This Solicitation opportunity from Department Of Defense was posted on September 16, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Heavy Wheeled Paver

Closed

F3N0520218AW03Federal

Submission Closed09/18/2020, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

Federal

Hull & Structural Steel Fabrication and RepairThis subcontract, titled Hull and Structural Steel Fabrication and Repair, involves performing critical steelwork for the USCGC BARBARA MABRITY under the Department of Homeland Security. The scope of work includes the cropping and renewal of corroded steel plating in various weights, as well as structural weld repairs specifically targeting cracked welds within the engine room demisters and the bow thruster room. The project is designated as a total Small Business Set Aside under NAICS code 333120. To ensure the integrity of the structural repairs, all work must adhere to strict welding certifications per SFLC Standard Specification 0740 and NAVSEA TP 1688. The contract was posted on October 19, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

BULLDOZER FOR SHIPROCK FIELD OFFICEThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the procurement of a bulldozer to support the Shiprock Field Office. This requirement is categorized under NAICS code 333120, which pertains to agricultural and forestry machinery and equipment manufacturing. The forecast was posted on October 18, 2026, and serves as a notification of upcoming procurement needs. Interested parties may coordinate with the Small Business Program Managers, Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

MMO T-LINES PURCHASE TWO NEW BOBCAT SKIDSTEEERS UNITS, EO 14398The Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the procurement of two new Bobcat skid steer units under EO 14398. This acquisition is categorized under NAICS code 333120, which pertains to the manufacturing of agricultural and forestry machinery. The forecast was posted on October 18, 2026, and is managed by the Small Business Program Managers. Interested parties can find further details through the Department of Energy's public acquisition forecast.

Western Area Power Administration

POSTED

DEADLINE

Supply and Delivery of a Ride-on Trencher

Solicitation # RFQ 26-0487

The City of Saskatoon has issued solicitation RFQ 26-0487 for the supply and delivery of a new, factory-installed ride-on trencher. The procurement process is based on the lowest total price among qualified bidders. To be considered, respondents must be a single legal entity, registered on the City's electronic bidding system, and pass a three-stage evaluation consisting of a mandatory submission review, a technical requirements assessment, and a final pricing score. The equipment must meet all Canadian federal, provincial, and municipal safety standards for roadway operation, featuring tempered safety glass with UV protection, a minimum tractor weight of 4,400 kg, a hydraulic tank capacity of at least 95 L, and antifreeze rated for -40 degrees Celsius or colder. Reference models such as the Ditch Witch RT125 and Vermeer RTX1250 are noted as acceptable. The successful supplier is required to provide a thorough pre-delivery inspection report to City of Saskatoon Fleet Management and deliver the unit to 75 King Street, Saskatoon. Deliverables include an operator's manual, a parts manual, and a service manual, along with onsite operator and mechanic training at no additional cost. The contractor must ensure parts availability and service support for at least ten years from the delivery date. Administrative requirements include maintaining a minimum of 2,000,000 dollars in commercial general liability insurance as a pre-condition of award and ensuring all invoices and packing slips reference the purchase order number. All submissions must be uploaded in a fixed format to the bidding portal by November 20, 2026, at 2:00:59 PM CST.

POSTED

DEADLINE

BRUSH SECTION, ROTARY S

Solicitation # SPE7L1-27-T-0112

Solicitation SPE7L1-27-T-0112 is a fixed-price request for quotations issued by the Defense Logistics Agency Land Supply Chain for the procurement of 21 rotary sweeper brush sections. The required items are identified as Caterpillar Inc part number 157-2556 and NSN 3825-01-626-0365. Delivery is required within 20 days after order, with an original required delivery date of August 10, 2026. The terms are FOB Destination, with both inspection and acceptance occurring at the destination. Shipping is directed to the Naval Mobile Construction Battalion at Seabee Camp Shields, with specific addresses provided for both parcel post in FPO AP and freight in Chibana, Okinawa, Japan. The procurement is governed by NAICS code 333120 and requires strict adherence to the Buy American Act and Berry Amendment. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. All quotes must be submitted via the DLA Internet Bid Board System by October 15, 2026. Additional compliance mandates include DFARS cybersecurity standards for safeguarding covered defense information and the prohibition of additive manufacturing unless specifically authorized.

POSTED

DEADLINE

Supply of Compact Electric Drive Wheel Loader

Solicitation # RFQ-27-052

Okanagan College is soliciting competitive quotations under RFQ-27-052 for the supply of one Compact Electric Drive Wheel Loader to support a training course for Red Seal technicians specializing in electric vehicles. The equipment, which can be new or used with a preference for units having fewer than 100 operating hours, must be delivered to the Kelowna Campus Central Receiving by December 9, 2026. The vehicle must be built to SAE standards and comply with the BC Motor Vehicle Act, the Federal Motor Vehicle Safety Act, and WorkSafe BC Regulations, and it must be delivered with a current Commercial Vehicle inspection certificate. The award will be granted to the compliant respondent offering the lowest price following a three-stage evaluation process consisting of a review of mandatory submission requirements, a technical requirements assessment, and a pricing evaluation. All-inclusive pricing must cover labor, materials, insurance, delivery, and installation. Interested suppliers must submit their quotations electronically via the specified bidding portal by November 9, 2026, including a completed submission form, pricing form, specification form, and a detailed warranty statement. The anticipated execution date for the agreement is November 16, 2026.

POSTED

DEADLINE

Solicitation H-26-312W is issued by the Arkansas Department of Transportation Equipment and Procurement for the acquisition of snowplows and spreaders. This SLED organization opportunity is based in the state of Arkansas and is currently open for responses. The solicitation was posted on October 15, 2026, and requires all submissions to be completed by the response deadline of November 3, 2026, at 5:00 PM. Interested parties can find further details and submission guidelines through the provided Bid Express link.

Arkansas Department of Transportation - Equipment and Procurement

POSTED

DEADLINE

Airfield Snow and Ice Control Equipment SupplyThis small business set-aside subcontract, managed by the Department of Defense through W6QM Micc-Ft Drum, focuses on the supply of heavy machinery for prime contractors working on MICC projects. The scope of work involves providing specialized airfield snow and ice control equipment, specifically snow brooms, roll-over plows, 5YD and 3YD loaders, and liquid trucks. All delivered machinery must strictly adhere to military airfield specifications and is defined under CLINs AET01 through AET05. The contract is categorized under NAICS code 333120 and is designated for performance in the 13602 zip code area. It was posted on October 15, 2026, with a response deadline set for October 14, 2031. This long-term procurement effort ensures that critical infrastructure equipment is available to maintain operational readiness for military airfield snow and ice management.

POSTED

DEADLINE

Tracked Crawler Carrier SupplierThis subcontract agreement establishes the supply of three purpose-built utility crawler carriers to support prime contractors working on projects for the Alaska Department of Transportation and Public Facilities. Each unit must meet rigorous technical specifications, including a minimum of 255 HP, a 6.7L engine displacement, a two-speed hydrostatic transmission, and zero-turn capability to ensure operational efficiency in demanding environments. To ensure operator safety and comfort, the carriers are required to feature enclosed ROPS/FOPS certified cabs equipped with heating and air conditioning. Additionally, each vehicle must be outfitted with hydraulic front winches. This procurement falls under NAICS code 333120 and is managed through the State of Alaska.

Transportation and Public Facilities

POSTED

DEADLINE

146489 Headworks Reservoir - GF10000PW Electric Mixer Replacement

Solicitation # 232480

The City of Los Angeles Department of Water and Power is seeking bids for the Headworks Reservoir GF10000PW Electric Mixer Replacement project. This solicitation, identified by number 232480, falls under NAICS code 333120 and will be performed in Los Angeles, California. Interested parties should coordinate with the point of contact, Jamie L. Vasquez, for further inquiries. The deadline for responses is November 3, 2026, at 10:00 PM UTC. All bids must be submitted electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. Detailed submittal requirements are available within the official bid documentation.

POSTED

DEADLINE

SEF2495 Tracked Drill Rig and Tracked Flatbed

Solicitation # 225556

The State of Alaska Department of Transportation and Public Facilities, HQ State Equipment Fleet, is soliciting bids for the one-time purchase of one heavy-duty mechanical geotechnical tracked drill rig and two tracked flatbeds equipped with hydraulic hook lifts. The drill rig must be capable of rotary drilling, auger drilling, rock coring, and soil sampling, professionally mounted to a crawler carrier such as a Terramac RT9U or an approved equivalent. Key technical requirements include a minimum 255 HP engine and 44,180 lb GVWR for the carrier, a 32,500 lb minimum push force and 3.5 inch spindle bore for the drill, and a 20,000 lb minimum capacity for the hook lift. All equipment must be new, current-production models, painted OEM Standard Yellow, and include a GPS tracking system with a three-year subscription. The contract will be awarded to the lowest responsive and responsible bidder. Bidders may qualify for various preferences, including Alaska Product Preferences (3% to 7%), Local Agricultural and Fisheries Products Preference (7%), and Alaskans with Disabilities Preference (10%). Bids must be submitted by November 6, 2026, at 2:30 PM, with requests for amendments due by October 28, 2026. Delivery is required within a maximum of 180 days after receipt of order, with the FOB point located at dockside Seattle/Tacoma. The agreement includes a 12-month lemon clause, a requirement for prices to remain firm for 180 days after bid opening, and a 30-day notice period for cancellation for convenience by the state. Payment for agreements under $500,000 will be processed within 30 days of receipt of a proper invoice and delivery.

Transportation and Public Facilities

POSTED

DEADLINE

Notice to Bidders Towable Man lift

Solicitation # 4438992

Marshall County, Mississippi, is soliciting sealed bids for the purchase of a new Towable Man Lift. Interested parties must submit their bids to the office of the County Administrator in Holly Springs or electronically via centralbidding.com. The deadline for all submissions is 10:00 A.M. on Monday, November 16, 2026. Detailed specifications for the equipment are available through the County Administrator's office. The Marshall County Board of Supervisors maintains the authority to reject any bids or waive formalities to serve the best interests of the county. Primary contact for this solicitation is Donna Cooper.

Marshall County, MS

POSTED

5 days ago

DEADLINE

in 27 days

General Info

Agency

Department Of Defense → FA5613 700 Cons Pk

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

Savannah, TX, 76227, USA

Set-Aside

NONE

Documents

Salient+Characteristics.pdf

Whelled+Paver+RFQ.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedSep 11

Solicitation

Notice updatedSep 16

The notice description changed.

Response DeadlineSep 18

Deadline has passed

Submission Closed

09/18/2020, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA5613 700 Cons Pk

Contacts2 people available

OfficeAPO, AE, 09021-3076, USA

Organization / AgencyDepartment Of Defense → FA5613 700 Cons Pk

Office AddressAPO, AE, 09021-3076, USA

Contacts

Daira Rodriguez

contact@example.gov

Warren Jenkins

contact@example.gov

Full Description

THIS IS FOR DELIVERY IN GERMANY 786 CES/CEOHP Facility # 2191 66877 Ramstein Air Base 1 Wheeled Paver, Type: Super 1303 - 3i (V), with equipment, (OR EQUAL) 1x Wheeled Paver Wheeled Paver basic width: 1,850 mm total length: 4,950 mm turning radius: 3,800 mm engine: 74.4 kW drive: front wheel drive (6 x 4) with AB 340 Extending Screed in TV-Version with Ergo plus 3 Drive unit Deutz diesel engine, Type: TCD 3.6 L4, or equal liquid-cooled 74,4 kW at 2000 rpm engine complies with the emission standards of the European Union Stage V and USA EPA Tier 4f electronic engine management with ECO mode and variable-speed fan drive Undercarriage hydrostatic traction drive with electronic traction control 2 powered wheels with tubeless tires 365/80R20 4 front wheels of solid elastic rubber, 460/250-310 second steering axle, powered service brake (multiple-disk brake, hydraulically pressurized) and hydraulically actuated parking brake Conveyors and augers push-rollers, displaceable forwards by 80mm material hopper with 10 t capacity, hopper front can be folded up four separate hydrostatic drives for conveyors and augers conveyors reversible augers can be reversed and adjusted in height manual override for augers mechanical paddle sensors for controlling the conveyors automatic filling of auger tunnel set of limiting plates, folding and extendable paver Electrical system 24V on-board voltage Heating system three-phase generator with generator management heating of screed when diesel engine is running Operator's platform 2x operator's seats, pivotable outwardly operator's seats and console can be adjusted for ergo working ErgoPlus-3 paver operator's console for operation and monitoring of paver functions 2x ErgoPlus-3 screed consoles for the right- and left-hand screed sides, with color display for setting up and monitoring paver- and screed-functions AB 340-3 extending screed, or equal Compation TV Pave width: 4,500 mm Bolt-on extensions, 2 x 550 mm Hardtop with sunshades 2x operator's seat, ergonomic, heated 2x rearview mirror, paver with hardtop Working lights, halogen Hopper front, hydraulic 2x sensors for auger control Auto set basic, includes auger height adjustment (hydraulic) Traction drive (6x4) Hydraulic system filled with mineral oil Warning labels, standard Packing for land transport Paint finish, green Tires, water-filled Operating instructions Fleet view, telematics solution to optimize machine use and servicing, includes a control unit (TCU) with a GPS receiver. The web access function offers a compact overview of the machine status including consumption data, working times, position data, error messages and service intervals. Operating instructions for screed Crown, hydraulic adjustment 2x working lights for auger tunnel, 24V All-round beacon, paver with hardtop Reverse bleeper, acoustic System for automatic grade and slope control (Niveltronic) Slope sensor, the inclination sensor can be used in combination with an inclination sensor up to a pavement width of 6.5 m. It measures slopes of +/- 10%. 2x bracket for grade sensor 1x mechanical grade sensor, variable, with large multi-segment display and integrated ambient lighting, and with skis (300 mm and 1000 mm long) as well as a bow for referencing a tensioned wire. 1x multi-cell sonic sensor, the multi-cell sonic sensor has integrated work area lighting and an optical set-up aid. The grade and slope bar mounted on the multi-cell sonic sensor must enable the paver to monitor the controls without having to look away from the roadside. The sensor can be used on its own or in series with multiple sensors on a ski. Screed assist when paving materials with a low load-bearing capacity, the hydraulic screed assistant reduces the weight of the screed and at the same time increases the traction of the paver. Preparation for the hydraulic crown adjustment Washing system with tank and hose reel, 15 meter hose, the permanently installed washing system has a detergent tank. Thereby all machine components contaminated with bitumen can be easily cleaned. Tool kit with tool bag and pressure gauge Spray gun, with 2 meter hose Working lights. LED Pave dock assistant, paver with hardtop, signal light communicates all actions of the feed vehicle to the paver operator. 2x bevel iron, 45, serves to shape beveled edges (45), and provides a improved compaction of the outer pavement areas. 2x side plates ski (90), heated, to prevent the mix from sticking. 2x cut-off shoes, 525 mm, to reduce the basic width of the screed, up to 105cm. Including: Part list, operation- and maintenance manuals in German and English Delivery, latest 3 month after contract award to the unloading point at Ramstein Air Base, Facility 2119, 66877 Ramstein, Germany Operators training within 14 days after delivery at delivery place (Ramstein Air Base, Facility 2119), in German and English In accordance to the latest German and European standards and safety regulations for equipment (EU-Directives, CE-Certifications, UVV-Accident Prevention Regulations, VDE-Association of Electrical- and Information Technology, DIN/ISO-Regulations and Environmental-Standards). Warranty: 12 months (standard for equipment) Question: Please confirm, do you accept the Wheeled Paver being manufactured in China? Answer: The heavy wheeled paver needs to be manufactured in Germany so the shop can receive training and be able to do maintenance on the local economy.