00356-0104. The delivery is required within 60 days after order receipt, with inspection and acceptance occurring at the destination. The item is destined for the USS Kearsarge LHD 3 and must be shipped via the fastest traceable means, specifically excluding the use of parcel post. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129, while encouraging the avoidance of plastics for wrapping and cushioning. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract notes that covered defense information may apply.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339115
New
DIBBS
SPECTACLES, INDUSTRIAL
Solicitation # SPE8E9-26-T-3414
This contract is a solicitation issued by the Department of Defense for the procurement of three units of industrial spectacles, specifically Wiley X Part Number 408, under NSN 4240-01-510-7851. The agreement specifies a delivery timeline of 20 days after order, with the original required delivery date set for August 13, 2026. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination in JBPHH, Hawaii. The procurement is subject to strict DLA packaging, marking, and shipping requirements, including compliance with MIL-STD-2073-1E and MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The primary point of contact for this solicitation is Matthew Kruc.
Ophthalmic Goods Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, CENTRIFUG
Solicitation # SPE8E9-26-Q-0681
This contract is for the procurement of four centrifugal fan impellers, identified by NSN 4140-01-685-5438 and Kohler Co Engine Plant part number GM50644. The agreement is established as a firm fixed price contract with a delivery requirement of 60 days after order. Inspection and acceptance will occur at the destination, and the shipping terms are FOB origin. The supplier must adhere to specific technical and quality requirements, including source approval documentation, DLA packaging standards, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Delivery is directed to the Southwest Regional Maintenance Center in San Diego, California, via the fastest traceable means, specifically excluding parcel post.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3265
The contract mandates the procurement of 200 pieces of 316L stainless steel plate, hot rolled and annealed, with a thickness of 0.1875 inches, width of 36 inches, and length of 96 inches, each weighing approximately 187.92 pounds per piece. All material must conform to ASTM A240/A240M-26 and be supplied in whole-foot lengths only; no partial feet are permitted. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN 9515-00-204-4624, specification revision, alloy type, manufacturer's name, heat and lot number, and dimensions. Markings must be applied via stamping (excluding die stamp) or stenciling, be legible to the unaided eye, waterproof, stable under normal handling, and free from contamination. A Certificate of Quality Compliance, also known as mill-material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E with preservation method ZZ per ASTM A700, and marking must follow MIL-STD-129R(3). Adhesive labels are required for items under 0.250 inches nominal outer diameter, and tags are acceptable for wire. Palletization must comply with DLA’s RP001 packaging requirements. This procurement is a total small business set-aside under NAICS code 331221, governed by FAR 19.5, and requires all suppliers to be listed on the DLA Troop Support Qualified Suppliers List for Distributors (QSLD) issued in June 1994. Failure to use an approved QSLD distributor constitutes an unauthorized substitution and may result in criminal penalties. The QSL program waives certain quality conformance inspections including QAP-EQ003, ASQ H1331, and RQ006, so long as the supplier is on the approved list. The item is designated as a critical application item, and covered defense information potentially applies. Delivery is FOB origin with a 71-day delivery window to the DLA Distribution New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at destination. Invoicing must be submitted electronically via WAWF, and all offerors must complete representations and
Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335132
New
DIBBS
HEADLIGHT
Solicitation # SPE8E9-26-Q-0676
This contract specifies the procurement of 3,640 LED headlights identified by NSN 6220-01-616-1079 under solicitation SPE8E9-26-Q-0676, with delivery required within 90 days after award. The item must comply with technical and quality requirements referenced by R and I numbers from the DLA Master List, including packaging standards under RP001 that mandate use of standard 40x48 inch ANSI MH1 pallets, a maximum load weight of 3,000 pounds, and a height limit of 54 inches per unitized load, with specific stacking restrictions for ISO containers. First Article Testing is mandatory, requiring submission of seven switch assembly samples and sixteen headlight samples, with the contractor responsible for generating a comprehensive First Article Test Report that includes all inspections, test data, certifications, and objective evidence to demonstrate compliance with drawings 12484558 and 13013615, as well as other referenced technical data packages. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and unit loads must be double-wrapped without cushioning material. The inspection and acceptance point is at the destination, with FOB origin and transportation directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits removal of government identification from non-accepted supplies and includes applicable hazardous materials packaging requirements. All documentation must reflect DLA’s authorized unit of issue, and the government retains rights to review and verify conformity using contractor-submitted test records and supporting data.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335139
New
DIBBS
LAMP, CARTRIDGE
Solicitation # SPE8E9-26-Q-0678
This contract, identified as SPE8E9-26-Q-0678, is a firm fixed price procurement for one cartridge lamp under NSN 6240-01-012-8421. The order specifies a delivery timeline of 60 days after receipt of the order, with inspection and acceptance occurring at the destination. The shipment is destined for a US Army distribution point in Powidz, Poland, and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Depending on whether the material is classified as hazardous under FED-STD-313, packaging must follow either TQ requirement IP025 or ASTM D3951. Additionally, the contract incorporates technical and quality requirements from the DLA Master List and notes that covered defense information potentially applies to this procurement.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E9-26-T-3418
This solicitation, issued by the Department of Defense under the agency Construction and Equipment MRO SVC I, is for the procurement of three tubeaxial fans, identified by NSN 4140-00-335-2863. The contract is categorized as a fully competitive acquisition based on military and federal specifications. The required delivery timeframe is 160 days after order, with the place of performance located at Robins Air Force Base. Compliance with several critical standards is required, including DLA packaging requirements (RP001), identification marking of U.S. military property per MIL-STD-130N, and the removal of government identification from non-accepted supplies (RQ011). Technical and quality requirements are governed by the DLA Master List, and detailed drawings are available through the contracting officer upon the signing of a rights guard certificate. The solicitation is open for responses until August 24, 2026.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details