Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Heavy Industrial Forging and Machining

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precision forging, heat treatment, and machining of a 90-ton snatch block to meet the rigorous mechanical properties specified by ASTM A128, ensuring structural integrity and performance under extreme loads. The component must successfully pass proof load testing as a mandatory requirement, validating its safety and reliability for heavy industrial use. All manufacturing processes must adhere to strict quality control standards to achieve the desired material characteristics and dimensional accuracy. Work is to be performed at a designated location in Anniston, Alabama, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. The contract is classified as a subcontract under NAICS code 332111 for forged steel product manufacturing, and it is procured by the Department of Defense through the Construction & Equipment Manufacture & Con organization. Performance must align with defense-grade specifications, emphasizing durability, traceability, and compliance with applicable military and industrial standards.

General Info

Forge, heat treat, and machine 90-ton snatch block to ASTM A128, pass proof load test, meet DoD standards in Anniston, Alabama by August 3, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

ANNISTON, AL, 36201-4199, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Precision forging, heat treatment, and machining of a 90-ton SNATCH BLOCK to meet ASTM A128 mechanical properties and proof load testing requirements.

Similar Contracts

Same NAICS industry code

BAR, METALThe contract covers the procurement of 202 linear feet of corrosion-resistant cold-finish annealed round steel bar , 3 inches in diameter, with lengths strictly in whole feet between 10 and 12 feet, and a weight of approximately 24.03 pounds per foot. The material must conform to SAE AMS-QQ-S-763D Revision D and be classified as Class 304, CF, Annealed, Descal, with full compliance to referenced standards including ASTM A700-14, MIL-STD-129R, and SAE AMS2806. All units must be marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that are legible, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with preservation methods compliant with ASTM A700 and special codes Z and ZZ for marking and packaging. Mercury and mercury-containing compounds are strictly prohibited in the material, preservation, packaging, and marking, except for exempted functional applications as specified by NAVSEA. Class I ozone-depleting chemicals are also banned. The supplier must be on the Qualified Suppliers List for Distributors (QSLD) under DLA Troop Support requirements, and non-compliance constitutes an unauthorized substitution with possible criminal penalties. The contract waives source inspection requirements for approved QSLD suppliers, and all deliveries are FOB origin with inspection and acceptance at destination. The shipment must be delivered within 168 days to the designated DLA distribution facility in New Cumberland, PA, with a permitted quantity variance of plus or minus 10%.

NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

VALVE ASSEMBLY, DRIVThe contract pertains to the procurement of a valve assembly, part number AA-A089BEP-4D6A manufactured by PALL AEROPOWER CORPORATION, identified by NSN 4820012989351, with a total quantity of 20 units. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and be packed in accordance with ASTM D3951 unless superseded by the DLA Master List. The unit of issue is each (EA), with no variance allowed in quantity—zero percent plus or minus. Delivery is FOB origin with inspection and acceptance occurring at the destination after a 168-day lead time, with an original required delivery date of May 25, 2027. The ship date is set for January 19, 2027. All packaging and palletization must meet DLA’s RP001 requirements, and transportation is governed by DLAD Proc Note C19 and C20. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The solicitation number is SPE7MC-26-T-150R, issued under NAICS code 332111, with a response deadline of August 3, 2026, and a primary point of contact at DLA is Paula McClary, reachable via email and phone provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

Domestic Component Supplier (Bearing Sub-Assemblies)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machining and Metal Fabrication of Steering Column HousingThe contract calls for the precision manufacturing of a military-grade steering column housing, requiring advanced metalworking processes including CNC machining, forging or casting, heat treatment, and meticulous finishing to ensure compliance with stringent dimensional tolerances and operational durability requirements. The component must meet exacting military standards for performance under extreme conditions, with all fabrication steps rigorously controlled to guarantee structural integrity and reliability in combat vehicle applications. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to bid, as defined by SBA regulations under NAICS code 332111, which pertains to forged steel and steel forging operations. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense under LSO COMBAT VEHICLES AND ARMAMENT. The place of performance and specific office address are not provided, but the work is intended to support defense systems and must be performed in compliance with federal acquisition guidelines. Interested parties must submit proposals through the official DIBBS portal prior to the deadline, and all manufacturing capabilities must be fully accredited to handle classified or controlled military hardware without compromise to security, quality, or traceability standards.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Ring Spacer Components (NSN: 5365016624377)The contract is for the manufacture and delivery of precision metal ring spacer components with National Stock Number 5365016624377, intended for use in defense logistics or mechanical systems. It is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code is 332111, indicating the work falls under forgings and stampings manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and the place of performance is specified as San Diego, California, with a ZIP code of 92136-3581. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific contact information is not provided in the data. The full solicitation can be accessed via the DIBBS portal using the provided UI link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Copper Alloy Pipe Fitting Manufacturing (Casting)

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Precision Metal Casting ManufacturingThe contract requires the manufacture of ten precision metal castings designated for defense applications, adhering to zero-defect quality standards and the use of custom tooling specifically developed for this project. Each unit must meet exacting tolerances and performance specifications inherent to military-grade components, with production processes subject to rigorous inspection and verification protocols. The work is scoped under NAICS code 332111, classifying it as a subcontract for metal casting, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating a direct alignment with national defense supply chain priorities. The solicitation is open with a response deadline of July 30, 2026, and is accessible via a public DIBBS portal, though no solicitation number or point of contact is provided. There is no set-aside designation, meaning the contract is open to all qualified suppliers regardless of business size or certification status. The place of performance is not specified, allowing flexibility in manufacturing location, but all components must be delivered to meet defense logistics timelines and standards. The emphasis on precision casting and zero defects underscores the critical nature of the components, likely intended for high-stress or mission-critical defense systems where failure is not an option.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Hardware Manufacturing – Lock Washer ProductionThe contract pertains to the manufacture of lock washers in strict compliance with military specifications, ensuring adherence to the National Stock Number NSN 5310015523971. The product must meet precise material composition standards, dimensional tolerances, and mechanical performance criteria to guarantee functionality and reliability in defense applications. The work is classified as a subcontract under NAICS code 332111, indicating a focus on forging and stamping operations, and is issued by the Aviation Supply Chain ESOC Buys division of the Department of Defense. All production activities are expected to align with the stringent quality and consistency demands inherent to military hardware. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, giving interested parties a limited window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS platform for full documentation and submission requirements. There is no set-aside designation, meaning participation is open to all eligible subcontractors, and the agency is seeking capable manufacturers capable of delivering certified lock washers on schedule to support defense supply chain needs.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ANGLE, STRUCTURALThis contract specifies the procurement of structural steel angle shapes with exact dimensions of 3.000 inches in height and width, 0.375 inches in thickness, and lengths ranging from 30 to 40 feet, weighing approximately 7.200 pounds per foot. The material is identified as steel UNS K02600 and must comply with ASTM A6 Table A2.7 for equal-legged L-shapes, with all requirements aligned to ASTM A6/A6M-24B and ASTM A36/A36M-19. Material must be supplied in whole-foot lengths only and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required for items under 0.250 inches nominal OD. Certification of quality compliance, including mill material certification, is mandatory with each shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. The procurement is governed by strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official QSLD to be considered for award; any deviation constitutes an exception and must be explicitly declared. The government waives source inspection requirements for qualified suppliers, and failure to comply with QSLD terms may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and palletization must meet DLA packaging requirements. The item is designated a critical application, and the total quantity is 768 linear feet to be delivered within 69 days FOB origin to Tracy, CA, with a permitted quantity variance of plus or minus 10 percent. The contract references multiple technical data packages and quality assurance protocols, including CDRL-METALSCERT, and requires strict adherence to all DLA procurement notes and technical requirements as published in official DLA documentation.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

SHAFT, TURBINE, AIRCRAFTThe contract pertains to the procurement of two aircraft gas turbine engine turbine shafts, identified by NSN 2840-00-837-2071 and part number 3011095, manufactured by Pratt & Whitney Canada Corp and sourced through the Canadian Commercial Corporation. This is a Critical Safety Item designated by the Air Force, subject to stringent quality and cybersecurity controls including CMMC Level 2 self-assessment and compliance with SAE AS9100 for non-tailored higher-level quality requirements. Manufacturing must follow a forging process, requiring specialized tooling, and all supplies must adhere to MIL-STD-129 marking standards with lot and serial numbers, contractor and manufacturer cage codes, and part numbers included on each unit pack. Inspection and acceptance occur at origin under zero-defect sampling principles per MIL-STD-1916 or comparable zero-based plans, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Tooling and sourcing inquiries must be directed to designated DLA supply chain teams. The item must be packaged per MIL-STD-2073-1E with specified preservation methods and materials, and palletized according to DLA packaging requirements. Delivery is due in 88 days after award under a firm fixed price structure with no tolerance for quantity variance. All waivers or deviations require formal approval from the DSC Contracting Officer, and the item is subject to Covered Defense Information protocols and government identification removal procedures for non-accepted items.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

END PLATE, COOLERThe contract is for the procurement of six END PLATE, COOLER units with NSN 9520-01-612-5770, under solicitation SPE8E4-26-T-1921, issued by DLA District San Joaquin on behalf of the Department of Defense. The delivery requirement is for shipment FOB origin within 167 days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at the receiving warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and marking instructions provided, including the use of D3 intermediate containers and no special marking. Metal certification requirements are mandated through CDRL-METALSCERT, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit price is $6.00 per item for a total contract value of $36.00. The contract mandates adherence to DLA packaging, marking, and shipping protocols, including RP001 and IP083 for metal products, with all materials requiring proper preparation and labeling before delivery. The shipping and delivery address is standardized to the DLA receiving facility at 25600 S Chrisman Road, Tracy, CA 95304-5000. The original required delivery date is February 7, 2027, with a need ship date of January 18, 2027, allowing minimal buffer for logistics. Transportation and freight details follow DLAD Proc Note C19 and C20. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the NAICS code 332111 identifies the industrial category as forged steel and stampings. Primary point of contact is Pamela Duffey, with phone and email provided for coordination, and procurement is conducted under the DoD's authorized unit of issue system with referenced ANSI X12 mappings available via official DLA links.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

BAR, METALThis contract specifies the procurement of steel bar stock composed of UNS K23080 alloy, supplied in round form with a 3.000 inch diameter and lengths between 10 and 12 feet in even-foot increments only, weighing 24.03 pounds per foot. The material must meet stringent technical and quality standards outlined in referenced specifications including SAE AMS6427P, ASTM A700-14, and MIL-STD-129R, with all requirements governed by the DLA Master List of Technical and Quality Requirements. A Certificate of Quality Compliance, or mill-material certification, is mandatory and must accompany each shipment, with a copy forwarded directly to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions, all applied via stamping or stenciling using non-contaminating, waterproof inks that remain legible under normal handling. Adhesive labels are permitted for bars under 0.250 inch nominal diameter, while tags are acceptable for wires. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes an exception that must be explicitly declared; failure to comply may result in criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ applied in accordance with ASTM A700, and all marking must follow MIL-STD-129 specifications. Items are to be shipped FOB origin, with a 10% variance allowed in quantity, inspected and accepted at destination. The delivery timeframe is 167 days from solicitation issue, with an original required delivery date of January 22, 2027. The product is designated a critical application item, and all documentation including CDRL-METALSCERT is required unless waived under QSL program compliance. No source inspection is required for QSL-compliant suppliers, and preservation methods must align with ASTM A700 standards. All shipments must be labeled with the specified parcel post address and delivered to the DLA Distribution facility in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

CAP ASSEMBLY, FILLER, VEThe contract pertains to the procurement of two units of a miniature vented cap assembly, identified by NSN 1730-01-131-4493 and part number 7M710-1, with an alternate part number FCS-M from Lenz Inc DBA The Lenz Company. The item is to be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including preservative methods and unit container specifications. Marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA packaging standards. The delivery address is a military post office in APO AE 09309-9998, while the freight shipping address is Al Udeid Air Base in Qatar under the U.S. Air Force Prepositioning Program. The contract number is SPE8EF-26-T-1509, and technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The item falls under NAICS code 336413, and the point of contact is Russell Keiser, with the required delivery date set for July 14, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

GLAND ASSEMBLY, ACCUMULThe contract specifies the procurement of a gland assembly for an accumulator, furnished by Parker Hannifin Corporation with part number RG2AHL0105 and NSN 3950011749066, requiring 52 units to be delivered within eight days under FOB origin terms. The item is classified as a critical application product with a non-extendable 240-month shelf life, designated as a TYPE I (CODE Z) item, and must be packaged and preserved in full compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards. All packaging must adhere to DLA’s RP001 requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and contact with the hardware, except for specific functional uses authorized by NAVSEA such as in batteries or instruments, which must include a secondary containment boundary. Sampling inspections must follow zero-defect acceptance criteria under MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical attributes requiring the highest verification levels; unspecifed attributes are treated as major. The item must not be shipped with any mercury-based materials, and special marking code 32 indicates its shelf-life status. Delivery is directed to DLA Distribution at New Cumberland, Pennsylvania, with a required delivery date of July 20, 2026, and no variance in quantity is permitted. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract is issued under solicitation SPE8EE-26-T-2171 with a response deadline of August 3, 2026.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 17 hours ago

DEADLINE

VENT UNIT, RELIEFThe contract pertains to the procurement of one VENT UNIT, RELIEF with NSN 4930-01-680-1772 under solicitation SPE8EE-26-T-2166, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. The item is required to be delivered within 20 days of award to Twenty Nine Palms, California, 92278-8151, and responses must be submitted by August 3, 2026. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Covered Defense Information potentially applies, indicating sensitivity and security obligations. The primary point of contact is Philip Ferrara, reachable via email and phone as provided.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

COVER SET, AIRCRAFT

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

FIBER ROPE ASSEMBLY, SI

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

JACK, HYDRAULIC, TRIP

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 17 hours ago

DEADLINE

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 17 hours ago

DEADLINE

PARTS KIT, LUBRICATOR

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

PLUG, INLET, HIRSS

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

FITTING, EXTERNAL, JA

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

NOZZLE, EDUCTOR

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE