Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HEADSET-MICROPHONE

Active
SPE7M1-26-U-4735Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of headset-microphone units under solicitation SPE7M1-26-U-4735, issued by the Department of Defense through the Defense Logistics Agency, with a total quantity of 178 units to be delivered within 97 days FOB origin. The item is identified by NSN 5965-01-479-5620 and is associated with part numbers 79L0234-00 from Lockheed Martin Corp and H-320/U from Roanwell LLC. The contract mandates strict adherence to technical and quality requirements referenced from the DLA Master List, and mandates sampling in accordance with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance criteria unless otherwise specified. All attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The contract prohibits the intentional use of mercury or mercury-containing compounds in any hardware or supplies, with exceptions limited to functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, and specific chemical reagents as authorized by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, using preservation method 41, and marking must follow MIL-STD-129 with no special codes. Hazardous material handling requirements prohibit mercury in preservation, packaging, and marking processes. The contract is a total small business set-aside under NAICS code 334310, with delivery, inspection, and acceptance all occurring at destination, and no quantity variance permitted. The point of contact for inquiries is Bryan Fair, reachable via email or phone provided.

General Info

178 headset-microphone units ordered under DLA contract, FOB origin, zero-defect acceptance, no mercury, small business set-aside.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M1-26-U-4735 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEADSET-MICROPHONE
HEADSET-MICROPHONE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
LOCKHEED MARTIN CORP 90536 P/N 79L0234-00
ROANWELL, LLC 82872 P/N H-320/U
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-U-4735
SECTION B
PR: 1000237809 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237809 0001 EA 178.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5965014795620
DELIVERY (IN DAYS):0097
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.

SPE7M1-26-U-4735 NSN/Part Number: 5965-01-479-5620 Quantity: 178 EA Purchase Request: 1000237809QTY: 178 Delivery: 97 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334310
New
SLED
MRI-Compatible Entertainment System SupplyThe contract entails the supply of MRI-safe digital video and audio entertainment systems designed for use within magnetic resonance imaging environments, utilizing fiber-optic transmission technology to eliminate electromagnetic interference that could disrupt imaging equipment or compromise patient safety. The systems must meet stringent compatibility standards to ensure they operate reliably in high-field magnetic environments without affecting image quality or device functionality. The performance location is tied to the University of Mississippi Medical Center, with the vendor expected to deliver fully compliant units that integrate seamlessly into clinical workflows and adhere to all regulatory and safety requirements specific to healthcare settings. This is a subcontract issued by the University of Mississippi Medical Center, with a solicitation posted on July 22, 2026, and responses required by August 5, 2026. The North American Industry Classification System code 334310 indicates the focus is on manufacturing communications equipment, aligning with the specialized nature of the entertainment systems being procured. There is no set-aside designation specified, and the contract does not list a point of contact or detailed office address, suggesting the procurement is managed internally by the medical center’s procurement or engineering division. The bid details are accessible via a state government portal, indicating adherence to public procurement guidelines and transparency in the bidding process.
UNIV of MS MEDICAL CENTER

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334310
New
DIBBS
Military-Specification Electrical Switch ManufacturingThe contract calls for the manufacture and delivery of four units of a PUSH SWITCH that must fully comply with established military specifications, including rigorous standards for packaging, preservation, and labeling as defined by MIL-STD-28786, MIL-STD-2073-1E, and MIL-STD-129. Each unit must meet exacting defense quality criteria to ensure operational reliability under harsh environmental and mechanical conditions. The products are subject to strict documentation and traceability requirements throughout the production and delivery process, with all labeling and packaging conforming to federal military standards to support logistics and inventory management within the Department of Defense supply chain. This is a subcontract under the NAICS code 334310 for Electrical Equipment Manufacturing and is issued by the Electrical Devices Division of the Department of Defense. The solicitation was posted on July 22, 2026, with responses required by August 3, 2026, indicating a competitive procurement timeline for qualified manufacturers. The place of performance and point of contact details are not specified, but all work must align with the DoD’s logistical and compliance frameworks. The contract is accessible via the DIBBS system, and suppliers must be prepared to demonstrate capability in high-reliability electrical component production prior to award.
ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
Push Switch Supply and DeliveryThe contract requires the procurement and delivery of 15 units of a Push Switch identified by the National Stock Number 5930014739804, adhering strictly to applicable military specifications. Each unit must be properly packaged and labeled in compliance with defense standards, ensuring traceability and readiness for military use. The finished products are to be shipped to a designated U.S. military installation in Ankara, Turkey, with all logistics handled in accordance with defense transportation protocols. This is a subcontract issued under the NAICS code 334310, which pertains to the manufacturing of electrical equipment and components. The opportunity was posted on July 22, 2026, with a response deadline of August 3, 2026, and is managed by the Electrical Devices Division of the Department of Defense. While specific point of contact and address details are not provided, the place of performance and end destination are clearly established within the U.S. military infrastructure in Ankara. Interested parties must submit proposals before the deadline to meet the operational requirements of the requesting agency.
