Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

High Power Amplifier (HPA) Supply

Active

Federal

Response Deadline08/06/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of High Power Amplifiers designated as Part # SYS0218M07S, specifically engineered for high-output signal transmission in naval applications. These amplifiers must meet stringent requirements for thermal stability, power efficiency, and electromagnetic compatibility to ensure reliable operation in demanding maritime environments. The equipment is critical for sustaining robust communication and signal integrity under extreme conditions, and the supplier must demonstrate proven capability in meeting these technical specifications without compromise. Issued by Nuwc Division Newport under the Department of Defense, this subcontract opportunity was posted on August 4, 2026, with a response deadline of August 6, 2026. The North American Industry Classification System code 334511 identifies the scope as related to electromagnetic and electronic component manufacturing. The performance location and point of contact details are not specified, but the contract is accessible through the SAM.gov portal, indicating it follows federal contracting protocols. Bidders must be prepared to adhere to defense-grade quality standards and deliver units that are fully compliant with naval operational demands.

General Info

Supply of naval-grade High Power Amplifiers Part #SYS0218M07S meeting DoD technical and quality standards.

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

RI

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 06:00:00 PM UTCin about 18 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nuwc Division Newport

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nuwc Division Newport

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of High Power Amplifiers (Part # SYS0218M07S) for high-output signal transmission, requiring thermal stability, power efficiency, and electromagnetic compatibility for naval use.

Similar Contracts

Same NAICS industry code

SLOT FILLER MODULE

Solicitation # SPE8E9-26-T-3350

The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

DETECTOR, CARBON DIOXID

Solicitation # SPE2DS-26-T-310Q

The contract specifies the procurement of two carbon dioxide gas detectors, identified by NSN 6515-01-588-7389, for delivery to Fort Wainwright, Alaska, with a strict five-day absolute delivery obligation. Each unit must be individually sealed in a protective container to prevent damage or breakage and packed in commercial exterior shipping containers suitable for safe transport via common carrier at the lowest possible cost, with export packaging required if necessary. All packaging and marking must comply fully with Medical Marking Standard No. 1, replacing any reference to MIL-STD-129, and bidders are required to clearly state the source and part number being supplied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Brooke Webb as the primary point of contact. RD003 indicates potential covered defense information, and all supplies must adhere to DLA packaging requirements and the rule requiring removal of government identification from non-accepted items.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

CONVERTER, ANALOG TO DI

Solicitation # SPE8EN-26-T-2779

This contract specifies the procurement of an analog-to-digital converter with NSN 7050-01-582-1116 and part number 70001777 from DIGI INTERNATIONAL INC., under solicitation SPE8EN-26-T-2779. The order is for ten units to be delivered FOB origin within 45 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA’s RP001 packaging requirements, with DLA’s Master List of Technical and Quality Requirements superseding any conflicting specifications. The item is exempt from Class I ozone-depleting substances and严禁 the intentional introduction of mercury or mercury-containing compounds, except for specific functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or Navy-specified reagents; any portable devices containing mercury must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with the required ship date set for October 2, 2026, and the original delivery deadline set for January 23, 2027. The unit of issue is each, priced at $10.00 per unit for a total of $100.00. The contract incorporates all relevant DLA technical and quality requirements referenced by R or I numbers published online, and the version in effect at the solicitation or award date controls. Transportation details follow DLAD Proc Notes C19 and C20.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

CUFF, SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-311C

The contract specifies the procurement of a pediatric non-invasive blood pressure cuff with specific bladder dimensions: 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. The item is identified by NSN 6515-01-593-8773 and is a replacement for earlier part numbers 6515-01-582-4060 and 6515-01-582-4072. The unit of issue is each (EA), with a total quantity of four units required, delivered FOB destination within 20 days of the contract award. The product must meet strict packaging and marking standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging must comply with ASTM D3951 and DLA’s Packaging Requirements for Procurement (RP001). All items must be sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe delivery at the lowest carrier rate. Labeling, palletization, and handling must adhere to DLA requirements, and parcel post is explicitly prohibited; shipment must be traceable. The delivery point is a Department of Defense facility in San Antonio, Texas, with the government specifying that no government identification may be removed from non-accepted supplies. The contract references the DLA Master List of Technical and Quality Requirements as the governing standard, with precedence over any other specifications. The supplier, Philips North America LLC, is identified by part number 40401B, and the solicitation number is SPE2DS-26-T-311C with a required delivery date of August 6, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

