Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Heat Treatment and Surface Finishing Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the heat treatment and surface finishing of machined machine keys to meet precise hardness and durability specifications required for military applications. Services include quenching and tempering processes to enhance material properties, along with surface finishing techniques to ensure dimensional stability and resistance to wear under operational stress. These tasks are critical to maintaining the functional integrity of components used in defense systems, and must be performed in accordance with stringent technical standards. Performed under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense, the work is classified under NAICS code 332813 for heat treating and coating activities. The solicitation was posted on July 14, 2026, with performance expected to occur somewhere within the United States, though specific location details are not provided. The contract is managed through the DIBBS system under award number SPE7M126P1557, and successful performance will support critical defense supply chain requirements for hardened mechanical components.

General Info

Heat treatment and surface finishing of military-grade machine keys per defense specifications under DLA subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M126P1557.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

KEY, MACHINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Quenching, tempering, and surface finishing of machined machine keys to achieve required hardness and durability per spec.

Similar Contracts

Same NAICS industry code

Green Final Finish CoatingThis subcontract opportunity is for the application of a green final finish coating on 429 brackets according to drawing 19207 12664366-2. The project supports the DLA Weapons Support Land Supply Chain and requires the use of industrial painting and coating facilities. A critical compliance requirement is the strict prohibition of Class I ozone-depleting chemicals during the coating process. The solicitation is designated as a Women-Owned Small Business set-aside under NAICS code 332813. Interested parties must submit their responses by November 12, 2026, to provide the finished brackets as specified by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments, plating, and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work specifically requires the application of aerospace-grade plating or passivation to Drag Brace Nuts in accordance with technical drawings for part number 204-011-144-003. The contractor must ensure strict compliance with FED-STD-313 standards and adhere to IP025 guidelines for the packaging of hazardous materials. Final deliverables include finished nuts with verified coating thickness, with performance taking place in New Cumberland. The response deadline for this opportunity is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Aerospace Heat Treatment and Surface CoatingThis subcontract for Aerospace Heat Treatment and Surface Coating involves providing specialized heat treatment and surface finishing services for gearbox components on DLA aircraft projects. The contractor is responsible for applying aerospace-grade coatings to ensure all components meet strict hardness and wear-resistance specifications while maintaining full compliance with the Hazard Communication Standard 29 CFR 1910.1200 regarding hazardous materials. Managed under the Department of Defense, the work will be performed at Hill AFB. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 332813 and focuses on the delivery of fully treated and coated gearbox components to prime contractors.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The scope of work involves performing specialized surface treatments and finishing for prime contractors, specifically focusing on the delivery of finished aircraft frame components. All work must be executed using chemical processing and anodizing equipment to ensure strict adherence to aerospace corrosion standards and Boeing Process Specifications, including BAC5300 and BAC5736. The project is designated under NAICS code 332813 and will be performed at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, for this requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support ASC by providing protective coatings, plating, and surface finishes for prime contractors. The scope of work involves surface preparation and application for part number 2840088008, specifically delivering surface-treated piston rods ready for final assembly. Contractors must utilize industrial plating tanks to verify coating thickness and surface roughness in strict accordance with the provided technical data package. The project is managed by the Department of Defense and will be performed at Hill AFB. To be eligible, providers must maintain NADCAP accreditation and CMMC Level 2 certification. Interested parties should note the response deadline of November 5, 2026, for this specialized aerospace finishing requirement under NAICS code 332813.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating involves providing specialized surface treatments, plating, and coatings for tube components supporting the DLA Weapons Support Fluid Handling Division. The contractor must apply finishes in strict accordance with Boeing TDP Rev B Gen 2 standards while ensuring that no Class I ozone-depleting chemicals are used during the process. All coating thickness must be verified to meet rigorous aerospace standards. To be eligible, the provider must maintain both NADCAP and ISO 9001:2015 certifications. The work is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Passivation and Corrosion Protection ServicesThis subcontract for Passivation and Corrosion Protection Services supports the DLA Weapons Support Land Supply Chain. The selected provider will perform chemical passivation and corrosion inhibition for prime contractors, specifically applying passivation treatments according to ASTM-A967 and preservative code 89 to all bare metal surfaces. Additionally, the scope includes lubricating all threads with corrosion-inhibiting compounds and delivering the finished metal components. The work is performed in Broken Arrow, Oklahoma, and requires strict adherence to hazardous material handling and chemical passivation bath protocols per 29 CFR 1910.1200(g). This opportunity falls under NAICS code 332813 and is managed by the Department of Defense. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the DLA Weapons Support ASC by providing specialized plating and coating services for crew door levers. The contractor is responsible for applying aerospace-approved finishes that adhere to MIL-STD specifications, specifically utilizing alternatives to hexavalent chromium to ensure components are ready for final assembly. To qualify, providers must maintain ISO 9001 or AS9100 certification and possess industrial plating systems. The work is performed at Hill AFB, and interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Heat Treatment and Surface Coating ServicesThis subcontract for Heat Treatment and Surface Coating Services supports prime contractors working on DLA Weapons Support Land Supply Chain projects for the Department of Defense. The scope of work involves performing thermal processing and surface finishing, specifically applying heat treatments and coatings to ensure components meet the hardness and wear specifications outlined in the Technical Data Package. These operations are carried out using industrial heat-treat furnaces and chemical plating baths. The contractor is responsible for the delivery of finished heat-treated and coated components and must strictly adhere to Class I Ozone Depleting Chemical prohibitions. This opportunity falls under NAICS code 332813, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Military-Grade Finishing and Coating for Stowage BoxThis subcontract involves providing military-grade surface treatment and coating services for stowage box components under DLA Weapons Support. The selected provider will be responsible for preparing surfaces and applying coatings according to the Technical Data Package for NSN 2540-01-620-2434, with a strict prohibition on the use of class I ozone-depleting chemicals. Performance will take place in Fort Hood, and the contractor must deliver finished, coated metal components. To qualify, the contractor must possess industrial coating booths and chemical pretreatment tanks. Additionally, the provider is required to maintain certification in either ISO 9001 or SAE AS9003 quality management standards. This opportunity is categorized under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

Aerospace-Grade Surface Treatment and FinishingThis subcontract for Aerospace-Grade Surface Treatment and Finishing involves providing specialized coating, plating, and surface treatment services for Hoisting Adapters on DLA supply contracts. The contractor is responsible for applying finishes according to Reference Drawing NR 78286 65720-70107 Revision F using industrial equipment that meets strict aerospace standards. To qualify, the provider must hold SAE AS9100 certification and typically requires NADCAP accreditation due to the critical safety nature of the items. The project is managed under the Department of Defense with a response deadline of November 6, 2026, and falls under NAICS code 332813.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

NADCAP Certified Black Oxide or Magnesium Phosphate CoatingThis subcontract opportunity with the DLA Weapons Support Land Supply Chain involves providing specialized chemical coating services for prime contractors. The scope of work requires the application of Black Oxide coating according to MIL-C-13924 or Magnesium Phosphate coating per MIL-DTL-16232, utilizing industrial chemical baths and curing equipment to ensure all delivered hardware meets these specific military standard finishes. A critical requirement for this contract is that the provider must hold PRI certification to the NADCAP standard. Interested parties should note that the response deadline is November 9, 2026, and the work falls under NAICS code 332813.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cafeteria & Food Truck Concession Services – Tracy, CA

Solicitation # NAFUA1-26-R-0003

The Defense Logistics Agency is soliciting proposals under solicitation NAFUA1-26-R-0003 for cafeteria and mobile food truck services at the Defense Distribution Depot San Joaquin in Tracy, California. This is a revenue-generating concessionaire contract where the contractor provides all labor, management, and equipment to operate two cafeterias in Building 100 and Building 16, a mobile food truck, and general catering services for over 1,200 personnel. In exchange for operating these facilities, the contractor will pay the Nonappropriated Fund Instrumentality either a monthly concessionaire fee or a percentage of gross sales, whichever is greater. The period of performance consists of a two-year base period from December 30, 2026, to December 29, 2028, with eight subsequent one-year option periods. Proposals are due by November 2, 2026, at 3:00 PM EST and must be submitted in two separate volumes covering commission percentages, financial capabilities, and operational plans. Award selection is based on the best overall value, with primary emphasis placed on the feasibility of the business plan, relevant past performance, and menu innovation. Contractors must adhere to strict food safety and packaging standards, including compliance with Tri-Service Food Code and Army Regulations, and ensure all food handlers are inoculated against Hepatitis A. Eligible offerors must maintain active registration in the System for Award Management and provide a unique entity identifier.

Food Service Contractors

POSTED

about 2 hours ago

DEADLINE

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Identification Marker SupplierThis subcontract involves the supply of seven identification markers, NSN 7690-01-693-4155, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected supplier is responsible for the fabrication and assembly of these markers in strict accordance with TDP Rev A Gen 1 and REFERENCE QAP 13873. Compliance with military standards is mandatory, specifically MIL-STD-129 for marking and MIL-STD-2073-1E along with RP001 DLA Packaging Requirements for packaging. Additionally, the provider must provide valid manufacturer and distributor codes to fulfill the requirements of this Department of Defense procurement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 21 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 21 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Technical Coating and Surface Treatment

LAND SUPPLY CHAIN

POSTED

CLOSED

Surface Treatment and Coating Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Surface Treatment and Coating Services

LAND SUPPLY CHAIN

POSTED

CLOSED

Specialty Metal Machining and Fabrication (Tier 2 Supplier)

ASC COMMODITIES DIVISION

POSTED

CLOSED

Heat Treatment and Surface Finishing Services

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Casting for Non-Rotating Eye Bracket

LAND SUPPLY CHAIN

POSTED

CLOSED

Precision Metal Pin Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Heat Treating and Surface Finishing Services

Defense Logistics Agency

POSTED

DEADLINE

Military-Grade Coating and Surface Treatment

Defense Logistics Agency

POSTED

DEADLINE

Phosphate Metal Finishing / Surface Treatment

Defense Logistics Agency

POSTED

DEADLINE

Cadmium Plating and Surface Treatment Services

ASC COMMODITIES DIVISION

POSTED

CLOSED

Specialty Metal Plating Services (Cadmium Plating)

ASC COMMODITIES DIVISION

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS