Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

High-Power DC Converter Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of eight shockproof high-power DC converters specifically designed with dual containment for mercury components, ensuring operational integrity under extreme conditions. These units must fully comply with military specifications, indicating rigorous performance, durability, and safety standards required for defense applications. The equipment is intended for use in sensitive military systems where environmental resilience and containment of hazardous materials are critical. The solicitation is issued as a subcontract under the NAICS code 335912, which classifies it within the Electrical Equipment and Appliance Manufacturing sector. It is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with a response deadline of August 17, 2026, and was posted on August 7, 2026. No set-aside provisions or specific geographic performance location are indicated, and the point of contact details are not provided in the data. Interested parties must submit proposals through the official DIBBS portal using the provided link before the deadline.

General Info

Supply eight military-spec shockproof DC converters with mercury containment for defense systems by August 17, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

335912 - Primary Battery ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 8 shockproof high-power DC converters with dual containment for mercury components, compliant with military specifications.

Similar Contracts

Same NAICS industry code

Defense-Grade Battery Cell SupplyThe contract entails the supply of defense-grade battery cells identified by NSN 6135-01-469-7574, manufactured to meet stringent military specifications ensuring reliability and performance under extreme operational conditions. Full traceability is required throughout the production and delivery process, encompassing material sourcing, manufacturing batches, and final inspection records. Each unit must be properly packaged and labeled in accordance with Department of Defense standards, including mandatory barcoding, hazard markings, and compliance documentation. All shipments must be accompanied by complete shipping papers, certificates of conformance, and any other required regulatory filings to ensure seamless acceptance by military logistics channels. This subcontract is awarded under the NAICS code 335912, reflecting its focus on battery manufacturing for defense applications, and is administered by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 7, 2026, with performance obligations tied to stringent timelines and quality controls. The place of performance and point of contact details are not specified, but delivery is expected to support global military operations. The associated DIBBS award link provides access to official procurement records, and the contractor must maintain rigorous adherence to all security, reporting, and compliance protocols mandated by federal defense contracting guidelines.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Military-Grade Storage BatteriesThe contract entails the procurement and delivery of four military-grade storage batteries, identified by NSN 6140015282975 and Part Number 1152422, to support U.S. Army operations in Poland. The supplier is required to meet all Department of Defense standards for performance, durability, and safety, ensuring the batteries are suitable for operational use in demanding environments. Proper packaging and handling protocols must be followed to safeguard the integrity of the units during transit, with full traceability required throughout the shipping process to maintain accountability and logistical transparency. This subcontract, issued under NAICS code 335912 by the Defense Logistics Agency on behalf of the Department of Defense, is slated for performance in support of U.S. military forces stationed abroad. Although specific delivery timelines and financial terms are not detailed, the contract emphasizes stringent compliance with federal military specifications and end-to-end supply chain control. The place of performance is designated for Poland, indicating the need for international logistics coordination, and the supplier must be prepared to meet all regulatory, documentation, and quality assurance requirements associated with defense procurement to ensure seamless integration into existing military systems.

Defense Logistics Agency

POSTED

DEADLINE

Solar-Powered Pumping System Supply and IntegrationThe contract entails the supply and integration of a fully autonomous solar-powered pumping system tailored to meet specific well specifications, ensuring reliable operation without manual intervention. The system must include solar panels, a charge controller, a battery bank if necessary for energy storage, a submersible pump, and a comprehensive control system—all designed to function seamlessly together in an off-grid environment. The solution must be compatible with existing well infrastructure and capable of sustained, unattended operation under varying environmental conditions, prioritizing durability and efficiency to support long-term water delivery needs. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 335912, and is being issued by the USDA Forest Service through its CSA Southwest 6 office. Interested parties must submit responses by September 1, 2026, with no solicitation number provided. The place of performance and physical location details are unspecified, suggesting the work may occur across multiple sites under the agency’s jurisdiction, likely in remote or rural areas served by the USDA. The emphasis on autonomy and compatibility indicates that proposers must demonstrate technical expertise in renewable energy systems and water extraction technologies, with proven experience in field deployments under similar constraints.

Csa Southwest 6 Usda-Fs

POSTED

DEADLINE

Supply of Solar Charging System and 12V Battery for Trailer

Cherokee Nation

POSTED

DEADLINE

Solar Charging and Power Systems for TrailersThe contract is for the design and supply of integrated solar charging systems to be deployed on trailers, requiring a complete solution that includes photovoltaic arrays, battery packs, charge controllers, and a 110 VAC backup power system. The system must be engineered to sustain full brightness operation for 72 consecutive hours without any solar input, ensuring continuous functionality under adverse conditions. The technical specifications demand a robust, self-contained power architecture that balances energy generation, storage, and reliable fallback capability. This subcontract is issued by the Washington County Board of Commissioners in Georgia under NAICS code 335912, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on August 6, 2026, with a response deadline set for September 9, 2026, at 7:00 PM Eastern Time. The system is intended for mobile applications, and the performance location is in Georgia, though specific delivery or installation addresses are not listed. There is no set-aside designation indicated, and no point of contact is provided within the published data. The official details and submission portal can be accessed through the listed state system URL.

Washington County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Drone Battery Supply (SL8-Air)

Texas A&M University

POSTED

DEADLINE

Battery Charger Supply (NSN 6130014870035)The contract involves the supply of one military-spec battery charger unit identified by NSN 6130014870035 and manufacturer part number 735X640, meeting all applicable defense production act prioritization standards and packaging requirements. Delivery is structured under FOB origin terms, meaning the responsibility for transportation and risk transfers to the buyer once the item leaves the supplier’s location. The item falls under NAICS code 335912, indicating it is related to other electrical equipment and component manufacturing. The contract is a subcontract awarded under the auspices of the Defense Logistics Agency, a division of the Department of Defense, with performance tied to the agency’s global logistics network. Although the specific delivery location and point of contact are not detailed, the contract reference links to DIBBS, indicating formal tracking and record-keeping within the Department of Defense procurement system. The solicitation was posted in August 2026, signaling it is part of an upcoming or planned procurement cycle.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Nonrechargeable Batteries (NSN 6135008264798)The contract involves the procurement and delivery of ten packages of nonrechargeable batteries that meet the National Stock Number NSN 6135008264798, ensuring full compliance with Department of Defense standards. Each package must be packaged, labeled, and identified in accordance with DoD traceability requirements to maintain accountability and operational readiness. The procurement is classified under NAICS code 335912, indicating it pertains to the manufacturing of batteries and power cells, and is structured as a subcontract under the Defense Logistics Agency, which operates within the Department of Defense. Delivery and performance are expected to align with military logistics protocols, though specific location details for performance or point of contact are not provided. The contract was posted on August 5, 2026, and can be referenced through the DIBBS system using the provided link.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Booster Heater, Dish (NSN: 7320-01-428-6487)

Defense Logistics Agency

POSTED

DEADLINE

Non-Rechargeable Battery SupplyThe contract involves the supply of non-rechargeable batteries identified by NSN 6135009857845, packaged in units of eight, and must fully comply with military specifications and Department of Defense packaging standards. These batteries are intended for critical defense applications requiring reliable, long-term power in operational environments where recharging is impractical or impossible. The contract is structured as a subcontract under the NAICS code 335912, which pertains to other electrical equipment and component manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 5, 2026, with no specified set-aside classification, indicating it is open to all eligible contractors. Performance and delivery obligations are aligned with DoD requirements, though specific delivery locations and primary points of contact are not provided in the available data. The contract reference number links to official DLA records for award and delivery tracking.

Defense Logistics Agency

POSTED

DEADLINE

Battery Power Supply Manufacturing and SupplyThe contract involves the manufacturing and supply of defense-grade Battery Power Supply units designated by NSN 6130-01-475-5321, with orders placed in quantities ranging from one to twenty-five units per delivery. Delivery timelines are fixed at thirty to forty-five days after receipt of order, and pricing is established as firm-fixed, ensuring cost certainty for both parties. The work falls under NAICS code 335912, indicating classification within the electrical equipment manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, a component of the Department of Defense. The contract is publicly accessible through a DIBBS portal link, reflecting its official procurement status, although no specific point of contact, place of performance, or set-aside details are provided in the data.

Defense Logistics Agency

POSTED

DEADLINE

Non-Rechargeable Battery Supply (BA-5390/U)The contract entails the supply of ten packages of military-grade BA-5390/U non-rechargeable batteries, each requiring strict compliance with military specifications for packaging, labeling, and documentation to ensure operational readiness and accountability. The delivery must be traceable and directed to Fort Polk, Louisiana, with all materials meeting stringent defense standards for performance, safety, and logistical handling. The contract falls under the NAICS code 335912, indicating classification within the manufacturing of other electrical equipment and components, and is issued as a subcontract under the authority of the Defense Logistics Agency within the Department of Defense. The posting date indicates this procurement was initiated in August 2026, and while specific solicitation details are not listed, the referenced contract number and delivery identifier confirm its formal status within the DLA procurement system.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

ROLL SET, ROLLER TUB

Solicitation # SPE8E5-26-T-3946

The contract pertains to the procurement of a ROLL SET, ROLLER TUB identified by NSN 3456-00-640-3671 with a quantity of four standard units, issued under solicitation SPE8E5-26-T-3946. The item must be delivered FOB origin within 136 days of contract award, with no tolerance for quantity variance, and delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including preservation methods as specified, with components packaged as a kit in a single box or multiple boxes clearly labeled as part of a set. Each box must contain an internal inventory list and adequate cushioning to prevent damage during transit. Marking, palletization, and preservation follow DLA’s detailed packaging requirements, incorporating technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition size. Transportation and shipping details are governed by DLA procedural notes C19 and C20, and the contract mandates inspection and acceptance at the destination point. The item is subject to Covered Defense Information provisions and must be handled in accordance with federal procurement protocols for defense supply chain requirements.

Machine Tool Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2040

The contract pertains to the procurement of ARMOR PLATE with NSN 9535017376339 and part number LS1155575, under solicitation SPE8E4-26-T-2040, requiring delivery of ten units within 164 days from the award date. The item is to be delivered FOB origin with no variance allowed in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The delivery address is the DDSP New Cumberland Facility in Pennsylvania, with the need ship date set for February 1, 2027, and the original required delivery date as February 5, 2027. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment since Covered Defense Information applies. All documentation and source approval submissions must follow the specified procedures, including RC001 for SAR and RQ011 for removal of government identification from non-accepted supplies. Pricing is set at $10.00 per unit for a total of $100.00, with payment terms linked to the CLIN structure. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332313, managed by the Department of Defense through the DDSP New Cumberland Facility, with Pamela Duffey as the primary point of contact.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-187B

This solicitation is for 202 check valves, identified by NSN 4820012316654 and part number 8KK352 from OSHKOSH DEFENSE LLC, designated as a critical application item. The valves must meet a thermal relief set pressure of 3000 PSI plus or minus 200 PSI with a maximum operating temperature of 180 degrees Fahrenheit. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a second containment boundary per NAVSEA 5100-003D. All packaging and marking must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200. The item is subject to destination inspection and acceptance under FAR 52.246-2, with delivery due 188 days after award at FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates over 30 Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including cybersecurity safeguards, whistleblower protections, prohibition of hexavalent chromium and covered telecommunications equipment, and NIST SP 800-171 compliance. Offerors must submit a Safety Data Sheet for any hazardous materials prior to award, or face ineligibility. This is a non-small business set-aside solicitation subject to automated award consideration and HUBZone price evaluation preference. Quotations must be submitted electronically via the DIBBS system by August 20, 2026, and payment must be processed through the WAWF system per DFARS clauses 252.232-7003 and 252.232-7006. The contract includes provisions for control of government personnel work product, restrictions on mandatory arbitration agreements, and requirements to disclose non-domestic materials.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

MODULE HYDRAULIC

Solicitation # SPE7MC-26-T-187X

The contract is for the procurement of five hydraulic modules identified by NSN 4820-01-672-7782 under solicitation SPE7MC-26-T-187X, with a response deadline of August 20, 2026, and a delivery requirement of 578 days after order. The acquisition is a total small business set-aside under NAICS code 332911, managed by the Department of Defense through the DDSP New Cumberland Facility. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Export control regulations apply to technical data associated with this item, subject to ITAR or EAR restrictions, prohibiting unauthorized disclosure to foreign persons regardless of location. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and obtain prior approval from DLA to access controlled technical data. DFARS 252.225-7048 governs compliance with these export controls, and government identification must be removed from non-accepted supplies. Primary point of contact for inquiries is Paula McClary, reachable at fmda3302@dla.mil or 614-692-0417.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-4166

This contract pertains to the procurement of four units of a Type I shelf-life item with the NSN 7690-01-463-1209 and part number LAT-27-361-1, supplied by Brady United States. The item has a non-extendable shelf life of 24 months and must be marked in accordance with MIL-STD-129, including the special marking code 32 indicating its shelf-life status. All packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, specifying preservative methods, unit containers, and palletization standards. The product is classified as a critical application item and must be delivered FOB origin within 150 days of contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania, as the final delivery point. The contract is issued under solicitation SPE8E6-26-T-4166 with a required ship date of January 18, 2027, and an original delivery deadline of August 27, 2026. The unit of issue is the individual (EA), priced at $4.00 per unit for a total of $16.00. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with revisions controlled based on acquisition size and amendment dates. Transportation and shipping logistics follow specific DLA procedures, and marking of all items must adhere strictly to MIL-STD-129. The procurement falls under NAICS code 323117 and is managed by the Department of Defense through the DDSP New Cumberland Facility, with Nicholas Mahoney as the primary point of contact.

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2039

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6349 and part number LS1155574 under solicitation SPE8E4-26-T-2039, issued by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered FOB origin within 164 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of February 5, 2027. The quantity is fixed at 10 units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, cushioning, and unit containers, and all marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and transportation details are governed by DLAD procedural notes C19 and C20. This procurement is subject to cybersecurity compliance requirements under the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, with covered defense information applicable, necessitating adherence to established cybersecurity controls. Technical and quality standards referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. Documentation requirements for source approval requests and the removal of government identification from non-accepted supplies must also be followed. The unit of issue is each (EA), priced at $10.00 per unit, totaling $100.00. The contract is classified under NAICS code 332313, and the point of contact is Pamela Duffey, with additional administrative oversight from Aaliyah Nuriddin. The procurement is managed through the DIBBS system with the official solicitation link provided.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2062

The contract specifies the procurement of 109 feet of hot rolled, annealed 440C stainless steel bar with a diameter of 0.750 inches and a length requirement of exactly 10, 11, or 12 feet in whole increments, with a reference weight of 1.500 pounds per foot. All material must meet the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and comply with applicable specifications including SAE AMS-QQ-S-763D, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling methods that do not contaminate or impair performance, and markings must be waterproof and durable. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, while tags are acceptable for wire. A Certificate of Quality Compliance, commonly known as a mill-certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Supply is restricted to manufacturers and distributors listed on the Qualified Suppliers List for Distributors (QSLD), and any bid based on non-QSLD-sourced material constitutes an exception and must be explicitly declared. Failure to comply with QSLD eligibility may result in criminal penalties in addition to civil remedies. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with special packaging codes Z and ZZ aligned to ASTM A700. Marking and packaging must adhere strictly to MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels on structural shapes and secured lifts. Delivery is FOB origin, with inspection and acceptance occurring at destination within 164 days, and a 10% variance in quantity is permitted. The shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the solicitation is governed under the federal procurement code SPE8E4-26-T-2062 with a NAICS code of 332111.

Iron and Steel Forging

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2059

The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.

Nonferrous Forging

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7MC-26-T-186V

The contract pertains to the procurement of a valve, angle, with NSN 4820-01-430-2762 and part number VA409443, under solicitation SPE7MC-26-T-186V, which is a Service-Disabled Veteran-Owned Small Business Set-Aside. The quantity required is 113 units, each priced at $113.00, for a total contract value of $12,769.00. Delivery is mandated FOB origin with a lead time of 165 days from the original required delivery date of May 18, 2027, and a need ship date of February 2, 2027. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and labeled in accordance with MIL-STD-129 with no special marking required. Inspection and acceptance occur at the destination, and quantities are fixed with zero variance allowed. All packaging and palletization must conform to DLA’s packaging requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The destination for delivery is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and the applicable revision of that list is determined by the solicitation issue date. The contracting office is the Department of Defense, managed by the DDSP New Cumberland Facility, with Paula McCLary as the primary point of contact, reachable via email and phone. The contract was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332911 for federal procurement.

Industrial Valve Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2073

The contract specifies a metal plate made of aluminum alloy 6061 in temper T651, with exact dimensions of 0.3125 inches thick, 48 inches wide, and 144 inches long, delivered in whole-foot lengths only. The item weighs approximately 212.16 pounds per piece and is identified by NSN 9535-00-231-8232, with a required quantity of nine pieces. Strict compliance with technical specifications is mandated under referenced standards including SAE AMS4027P, MIL-STD-129R, ASTM B666/B666M-20, and ASTM B660-23, with material certification required for every shipment in the form of a Certificate of Quality Compliance, which must accompany each delivery and be forwarded to the contracting officer. Continuous markings on each unit must include the DLA contract number, NSN, specification revision, alloy grade, manufacturer name, heat and lot numbers, dimensions, and temper, with only stamping or stenciling permitted as marking methods—labels required for smaller bars and tubes under 0.250 inches in diameter. The procurement is subject to the Qualified Suppliers List for Distributors (QSLD) requirement, limiting eligibility to suppliers listed on the official QSLD; any deviation must be explicitly declared and may be considered an unauthorized substitution with potential criminal penalties. Packaging must conform to MIL-STD-2073-1E, with preservation and marking following ASTM B660 and additional specified codes, and palletization governed by DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance at destination, and no quantity variance is permitted. The delivery window is 164 days, with an original required delivery date of December 5, 2026, and a need ship date of February 1, 2027, to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. Government information may be potentially classified under RD003, and technical and quality requirements are governed by DLA’s Master List, with contract data requirements such as CDRL-METALSCERT mandatory unless waived under QSL compliance conditions.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 1 hour ago

DEADLINE

LUMBER, NON-WOOD, TIMBER

Solicitation # SPE8E6-26-T-4169

The contract specifies the procurement of 800 units of LUMBER, NON-WOOD, TIMBER under NSN 5675-01-591-4344, with delivery required within 35 days after delivery order. The solicitation number is SPE8E6-26-T-4169, issued under the NAICS code 423310 and managed by the DLA New Cumberland Facility, a Department of Defense entity. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Covered Defense Information requirements may apply, indicating potential handling of sensitive data. The product must meet the exact specifications listed in the purchase item description; only those named products are considered acceptable. The primary point of contact is Tai Nguyen, reachable by phone or email for inquiries, and responses must be submitted by the deadline of August 20, 2026.

Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E4-26-T-2037

The contract pertains to the procurement of 10 units of ARMOR PLATE with NSN 9535-01-737-6312 under solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity. Delivery is required FOB origin within 164 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and the shipment must be delivered to the specified parcel post address in New Cumberland, Pennsylvania. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and applies to Covered Defense Information. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is tied to a Federal NAICS code 332313 and was posted on August 9, 2026, with responses due by August 20, 2026. The original required delivery date is February 5, 2027, with a need ship date of February 1, 2027. Point of contact for the contract is Pamela Duffey, reachable via email and phone.

Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE