Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

HazMat Packaging and Shipping Specialist

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for HazMat Packaging and Shipping Specialists involves the specialized handling, labeling, and transportation of hazardous battery materials for prime contractors supporting Department of Defense supply contracts. The selected provider must ensure all batteries are packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129 and MIL-STD-130N, while providing necessary MSDS/PSDS documentation per FED-STD-313. The contractor is required to maintain DOT Hazardous Materials certification and utilize HazMat-certified transport vehicles to deliver all documented shipments to the DLA Distribution Depot Oklahoma located at Tinker AFB. This opportunity falls under NAICS code 484220, with a response deadline set for October 26, 2026.

General Info

HazMat packaging and shipping of batteries to Tinker AFB by October 26, 2026.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

484220 - Specialized Freight (except Used Goods) Trucking, Local

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0277.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BATTERY, NONRECHARGEABL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, labeling, and transportation of hazardous battery materials for prime contractors on DLA supply contracts. Packages batteries per MIL-STD-2073-1E and applies markings per MIL-STD-129 and MIL-STD-130N. Provides MSDS/PSDS per FED-STD-313. Requires DOT Hazardous Materials certification and HazMat-certified transport vehicles. Delivers packaged and documented shipments to DLA Distribution Depot Oklahoma.

Similar Contracts

Same NAICS industry code

Specialized Equipment Freight and Delivery ServicesThis subcontract for Specialized Equipment Freight and Delivery Services involves the transport and delivery of five mobile commercial kitchen ovens to Camp Keyes in Augusta, Maine. Supporting primes on DLA supply contracts, the service provider is responsible for utilizing freight vehicles to move the equipment and ensuring all packaging and marking strictly adhere to ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. The project is managed under NAICS code 484220 for the Department of Defense Subsistence FSE Supply Chain. All equipment must be delivered within a 30-day window on a FOB Destination basis for final acceptance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging, preservation, and transportation for prime contractors supporting DLA Distribution supply contracts. The scope of work requires strict adherence to MIL-STD-129 and MIL-STD-2073-1E for marking and packaging, as well as ASTM A700 for preservation. The contractor is responsible for the secure handling and delivery of 48 by 96 inch steel plates using heavy-haul transport equipment. The services are designated for the Department of Defense, specifically the DDSP New Cumberland Facility, with final delivery destinations in New Cumberland, Pennsylvania, and Tracy, California. This opportunity falls under NAICS code 484220 and was posted on October 16, 2026, with a response deadline of October 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Traceable Freight Transport to Letterkenny Army DepotThis subcontract involves the transport of electrical components for prime contractors fulfilling DLA supply contracts. The service requires the movement of palletized goods to Building 9950 at the Letterkenny Army Depot in Chambersburg, Pennsylvania, with a strict delivery deadline of 30 days from the order date. To ensure compliance with DLA shipping and receiving protocols for Army Depots, the contractor must utilize the fastest traceable shipping and tracking systems available. The use of parcel post is strictly prohibited to maintain full traceability of all transported materials.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

HazMat Packaging and Freight ForwardingThis small business set-aside subcontract involves providing specialized hazardous material packaging, marking, and freight forwarding services for prime contractors supporting DLA Weapons Support Land Supplier Operations. The scope of work specifically requires the packaging and marking of batteries in accordance with MIL-STD-2073-1E and MIL-STD-129, palletization per RP001, and strict adherence to IP025 shipping standards and HAZDEC form management. All shipments must be delivered to DLA Distribution San Joaquin using certified transport vehicles. To be eligible, the provider must maintain current HazMat shipping certifications to ensure all documented shipments meet rigorous safety and regulatory requirements.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT Type

POSTED

about 7 hours ago

DEADLINE

AV Logistics and Hauling

Governor – Executive

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Finished Compost Transportation Services

Solicitation # RFP-VC-26-007

The Inland Empire Regional Composting Authority is soliciting proposals under RFP-VC-26-007 for finished compost transportation services from its facility in Rancho Cucamonga, California. The selected contractor will provide drivers and equipment, such as tractor-trailers and straight-trucks, to transport approximately 15% to 25% of the facility's monthly production of 20,000 cubic yards. Deliveries will range from a 20-mile radius up to 350 miles away, including onsite shuttling. The anticipated project start date is February 1, 2027, with an initial five-year term and options for one-year extensions. Proposals must be submitted electronically via PlanetBids by November 12, 2026, and must include a firm fixed-price rate sheet based on mileage brackets and a proposed fuel surcharge equation. Evaluation will be based on price, payment terms, the proposed work plan, organizational experience, and any exceptions taken to the RFP. This is a prevailing wage contract governed by California law and Labor Code Section 1770, requiring contractors to be registered with the Department of Industrial Relations. Key contractual requirements include the provision of payment and performance bonds equal to the contract price and strict adherence to CAL OSHA, Federal OSHA, and CDFA regulations. The contractor is subject to random bi-monthly joint inspections and may be required to submit monthly vehicle self-inspection reports. Payments are processed within 30 days of invoice approval by the Project Manager. The solicitation is set aside for various small business categories, including SBA certified Veteran, Women-Owned, and HUBZone small businesses.

Inland Empire Utilities Agency

POSTED

about 7 hours ago

DEADLINE

Construction Material HaulingThis subcontract opportunity with the Texas Department of Transportation involves construction material hauling for the Aviation Division. The selected contractor will be responsible for transporting electrical conduit, soil, and construction debris for prime contractors, specifically delivering materials to and removing waste from Major Samuel B. Cornelius Field. Services must be performed using dump trucks or flatbeds, and the contractor is required to ensure the legal disposal of all waste materials. A critical requirement for this project is the ability to operate within strict airfield security parameters. Interested parties should note that the response deadline is November 10, 2026. The work falls under NAICS code 484220, focusing on specialized freight trucking for construction support.

Texas Department of Transportation

POSTED

about 7 hours ago

DEADLINE

Specialized Waste Hauling ServicesThis subcontract for Specialized Waste Hauling Services involves the transport of wet biosolids from wastewater treatment plants to designated processing sites for prime contractors on Pierce County projects. The selected provider must utilize vacuum trucks and leak-proof tankers to ensure the prevention of environmental contamination, operating under FOB destination delivery terms. Compliance with Department of Transportation regulations is mandatory, and all operators must possess valid CDL licenses with specific waste and environmental endorsements. This opportunity is managed by the Procurement and Contract Services agency in Washington, with a response deadline set for October 30, 2026.

Procurement and Contract Services

POSTED

about 8 hours ago

DEADLINE

Concrete Haulage and TippingThis subcontract for Concrete Haulage and Tipping involves providing transportation and legal disposal services for concrete debris on Town of Whitby facility projects. The selected contractor will be responsible for the loading, hauling, and unloading of concrete fragments to approved facilities utilizing roll-off containers and dump trucks. To ensure compliance, the contractor must maintain licensed waste hauler status and possess all necessary permits for approved tipping facilities. Verification of legal disposal is a critical requirement, necessitating the delivery of weigh bills, tipping receipts, and disposal manifests. Interested parties must submit their responses by November 12, 2026, in accordance with the solicitation posted on October 16, 2026. This opportunity falls under NAICS code 484220 and supports prime contractors operating within the Town of Whitby.

POSTED

about 8 hours ago

DEADLINE

Logistics and Specialized HaulingThis subcontract for Logistics and Specialized Hauling involves the transport and delivery of new buses and heavy components for prime contractors working on City of Edmonton transit projects. The service provider is required to use heavy-haul trailers capable of transporting transit buses in accordance with Incoterms 2020, ensuring all vehicles and goods are delivered to designated City facilities. Deliveries must be coordinated to occur on weekdays between 8:00 a.m. and 4:00 p.m. within Edmonton. The solicitation was posted on October 16, 2026, with a response deadline of November 30, 2026, falling under NAICS code 484220.

The City of Edmonton

POSTED

about 9 hours ago

DEADLINE

in about 1 month

F.O.B. Destination Heavy Equipment TransportThis small business set-aside subcontract involves the freight transport and delivery of heavy ballistic panels for prime contractors supporting W6QM Micc-Ft Drum projects under the Department of Defense. The scope of work requires the hauling of 20 panels, each weighing approximately 450 lbs, on an F.O.B. Destination basis to a specified government site. To ensure safe transit and delivery, the contractor must utilize flatbed or box trucks equipped with lift-gates and appropriate securement equipment to prevent load shifting. This opportunity falls under NAICS code 484220 and is designated as a total small business set-aside.

W6QM Micc-Ft Drum

POSTED

about 12 hours ago

DEADLINE

Medical Equipment Delivery and InstallationThis subcontract, titled Medical Equipment Delivery and Installation, involves the transport, delivery, and on-site installation of heavy medical equipment for prime contractors working on Department of Veterans Affairs projects. Specifically, the scope of work includes the transport and assembly of chiropractic tables at the George E. Wahlen VA Medical Center and the Ogden VA Community Based Outpatient Clinic. The contractor must utilize specialized equipment capable of moving medical furniture with lifting capacities of up to 450 lbs to ensure all equipment is delivered and fully operational at the two designated locations. Managed by the Network Contract Office 19 for the Department of Veterans Affairs, this opportunity is designated as a Total Small Business Set Aside under NAICS code 484220. The performance of the contract will take place in Salt Lake City and Ogden. Interested parties should note the response deadline of October 30, 2026.

Network Contract Office 19 (36C259)

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Lithium/Manganese Dioxide Battery ManufacturerThis subcontract with the Department of Defense, managed by Depot Oklahoma, requires the manufacture of nonrechargeable, sealed 3.1 Volt Lithium/Manganese Dioxide batteries for prime contractors on DLA supply contracts. The manufacturer must fabricate the batteries according to specification 12255 6092PS079 and associated technical drawings, utilizing specialized sealing equipment for the cells and testing equipment to verify the 3.1 Volt output. The scope of work includes the execution of First Article Testing and Production Lot Testing to ensure quality and compliance. The final deliverables consist of 3,759 finished battery units under NSN 6135-01-340-7883, along with 100 units dedicated to First Article Testing. Performance for this contract is centered at Tinker AFB.

Storage Battery Manufacturing

POSTED

DEADLINE

CASE, LIFE RAFT

Solicitation # SPE8E5-27-Q-0019

POSTED

DEADLINE

BATTERY, NONRECHARGEABL

Solicitation # SPE7L7-27-T-0277

Solicitation SPE7L7-27-T-0277 is for the procurement of 3,759 nonrechargeable Lithium/Manganese Dioxide, Sealed 3.1 Volt batteries, identified by NSN 6135-01-340-7883. The contract requires strict adherence to controlling reference specification 12255 6092PS079 and associated drawings for all material and dimensional requirements. Key quality mandates include First Article Testing (FAT) and Production Lot Testing (PLT). For the FAT, the contractor must deliver 100 units within 90 calendar days to the Naval Surface Weapons Center, Crane Division. The government has allocated $45,000.00 for testing costs, which will be factored into the evaluation of offers. The items are classified as critical application items with a non-extendable shelf life of 60 months. Delivery is FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with various military standards is mandatory, including MIL-STD-129 for marking, MIL-STD-130N for identification, and MIL-STD-2073-1E for packaging. Because the batteries are hazardous materials, the contractor must provide MSDS/PSDS per FED-STD-313 and ensure labeling conforms to the Hazard Communication Standard and IP025. Inspection and acceptance will occur at the point of origin. The solicitation is open to full and open competition, with specific price evaluation preferences available for certified HUBZone small business concerns.

Battery Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services involves providing military-grade packaging for prime contractors supporting DLA Troop Support equipment contracts. The scope of work requires the packaging of 58 units in accordance with MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. To meet specific packaging data requirements, including QUP:001 and Pres Mthd:10, the provider must utilize MIL-SPEC crates, moisture barriers, and industrial labeling equipment to ensure all units are ready for FOB Origin shipment. The project is managed by the Department of Defense through Depot Oklahoma and will be performed at Tinker AFB. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510. Interested parties must respond by October 26, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Ion Exchange Resin and Media SupplyThis subcontract opportunity, managed by the Department of Defense for Depot Oklahoma, involves the supply of specialized ion exchange resins for prime contractors working on DLA Troop Support water purification projects. The required materials include high-purity cationic and anionic resins that must strictly adhere to NSN 4610-01-313-6086 specifications. Deliverables may be provided as bulk or pre-measured resin media, and the supplier is required to provide certificates of analysis regarding purity and capacity, as well as Safety Data Sheets in compliance with FAR 52.223-3. The project is designated as a Total Small Business Set-Aside under NAICS code 325180, with the place of performance located at Tinker AFB. Interested parties must submit their responses by October 26, 2026.

Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

Ion Exchange Water Demineralizer ManufacturingThis subcontract, issued by the Department of Defense for Depot Oklahoma, involves the manufacture and supply of 58 ion exchange water demineralizer units for prime contractors on DLA Troop Support projects. The scope of work includes the fabrication of vessels and internal components, the integration of ion exchange resins, and strict adherence to RA001 technical and quality requirements as specified in the DLA Master List. Additionally, the contractor must ensure a 60-month shelf life for the units and provide all necessary Source Approval Request documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 333310, with performance taking place at Tinker AFB. Interested parties must have responded by the deadline of October 26, 2026. The contract emphasizes rigorous testing and compliance to meet the specific operational standards required for military water demineralization systems.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Solid Rubber SheetsThis subcontract involves the manufacture and supply of 192 solid rubber sheets under NSN 9320-01-354-4428 for prime contractors supporting Department of Defense supply contracts. The work is managed by Depot Oklahoma and will be performed at Tinker AFB. All materials must be produced according to Basic CID A-A-59588B Rev B and must be certified as both asbestos-free and mercury-free. Strict compliance is required for marking and packaging, with items marked every three feet per MIL-STD-190 and MIL-STD-130N and packaged in accordance with ASTM D3951 and RP001. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 326299.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Electric Soldering Iron Heating Unit SupplierThis subcontract involves the supply of 46 electric soldering iron heating units for prime contractors supporting Department of Defense contracts via Depot Oklahoma. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 3439015678016 specifications, with a specific prohibition against the intentional addition of mercury. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, with delivery terms set as FOB Origin. The agreement requires full compliance with DLA quality requirements and DFARS regulations regarding the safeguarding of covered defense information. Performance is centered at Tinker AFB, and the contract falls under NAICS code 332216. Interested parties must meet the response deadline of October 26, 2026.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Aluminum Alloy 6061 T-6 Bar SupplyThis subcontract involves the supply of 178 feet of round, cold-finished aluminum alloy 6061 T-6 metal bars to support prime contractors for Department of Defense DLA supply contracts. The required materials must be 1.625 inches in diameter and provided in lengths of 10 to 12 feet. All bars must strictly adhere to SAE AMS4117M, ASTM B660, and ASTM B666/B666M-20 standards, and the supplier must provide Mill-Material Certification and maintain a QSLD listing. Logistical requirements specify that packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The materials are to be delivered FOB Origin to Tinker AFB in Oklahoma. This procurement falls under NAICS code 332112 and is managed by Depot Oklahoma.

Nonferrous Forging

POSTED

DEADLINE

Aircraft Cockpit Light Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 97 aircraft cockpit light units, specifically NSN 6220-01-6516453, for prime contractors under Department of Defense DLA supply contracts. The contractor is responsible for producing or sourcing part number 721-1237-1028 in strict accordance with Hoffman Engineering specifications. Performance will take place at Tinker AFB, falling under NAICS code 334516. The agreement mandates rigorous adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and Covered Defense Information protocols. All deliverables must be marked according to MIL-STD-129 and packaged following RP001 and ASTM D3951 guidelines to ensure compliance with agency regulations.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Carbon Steel Sheet Supplier (NSN 9515008463355)This subcontract involves the supply of precision-cut carbon steel sheets for prime contractors supporting Department of Defense projects at the DLA Distribution Depot Oklahoma located at Tinker AFB. The requirement specifies six sheets of COMP 1020 or COMP 1025 carbon steel featuring a cold finish and annealing, with precise dimensions of 0.063 inches in thickness, 36 inches in width, and 96 inches in length. To be eligible, suppliers must maintain a QSDL listing for FSGs 95 and 96 and ensure full compliance with the Buy American Act. Deliverables must include waterproof marking and official Mill-Material Certification. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 331221.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Carbide End Milling Cutter SupplierThis subcontract involves the supply of precision-manufactured carbide end milling cutters to prime contractors supporting DLA supply contracts for Depot Oklahoma. The required components are single end, multi-flute, right-hand cut ball end cutters featuring a 0.312 inch diameter and a 2.500 inch overall length. All deliverables must be shipped FOB Origin and strictly adhere to ASTM D3951 packaging standards and MIL-STD-129 marking requirements. The contract is managed under NAICS code 333515 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties must note the response deadline of October 26, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS