Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HEATING ELEMENT, ELE

Active
SPE8E8-26-T-4807Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of seven heating elements, identified by NSN 4520-01-619-5978, under solicitation SPE8E8-26-T-4807, issued by the DLA New Cumberland Facility under the Department of Defense. The response deadline is August 3, 2026, with delivery required within 167 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary compliant with NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies. The primary point of contact is Alexis Selby, reachable via email and phone provided, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.

General Info

Procure seven heating elements NSN 4520-01-619-5978, deliver within 167 days, no mercury except authorized uses, New Cumberland PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333414 - Heating Equipment (except Warm Air Furnaces) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E8-26-T-4807 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HEATING ELEMENT,ELE
HEATING ELEMENT,ELEMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 4520-01-619-5978 Quantity: 7 EA Purchase Request: 7017585875QTY: 7 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333414
New
DIBBS
Boiler Manufacturing and SupplyThe contract pertains to the design, fabrication, testing, and delivery of a single industrial boiler unit identified by NSN 4410016673882, fully compliant with ASME standards and all Defense Logistics Agency requirements. The work must be executed in accordance with stringent technical specifications to ensure operational safety, durability, and regulatory alignment, with performance concentrated at the New Cumberland location with the ZIP code 17070-5002. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under NAICS code 333414 for boiler and heat exchanger manufacturing. The project was posted on July 22, 2026, with a firm response deadline of August 3, 2026, and is managed by the DDSP New Cumberland Facility under the Department of Defense, emphasizing the critical nature of timely and precise execution for defense infrastructure needs.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Supply of Refrigeration Valves (CLIN 0002)The contract solicits the procurement and delivery of 35 refrigeration valves under a subcontract arrangement, with strict adherence to military packaging, marking, and destination inspection standards. The items are required to meet specifications aligned with Department of Defense requirements, ensuring readiness and compliance for military use. The place of performance is designated as Albany, Georgia, with the zip code 31704-1128, indicating where the delivered valves must be sent for acceptance and deployment. The North American Industry Classification System code 333414 identifies the industry as refrigeration and HVAC equipment manufacturing, confirming the technical scope of the supply. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, providing a twelve-day window for interested parties to submit proposals. The contract is managed under the Construction & Equipment MRO SVC I agency, reflecting its relevance to maintenance, repair, and operations support within the defense logistics structure.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Industrial Fluid Cooler Baffle Manufacturing and SupplyThe contract entails the full lifecycle production and delivery of 80 units of an industrial fluid cooler baffle identified by NSN 4420016125942, covering all stages from initial design through fabrication, quality control, packaging, labeling, and final shipment. All activities must strictly adhere to Defense Logistics Agency standards and requirements, ensuring compliance with technical specifications, performance criteria, and documentation protocols expected by the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with the delivery location tied to the DDSP New Cumberland Facility under the agency’s purview. The solicitation, issued under the NAICS code 333414 for other commercial and industrial machinery and equipment manufacturing, is structured as a subcontract with a response deadline of August 3, 2026, and was posted on July 22, 2026. While no set-aside classification or specific point of contact is provided, potential bidders are directed to the DIBBS platform for detailed submission instructions and procurement guidelines. The contract emphasizes end-to-end accountability, requiring certified quality assurance processes and precise adherence to military-grade packaging and labeling standards to support seamless integration into defense supply chains.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
FLOODLIGHT, ELECTRICThe contract is for the procurement of 76 electric floodlight fixtures under the NSN 6230-01-568-8451, sourced in accordance with military and federal specifications to ensure compliance with standardized performance and quality requirements. The purchase request number is 7017585241 and the delivery schedule requires fulfillment within 355 days from award. The solicitation, identified by number SPE8E7-26-T-3391, was posted on July 22, 2026, with responses due by August 3, 2026, and is being conducted as a fully competitive process. It falls under NAICS code 333414, which classifies it within the lighting equipment manufacturing sector. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with performance centered at the location in New Cumberland, Pennsylvania, zip code 17070-5002. Primary point of contact for inquiries is Kelly Mitchell, reachable via email at kelly.mitchell@dla.mil or phone at 4457377988, and additional details can be accessed through the DIBBS online portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
FAN, VENTILATINGThe contract solicits nine ventilating fans with NSN 4140-00-857-2766 under solicitation SPE8E7-26-T-3371 for delivery within 167 days of award. The item is subject to strict export-control regulations under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and successfully submitted the DLA Export-Controlled Technical Data Questionnaire. The Defense Logistics Agency enforces these controls for all contractors, including U.S. companies with foreign subsidiaries. The contract is issued by the Department of Defense through the DDS New Cumberland Facility, with a response deadline of August 3, 2026, and is classified under NAICS code 333414 for ventilating and air-conditioning equipment manufacturing. All communications and inquiries must be directed to the primary point of contact, Kelly Mitchell, at the provided email and phone number.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELEThe contract is for a non-immersion electrical heating element identified by NSN 4520-01-675-3965, with a quantity of one unit, under solicitation SPE8E8-26-T-4820. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 167 days after order award. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 333414 for heating equipment manufacturing. Performance is to be delivered to Tracy, California, 95304-5000, with Alexis Selby as the primary point of contact via email and phone. The contract is administered by the DLA San Joaquin office under the Department of Defense.
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
SHA DOOR STORAGEThe contract pertains to the procurement of 161 units of SHA DOOR STORAGE with NSN 4520-01-469-5585 under solicitation number SPE8E8-26-T-4797, issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The requirement mandates compliance with DLA Packaging Requirements for Procurement as outlined in the DLA Master List of Technical and Quality Requirements, which incorporates all referenced technical and quality standards identified by R or I numbers. The applicable revision of the master list is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it, in which case the amendment date governs. The contract further specifies that government identification must be removed from non-accepted supplies in accordance with RQ011. Delivery is required within 167 days after award, with the place of performance designated as New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the NAICS code 333414 applies. Primary point of contact is Alexis Selby, reachable via email at alexis.selby@dla.mil or phone at 312-444-8487. The contract is open to suppliers including Hunter Manufacturing Company Inc. in Solon, Ohio, and International Thermal Research Ltd. in Richmond, British Columbia, Canada.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING ELEMENT, ELEThe contract pertains to the procurement of nine heating elements, electric, identified by NSN 4520-01-527-6305, under solicitation SPE8E8-26-T-4833, with a response deadline of August 3, 2026. The item is required for delivery within 167 days of award, and the procurement is managed by the Department of Defense through the DDSP New Cumberland Facility. All suppliers must comply with DLA’s Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Only approved sources listed in the source control drawing are acceptable; non-approved offerors must secure prior approval from the original equipment manufacturer and submit relevant documentation with their proposal. Government identification must be removed from non-accepted supplies, and proprietary or insufficient technical data may restrict competitive bidding. The point of contact for inquiries is Alexis Selby, reachable via email and phone provided.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
SHA REAMERThe contract is for the procurement of 230 units of a SHA REAMER with NSN 4520-01-469-5757 under solicitation SPE8E8-26-T-4815, issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The unit price is $230.00 per each, with a total contract value of $52,900.00, and delivery is required FOB origin within 167 days from the award date, with the original required delivery date set for October 26, 2026. The item must be packaged in compliance with ASTM D3951 and fully aligned with MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements for Procurement. All technical and quality specifications referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements supersede ASTM standards. The item must be delivered to the designated DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. No variance in quantity is permitted, and the unit of issue is each. The contract includes a specific ship date of January 18, 2027, and references applicable DLA transportation procedures. Government identification must be removed from non-accepted supplies, and Covered Defense Information potentially applies to this procurement. The point of contact for inquiries is Alexis Selby.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
FAN, TUBEAXIALThis contract is for the procurement of six tube axial fans, identified by NSN 4140015423302 and part numbers 041383000 and 218071716, under solicitation SPE8E7-26-T-3390. The items must be delivered FOB origin within 167 days of contract award, with no tolerance for quantity variance, and are subject to inspection and acceptance at the destination. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment codes, and the use of unit packaging code U, with palletization adhering to DLA’s procurement packaging requirements. All supplies must be free from intentional addition of mercury or mercury-containing compounds, except for permitted functional uses such as in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents, with portable devices containing mercury requiring shockproof design and a secondary containment boundary as specified by NAVSEA 5100-003D. Delivery is directed to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a required ship date of January 18, 2027, though the original delivery deadline was November 5, 2026. The contract incorporates all referenced technical and quality standards from the DLA Master List, and the revision in effect on the solicitation issue date governs compliance. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and the unit of issue aligns with DoD and ANSI X12 standards. The contracting office is the Department of Defense, with primary point of contact Kelly Mitchell available for inquiries.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
LIGHT, INDICATORThis contract pertains to the procurement of three light indicators identified by NSN 6210-01-566-1729 and purchase request 7017585216, with a unit price of $3.00 and a total value of $9.00. The items must be delivered within 167 days, with a mandatory ship date of January 18, 2027, and are to be shipped FOB origin under solicitation SPE8E7-26-T-3384. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation methods, wrapping materials, and unit containers, while marking adheres strictly to MIL-STD-129 with no special marking codes. Inspection and acceptance occur at the destination, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces strict prohibitions against intentional use of mercury or mercury-containing compounds in the supplied hardware, except for explicitly permitted applications such as batteries, fluorescent lamps, specified instruments, sensors, weapon systems, and chemical reagents as defined by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation logistics follow DLAD Proc Notes C19 and C20, and compliance with DoD unit of issue standards is required. The contracting office is the Department of Defense via DDSP New Cumberland, with Kelly Mitchell listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
Federal
41--FAN,VENTILATINGThe contract seeks the procurement of nine ventilating fans with NSN 4140008572766, to be delivered to W1A8 DLA DISTRIBUTION within 167 days after contract award. This is a source-controlled item requiring strict adherence to drawing 54374 30DB-0361, and all units must comply exactly with the technical specifications outlined in the referenced drawing. The solicitation is issued as an RFQ under number SPE8E726T3371, with no hard copies available; all responses must be submitted electronically through the designated portal. Only responsible sources are eligible to quote, and timely electronic submissions are mandatory for consideration. The action is classified under NAICS code 333414 and is managed by DLA Troop Support, part of the Department of Defense, with the contracting office located in Philadelphia, Pennsylvania. The point of contact for inquiries is provided via email, directing all questions to the buyer listed in the solicitation’s block 5, accessible through the official DIBBS website or the provided link. The response deadline is August 3, 2026, and the solicitation was posted on July 22, 2026.
DLA Troop Support

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 484220
New
DIBBS
Logistics, Transportation, and Destination DeliveryThe contract requires the secure transportation of structural steel plates using flatbed or heavy haul trucking to a designated DoDAAC destination at the New Cumberland facility, with a zip code of 17070-5002. All shipments must adhere to strict loading protocols to ensure cargo integrity and compliance with destination inspection standards, emphasizing safety and regulatory alignment throughout transit. The work falls under NAICS code 484220 for truck transportation of freight and is categorized as a subcontract with a response deadline of August 3, 2026, following a posting date of July 22, 2026. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility, and performance is exclusively tied to the specified location, with no flexibility in delivery points.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of compliant packaging, preservation using method ZZ, and permanent marking of structural steel plates in accordance with military and ASTM standards, ensuring all components meet rigorous defense specifications for durability and traceability. Work must be performed to exact technical requirements that guarantee long-term integrity and identification of steel plates used in critical defense applications. The solicitation is categorized as a subcontract with a NAICS code of 332999 and is hosted by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated at the New Cumberland location, zip code 17070-5002. The posting date is July 22, 2026, and proposals must be submitted by August 3, 2026, with no set-aside provisions specified. Bidders are expected to demonstrate capacity to deliver compliant packaging and marking solutions aligned with federal defense logistics standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331221
New
DIBBS
High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.
Rolled Steel Shape Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333517
New
DIBBS
Supply of Jewelers’ Lathe (NSN 3416008409717)The contract requires the procurement, packaging, marking, and delivery of three units of a Jewelers’ Lathe identified by NSN 3416008409717, with all work to be performed in full compliance with military packaging, labeling, and identification standards. Delivery is to be made under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The equipment must meet all applicable military specifications for functionality, durability, and documentation to ensure compatibility within defense supply chains. The solicitation is issued as a subcontract under the NAICS code 333517, indicating the nature of the work falls within precision instrument and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the deliverables will be received or inspected. Although no point of contact or solicitation number is provided, the official link to the DIBBS platform is included for further details. The contract does not specify a set-aside designation, suggesting it is open to all eligible suppliers without preferential classification.
Machine Tool Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Marking, and Preservation ServicesThe contract requires the provision of packaging, marking, and preservation services adhering strictly to MIL-STD-129 standards to ensure all military items are properly prepared for shipment and long-term storage. This includes compliant labeling, protective wrapping, corrosion inhibition, and secure containment procedures designed to maintain equipment integrity under diverse environmental conditions during transport and in garrison. The work must support the Department of Defense’s logistical readiness requirements with an emphasis on traceability, durability, and adherence to federal military specifications. This is a total small business set-aside solicitation under NAICS code 561910, meaning only small businesses certified by the SBA are eligible to compete. The opportunity is classified as a subcontract and is managed by the DDSP New Cumberland Facility under the Department of Defense. Responses are due by August 3, 2026, with performance centered at the New Cumberland location, ZIP 17070-5002. All contractors must be fully equipped to meet stringent military packaging protocols and demonstrate the capacity to deliver consistent, high-quality preservation services that align with national defense logistics standards.
Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels and Material Safety Data Sheets for all non-exempt hazardous materials, ensuring full compliance with OSHA’s Hazard Communication Standard and other applicable federal regulations. This effort is critical to maintaining workplace safety and legal adherence for hazardous material handling within Department of Defense operations. The work must be performed at the New Cumberland facility with a zip code of 17070-5002, and all deliverables must meet current federal standards for chemical safety communication. This is a subcontract solicitation under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA may respond. The NAICS code 541690 indicates the scope falls under other scientific and technical consulting services, emphasizing the specialized nature of the compliance and labeling services required. The solicitation was posted on July 22, 2026, with a firm response deadline of August 3, 2026, and is managed by the DDSP New Cumberland Facility under the Department of Defense. All proposals must demonstrate proven capability in delivering accurate, up-to-date hazard communication documentation consistent with federal mandates.
Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Supply of Nonelectrical Copper Alloy WireThe contract outlines the procurement and delivery of 9,000 CL of nonelectrical copper alloy wire made from ALLOY 270 with a diameter of 0.064 inches, requiring strict adherence to technical specifications, MIL-STD-129 labeling standards, and hazardous materials compliance protocols. The material must meet all defined performance and quality requirements without electrical application, ensuring suitability for industrial or mechanical use as intended. All packaging, marking, and documentation must conform to federal military standards to guarantee traceability, compatibility, and safety during handling and transport. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by FAR 19.5, with the NAICS code 335999 covering other electrical equipment and components manufacturing. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and is issued as a subcontract under the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The place of performance is located in New Cumberland, Pennsylvania, with zip code 17070-5002, indicating where the delivered goods must be shipped and accepted. The procurement is accessible via the DIBBS platform for qualified interested parties to submit proposals.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Notification (If Applicable)The contract requires the execution of radiation testing on the SHA Reamer to determine the presence of radioactive materials, with a specific threshold of 0.002 microcuries per gram triggering mandatory notification. If testing reveals levels exceeding this limit, advance warning must be provided to the contracting authority prior to any further handling or movement of the equipment. The work is governed under a subcontract classification with a NAICS code indicating specialized scientific and technical consulting services, and the performance location is designated as New Cumberland, Pennsylvania with a zip code of 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with the Department of Defense through its DDSP New Cumberland Facility serving as the contracting organization.
Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of Safety Data Sheets, hazard warning labels, and all necessary regulatory compliance documentation for the SHA Reamer should it be classified as a hazardous material. This obligation ensures adherence to federal and international standards for handling, transporting, and storing potentially dangerous substances, with full documentation to support regulatory requirements across all stages of use. The work must be delivered in accordance with applicable regulations governing hazardous material identification and communication, with precision and timeliness being critical to meet compliance obligations. The solicitation is issued under the NAICS code 541620 for other scientific and technical consulting services and is categorized as a subcontract opportunity managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. Performance is required at the designated location in NEW CUMBERLAND, Pennsylvania with a zip code of 17070-5002. The response deadline is August 3, 2026, and the opportunity was posted on July 22, 2026. No set-aside provisions are specified, and the contract is open to qualified subcontractors capable of delivering accurate, compliant documentation for hazardous materials classification and labeling.
Environmental Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of SHA Reamer (NSN: 4520014695757)The contract requires the manufacture, sourcing, packaging, labeling, and delivery of 230 units of SHA Reamer under military specifications, with strict adherence to all applicable standards, including proper handling of hazardous materials if present. The item is identified by National Stock Number 4520014695757 and must be produced and delivered in full compliance with military requirements to ensure operational readiness and safety. Performance is designated for the New Cumberland location with the zip code 17070-5002, and the work falls under the NAICS code 332999 for other fabricated metal product manufacturing. The opportunity is structured as a subcontract and is open for response until August 3, 2026, with the solicitation posted on July 22, 2026. The contracting activity is the DDSP New Cumberland Facility under the Department of Defense, though no specific point of contact or set-aside details are provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Sustainable Products Compliance (Environmental Standards)This contract requires strict adherence to FAR 52.223-23 to ensure all delivered products meet environmental standards for sustainability, focusing on the use of environmentally preferable materials and packaging. The subcontractor must verify and document compliance through detailed records that demonstrate procurement of materials and packaging aligned with federal sustainability guidelines, including life-cycle assessments, recycled content, and reduced environmental impact. Performance is tied to deliverables that explicitly reflect these criteria, with no flexibility for non-compliant alternatives. The opportunity is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. Classified under NAICS code 541620 for management consulting services, the contract is structured as a subcontract and has a response deadline of August 3, 2026. All submissions must be finalized by this date, and the solicitation remains open for participation without any set-aside designation. The contracting entity expects full transparency and traceability in sourcing and documentation to affirm environmental compliance throughout the supply chain.
Environmental Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
DIBBS
Government Logistics & WAWF Compliance SupportThe contract requires support for the submission of government logistics documents—including support invoices, receiving reports, and combo documents—through the Web-based Applied Workflow (WAWF) system, ensuring full compliance with Department of Defense payment protocols. Accurate routing via DoDAAC codes is critical to facilitate timely and error-free processing of transactions, and all submissions must adhere strictly to DoD standards to avoid payment delays or rejections. The work is focused on maintaining operational integrity within the logistics flow tied to the DDSP NEW CUMBERLAND FACILITY, with performance centered at the 17070-5002 zip code location. This subcontract, posted on July 22, 2026, under NAICS code 541611 for management consulting services, has a response deadline of August 3, 2026. It falls under the purview of the Department of Defense and is intended to bolster the efficiency and compliance of financial and logistical documentation processes. While no specific set-aside details are provided, the nature of the work demands precision in document handling, system navigation, and adherence to federal acquisition regulations as they pertain to defense contracting logistics. All services must align with the DoD’s expectation for seamless, audit-ready, and secure transaction workflows through WAWF.
Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

in 11 days
View Details