RETAINER, TUBE, TRACHEAL

Solicitation # SPE2DS-26-T-310Y

The contract specifies the procurement of a single unit of a tracheal tube retainer compatible with the Save Ventilator identified by NSN 6515-01-571-1689, manufactured by Laerdal and listed under NSN 6515-01-588-5834. The item is designated for use in medical acquisitions and must be packaged in commercial containment that ensures protection against damage or breakage, with all units sealed in appropriate individual containers and grouped in exterior shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point in Fort Wainwright, Alaska. All packaging and marking must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item is subject to technical and quality requirements outlined in the DLA Master List, and the applicable revision of that list is determined by the solicitation or award date. The solicitation, issued under SPE2DS-26-T-310Y, requires responses by August 11, 2026, with a five-day delivery deadline after award. The contracting office is the Department of Defense’s Medical Supply Chain MD Surg FSF, and primary point of contact is James Burke.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2808

This contract is for the procurement of a computer subassembly under solicitation SPE8EN-26-T-2808, with a total quantity of seven units to be delivered FOB origin within 17 days of award. The item is identified by NSN 7050015108447 and corresponds to specific part numbers from JERED LLC and ROCKWELL AUTOMATION, INC., each designated as a critical application item. Zero tolerance is permitted for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special markings required. Delivery is directed to DLA Dist San Joaquin in Tracy, CA, with a required ship date of September 4, 2026, and an original delivery deadline of December 13, 2026. The contract prohibits the intentional addition of mercury or mercury-containing compounds in or on the supplies, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date controls compliance. No approved technical data package is currently available from DLA Troop Support for this NSN, and requests to their team are to be avoided. The unit of issue is each, priced at $7.00 per unit, with a total contract value of $49.00. All transportation logistics are governed by DLA procedural notes, and the solicitation was issued under NAICS code 334511 with a response deadline of August 17, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

HARNESS, ORONASAL MASK

Solicitation # SPE2DS-26-T-310N

The contract pertains to the procurement of an oronasal mask harness, identified by NSN 6515016079935, under solicitation SPE2DS-26-T-310N, with a total requirement of five units—one unit under CLIN 0001 and four units under CLIN 0002. Delivery is required within five days of contract award, with FOB destination terms, and no quantity variance is permitted. All units must be delivered to two specified military locations: Fort Wainwright, Alaska, and Fort Campbell, Kentucky. The item is classified as a medical device regulated by the FDA, requiring referral through EBS to confirm compliance prior to award. Packaging and marking must fully comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must ensure protection against damage through sealed unit containers and suitable commercial shipping containers. Packaging must adhere to ASTM D3951 and DLA’s RP001 packaging requirements, with palletization following specified standards and traceable shipping methods only—parcel post is prohibited. All packaging and labeling must reflect government-specific identifiers as outlined in the procurement documentation, and the supplier must provide a commercial-grade container capable of safe transit at the lowest cost. Final inspection and acceptance occur at the delivery point, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation date.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-311H

The contract specifies the procurement of a supraglottic airway device, size 4, designed for adult medium use, with each box containing six units. The item has a mandatory shelf life of 36 months from the manufacturer’s date, and no more than five months may have elapsed between the manufacturer’s date and the delivery date to the government. Labeling must comply with the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, contract number, and lot number. Technical and quality requirements referenced under RS001 and RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must conform to DLA standards under RP001, and any non-accepted supplies must have government identification removed as required by RQ011. Bidders are required to identify the source and part number being supplied. The item is identified by NSN 6515-01-618-8278 with a total order of two boxes. Delivery is due within 20 days after award, under solicitation SPE2DS-26-T-311H, issued by the Department of Defense’s Medical Supply Chain for Surgical and Financial Services.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBL

Solicitation # SPE8E9-26-T-3353

This contract pertains to the procurement of a computer subassembly under solicitation SPE8E9-26-T-3353, with a delivery requirement of 51 days and a firm fixed price of $16.00 per unit for a total of 16 units, resulting in a total contract value of $256.00. The item is identified by NSN 7050-01-511-4904 and must be delivered FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and marking codes. Palletization must adhere to DLA packaging standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for designated exceptions such as batteries, fluorescent lights, sensors, and instruments specified by NAVSEA, which must include secondary containment and shockproof design. The contract also mandates compliance with DLA’s Master List of Technical and Quality Requirements, incorporates Covered Defense Information protocols, and requires the contractor to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity readiness. The solicitation is governed by federal acquisition regulations, issued by the Department of Defense under the NAICS code 334511, with performance located in Tracy, California, and primary point of contact designated as Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2778

The contract pertains to the procurement of two units of a computer subassembly identified by NSN 7050-01-548-4354, with a delivery requirement of 167 days after award. The solicitation number is SPE8EN-26-T-2778, issued on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 334511 and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office, with performance localized to Tracy, California, 95304-5000. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment later supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and covered defense information applies to this procurement. Point of contact is Jennifer Esworthy, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

COMPUTER SUBASSEMBLY

Solicitation # SPE8EN-26-T-2829

This contract, issued under solicitation SPE8EN-26-T-2829, specifies the procurement of six units of a computer subassembly identified by NSN 7050-01-565-3832, with a delivery requirement of 167 days from the award date and FOB origin terms. The item must be packaged in compliance with ASTM D3951, with all packaging and labeling strictly following MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging requirements, which take precedence over any other standards. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contractor is required to comply with CMMC Level 2 self-assessment for cybersecurity and must handle Covered Defense Information according to RD002 policies. No technical data package is currently available from DLA Troop Support for this NSN, and requests for such data are not to be submitted. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 1, 2027, and an original required delivery date of May 4, 2027. The unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is controlled by the solicitation issue date.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

Low Noise Amplifier (LNA) SupplyNuwc Division Newport is seeking qualified suppliers to provide Low Noise Amplifiers with part number SYS0218M07S for use in undersea signal reception systems, where high signal integrity and operational reliability under extreme maritime conditions are critical. These amplifiers must meet stringent performance standards to ensure sensitive electronic systems function effectively in deep-sea environments characterized by high pressure, corrosion, temperature fluctuations, and electromagnetic interference. The opportunity is posted as a subcontract with a NAICS code of 334511, indicating focus on electronic component manufacturing, and responses are due by August 6, 2026, at 6:00 PM Eastern Time. The contract requires adherence to rigorous quality and environmental robustness specifications, and all submissions must demonstrate proven capability in supplying components for defense-grade undersea applications. Interested parties must respond through the official SAM.gov portal before the deadline to be considered.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 18 hours

6-Channel Downconverter SupplyThe contract calls for the supply of six-channel downconverters identified by part number SYS0218M07S, specifically designed for integration into naval undersea warfare systems. These units must meet stringent performance standards including signal integrity, preservation of noise characteristics, and resilience under harsh environmental conditions typical of marine and submerged operational environments. The components are critical to the functionality of acoustic and electronic sensing systems aboard naval platforms, requiring precision engineering and rigorous quality control to ensure reliability in high-stakes tactical scenarios. The solicitation is structured as a subcontract under NAICS code 334511, indicating a focus on communications equipment manufacturing, and is issued by the Naval Undersea Warfare Center Division Newport under the Department of Defense. Responses are due by August 6, 2026, at 6:00 PM, with the opportunity posted on August 4, 2026. There is no set-aside designation specified, and the place of performance and point of contact details are not provided, but the equipment is intended for use in Navy undersea operations, implying strict compliance with military specifications and potential requirements for testing, certification, or delivery to secure facilities.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 18 hours

Solicitation # N6660426Q0188

This solicitation is a sole-source procurement for one Breakout Box, Part #: 114-119-001, issued exclusively to SEACORP due to its proprietary design, which would require extensive and unacceptable redesign if sourced from any other supplier. The requirement is under NAICS code 332439 with no small business set-aside, and the Government intends to award a Firm Fixed Price purchase order with delivery F.O.B. Destination to Newport, RI, no later than nine months after order receipt. All shipping charges must be included in the quoted unit price. Compliance with NIST SP 800-171 and CMMC Level 2 (Self) is mandatory, and offerors must have an active, current assessment posted in the Supplier Performance Risk System (SPRS) to be eligible for award. The contractor must maintain this status throughout the contract period and annually affirm continuous compliance, including flowdown requirements to subcontractors handling controlled information. The contract includes extensive FAR and DFARS clauses governing cybersecurity, subcontracting, labor, procurement integrity, and item identification, with specific emphasis on safeguarding covered defense information and enforcing CMMC Level 2 requirements. The contractor must provide a Unique Item Identifier for the delivered item due to its acquisition cost exceeding $5,000 and use Electronic Payment via WAWF. Quotes must be submitted via email by August 11, 2026, at 1400 Eastern Time and must include the CAGE code, Unique Entity ID, Point of Contact information, proof of U.S.-based shipping, and confirmation of SAM registration. Late submissions will not be considered, and past performance data in SPRS may impact evaluation. The Government will not issue a written solicitation, and this notice constitutes the sole formal request for quotation.

Other Metal Container Manufacturing

POSTED

DEADLINE

All Up Round plus Canister Simulator (AURCS)

Solicitation # 45-0268

The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Sole Source, Narda Holdings Downconverters and Amplifiers

Solicitation # N6660426Q0195

The contract solicitation titled Sole Source, Narda Holdings Downconverters and Amplifiers under solicitation number N6660426Q0195 is issued by the Naval Undersea Warfare Center Division Newport within the Department of Defense. It is categorized as a combined solicitation with no set-aside applied, targeting the procurement of specialized downconverters and amplifiers exclusively from Narda Holdings, indicating a sole source acquisition. The opportunity was posted on August 4, 2026, with a firm response deadline of August 6, 2026, at 6:00 PM Eastern Time, leaving a narrow window for submissions. The North American Industry Classification System code 334419 identifies the procurement as related to other electronic component manufacturing. Performance location details are unspecified, but the contracting office is located at Newport, Rhode Island, 02841-1703. Primary point of contact for inquiries is Elizabeth Peckham, reachable via phone at 401-832-8962 or email at elizabeth.a.peckham2.civ@us.navy.mil. All detailed requirements are referenced in the attached Request for Quotation, and further information can be accessed through the designated SAM.gov link.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 18 hours

Confined Space Rescue Training

Solicitation # N66604-26-Q-0342

The contract seeks a small business to provide confined space and rope rescue training services to the Naval Station Newport Fire Department under a firm-fixed-price purchase order, with a period of performance extending from the date of award through September 30, 2026. The requirement is a total small business set-aside under NAICS code 611430 with a $15 million size standard, and it is a new procurement with no incumbent. The contractor must deliver 32 hours of rope rescue training and 48 hours of confined space search and rescue training, both aligned with NFPA 1006 and NFPA 2500 current editions, at the technician level. Training must be conducted for up to sixteen students per class at the Newport, Rhode Island location, with the government providing the classroom and practical exercise space while the contractor furnishes all instructors, digital training materials, and equipment. The contractor is responsible for arranging ProBoard certification for confined space rescue through a third-party accredited agency; the training provider itself does not need to be ProBoard accredited. Re-testing is not included in the firm-fixed price, and the rope and confined space courses may be delivered consecutively. Instructors must possess documented technician-level certifications and operational experience in fields such as fire and EMS, HazMat/WMD, rope access, law enforcement, and bomb technician functions, with collective team qualifications acceptable if each instructor covers the areas they teach. The solicitation requires active SAM registration, a valid UEI and CAGE code, and submission of instructor resumes and certifications. Pricing, past performance, and instructor qualifications serve as pass/fail gates under a lowest price, technically acceptable evaluation approach. The government has confirmed no controlled unclassified information will be involved, eliminating the need for NIST SP 800-171 compliance or security clearances, and the DD254 reference has been removed from the statement of work. Invoicing may occur per completed CLIN via WAWF. The response deadline was extended to July 29, 2026, and the solicitation remains open for submissions under the revised terms.

Professional and Management Development Training

POSTED

DEADLINE

in about 6 hours

Subsea Hydraulic Pressure Unit

Solicitation # N66604-26-Q-0421

The Naval Undersea Warfare Center Division, Newport is soliciting a Firm Fixed Price purchase order for one subsea hydraulic pressure unit under solicitation N66604-26-Q-0421, with responses due by June 26, 2026, at 1400 EST. This procurement is a total small business set-aside under NAICS code 333996, with a size standard of 1,250 employees, and is open only to small businesses registered in the System for Award Management with a valid CAGE code and Unique Entity Identifier. The unit must meet stringent technical requirements including operation at subsea depths up to 200 meters, full functionality after one year of submersion in seawater while non-operational, delivery of hydraulic oil at 2000 PSI with a minimum flow rate of 1.0 GPM, and operation on a DC voltage bus between 275–410VDC with a maximum power draw of 3 kW. It must function in water temperatures ranging from 25°F to 86°F and include a standard control interface, with Ethernet preferred. The item must be new, manufactured and shipped from within the United States, and delivered to Newport, RI by November 30, 2026, under F.O.B. Destination terms. Offerors must provide a Unique Item Identifier (UID) for the unit, as its Government acquisition cost exceeds $5,000, in accordance with DFARS 252.211-7003. Technical acceptability is contingent upon meeting all performance specifications and delivering on schedule. Proposals must also include proof of CMMC Level 2 certification issued by SPRS at the time of submission, as this is a mandatory pass/fail requirement. The government will award to the lowest priced technically acceptable offeror. Payment preferences include Government Purchase Card if no surcharge applies; otherwise, payment will be processed electronically via Wide Area Workflow in compliance with DFARS 252.232-7003 and 252.232-7006. All submissions must be sent via email and include the contractor’s point of contact, CAGE code, UEI, price, and delivery terms. Failure to meet any mandatory requirement—including CMMC certification, UID labeling, U.S. origin, or new condition—may result in termination for cause and liability for excess

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Advance Notice: N6660426R3107 Code 45 Structural Modeling, Acoustics, Shock, and Hydrodynamics (SMASH) services

Solicitation # N6660426R3107

The U.S. Navy’s Naval Undersea Warfare Center Division Newport is issuing an advance notice for a potential solicitation under contract number N6660426R3107 to procure Structural Modeling, Acoustics, Shock, and Hydrodynamics services, commonly referred to as SMASH. This effort is intended to support technical and analytical services related to the structural integrity, acoustic behavior, shock response, and hydrodynamic performance of naval systems, with work to be performed at the organization’s facility in Newport, Rhode Island, zip code 02841. The North American Industry Classification System code for this requirement is 541330, identifying it as an engineering services procurement. The solicitation is classified as a presolicitation, indicating that the government is currently gathering market interest and industry capabilities ahead of issuing a formal request for proposals. No set-aside type has been designated, meaning the opportunity is open to all qualifying contractors. Primary point of contact for inquiries is Chelsea Isherwood, reachable via email at chelsea.a.isherwood.civ@us.navy.mil or by phone at 4018324381. The official announcement was posted on July 31, 2026, and further details will be made available through the SAM.gov portal linked in the notice.

Engineering Services

POSTED

DEADLINE

Electrical Hull Fitting (EHF) Repairs

Solicitation # N66604-26-Q-0239

The solicitation N66604-26-Q-0239 seeks Electrical Hull Fitting (EHF) repairs for Navy vessels under a Firm Fixed Price contract, with a response deadline of 7 August 2026. The work involves supplying critical shipboard components designated as Special Emphasis Level I, requiring stringent quality controls, 100% traceability, and compliance with MIL-I-45208 and ISO 9001:2015 standards. Deliverables include certified materials with legible markings per MIL-STD-792, certificates of compliance, torque records, material certifications, and electronic as-built drawings. Inspection occurs at the contractor’s facility prior to shipment, with final acceptance at the destination—NUWC Division Newport, Rhode Island—after installation and testing. All supplies must be packaged and marked in accordance with ASTM D-3951-18 and MIL-STD-129R, including 2D Data Matrix barcoding per MIL-STD-130 Rev N CH-1, and master packing lists for multi-container shipments. Pricing is submitted as a Firm Fixed Price with no estimated value provided; award will be made on a Lowest Price Technically Acceptable basis, where technical acceptability is determined by compliance with specifications, ISO registration, proof of First Article Testing, and favorable past performance in SPRS and PDREP. Cybersecurity requirements include CMMC Level 2 certification for systems handling Controlled Unclassified Information, adherence to NIST SP 800-171, and flow-down of security obligations to subcontractors. Operational Security programs, electronic spillage cost responsibility, and strict reporting protocols for CUI are mandatory. Offerors must maintain a valid Unique Entity ID and CAGE code, disclose socioeconomic status, and comply with representations regarding foreign entities, defense telecommunications, and security prohibitions. Invoicing must be processed exclusively through Wide Area WorkFlow, and all deliveries are F.O.B. Destination to Newport, RI. The contract includes base and option line items for EHF repairs and data delivery, with no contract value specified pending offeror pricing submission.

Electronic Connector Manufacturing

POSTED

DEADLINE

Construction - NUWCDIVNPT - Consolidated Secure Facility

Solicitation # N6660426R0163

The Naval Undersea Warfare Center Division Newport is soliciting proposals for the design and construction of the B162 Consolidated Secure Facility, a high-security project requiring full compliance with stringent federal and defense standards. The requirement is a 100% Small Business Set-Aside under NAICS code 236220, with a size standard of $45 million, and small businesses must perform at least 50% of the work. Proposals must be submitted electronically by the revised deadline of July 31, 2026, with formal response due by August 12, 2026. The contract is structured as a Firm Fixed Price arrangement, covering a single job and one lot for construction submittals, with performance to begin within 10 days of award and complete within 365 days. The facility will be constructed at Naval Station Newport, Rhode Island, and must meet rigorous security, acoustic, and physical standards to achieve Sensitive Compartmented Information Facility (SCIF) and Special Access Program Facility (SAPF) accreditation. Offerors must provide detailed technical narratives on SCIF/SAPF design, site security during construction, a Construction Security Plan, preliminary conceptual drawings, and a project schedule, all organized into specified volumes with strict formatting, page limits, and PDF searchability requirements. Contractors must be registered in SAM.gov and possess the necessary roles to request controlled attachments, including the Conceptual Layout Plan, Area Site Plan, and Site Utility Plan, which are critical to proposal development. The solicitation mandates that offerors hold a facility clearance and safeguarding clearance as specified in the DD Form 254 at time of submission and secure Top Secret/SCI clearances for designated personnel within ten days of performance commencement. Key personnel—including a Project Manager with 7 years of federal construction experience and 5 years on ICD/ICS 705 facilities, and a Superintendent with 10 years of experience—must be identified with resumes and cannot be substituted without government approval. Compliance with CMMC for handling Controlled Unclassified Information, adherence to NAVSEA packaging prohibitions, use of Wide Area Workflow for all invoicing and payment submissions, and full disclosure of organizational conflicts of interest with mitigation plans are mandatory. The evaluation process uses a tradeoff analysis with a pass/fail gate for technical approach: proposals must achieve at least an “Acceptable” rating under Factor I to be eligible, and award will be based on best value, giving primary

Commercial and Institutional Building Construction

POSTED

DEADLINE

Mechanical Fabrication

Solicitation # N6660426Q0201

This is a small business set-aside solicitation for a five-year, multiple-award Blanket Purchase Agreement (BPA) under NAICS code 332710 for mechanical fabrication services, issued as a combined synopsis and solicitation in accordance with FAR Part 12. The opportunity is for firm fixed-price contracts to fabricate build-to-print hardware for the Naval Undersea Warfare Center Division, Newport, in support of electromagnetic and undersea weapons systems. Offerors must respond to a Request for Quotation with proposals organized into three volumes covering pass-fail requirements, technical capability including facilities and manufacturing approach, and past performance. A detailed process plan for each component is not required; instead, offerors must describe their overall manufacturing approach covering production processes, test procedures, material handling, capacity, and surge capability. The BPA will be awarded on a Lowest Price Technically Acceptable basis, with all non-price factors evaluated as either Acceptable or Unacceptable, and only technically acceptable offers will be considered for award. The maximum estimated value of the BPA is $8,362,426, with individual task orders issued on an as-needed basis, each with a minimum value of $1,500, and delivery F.O.B. Newport, Rhode Island. Proposals must be submitted via email to the designated point of contact by 2:00 p.m. EST on August 11, 2026, adhering to strict formatting rules including 12-point Times New Roman font, single spacing, 1-inch margins, and submission in searchable PDF or Microsoft Office formats with no external links. Each component must be properly marked with a Unique Item Identifier if valued at or above $5,000 in accordance with DFARS 252.211-7003, and packaging must comply with MIL-STD-2073-1D, including preservation and corrosion inhibition measures. Deliverables include DD Form 250, Certificate of Compliance, Test/Inspection Reports, and Government Property Inventory Reports per specified CDRLs. Contractors must manage Government Furnished Property in accordance with FAR and DFARS clauses, safeguard Controlled Unclassified Information per DFARS 252.204-7012 and NISPOM, and ensure personnel comply with OPSEC and security protocols. The contractor’s facility must be certified under the Joint Certification Program, and all offerors must maintain an active UEI and CAGE code

POSTED

DEADLINE

Advance Notice: N6660426R3106 Code 45 Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design (TESTED) Services

Solicitation # N6660426R3106

The U.S. Navy’s NUWC Division Newport is issuing a presolicitation for Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design services under contract number N6660426R3106, with the solicitation set to be released in July 2026. This effort is designated as a Small Business Set Aside - Total, meaning only small businesses can compete, and it falls under NAICS code 541330 for Other Engineering Services. The work will involve providing engineered solutions to support system survivability, performance validation under extreme conditions, and comprehensive environmental qualification testing, ensuring military systems meet operational standards in harsh environments. All performance is expected to occur at Newport, Rhode Island, 02841. The primary point of contact for inquiries is Madison Rowland, who can be reached via email at madison.b.rowland.civ@us.navy.mil or by phone at 401-832-3648. The contract is managed under the Department of Defense, with the office located at the NUWC Division Newport facility in Rhode Island. This acquisition aims to secure qualified small business partners capable of delivering advanced testing and engineering support critical to maintaining naval system readiness and resilience. Prospective bidders should monitor the SAM.gov portal for the official solicitation, with the presolicitation notice available through the provided UI link to prepare for a competitive response.

Engineering Services

POSTED

DEADLINE