ELECTRICAL DEVICES DIV

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
Barcoding and IUID ComplianceThe contract requires the application of 2D Data Matrix barcodes to achieve Item Unique Identification (IUID) in full compliance with MIL-STD-129 and the implied requirements of MIL-STD-130, ensuring all items are uniquely marked for seamless scannability and end-to-end traceability throughout the Department of Defense supply chain. This includes precise formatting, data content, barcode quality, and placement standards to guarantee automated reading efficiency in military logistics environments. All submissions must meet rigorous DoD specifications for durability, contrast, and data integrity to support inventory management, maintenance tracking, and asset accountability across operational and storage locations. The contract is classified as a subcontract under NAICS code 334310 and is issued by the DDSP NEW CUMBERLAND FACILITY, a unit of the Department of Defense, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with no set-aside provisions specified. Interested parties must ensure full technical compliance with DoD labeling standards and be prepared to demonstrate adherence to the required barcode specifications, as non-compliance will result in rejection. The official solicitation can be accessed via the provided DIBBS link for detailed submission guidelines and technical reference materials.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
HEADSET, ELECTRICALThe contract is for the procurement of 54 units of an electrical headset with NSN/Part Number 5965-01-628-7205 under Purchase Request 1000237933, with a delivery requirement of 95 days after delivery order. The solicitation, identified as SPE7M1-26-U-4755, was posted on July 22, 2026, and responses are due by August 6, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract falls under NAICS code 334310 and is managed by the Department of Defense’s Maritime Supply Chain. The primary point of contact is Bryan Fair, reachable via email and phone. The alternate offeror must submit a complete data package including documentation for both the approved and alternate parts. Government identification must be removed from non-accepted supplies, and compliance with DLA packaging requirements is mandatory. The contract is issued under a federal procurement vehicle with no set-aside designation.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
HANDSETThe contract pertains to the procurement of 61 handsets with NSN 5965-01-690-5440 under solicitation number SPE7M1-26-U-4822, issued by the Department of Defense’s Maritime Supply Chain. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. The alternate offeror is required to submit a complete data package encompassing both the primary and alternate part information. Delivery is mandated within 136 days after order, with a response deadline of August 6, 2026, and the solicitation was posted on July 22, 2026. The NAICS code is 334310, and the primary point of contact is Bryan Fair, reachable via email and phone provided. All information must be submitted through the DIBBS system using the provided link, and no set-aside designation is specified.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
ADAPTER, HEADSET-MICThe contract is for the procurement of 105 units of ADAPTER, HEADSET-MIC with NSN 5965-14-559-2147 under solicitation number SPE7M5-26-Q-0751, issued by the Department of Defense’s Active Devices Division. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, where revisions in effect on the solicitation issue date or award date apply depending on the acquisition size, with amendments overriding earlier versions if incorporated. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The alternate offeror is required to submit a complete data package including specifications for both the approved and alternate parts. Delivery is due within 392 days after order, with performance located in Tracy, California, 95304-5000. The solicitation was posted on July 22, 2026, with responses due by July 31, 2026, and the NAICS code is 334310 for communication equipment manufacturing. Primary point of contact is Chance Nicklaus, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334310
New
DIBBS
HEADSET-MICROPHONEThe contract specifies the procurement of 475 units of a commercial off-the-shelf headset-microphone item with part number BDN6730A manufactured by Motorola Solutions, Inc., identified by NSN 5965-01-582-5598. The item is to be delivered FOB origin within 90 days under solicitation SPE7M1-26-U-4704 with no variance allowed in quantity. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes and palletization standards outlined in DLA’s packaging requirements. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in or on the hardware, except for permitted exceptions such as batteries, fluorescent lights, or instrument components specified by NAVSEA, and any such components must be shockproof with secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and the unit of issue is EA at a unit price of $475, totaling $225,625. The item falls under NAICS code 334310 and is managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
HEADSET, ELECTRICALThis contract specifies the procurement of an electrical headset with NSN 5965-22-628-2024 and part number 839120-002 manufactured by TERMA A/S, under solicitation SPE7M1-26-U-4829. The item is classified as a critical application item and is covered under DLA Direct, CONUS, with a required delivery within 83 days FOB origin. The quantity is set at 181 units, with no tolerance for variance—both plus and minus zero percent—and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master requirements, prioritizing applicable technical and quality standards referenced by R or I numbers from the DLA Master List, and conforming to MIL-STD-129 for marking and labeling. Non-hazardous items must be commercially packaged per ASTM D3951 unless superseded by higher-priority DLA requirements, while hazardous items must follow TQ requirement IP025. Palletization must adhere to RP001, and all packaging must include the specified Unit of Issue and Quantity per Unit Pack. The contract does not guarantee purchase of the estimated quantity and is subject to DLA procurement policies. The point of contact is Bryan Fair, with solicitation opening on July 22, 2026, and responses due by August 6, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
HEADSET-MICROPHONEThis contract pertains to the procurement of headset-microphone units, specifically commercial off-the-shelf items manufactured by David Clark Company Incorporated with part numbers 40411G-06 and H10-13X, identified by NSN 5965-01-447-6274. The requirement is for 75 units delivered FOB origin with a 98-day delivery window, under solicitation SPE7M1-26-U-4642, and is subject to strict compliance with DLA packaging and technical requirements, including MIL-STD-129 for labeling and packaging, and ASTM D3951 for commercial packaging unless hazardous under FED-STD-313, in which case TQ requirement IP025 applies. All DLA Master List of Technical and Quality Requirements take precedence over general standards, and the units must be palletized in accordance with RP001. The contract specifies zero variance in quantity and mandates inspection and acceptance at the destination. The unit price is $75 per unit, with a total estimated value of $5,625, though the quantity is not guaranteed for purchase by the IDC. The contract falls under DLA Direct, CONUS coverage and uses the authorized DoD unit of issue, with packaging and labeling requirements aligned to defined QUP and U/I specifications. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain under NAICS code 334310. Primary point of contact is Bryan Fair, reachable at the provided phone and email. Compliance with all referenced DLA technical and quality standards is mandatory, and any revisions to the DLA Master List effective on the solicitation issue date govern unless an amendment updates the requirements.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
HEADSET-MICROPHONEThis contract pertains to the procurement of 106 units of the David Clark Company H10-36 headset-microphone, identified by NSN 5965-01-446-1506, under solicitation SPE7M1-26-U-4694. The item is classified as a commercial off-the-shelf product and must be delivered within 46 days FOB origin with no tolerance for quantity variance—precisely 106 units are required. Delivery is to be made to the destination point where inspection and acceptance will occur, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing those standards over ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and palletization requirements per RP001, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The unit of issue is each (EA), with a unit price of $106.00, totaling $11,236.00, and the solicitation is a total small business set-aside under NAICS code 334310. The contract is managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the primary point of contact, and responses are due by August 6, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334310
New
DIBBS
CEP KITThe contract for the CEP KIT under solicitation SPE7M1-26-U-4774 is a total small business set-aside designated for NAICS code 334310, managed by the Department of Defense through the Maritime Supply Chain organization. It requires the delivery of 188,000 units of NSN 5965-01-536-5644 with a strict delivery timeline of 84 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Offerors are obligated to submit a complete data package covering both the approved and alternate parts, with no data currently available to reference. The solicitation closes on August 6, 2026, and all responses must be submitted via the DIBBS platform. Primary point of contact is Bryan Fair, reachable at 614-693-0125 or bryan.fair@dla.mil.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 484220
New
DIBBS
Transportation and Logistics Services (Sea/Freight)The contract seeks a qualified contractor to manage the domestic freight and potential ocean transportation of pulse transformers from the contractor’s facility to military destinations designated by the Defense Logistics Agency, operating under FOB Origin terms which place responsibility for shipping and associated costs on the buyer once the goods leave the contractor’s premises. The scope encompasses end-to-end logistics coordination, including scheduling, documentation, and delivery tracking to ensure timely and secure movement of sensitive components to U.S. military locations, with compliance to all applicable defense transportation regulations. This is a small business set-aside subcontract under NAICS code 484220 for truck transportation and related services, awarded by the Maritime Supply Chain organization within the Department of Defense. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is open exclusively to small businesses as defined by the Small Business Administration. Contract performance is expected to originate from the contractor’s facility and terminate at various U.S. military sites, with all logistics executed in alignment with federal procurement standards and defense supply chain protocols.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance ServicesThe contract requires the provision of inspection and quality assurance services for pulse transformers, ensuring adherence to military-grade quality standards through in-process and final inspections conducted in accordance with MIL-STD-1916 or ASQ H1331 sampling methodologies. The work is essential to verify compliance with stringent military specifications, and the contractor must demonstrate expertise in applying these standardized inspection techniques to ensure product reliability and mission readiness. This is a subcontract opportunity set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, as defined by FAR 19.5, with a NAICS code of 541330 for scientific and technical consulting services. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026. The contracting agency is the Department of Defense through the Maritime Supply Chain office, and performance is expected to align with defense supply chain requirements, though specific location details are not provided. All work must meet the quality expectations of military applications without deviation from the referenced standards.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Packaging ServicesThe contract seeks specialized subcontracted services to ensure full regulatory compliance for hazardous materials handling, with a focus on Safety Data Sheet preparation, military-compliant packaging, and labeling adhering to MIL-STD-129 and OSHA standards. The work requires precise alignment with federal safety and transportation regulations to support defense supply chain operations, ensuring all hazardous materials are documented, packaged, and marked in accordance with strict military and occupational safety protocols. The subcontractor must demonstrate expertise in both environmental compliance and defense logistics to meet the stringent requirements of the Department of Defense. This opportunity is designated as a Total Small Business Set-Aside under the NAICS code 541690, reserved exclusively for small business entities and administered by the Maritime Supply Chain division of the Department of Defense. Proposals must be submitted by August 6, 2026, following the July 22, 2026 posting date, with performance likely centered on defense-related logistics centers, though specific locations are not detailed. The subcontractor will be expected to deliver consistent, auditable compliance outcomes critical to safe and lawful hazardous material movement within military supply networks.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
Pulse Transformer Manufacturing and SupplyThe contract calls for the manufacture and delivery of two pulse transformers identified by NSN 5950-01-188-6167, all of which must fully comply with applicable military specifications. This includes strict adherence to packaging, labeling, and hazardous materials handling standards to ensure safe transportation and operational readiness. The work is being procured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 335311 specifying the industry as Electric Power, Communication, and Other Electrical Equipment Manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the acquiring agency is the Department of Defense through the Maritime Supply Chain organization. The place of performance and specific point of contact are not detailed in the available information, but the procurement is accessible via the DIBBS system.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
Manufacture and Supply of DUMMY CONNECTOR, PLUG (NSN: 5935-00-911-7195)The contract calls for the manufacture and supply of 219 estimated units per year of a DUMMY CONNECTOR, PLUG identified by NSN 5935-00-911-7195 and drawing number 1555424 REV W, under an IDIQ agreement with a total ceiling value of $350,000. The minimum cumulative order requirement is 32 units, ensuring a baseline level of production regardless of full annual demand. The work falls under NAICS code 334220, indicating electronics manufacturing, and is classified as a subcontract within the Department of Defense's Maritime Supply Chain framework. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, for interested parties to submit proposals. Performance location and point of contact details are not specified, but the contract will be managed through the DLA BSM system via the provided UIR link.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
Supplier of Electronic Shielding Gaskets (NSN: 5999011901395)The contract calls for the manufacture or supply of electronic shielding gaskets identified by NSN 5999011901395, adhering strictly to military specifications for performance and quality. The contractor is required to package and label all items in full compliance with MIL-STD-129, ensuring proper identification and traceability for government receipt. Hazardous materials handling and documentation must meet all applicable federal and DoD regulations. Deliveries must be made to designated U.S. government locations, with no flexibility in destination or timing. All receiving reports must be submitted through the Web-Based Integrated System for Logistics (WAWF), and invoices must be processed electronically in alignment with federal procurement systems. Failure to comply with these requirements may result in rejection of delivery or nonpayment. The contract is issued as a subcontract under the Department of Defense’s Maritime Supply Chain, with a NAICS code of 335999 indicating classification under Other Miscellaneous Electrical Equipment and Component Manufacturing. The solicitation opened on July 22, 2026, with responses due by August 6, 2026. There is no specified set-aside designation or small business preference outlined. The place of performance and office address are not detailed, but all work must support government logistics and delivery obligations. Access to the full solicitation is available via the DIBBS portal, and contractors must ensure all technical, administrative, and compliance documentation is accurate and complete before submission.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 488510
New
DIBBS
FOB Origin Logistics and Shipment CoordinationThe contract pertains to the coordination of freight shipments originating under FOB terms, requiring comprehensive management of logistics for Department of Defense locations. This includes end-to-end oversight of documentation, selection and oversight of carriers, and real-time tracking of deliveries to multiple destinations, ensuring compliance with military supply chain standards. The work involves meticulous planning and execution to meet stringent DoD requirements for delivery accuracy, timing, and recordkeeping across diverse and often remote locations. Subcontracting under NAICS code 488510, this effort is managed by the Maritime Supply Chain division of the Department of Defense, with responses due by August 6, 2026. The scope demands expertise in international and domestic freight logistics, with an emphasis on seamless handoffs between carriers and visibility into shipment status from origin to final military destination. Contractors must demonstrate proven capability in handling sensitive military shipments, maintaining secure and timely communication channels, and adapting to dynamic delivery schedules without disruption to operational readiness.
Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PalletizationThe contract requires the packaging, preservation, and palletization of circuit breakers to meet stringent military standards including MIL-STD-129 and RP001, ensuring full compliance with Department of Defense logistics protocols administered by the Maritime Supply Chain under the DLA. All work must align with military specifications for identification, labeling, protective packaging, and unit load configuration to facilitate efficient handling, storage, and transportation within the defense supply chain. The requirement is issued as a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services tailored to defense needs. Responses are due by August 6, 2026, with the solicitation posted on July 22, 2026, through the DIBBS platform. The place of performance and specific agency location details are not provided, but performance is expected to support DLA's broader logistics infrastructure. The subcontractor must demonstrate capability to execute precision packaging under defense-grade standards, including durable preservation techniques to protect sensitive electrical components from environmental degradation during extended storage and transit. Compliance, documentation accuracy, and adherence to military labeling requirements are critical to contract success.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract requires specialized packaging and labeling of circuit breakers that contain hazardous materials, ensuring full compliance with OSHA and DFARS regulations. All packaging must include accurate Safety Data Sheets and properly formatted hazard warning labels to meet federal safety and documentation standards. The work is structured as a subcontract under the NAICS code 561990, indicating it falls under other support services, and is issued by the Department of Defense through its Maritime Supply Chain division. Performance of the contracted services is expected to align with defense supply chain requirements, though the specific place of performance is not designated. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, leaving a two-week window for interested parties to submit proposals. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of business size or status. The opportunity is accessible through the DIBBS platform, and while no point of contact is listed, all queries must be directed through the official system. The successful bidder will be responsible for the end-to-end handling of hazardous material packaging, ensuring that each circuit breaker unit is properly identified, documented, and shipped in accordance with all applicable military and occupational safety mandates.
All Other Support Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335313
New
DIBBS
Circuit Breaker Manufacturing and SupplyThe contract seeks the manufacture or sourcing of circuit breakers that meet stringent military and federal technical standards, with full compliance required to the DLA Master List and critical application specifications. These components must be engineered for reliability in demanding defense environments, ensuring operational integrity in high-stakes systems. The solicitation is issued as a subcontract under NAICS code 335313, indicating a focus on electrical equipment manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain organization. Responses are due by August 6, 2026, with the opportunity posted on July 22, 2026, providing a limited time window for qualified suppliers to submit proposals. While no specific set-aside preferences or geographic restrictions are outlined, the place of performance remains undefined, suggesting flexibility in logistics as long as compliance and delivery requirements are met. All bidders must demonstrate proven experience with defense-grade electrical components and the capacity to meet exacting quality and documentation standards tied to federal procurement protocols.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting Support (Administrative)The contract seeks administrative support services focused on ensuring small business compliance within the Maritime Supply Chain division of the Department of Defense, specifically for a Total Small Business Set-Aside under FAR 19.5. The work involves managing socioeconomic status reporting and facilitating joint venture disclosures through SAM.gov, requiring accurate and timely documentation to maintain eligibility and compliance for small business contracting opportunities. The effort is classified under NAICS code 541611, indicating services related to management consulting, with a specific emphasis on regulatory adherence and subcontracting transparency. Responses are due by August 6, 2026, and the solicitation is open to small businesses qualifying under the SBA's set-aside criteria, with no specific place of performance or point of contact listed. The contract is administratively oriented, emphasizing data integrity, reporting accuracy, and adherence to federal small business regulations rather than operational or technical deliverables. Interested parties must access the full solicitation details via the provided DIBBS link, as additional requirements may be specified in supporting documentation not included in the public summary.
Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541940
New
DIBBS
Barcoding and Marking ServicesAll packaging and components must be marked and barcoded in strict compliance with MIL-STD-129 specifications, ensuring uniformity and traceability across the supply chain. If required, Unique Item Identifiers must be applied in accordance with DoD guidelines to support full asset visibility and system integration. The work must be fully compatible with the WAWF system to enable seamless electronic data exchange and logistics tracking. This subcontract is a total small business set-aside under FAR 19.5, designated for small business concerns, and falls under NAICS code 541940. The opportunity was posted on July 22, 2026, with proposals due by August 6, 2026, and is managed by the Maritime Supply Chain division within the Department of Defense.
Veterinary Services

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details