This Government Contract opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Helical Compression Spring Manufacturing

Closed

Federal

Submission Closed08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332613

New

DIBBS

Precision Helical Extension Spring ManufacturingThis subcontract involves the manufacture and supply of one helical extension spring (NSN 5360-01-717-6688) for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the component using precision winding equipment in strict accordance with TDP Rev A Gen 1 and Basic Drawing NR 53711 8838876 Revision E. Delivery is required FOB Destination, with packaging adhering to ASTM D3951 and MIL-STD-129 standards. The project mandates strict regulatory adherence, requiring the contractor to maintain CMMC Level 2, ITAR, and EAR compliance. Performance will take place in North Stonington, Connecticut. Interested parties must respond by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 332613.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Helical Compression Springs (NSN 5360016967033)This subcontract involves the manufacture or procurement of 17 helical compression springs conforming to NSN 5360016967033 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to RP001 DLA Packaging Requirements for Procurement for all palletization and utilizes the First Destination Transportation program for delivery coordination. The project is categorized under NAICS code 332613 and is managed by the Department of Defense. Performance of the contract will take place in Phoenix, Arizona, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Helical Compression Springs (NSN 5360010465137)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Valve Springs (NSN 5360011167660)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring FabricationThis subcontract involves the fabrication of one helical compression spring, part number 6501-21PC9 (NSN 5360-00-567-7032), for prime contractors supporting the DLA Weapons Support Land Supply Chain. The manufacturing process must utilize precision winding and coiling equipment, as additive manufacturing is strictly prohibited. The final deliverable must be a single finished spring that is properly marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The project is governed by strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance will take place in Portsmouth, with the contract falling under NAICS code 332613. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Berry Amendment Compliant Spring WireThis subcontract involves the supply of high-grade raw spring wire for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The materials must strictly adhere to the specifications outlined in drawing 19200 8261760 and be delivered directly to the manufacturer. To ensure regulatory compliance, the provider is required to submit Mill Test Reports verifying that all materials meet the standards of the Berry Amendment and the Buy American Act. The performance of this contract is centered in Greensboro, North Carolina, under NAICS code 332613.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Helical Compression Springs (NSN 5360-00-852-1988)This subcontract involves the manufacture of 94 helical compression springs for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the components according to drawing 19200 8261760 using spring winding machinery, ensuring all units are finished, packaged, and labeled for delivery. Performance will take place in Greensboro, North Carolina, under NAICS code 332613. Strict quality and security standards are required for this project, including CMMC Level 2 and ISO 9001:2015 certifications. The contractor must perform cleaning in accordance with MIL-STD-2073-1 and conduct inspections following MIL-STD-1916 or ASQ H1331. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2659

This solicitation, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the procurement of 46 valve springs, identified as NSN 5360011167660 and Admiral Valve LLC part number 002412BF. Designated as a critical application item, the hardware must conform to TDP Rev A Gen 1 and adhere to strict material restrictions, including the prohibition of intentionally added mercury per NAVSEA 5100-003D and compliance with the Buy American Act. The required delivery date is April 20, 2027, with shipping terms set as FOB Origin and the final destination being Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates rigorous quality and packaging standards, requiring cleaning, packaging, and marking in accordance with MIL-STD-1330E and MIL-STD-129, with specific IP042 oxygen clean requirements and special marking code ZZ. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and strict adherence to DLA packaging requirements for procurement. Additionally, the contractor must maintain supply chain traceability documentation and comply with cybersecurity reporting standards under DFARS 252.204-7012.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-27-T-2737

Solicitation SPE7L1-27-T-2737 is a fixed-price request for the procurement of 17 helical compression springs, identified by NSN 5360-01-696-7033 and part number 06.46750-0263. Issued by the DLA Weapons Support Land Supply Chain, the contract is managed under the First Destination Transportation program with a need ship date of May 7, 2027, and an original required delivery date of October 31, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific prohibitions are in place regarding the use of mercury or mercury compounds in packaging and preservation. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contractor must adhere to DFARS cybersecurity standards for safeguarding covered defense information and report any cyber incidents as required.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-9768

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7LX-26-U-9768 for the procurement of 78 flat springs, identified by NSN/Part Number 5360-01-474-9602. This federal requirement falls under NAICS code 332613 and is associated with purchase request 1000239458. The solicitation was posted on August 25, 2026, with a response deadline set for September 9, 2026. Interested parties should direct inquiries to the primary point of contact via the DIBBS portal or the provided email address to ensure compliance with the submission requirements.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-27-T-1545

Solicitation SPE7L1-27-T-1545, issued by the DLA Weapons Support Land Supply Chain, is a request for quotations for six helical compression springs under NSN 5360-01-107-0019. The procurement is categorized under NAICS 332613, with delivery required within 192 days after order. Items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. Quotations must be submitted via the DIBBS system by October 26, 2026. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking per MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination. Quality assurance will follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Offerors must comply with the Buy American Act and Berry Amendment. Notably, the government will not evaluate or award to offers utilizing additive manufacturing, and any proposed alternate parts must be accompanied by a complete data package for evaluation. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-27-T-2751

Solicitation SPE7L1-27-T-2751 is a small business set-aside request for the procurement of 94 helical compression springs, identified by NSN 5360-00-852-1988. The items must be manufactured in accordance with reference drawing 19200 8261760 and delivered FOB Origin to Industries of the Blind Inc. in Greensboro, North Carolina. The required delivery date is April 11, 2027, with a need ship date of February 16, 2027, and a delivery window of 98 days after receipt of order. Quality assurance is stringent, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for MIL-STD-105/ASQ Z1.4. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific requirements for cleaning and drying per MIL-STD-2073-1 and bagging per MIL-DTL-117. The contract incorporates several critical regulatory requirements, including CMMC Level 2 certification, the Buy American Act, and the Berry Amendment. It strictly prohibits the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. Evaluation of offers may include a price preference for HUBZone small business concerns.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires the manufacture of 20 helical compression springs in strict accordance with DLA technical specifications, covering all critical aspects including material selection, heat treatment, load testing, and final inspection to ensure full compliance with military standards. The springs must meet precise engineering and performance criteria to guarantee reliability in defense applications, with all work subject to rigorous quality control procedures at every stage of production. The contract is classified as a subcontract under NAICS code 332613, issued by the Fluid Handling Division of the Department of Defense, with performance required at Hill AFB, Utah, zip code 84056-5734. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026. All participants must adhere to the technical requirements and delivery timelines specified by the agency, with no set-aside provisions applying to this procurement.

General Info

Manufacture 20 helical compression springs per DLA specs for defense use at Hill AFB, Utah, due August 10, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332613 - Spring Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-291G.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPRING, HELICAL, COMPRESSION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 29

subcontract

Response DeadlineAug 10

Deadline has passed

Submission Closed

08/10/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture of 20 helical compression springs per DLA technical specifications, including material selection, heat treatment, load testing, and final inspection to meet military standards.