This Government Contract opportunity from Department Of Defense was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Heat Treating and Material Processing (SIP)

Closed

Federal

Submission Closed08/28/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332813

New

Federal

Heat Treatment of Cannon Hardware

POSTED

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract for Industrial Coating and Surface Treatment is issued by the Department of Defense under the Navsup Weapon Systems Support Mech agency. The contractor is responsible for performing specialized surface treatments, plating, and coatings for prime contractors on naval component projects. Specifically, the scope of work involves applying protective finishes to the SHOE SET, COUNTER CL in accordance with technical drawings to ensure essential corrosion resistance. The execution of these services requires the use of industrial plating tanks, chemical baths, or powder coating equipment. All work must strictly comply with NAVSUP quality and environmental standards to ensure components are delivered ready for final assembly. The solicitation was posted on October 27, 2026, with a response deadline of November 2, 2026, falling under NAICS code 332813.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aerospace Component Finishing and Surface TreatmentThis subcontract involves providing specialized surface treatments and aerospace-grade coatings for F118 front frames made of 17-4PH stainless steel. The work supports prime contractors on Air Force engine projects based at Tinker AFB, focusing on preventing corrosion and enhancing the durability of components operating in harsh engine environments. The project is managed under the Department of Defense and requires the service provider to hold NADCAP or equivalent aerospace finishing certifications to ensure strict quality standards. Interested parties must respond by November 10, 2026, for this effort categorized under NAICS code 332813.

POSTED

DEADLINE

Specialized Surface Coating & PlatingThis subcontract for Specialized Surface Coating and Plating supports prime contractors on projects for the Puget Sound Naval Shipyard and Intermediate Maintenance Facility in Bremerton. The scope of work focuses on surface restoration and plating services for cylinder rods and components, specifically utilizing hard chrome plating, flame spraying, and weld cladding to restore fit and finish. The contractor is required to use specialized chrome plating tanks and flame spraying equipment to ensure all deliverables meet zero defect standards per PRS #4. This Department of Defense effort falls under NAICS code 332813 and involves the delivery of fully plated and surface-treated cylinder components.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Proprietary Dicronite Dry Film Lubrication Application

W6QK Ccad Contr Office

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis subcontract involves the application of specialized Chemical Agent Resistant Coatings (CARC) for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider must utilize CARC-certified spray booths to apply coatings in strict accordance with DCSC drawing 16236 CS-2300-0001 and military specifications. A critical requirement of the project is total compliance with environmental regulations, specifically the prohibition of Class I ozone-depleting chemicals. The scope of work culminates in the delivery of one finished mounting plate accompanied by all necessary compliance documentation. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement categorized under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Anodic Finishing Services for Aluminum ComponentsThis subcontract, titled Anodic Finishing Services for Aluminum Components, involves performing chemical anodic coating for prime contractors on DLA and US Navy projects. The scope of work requires applying anodic finishes to machined aluminum parts in strict accordance with mil-A-8625 using specialized chemical processing equipment and anodizing tanks. The contractor must ensure all hazardous material labeling complies with the Hazard Communication Standard 29 CFR 1910.1200 and deliver finished parts with verified coating thickness. The opportunity is a Total Small Business Set-Aside under NAICS code 332813, managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div. Performance will take place in Cherry Point, zip code 28533-5040. The solicitation was posted on October 25, 2026, with a response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Coating and Finishing for Hydraulic ManifoldsThis subcontract involves providing specialized coating and finishing services for hydraulic manifolds to support prime contractors under the DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work includes performing surface treatments such as anodizing, chemical filming, powder coating, and plating on machined manifold bodies. These processes are executed using industrial plating tanks and curing ovens to ensure all finished components strictly comply with MIL-DTL or MIL-PRF specifications for corrosion prevention. The project is managed under NAICS code 332813 for the Department of Defense, with performance taking place in New Cumberland. Interested parties must adhere to the response deadline of November 5, 2026. The primary objective is the delivery of high-quality, coated manifold bodies that meet rigorous military standards for durability and protection.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThis subcontract involves providing specialized paint and finishing services for the DLA Weapons Support Land Supply Chain. The scope of work requires the application of Chemical Agent Resistant Coatings and high-temperature coatings to eight structural supports, strictly adhering to DSCD Drawing 16236 CS-2300-0001. To ensure compliance and quality, the performing contractor must utilize CARC-certified spray booths and maintain rigorous environmental controls. The project is managed under NAICS code 332813 and will be performed at Fort Bragg, North Carolina. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating for Critical Steel ComponentsThis subcontract involves providing industrial cadmium plating services for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating to seven steel tube-to-boss tees to ensure necessary corrosion resistance. A critical compliance requirement for this project is the strict prohibition of class I ozone-depleting chemicals during the plating process. The project is categorized under NAICS code 332813 and will be performed in Tracy, California. Interested parties must adhere to the response deadline of November 5, 2026, to provide the seven finished components as specified in the contract requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Industrial Coating and FinishingThis subcontract for Industrial Coating and Finishing involves providing specialized surface treatment and powder coating services for prime contractors supporting DLA supply contracts. The scope of work includes degreasing, sandblasting, and the application of military-grade industrial coatings specifically designed to prevent corrosion on small arms storage racks. All work must be performed in strict accordance with DLA quality requirements RA001 to ensure proper finish thickness and adhesion. The project is managed under the Department of Defense through DLA DIST SAN JOAQUIN and will be executed in Tracy, California. Interested parties should note the response deadline of November 5, 2026, for this effort categorized under NAICS code 332813. The final deliverable consists of fully finished and coated storage racks meeting all specified military standards.

POSTED

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract for Industrial Coating and Surface Treatment involves providing specialized surface treatments, anodizing, or painting for machined manifold blocks. Working on behalf of prime contractors for the DLA Weapons Support Fluid Handling Division, the provider must apply corrosion-resistant coatings while ensuring precision-machined ports are masked to prevent buildup. The project requires the delivery of six surface-treated manifold blocks in New Cumberland. All work must strictly adhere to the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of Class I ozone-depleting chemicals. The opportunity is categorized under NAICS code 332813 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The Department of Defense, through DLA Aviation at Oklahoma City, is seeking a subcontractor for heat treating and material processing services. The scope of work involves performing solution heat treatment, aging, and stress relief processes specifically for compressor blade materials. A critical requirement for this contract is adherence to NADCAP AC7102 standards and the maintenance of full documentation traceability. Interested parties must respond by August 28, 2026, for this project categorized under NAICS code 332813.

General Info

DOD seeks NADCAP certified subcontractor for compressor blade heat treating and material processing.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

OK, USA

Set-Aside

NONE

Documents

This scope was carved out of FD20302700096.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BLADE,COMPRESSOR,AI_End_Item_F110_NSN_2840016950035PR _PN_2814M91P01

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 20

subcontract

Response DeadlineAug 28

Deadline has passed

Submission Closed

08/28/2026, 04:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressN/A

ContactsNo contact information available

Full Description

Perform solution heat treatment, aging, and stress relief processes on compressor blade materials with NADCAP (AC7102) and full documentation traceability.