Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HEAT SINK, ELECTRICA

Active
SPE7M5-26-T-112ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-112Z, is for the procurement of one electrical heat sink, identified by NSN 5999-01-727-3297. The contract requires delivery within 20 days after the order is received, with performance located in Port Hueneme, California. The agreement is subject to several DLA technical and quality requirements, including specific packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Additionally, the use of Class I ozone-depleting substances during design, manufacturing, or testing is strictly prohibited without written approval from the contracting officer, unless the item is classified as a commercial or part-numbered only product.

General Info

DoD procurement of one electrical heat sink for delivery to Port Hueneme, California.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

1150 STETHEM ROAD, PORT HUENEME, CA, 93043, USA

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-112Z Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Margaret Smith
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEAT SINK,ELECTRICA
HEAT SINK, ELECTRICAL-ELECTRONIC COMPONENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
ADEQUATE DATA FOR THE NSN/Part Number: 5999-01-727-3297 Quantity: 1 EA Purchase Request: 7015997134QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6328
This contract, identified as SPE7M8-26-T-6328, is a solicitation from the Department of Defense Electrical Devices Division for the procurement of one rotary switch, part number 8604636 by Draeger Inc. The item is identified by NSN 5930-01-547-5526 and must comply with military specification MIL-DTL-28786. Delivery is required within 20 days, with a final required delivery date of August 25, 2026, shipped FOB destination to the USS Anchorage LPD 23. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipping must be handled via the fastest traceable means, avoiding parcel post, and must follow hazardous materials packaging and shipping guidelines as outlined in IP025.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
GUARD, SWITCH
Solicitation # SPE7M8-26-T-6322
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of 144 units of switch guards under part number 5930-00-776-6916. The contract requires delivery within 160 days after receipt of order, with the place of performance located in Tracy, California. A critical requirement of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR and EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires. All technical data must be handled in accordance with DFARS 252.225-7048 to prevent unauthorized disclosure to foreign persons.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-T-24DG
This contract is for the procurement of 10 electrical leads, identified by NSN 6150-01-007-9784 and Fluke Electronics Corp part number 1440-48-0. The solicitation, numbered SPE4A6-26-T-24DG, is issued by the Department of Defense ASC Commodities Division with a required delivery date of August 13, 2026, and a delivery timeframe of 20 days after receipt of order. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination, specifically Little Rock AFB in Arkansas. The agreement mandates strict adherence to DLA packaging and marking requirements, including ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-6335
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6335, is for the procurement of 12 push switches identified by NSN/Part Number 5930-01-304-6671. The contract requires delivery within 121 days after receipt of order, with performance located in Tracy, California. The agreement incorporates several critical regulatory and technical requirements, including DLA packaging standards, the handling of covered defense information, and the removal of government identification from non-accepted supplies. Offerors must adhere to the DLA Master List of Technical and Quality Requirements and are required to provide a complete data package for both approved and alternate parts. Responses are due by September 8, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-23YA
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of one electrical power cable assembly, identified by NSN 6150-01-367-5604. The contract requires delivery within 20 days after receipt of order and adheres to DLA packaging requirements. The technical data associated with this item is subject to strict export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires.
ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, ROTARY
Solicitation # SPE7M8-26-T-6330
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6330, is for the procurement of two rotary switches identified by NSN 5930-01-366-6817. The contract requires delivery within 112 days after the order is placed and specifies performance in New Cumberland, Pennsylvania. The agreement incorporates specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to submit a complete data package for both approved and alternate parts.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLE
Solicitation # SPE7M8-26-T-6321
This contract, identified as SPE7M8-26-T-6321, is a solicitation for the procurement of one toggle switch, identified by NSN 5930010870317. The requirement specifies parts from Honeywell International Inc (P/N 13AT9-T2) or CAE USA Inc (P/N S251-1). The order is a total small business set-aside under NAICS code 334419, with delivery required within 20 days after receipt of order. The shipment is destined for the Commanding Officer of Fighter Squadron Composite VFC 111 in Key West, Florida, with FOB Origin terms. Packaging must adhere to DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials. The contract mandates the removal of government identification from non-accepted supplies and requires shipping via the fastest traceable means, explicitly prohibiting the use of parcel post.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
INSTALL ASSEMBLY
Solicitation # SPE4A5-26-T-394T
This contract is for the procurement of one Install Assembly, identified by NSN 4920-01-661-7279 and part number 4026AS311-7. The item is classified as a critical application item and must be manufactured according to Technical Data Package Revision A, General 1, based on drawing 30003 4026AS311. Delivery is required within five days after the order, with a required delivery date of August 24, 2026. The shipment is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The agreement incorporates several DLA master list requirements, including specific standards for packaging, measuring and test equipment, and cybersecurity maturity model certification level 2 self-assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The final destination for the shipment is MCAS Futenma in Okinawa, Japan.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-6331
This contract is for the procurement of 12 sensitive switches, identified by NSN 5930014358290 and part number JMP-500 from Columbus Electric Mfg Co. The items are designated as critical application items and must adhere to technical data package Revision A and reference drawing 11476004 Revision B. The order is managed under solicitation SPE7M8-26-T-6331 with a required delivery date of March 27, 2026, and a delivery timeframe of five days after order. The agreement specifies that inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-28786, with specific requirements for the removal of government identification from non-accepted supplies. The shipment is destined for the Royal Saudi Air Defense Forces in Jeddah, Saudi Arabia, via New York Forwarding Service Inc.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M8-26-T-6326
This solicitation, issued by the Department of Defense Electrical Devices Division, is for the procurement of two switch assemblies under NSN 5930-00-548-7423. The contract requires delivery within five days after receipt of order and adheres to specific DLA packaging and quality requirements. The response deadline for this solicitation is September 8, 2026. The contract strictly prohibits the use of Class I ozone-depleting substances during the design, manufacturing, or testing processes unless written approval is granted by the contracting officer. Additionally, any alternate offerors must provide a complete data package for both approved and alternate parts. All technical and quality requirements are governed by the DLA Master List based on the solicitation or award date.
ELECTRICAL DEVICES DIV

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A0-26-T-4511
This contract is for the procurement of one wiring harness, identified by NSN 5995015778569 and HDT Expeditionary Systems Inc part number 178K0102-1. The order is managed under solicitation number SPE4A0-26-T-4511 for the Department of Defense Aviation Supply Chain. Delivery is required within five days after the order is placed, with the shipment designated as FOB Origin and the final destination located at Prince Sultan Air Base in Saudi Arabia. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements specified in RP001. Inspection and acceptance will take place at the destination. The contract also incorporates specific technical and quality requirements via the DLA master list and mandates the removal of government identification from any non-accepted supplies.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L4-26-T-6629
This solicitation, issued by the Department of Defense under the LSO Combat Vehicles and Armament agency, is for the procurement of 11 wiring harnesses, identified by NSN/Part Number 6150-01-422-7736. The contract requires delivery within 251 days after receipt of the order. Performance is centered in Anniston, Alabama, and the solicitation is categorized under NAICS code 334419. The contract mandates strict adherence to several regulatory and quality standards, including CMMC Level 2 certification and DLA packaging requirements. It emphasizes rigorous quality control through configuration change management and the use of Qualified Products Lists or Qualified Manufacturers Lists. Additionally, the project is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed training to handle sensitive technical data.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-449V
This contract is for the procurement of six electrical plug connectors, identified by NSN 5935014601304 and part number D38999/26JH21PN. The items are classified as critical application items and must adhere to the Qualified Products List for connector assemblies and electrical contacts, specifically following MIL-DTL-38999N and MIL-DTL-38999/26G specifications. Delivery is required within 20 days of order, with the final destination being the Naval Air Warfare Center Air Division in Patuxent River, Maryland. The contractor must comply with DLA packaging requirements, including MIL-STD-129 for marking and labeling, and ensure that all technical and quality requirements from the DLA Master List are met. Shipping must be handled via the fastest traceable means, and parcel post is strictly prohibited.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M5-26-T-449N
This contract is for the procurement of 20 units of unprogrammed one-time programmable digital microcircuits under NSN 5962-01-318-3782. The acquisition is governed by Federal Supply Class 5962 and requires the supplier to be on the Qualified Suppliers List of Distributors or Qualified Testing Suppliers List. Delivery is specified as 160 days after order, with a required delivery date of June 3, 2027, shipping FOB Origin to DLA Distribution DDWO in Columbus, Ohio. Strict compliance is required regarding supply chain traceability and quality assurance. Contractors must submit DLA Land and Maritime Form 918 and all supporting traceability or test documentation via email at least 15 days before the delivery date and must receive written authorization from the contract administrator before shipping. Additionally, the items must meet rigorous packaging standards, including MIL-PRF-81705 for ESD and EMI protection, and adhere to IPC/JEDEC J-STD-609 for lead finish marking. Failure to provide correct documentation or ship without authorization may result in the government withholding payment.
Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, BULKHEAD,
Solicitation # SPE7M5-26-T-449M
This solicitation from the Department of Defense Active Devices Division is for the procurement of six electrical bulkhead connectors under NSN 5935-01-693-9269. The contract is designated as a Total Small Business Set-Aside under NAICS code 334417, with a required delivery timeframe of 160 days after the order date. Performance is centered in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and cybersecurity standards, specifically requiring CMMC Level 2 certification and compliance with Covered Defense Information regulations. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additional requirements include specific physical item marking and the removal of government identification from non-accepted supplies.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-388Z
This contract is for the procurement of 14 electromagnetic relays under solicitation number SPE7M5-26-T-388Z for the Department of Defense. The items must adhere to specific technical standards, including MIL-PRF-6106/39G and MIL-PRF-6106R, and are designated as critical application items. Delivery is required within 168 days, with a required delivery date of February 3, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contractor must comply with DLA packaging requirements and MIL-STD-129 marking standards. Specifically, the items require unit package marking for component lead finish in accordance with IPC/JEDEC J-STD-609 to identify lead or lead-free attributes. Inspection and acceptance will take place at the destination, and the contract allows for zero quantity variance.
Relay and Industrial Control Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M5-26-T-449Q
This contract is for the procurement of 448 electrical contacts, identified by NSN 5999010236992 and Amphenol Canada Corp part number 482-92. The solicitation, numbered SPE7M5-26-T-449Q, is issued by the Department of Defense Active Devices Division and is designated as a Total Small Business Set-Aside. Delivery is required within 107 days, with a need ship date of September 7, 2026, and an original required delivery date of March 2, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific instructions for hazardous and non-hazardous materials. It prohibits the use of Class I ozone-depleting substances in manufacturing or testing without written approval from the contracting officer. All items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific mandates for physical identification and the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0809
This solicitation is for the procurement of 514 connector adapters, identified by NSN 5935-01-443-9965, for the Department of Defense Active Devices Division. The contract is a total small business set-aside under NAICS code 334417, with a delivery requirement of 156 days after receipt of order. Performance is located in Anniston, Alabama, and the response deadline is September 11, 2026. The agreement mandates strict adherence to source-controlled drawings and DLA packaging and quality requirements. Key compliance standards include CMMC Level 2 certification for third-party assessment and rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334419
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M5-26-T-449P
This contract, identified as SPE7M5-26-T-449P, is for the procurement of three electrical grounding strips with the National Stock Number 5999-01-735-7581 and part number 12045-4418-A12 from L3Harris Technologies, Inc. The order is managed by the Department of Defense under the Active Devices Division, with a required delivery date of April 29, 2027, and a delivery timeline of 232 days after the order. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Shipping and palletization must adhere to MIL-STD-129 and DLA packaging requirements, with the final destination being DLA Distribution San Joaquin in Tracy, California. Technical and quality standards are governed by the DLA Master List, specifically including requirements for the removal of government identification from non-accepted supplies and physical item marking.
Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334310
New
DIBBS
CUSHION, EAR
Solicitation # SPE7M5-26-T-449Z
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of ear cushions under NSN 5965-01-554-2388. The contract requires a total quantity of 40 packages, with each package containing two units. Delivery is mandated within 20 days after receipt of the order, and the place of performance is located in Minneapolis, Minnesota. The agreement incorporates specific DLA packaging requirements and mandates the removal of government identification from any non-accepted supplies. It also adheres to covered defense information standards and technical quality requirements as outlined in the DLA Master List. Offerors providing alternate parts must submit a complete data package for approval. The solicitation was posted on August 27, 2026, with a response deadline of September 8, 2026.
Audio and Video Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, REC
Solicitation # SPE7M5-26-T-449H
This contract is for the procurement of one dummy connector, receiver, identified by NSN 5935011277631. The item is associated with Amphenol Corp part number 10-427405-133 and Lockheed Martin Corporation part number C3558-13. The delivery is required within 20 days, with a required delivery date of August 25, 2026, shipping FOB origin to Ellsworth AFB in South Dakota. The agreement mandates strict adherence to DLA packaging and quality requirements, specifically RP001, RA001, RQ011, and RQ017. Packaging must comply with MIL-STD-129 and ASTM D3951, with specific instructions for hazardous materials under TQ requirement IP025 if applicable. Inspection and acceptance will take place at the destination, and shipments must be sent via the fastest traceable means rather than parcel post.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-T-449Y
This contract is a solicitation for the procurement of five connector adapters, identified by NSN 5935-00-926-0702 and part number MS3119E14-12. The items must adhere to technical specifications MIL-DTL-26482J(2) and MS3119E(2), and are designated as qualified items under the Qualified Products List for connector assemblies and electrical contacts. The order is managed under purchase request 7017744244 with a required delivery date of March 5, 2026, and a delivery timeframe of 10 days after order. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination. The items are to be delivered to the 160th Aviation HQ HHC Special Operations at Fort Campbell, Kentucky. Packaging must comply with DLA requirements, specifically MIL-STD-129 and ASTM D3951 for non-hazardous materials, and must be shipped via the fastest traceable means. All technical and quality requirements are governed by the DLA Master List.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
COVER, ELECTRICAL CO
Solicitation # SPE7M5-26-T-449S
This contract is for the procurement of 20 electrical covers, identified by NSN 5935-01-688-5512 and Glenair part number 660-050XM25N. The items are designated as critical application items and require FAA airworthiness approval and strict adherence to supply chain traceability documentation. Delivery is required within 55 days, with a required delivery date of June 13, 2026, and shipment to DLA Distribution San Joaquin in Tracy, California. The agreement mandates rigorous quality and packaging standards, including compliance with MIL-STD-129 for marking and MIL-DTL-55330 for connector preservation. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with zero-defect acceptance for sample lots. The contractor is responsible for maintaining configuration change management and adhering to DLA packaging requirements for procurement to ensure the integrity of the supplied components.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M5-26-T-449R
This contract is for the procurement of 10 electrical receptacle connectors, identified by NSN 5935014783932 and part number MS3402D24-2SW. The items are classified as critical application items and must adhere to Qualified Products List requirements for connector assemblies and electrical contacts. Technical specifications are governed by SAE AS34021 and SAE AS50151 standards. The delivery is required within 84 days of order, with a need date of December 2, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance is required for DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Additionally, the contract mandates strict prohibitions against the intentional addition of mercury or mercury-containing compounds in the hardware.
Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details