This Government Contract opportunity from Georgia was posted on January 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

High-Fidelity Simulation Manikins Supply

Closed

State & Local

Submission Closed02/06/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339112

New

DIBBS

HANDLE, SUCTION, SURGICAThe contract specifies the procurement of a single-use surgical suction handle designed as a nonconductive, shatterproof, transparent plastic device with a smooth, nonclogging grooved suction tip, intended for fluid withdrawal in surgical settings as an alternative to a suction catheter. Each unit is individually sealed in a peel-open package, with a unit of issue of one package containing fifty units. The item is regulated by the FDA and must comply with DLA packaging and medical marking standards, specifically Medical Marking Standard No. 1, which replaces references to MIL-STD-129. Packaging must be commercial-grade, ensuring protection from damage, and shipping containers must enable safe, cost-effective delivery to the destination point. The contract identifies approved manufacturers including Baxter Healthcare Corp, Cardinal Health 200, LLC, and Medline Industries, LP, each with designated part numbers, and requires buyers to submit referrals through EBS for FDA-regulated medical device verification. The item is identified by NSN 6515-01-176-7576 and is designated as a Fleet Prime Vendor item. The solicitation number is SPE2DS-26-T-236Y, issued under the Department of Defense’s Medical Supply Chain, with a response deadline of July 21, 2026, and a required delivery within 20 days of award. Delivery is FOB destination with zero variance allowed in quantity, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E specifications. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. All units must be properly marked and comply with applicable defense information controls, and the contract is managed through the DLA’s eProcurement system under the NAICS code 339112 for surgical medical device manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

WRENCH, OXYGENThe contract pertains to the procurement of one oxygen wrench, designated as a D cylinder, under NSN 6515-01-516-8732, with a single unit requirement and a total price of $1.00. Delivery is mandated within 20 days to two distinct military locations: one at USNS APALACHICOLA in Loxley, Alabama, and another at the Ramstein Air Base in Germany, with FOB destination terms and zero variance allowed in quantity. All items must comply with stringent packaging and marking standards, including the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be packaged in accordance with ASTM D3951, though DLA’s Master List of Technical and Quality Requirements takes precedence. The product is FDA-regulated, and bidders must clearly identify the manufacturer and part number, specifying either CareFusion or Owens & Minor as the supplier. Shipping must occur via traceable freight methods—parcel post is explicitly prohibited—and palletization must adhere to DLA’s packaging requirements. All markings, handling, and storage must align with commercial packaging norms suitable for safe transport by common carriers at the lowest cost. The solicitation number is SPE2DS-26-T-236Z, with a response deadline of July 21, 2026, and the required delivery date is July 17, 2026. Government use codes and transportation protocols are clearly defined, and the contracting officer is directed to submit a referral for product confirmation through EBS.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

HOSE ASSEMBLY, BLOOD PRThe contract specifies the procurement of a single hose assembly for a blood pressure monitor, measuring 120 inches, with the NSN 6515-01-436-5080. The item must be delivered within five days of award and is part of a federal acquisition under solicitation SPE2DS-26-T-235W. All units must be packaged in sealed commercial containers designed to prevent damage or breakage, with shipping containers meeting commercial standards for safe delivery at the lowest carrier rate to the designated point of performance at Fort Bragg, North Carolina. Labeling must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly state the source and part number being supplied. Technical and quality requirements referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA requirements, and non-accepted supplies must have all government identification removed. The contracting office is under the Department of Defense’s Medical Supply Chain, with Zaylin Robinson as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MASK, AIRWAY, LARYNGEThe contract specifies the procurement of a disposable laryngeal airway mask, identified by part number 128010 and NSN 6515-01-543-3537, supplied by LMA NORTH AMERICA, INC. DBA 1GXY2. Each unit must be packaged in a sealed container that protects against damage and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest cost to the destination. Packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each container must be clearly marked with the lot number and date of manufacture prefixed by “MFD”. The product has a mandated 30-month shelf life, with no more than five months allowed to have elapsed from the date of manufacture to delivery. The item is regulated by the FDA, requiring referral through EBS for confirmation before procurement. The unit of issue is PG (1 PG equals 10 units), and delivery is required within 20 days FOB destination with zero variance allowed in quantity. Packaging must conform to MIL-STD-2073-1E, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements under applicable revision dates tied to the solicitation timeline. The contract was issued under solicitation SPE2DS-26-T-236R with a response deadline in July 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

HARNESS, HEAD, ANESTHThe contract pertains to the procurement of a head anesthesia harness, identified by part number LF-143-A and NSN 6515-01-529-6585, supplied by Anesthesia Associates Inc. with CAGE code 63616. The item is regulated by the FDA, and buyers must submit a referral through EBS to confirm product eligibility, including bidder and manufacturer details. The contract requires strict adherence to Medical Marking Standard No. 1 for labeling and packaging, superseding MIL-STD-129, and mandates that each unit be sealed in a protective container, with all shipments packed in commercial exterior containers suitable for safe transit via common carrier at the lowest possible cost. Packaging must comply with MIL-STD-2073-1E, and the delivery is FOB destination, with inspection and acceptance also occurring at the delivery point. The requirement is for ten units, with zero variance allowed, and delivery must be completed within twenty days. The solicitation number is SPE2DS-26-T-237A, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, with a response deadline of July 21, 2026, and the point of contact is Anh Lam. The unit of issue is each, consistent with DLA’s authorized standards, and applicable technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. Coverage under Covered Defense Information provisions may apply.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 4 hours ago

DEADLINE

in 6 days

General Info

Agency

Georgia → Columbus Technical CollegeView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 21

subcontract

Response DeadlineFeb 6

Deadline has passed

Submission Closed

02/06/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Columbus Technical College

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → Columbus Technical College

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and delivery of LifeCast Body Simulation Manikins with MeLiSA Service for trauma, pediatric, and general patient simulation training.