This Solicitation opportunity from Department Of Defense was posted on April 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
HELMET, BODY ARMOR
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of three helmet and body armor units under solicitation SPE1C1-26-T-1000, with a required delivery within 20 days of award to Silverdale, Washington. Each item is identified by NSN 8470-01-698-7150 and must be individually bar-coded with a 13-digit National Stock Number and a corresponding 12-digit Universal Product Code, both clearly printed and scannable on paper tags made of standard bleached sulfate paper with a 100-pound basis weight and smooth finish. The tags must include a hole and be attached via fastener without damaging the item, and the barcodes must remain fully visible when the item is folded and packaged as specified. Packaging and labeling must comply with MIL-STD-129 and DLA’s Packaging Requirements, overriding ASTM D3951 where applicable, and utilize Type VII pressure-sensitive labels for plastic bags or Type VIII paper tags for bundled or individual items. Inspection is governed by FAR 52.246-2, with acceptance occurring at the destination and no quantity variance allowed. The use of MIL-STD-105E is canceled, and contractors must instead refer to MIL-STD-1916 or ANSI/ASQ Z1.4 for sampling procedures. All government-issued UPCs must appear on shipping cartons, and the delivery must be shipped by the fastest traceable means, explicitly prohibiting parcel post. The contract includes specific federal shipping and point-of-contact details, with the primary point of contact being Michael Rettano of the Department of Defense. The item falls under NAICS code 315990, and covered defense information may apply under RD003. The original required delivery date is April 28, 2026, and the contract is administered under the C and T Supply Chain organization.
General Info
Agency
NAICS
Place of Performance
7000 FINBACK CIRCLE, SILVERDALE, WA, 98315-7000, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
HELMET,BODY ARMOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE
FOLLOWING:
LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG
FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE
STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A
SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS
SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,
CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL
BE A 13 DIGIT
NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT
CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC"
MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A
MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY
VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE
LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.
NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED
UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON
WHICH THE NSN APPEARS.
THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:
BAR CODE OMITTED OR NOT READABLE BY SCANNER
HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE
NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM
NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG USE TYPE VII
(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.
IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE
TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2
STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods
SPE1C1-26-T-1000
SECTION B
for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 532076028.)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CHASE TACTICAL, LLC 78JG4 P/N CT-BUMP1-BK
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016497204 0001 EA 3.000
NSN/MATERIAL:8470016987150
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N68438
NAVIMFAC PACNORWEST
7000 FINBACK CIRCLE
SILVERDALE WA 98315-7000
SPE1C1-26-T-1000
SECTION B
PR: 7016497204 PRLI: 0001 CONT’D
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N68438
RECEIVING OFFICER
BUILDING 7000 DOOR 12
7000 FINBACK CIRCLE
SILVERDALE WA 98315
US
M/F: (TCN) N6911761136944
RDD:
PROJ: XJ5 TP 2
SUPP ADD: N68438 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 04
DIC: A0A DIST: 9B ADV: FC: J3
Need Ship Date:00/00/0000 Original Required Delivery Date:04/28/2026
SPE1C1-26-T-1000 NSN/Part Number: 8470-01-698-7150 Quantity: 3 EA Purchase Request: 7016497204QTY: 3 Delivery: 20 days ADO
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS