This Government Contract opportunity from Department Of Defense was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

High-Capacity Thrust Stand Design and Fabrication

Closed

Federal

Submission Closed07/03/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E5-27-T-0323

Solicitation SPE8E5-27-T-0323 is a request for quotations from the DLA Troop Support Construction and Equipment office for the procurement of 15 units of Torch Assembly Handles, identified by NSN 3433-01-323-2131 and material number 3433013232131. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 28, 2027, with a need ship date of April 26, 2027, and a delivery timeline of 167 days after order. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special restrictions are in place regarding the use of mercury and hexavalent chromium, and hazardous materials must be labeled according to the Hazard Communication Standard and IP025. Payment will be processed electronically via the Wide Area WorkFlow system. The award process may utilize the HUBZone price evaluation preference, and offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity requirements, including NIST SP 800-171 and DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0309

Solicitation SPE8E9-27-T-0309 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of 34 spools of welding electrodes, specifically type MIL-316L, Class 1B, with a diameter of 0.035 inches. Each spool is specified as weighing 2 pounds. This is a Qualified Products List item, meaning the manufacturer must be QPL approved at the time of the contract award. The items must adhere to basic specification MIL-E-19933E(1) Revision E and are subject to destination inspection and acceptance. The delivery is required by May 22, 2027, with a need ship date of April 26, 2027, and is shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging requirements are stringent, requiring the unit container to be a hermetically sealed can in accordance with MIL-STD-2073-1E and ASTM-D-3951-98, with palletization following RP001 and MIL-STD-147. Marking must comply with MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on the use of mercury and hexavalent chromium. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0368

Solicitation SPE8E5-27-T-0368 is issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of tin alloy solder, specifically part number 95551 from J. W. Harris Co. Inc. The requirement consists of one unit under NSN 3439016978876, with a required delivery date of October 23, 2026, and a delivery lead time of 20 days after receipt of order. Shipping is designated as FOB Origin, with the destination and acceptance point located at the Carl Pipkin USAR Center in Beaumont, Texas. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for packaging, marking, and labeling per MIL-STD-129 and RP001. Hazardous materials must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard, while non-hazardous materials follow ASTM D3951. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS regulations regarding the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the prohibition of covered defense telecommunications equipment. Award evaluation may include HUBZone price preferences and other socioeconomic set-asides under NAICS code 333992.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0393

Solicitation SPE8E6-27-T-0393 is a fixed-price procurement issued by the DLA Troop Support Construction and Equipment office for the supply of welding rods, identified by NSN 3439010549640. The requirement consists of a single line item for a quantity of 19 units. Delivery is required within 167 days after the order is placed, with an original required delivery date of March 5, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Due to the nature of the materials, compliance with IP025 and DFARS 252.223-7001 for the handling and labeling of hazardous materials is mandatory. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This solicitation includes specific regulatory requirements such as the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards, and it offers a price evaluation preference for HUBZone small business concerns.

POSTED

DEADLINE

TORCH SET, SELF IGNITIN

Solicitation # SPE8E5-27-T-0317

Solicitation SPE8E5-27-T-0317 is a procurement request by the Defense Logistics Agency (DLA) for 62 units of self-igniting propane torch sets, identified by NSN 3433-01-161-4998. The required equipment must feature an instant flame ignitor capable of over 30,000 uses and produce a flame of 2,000 degrees Fahrenheit, designed for use with disposable propane bottles, which are not included in the set. The procurement is managed by DLA Distribution San Joaquin, with a required delivery date of February 8, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations were due by November 9, 2026.

POSTED

DEADLINE

HOLDER, ELECTRODE, WELDI

Solicitation # SPE8E6-27-T-0454

This fixed-price solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment (Class IV), is for the procurement of two welding electrode holders under NSN 3439211098141. The contract requires delivery to the Rotational Force Korea at Camp Casey in Dongducheon, South Korea, with an original required delivery date of October 26, 2026, and a delivery lead time of 20 days after the order. The procurement is governed by NAICS code 333992 and includes specific requirements for the Buy American Act and the Berry Amendment for materials above the micro-purchase threshold. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with all shipments delivered FOB Origin. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material identification, and the prohibition of certain telecommunications equipment. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0314

Solicitation SPE8E5-27-T-0314 is a request for quotations for the procurement of 81 welding torch tips, identified by NSN 3433-00-628-7680. The required items must include the mixer and nut and be fully compatible with Victor 300 series welding torches. Acceptable part numbers include Victor Equipment Co 0323-0111 and UniWeld Products Type 4 Size 00. Delivery is required within 167 days after order, with an original required delivery date of April 20, 2027, shipping to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM-D-3951-98, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. The procurement falls under NAICS code 333992 and is managed by DLA Troop Support, Construction and Equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0312

Solicitation SPE8E5-27-T-0312 is a small business set-aside procurement issued by the Defense Logistics Agency for 67 units of aluminum alloy filler welding rods. The required material must conform to AWS A5.10/A5.10M-17 and Federal Specification QQ-R-566, specifically 1/16 inch diameter and 36 inches in length. Delivery is required within 50 days after order, with a need ship date of October 31, 2026, and a final delivery destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Suppliers must provide Safety Data Sheets and compliant labeling per 29 CFR 1910.1200 for any hazardous materials. Key regulatory requirements include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and a prohibition on the intentional addition of mercury. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Quotations are due by November 9, 2026.

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7432

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0298

Solicitation SPE8E9-27-T-0298 is a small business set-aside request for quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 29 light-duty, hand-held oxyacetylene welding torches, identified by NSN 3433002559332. The items must meet the requirements of CID A-A-59350 and are subject to strict material restrictions, including a prohibition on the intentional addition of mercury or mercury-containing compounds. The contract specifies a delivery lead time of 20 days with a need ship date of October 28, 2026, and a required delivery date of December 3, 2026. Delivery is FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The procurement includes rigorous packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. All wooden pallets must be heat-treated and IPPC stamped to ensure they are pest-free for overseas shipment, as failure to comply will result in the rejection of materials. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Certified HUBZone small business concerns may receive a price evaluation preference under FAR 52.219-4.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0367

This solicitation, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment office, is for the procurement of five cartons of welding rods under NSN 3439-00-262-4285. The specified material consists of rods measuring 3/16 inch in diameter and 39 inches in length, with each carton weighing 2 lbs. Delivery is required within 10 days after receipt of the order, with the place of performance and delivery located at Fort Riley, Kansas. The contract is established as FOB Origin and requires destination inspection and acceptance. The procurement is subject to strict technical and quality requirements, including DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Specific attention is required for magnesium alloy rods containing radioactive thorium, which must bear appropriate radiation warning labels. Compliance with the Buy American Act and the Berry Amendment is mandatory for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and reporting, as well as adherence to DFARS regulations regarding safeguarding covered defense information and cyber incident reporting.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0455

Solicitation SPE8E6-27-T-0455 is a procurement request by the Defense Logistics Agency for welding rods under NSN 3439-00-008-5067. The requirement is for four units, with each unit consisting of 10 pounds of rods measuring 0.045 inches in diameter and 36 inches in length. The items must be delivered to Fort Riley, Kansas, with a required delivery date of October 23, 2026, and a delivery window of 10 days after receipt of order. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E, and follow DLA packaging requirements for procurement (RP001). All quotes must be submitted through the DLA Internet Bid Board System (DIBBS). The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Invoicing and payment must be processed electronically via the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 12 days

AI Contract Overview

A high-capacity thrust stand is being procured for aerospace testing applications, requiring custom design and fabrication to handle extreme thrust and static loads with high precision. The system must incorporate flexure-based components to ensure load isolation and structural stability, alongside a modular mounting framework that allows for adaptable integration with various engine configurations. Precise engine alignment capabilities are essential to maintain test accuracy and repeatability under operational conditions. The contract is issued as a subcontract under the NAICS code 333992, with performance centered in Dayton, Ohio, at a facility associated with the Department of Defense’s FA8601 Aflcmc Pzio office. Responses are due by July 3, 2026, with no set-aside designation specified, and the solicitation was posted on June 25, 2026.

General Info

Procure high-capacity thrust stand with flexure components for aerospace testing in Dayton, Ohio, due July 3, 2026.

Agency

Department Of Defense → FA8601 Aflcmc Pzio

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

Dayton, OH, 45433, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8601F112_ENGINE_AND_STAND.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Williams F112 engine and Thrust Stand

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 25

subcontract

Response DeadlineJul 3

Deadline has passed

Submission Closed

07/03/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8601 Aflcmc Pzio

Office AddressN/A

ContactsNo contact information available

Full Description

Design and fabrication of a custom thrust stand capable of withstanding high thrust and static loads, featuring flexures, modular mounting, and precise engine alignment for aerospace testing.