Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

High Power Hollow Core Fiber and Ceramic Taper Supply

Active

Federal

Response Deadline10/22/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of high-power mounted hollow core fiber for prime contractors working on laser pulse compression projects at the SLAC National Accelerator Laboratory. The manufacturer is responsible for delivering a mounted fiber assembly compatible with a 1030 nm wavelength, 70 W average power at 40 kHz, and 1.75 mJ input pulse energy, which must include a conical ceramic protection taper. Additionally, the provider is required to submit feasibility data demonstrating the ability to achieve an output pulse duration of less than 10 fs. Managed by the Department of Energy through the SLAC National Accelerator Laboratory, the performance of this contract will take place in Menlo Park, California. The opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, falling under NAICS code 325211.

General Info

Agency

Department Of Energy → Slac National Accel Labor -Doe Contractor

NAICS

325211 - Plastics Material and Resin Manufacturing

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of Req-369233.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

High power hollow core fiber assembly for laser pulse compression

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 12:00:00 AM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-power mounted hollow core fiber for prime contractors on SLAC National Accelerator Laboratory laser pulse compression projects. Manufactures fiber compatible with 1030 nm wavelength, 1.75 mJ input pulse energy, and 70 W average power at 40 kHz, including a conical ceramic protection taper. Must provide feasibility data for output pulse duration below 10 fs. Delivers the mounted fiber assembly.

Similar Contracts

Same NAICS industry code

Water Treatment Polymer Supplier

City of Weyburn

POSTED

about 19 hours ago

DEADLINE

Supply of MatterHackers Additive Manufacturing FilamentThis subcontract involves the supply of 23 units of MatterHackers, Inc. P/N M-S37-ADZ0 additive manufacturing filament to prime contractors supporting DLA Troop Support. The material must strictly adhere to NSN 9330-01-709-0205 specifications and comply with DLA Technical and Quality Requirements RA001, with packaging following ASTM D3951 standards. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 325211.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Nonmetallic Polymer/Rubber Material Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Raw Materials for Protective Seal Caps

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Supply of Additive Manufacturing (3D Printer) FilamentThis subcontract involves the supply of 26 units of specialized additive manufacturing printer filament for prime contractors supporting DLA supply contracts. The required material is MatterHackers, Inc. part number M-EED-KTKU, identified by NSN 9330-01-708-9943. All items must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. The contract is managed by the Department of Defense through DLA Dist San Joaquin, with the place of performance located in Tracy, California. To ensure safety and regulatory compliance, the provider must furnish Safety Data Sheets that meet Federal Standard No. 313 and 29 CFR 1910.1200(g). The procurement falls under NAICS code 325211.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

Replacement Foam Set Manufacturing and SupplyThis subcontract involves the manufacturing and supply of replacement foam sets for prime contractors fulfilling Department of Defense supply contracts. The provider is responsible for sourcing or producing foam sets that strictly adhere to NSN 6760-01-491-3430 specifications, while ensuring all packaging and quality standards comply with RP001 DLA Packaging Requirements and the RA001 Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 325211 and specifies that completed sets will be delivered via FOB Origin shipping. Performance for this agreement is centered in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

FILAMENT, ADDITIVE MANU

Solicitation # SPE8E5-27-T-0214

Solicitation SPE8E5-27-T-0214 is a fixed-price contract issued by the DLA Troop Support Construction and Equipment office for the procurement of additive manufacturing printer filament, specifically part number M-S37-ADZ0 from Matterhackers, Inc. under NSN 9330-01-709-0205. The requirement consists of 23 units with a delivery window of 167 days after receipt of order, specifying an original required delivery date of March 20, 2027, and a need ship date of April 12, 2027. Delivery is set as FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and any hazardous materials must comply with the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and registration in the System for Award Management. The procurement is conducted under the First Destination Transportation program and incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the HUBZone price evaluation preference.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

PLASTIC SHEET, PRESSURE

Solicitation # SPE8E9-27-T-0210

Solicitation SPE8E9-27-T-0210 is issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of one unit of pressure sensitive adhesive plastic sheet, identified by NSN 9330-01-144-1112. The required material is a black, coated polyester plastic sheet with a length of 50.0 yards, a width of 36.0 inches, and a thickness between 0.003 and 0.004 inches. The item must be manufactured according to the current revision of the applicable part standard. Delivery is required within 20 days after receipt of order, with shipping terms set as FOB Origin and delivery to Naval Air Station Whidbey Island in Oak Harbor, Washington. Inspection and acceptance will occur at the destination. The procurement is subject to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the use of a Type II shelf life marking code and compliance with DLA packaging requirements for procurement under RP001. Contractors must adhere to the Hazard Communication Standard for labeling hazardous materials and are encouraged to avoid plastics for wrapping and cushioning. The solicitation is open for quotes until October 26, 2026, and may be eligible for automated award. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

PLASTIC STRIP, PRESS

Solicitation # SPE8E9-27-T-0207

Solicitation SPE8E9-27-T-0207 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment MRO SVC I for the procurement of 23 rolls of pressure-sensitive adhesive-coated plastic strips. The required material is identified by NSN 9330-01-288-4346 and part number 8681HS from 3M Co. Each roll must be 36 yards long, 4 inches wide, and .014 inches thick, with a liner score slit at 1-inch intervals parallel to the length of the tape. The items must be free of asbestos and intentionally added mercury, adhering to NAVSEA 5100-003D standards. This procurement is a total small business set-aside under NAICS code 325211. Delivery is specified as FOB Destination to DLA Distribution San Diego, with a need ship date of December 18, 2026, and an original required delivery date of January 21, 2027. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and RP001, including special marking code 32 for shelf life. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 26, 2026, and must include necessary representations regarding size status and the provision of covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

TUBING, PLASTIC, SPIRAL

Solicitation # SPE8E5-27-T-0203

Solicitation SPE8E5-27-T-0203 is a fixed-price procurement issued by DLA Troop Support, Construction and Equipment for 1,163 feet of plastic spiral tubing, identified by NSN 9330-01-728-6377. The contract allows for a quantity variance of plus or minus 10 percent. Delivery is required within 167 days after the award, with a need ship date of April 12, 2027, and an original required delivery date of May 28, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA requirement RP001. Non-hazardous materials should be packaged per ASTM D3951, though DLA master list requirements take precedence. The procurement is subject to the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area Workflow system. The primary point of contact for this acquisition is Don Trachtman.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

PLASTIC STRIP, PRESSURE

Solicitation # SPE8E5-27-T-0197

Solicitation SPE8E5-27-T-0197 is a total small business set-aside issued by the Defense Logistics Agency for the procurement of 31 rolls of pressure sensitive adhesive plastic strip, identified by NSN 9330-01-428-7083. This commercial off-the-shelf item is to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with a delivery period of 167 days and a required delivery date of January 1, 2027. The procurement is governed by NAICS code 325211, and the point of contact is Don Trachtman. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with additional requirements for hazardous materials labeling under 29 CFR 1910.1200 if applicable. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key regulatory requirements include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and electronic invoicing through the Wide Area WorkFlow system. Quotations must be submitted via the DIBBS portal by October 26, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

FILAMENT, ADDITIVE MANU

Solicitation # SPE8E5-27-T-0213

Solicitation SPE8E5-27-T-0213 is a fixed-price contract issued by the Defense Logistics Agency (DLA) Dist San Joaquin for the procurement of 26 units of additive manufacturing printer filament, identified by NSN 9330-01-708-9943 and Matterhackers, Inc. part number M-EED-KTKU. The delivery is required at DLA Dist San Joaquin in Tracy, California, with an original required delivery date of March 23, 2027, and a need ship date of April 12, 2027. The contract specifies a delivery window of 167 days after receipt of order, with inspection and acceptance both occurring at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and RP001 DLA Packaging Requirements, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. Compliance with the Buy American Act and the Berry Amendment is required for quotes exceeding the micro-purchase threshold. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and adherence to various FAR and DFARS clauses regarding cybersecurity, human trafficking, and hazardous material labeling under 29 CFR 1910.1200. The solicitation falls under NAICS code 325211.

DLA DIST SAN JOAQUIN

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

Vacuum Window Mount and High-Pressure Tubing SupplyThis subcontract involves the supply of vacuum-compatible interfaces for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work includes the delivery of a vacuum window mount and stainless steel tubing assembly, both of which must be engineered to withstand a nominal maximum working pressure of at least 2.5 bar absolute. Additionally, the contract covers the provision of high-pressure upgrade components. The project is categorized under NAICS code 332710 and will be performed in Menlo Park, California. The solicitation was posted on October 14, 2026, with a response deadline set for October 22, 2026.

POSTED

DEADLINE

Precision Fiber Holder and Optical Adjustment Kit FabricationThis subcontract involves the fabrication of precision optomechanical components for prime contractors supporting laser projects at the SLAC National Accelerator Laboratory under the Department of Energy. The scope of work requires the machining of a main fiber holder kit and an optical axis height adjustment kit, both of which are critical for maintaining strict laser alignment. A key technical requirement is that the final assembly footprint must maintain a short dimension of less than 0.2 meters. The project is categorized under NAICS code 333241 and will be performed in Menlo Park, California. The contract was posted on October 14, 2026, with a response deadline of October 22, 2026. The primary deliverable consists of the completed holder and adjustment kits designed to meet the laboratory's precise specifications.

Food Product Machinery Manufacturing

POSTED

DEADLINE

High power hollow core fiber assembly for laser pulse compression

Solicitation # Req-369233

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is seeking a U.S. domestic source for a high power hollow core fiber assembly designed for second stage laser pulse compression. The required equipment includes a main fiber holder kit, stainless steel tubing, a vacuum window mount, a high power mounted fiber with a conical ceramic protection taper, an optical axis height adjustment kit, and a high pressure upgrade. The assembly must be compatible with a laser wavelength of 1030 nm, an input pulse energy of 1.75 mJ, and an average power of 70 W at a 40 kHz repetition rate, with a target output pulse duration below 10 fs. Technical specifications require the assembly to withstand a nominal maximum working pressure of at least 2.5 bar absolute and maintain a footprint with a short dimension of less than 0.2 meters. The award will be determined using the Lowest Price Technically Acceptable method, with a strong emphasis on the best lead time, as the complete assembly must ship within three months of the purchase order. Eligible offerors must be registered in the System for Award Management and provide documented evidence of feasibility regarding the target pulse duration. Payment terms are Net 30 days, and freight is FOB Destination Prepaid and Add for domestic suppliers. The procurement is governed by SLAC's Terms and Conditions for Fixed Price Commercial Supplies and Services and incorporates specific federal requirements, including the Buy American Act and various FAR clauses regarding computer software licenses and international transportation.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Solicitation # SLAC_368560_Fabrication

The SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting best and final offers for the fabrication of various Ultra-High Vacuum (UHV) components. The required items include specific quantities of clamp diamond rings, collimator lid tubes, identifying collim plates, collimator mounts, light-tight bases in various sizes, HE YAG retainers, and diode blocks. This is a product-only procurement with no on-site services permitted. Source selection will be based on the Lowest Price and Technically Acceptable (LPTA) method, with a resulting fixed-price purchase order. Technical requirements for these UHV components are stringent: EDM machining, sanding discs, grinding wheels, abrasives, sulfur-containing cutting fluids, and silicone lubricants are prohibited. Specific parts require electropolishing, and all parts must be cleaned before welding, though certain items will be cleaned at SLAC. Offerors must provide dimensional inspection reports and are required to be registered in the System for Award Management (SAM). The procurement is subject to various Federal Acquisition Regulations (FAR) and Department of Energy (DEAR) clauses, including the Buy American Act for items exceeding 15,000 dollars. Submission requirements include a Representations and Certifications Rider, acceptance of SLAC's commercial supplies and services terms, and the provision of HTS codes and ECCN where applicable. Payment terms are NET-30, and freight is FOB Destination Prepaid and Add. Quotes must be submitted to the procurement commodities team by the close of business on October 20, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

X-ray imaging detector system

Solicitation # SLAC_369006_Xray_Imaging_Detector_System

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for an X-ray imaging detector system. The required equipment includes one XRD 4343CT-F22-C-000 imaging grade digital X-ray detector, an XRD-EPS 215W power supply, and associated AC, DC, extension, and PC connection cables, along with an XRD FG(E) OPTO PCIe Frame Grabber V4. Technical requirements specify a flat-panel detector configuration with an amorphous silicon sensor, a minimum active area of 40 cm x 40 cm, a 150 micron pixel size, and applicability for hard and high-energy X-ray diffraction greater than 20 keV. This is a product-only procurement with no on-site services permitted. Quotes are due by October 16, 2026, and will be evaluated based on the Lowest Priced Technically Acceptable method and the best lead time. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals should include HTS Codes, ECCNs, and a statement regarding duties and tariffs. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses based on contract value thresholds, including specific regulations regarding equal opportunity, whistleblower rights, and export controls.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

Supermicro 1U rack-mount server assemblies

Solicitation # SLAC_368659_Supermicro_1U_Rack-mount_Server_Assemblies

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for twelve Supermicro 1U rack-mount server assemblies, model AS-1115HS-TNR. Each server must be configured with one AMD EPYC Turin 9255 CPU, 64GB of DDR5 ECC memory (2x 32GB), and a Supermicro DCMS license. Storage options include either no drive or one 240GB SATA drive, and network requirements specify either a 10GbE 4-port RJ45 or a combination of 2x SFP+ and 2x RJ45. This is a product-only procurement with no on-site services permitted. Quotes must be submitted by October 16, 2026, to Cheryl Stafford. The resulting purchase order will be a fixed-price contract with NET-30 payment terms. Source selection will be based on the Lowest Priced Technically Acceptable method and the best lead time. Domestic shipments are FOB Destination Prepaid and Add, while foreign shipments are CIP SLAC, Menlo Park, Duty Unpaid. Offerors must be registered in the System for Award Management and provide a completed Representations and Certifications Rider. Additionally, proposals must include the Harmonized Tariff Schedule code and Export Control Classification Number where applicable. Buy American Act certification is required for unit prices exceeding 15,000 dollars. While not direct Federal procurements, these subcontracts incorporate various FAR and DEAR clauses depending on the final contract value.

Electronic Computer Manufacturing

POSTED

DEADLINE

CRMF SRF Cleanroom and UPW Construction Sources Sought Notification

Solicitation # SLAC_DRAFT_RFP_369005_CRMF_Cleanroom_Construction

POSTED

DEADLINE

BL18 In-Vacuum Undulator

Solicitation # 367893(RE)

SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting proposals for the design, fabrication, assembly, tuning, and delivery of an In-Vacuum Undulator (IVU) for SSRL BL18. The project requires a U.S. domestic end item source to develop a system including a vacuum sub-system with entrance and exit taper sections, motion control, and a support frame. Technical specifications are governed by SSRL Engineering Note M927, with a reference design based on the BL17 IVU. Key technical requirements include a longitudinal envelope of 3798.3 plus or minus 2.0 mm and specific magnetic period counts depending on the magnet design. The proposal submission deadline is October 30, 2026, at 5:00 PM PDT, with all documentation directed to Ryan Enos. The requested delivery date is 19 months after receipt of order to align with an August 2028 installation window. Award will be based on the combination most advantageous to SLAC, utilizing a price/technical tradeoff and qualitative assessment of factors including past performance, technical design, and financial stability. Required submission documents include firm fixed pricing, a Quality Assurance Plan, a Dun and Bradstreet report, and various representation and certification supplements. Compliance with E-Verify and the Buy American Act is mandatory.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

Magnetic Field Shimming and Performance TuningThis subcontract involves providing specialized magnetic field shimming and performance tuning services for prime contractors on projects at the SLAC National Accelerator Laboratory in Menlo Park. The scope of work includes performing magnetic tuning, quality control, and field shimming, as well as verifying RMS phase error at minimum gap. Additionally, the contractor is responsible for measuring integral quadrupole, sextupole, and octupole multipoles utilizing field mapping equipment and Hall probes. All deliverables must strictly adhere to SSRL EN M927 performance specifications, specifically maintaining a Kmax_eff of 2.20. The final requirements for the project include the delivery of a verified magnetic array and comprehensive field plot reports. This opportunity is categorized under NAICS code 541330 and is managed through the Department of Energy.

Engineering Services

POSTED

DEADLINE

Gap Actuation and Motion Control IntegrationThis subcontract for Gap Actuation and Motion Control Integration involves the design, fabrication, and installation of gap actuation systems for prime contractors working on projects at the SLAC National Accelerator Laboratory in Menlo Park. The primary objective is to deliver a fully installed and calibrated sub-system that utilizes precision actuators, linear encoders, and motion control electronics to achieve a precise magnetic pole gap target of 6.3 mm. All work must strictly adhere to SSRL EN M927 specifications. The opportunity is managed under the Department of Energy via the SLAC National Accelerator Laboratory, with a response deadline set for October 31, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Vacuum Sub-system and Vessel FabricationThis subcontract involves the design and fabrication of vacuum vessels and components for prime contractors supporting projects at the SLAC National Accelerator Laboratory. The scope of work includes the production of vacuum sub-systems, specifically entrance and exit taper sections and integrated pumping systems, utilizing ultra-high vacuum welding and cleanroom assembly. The final deliverable is a fully designed vacuum vessel equipped with the necessary pumping systems. The contractor is required to adhere to SSRL EN M927 standards and must provide comprehensive vacuum facility capability summaries. This project is managed under the Department of Energy through the SLAC National Accelerator Laboratory, with performance taking place in Menlo Park, California. Responses for this opportunity are due by October 31, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Undulator Mechanical Structure FabricationThis subcontract for Undulator Mechanical Structure Fabrication involves the design, fabrication, and assembly of mechanical housing and support structures for prime contractors working on SLAC National Accelerator Laboratory projects. The scope of work includes conceptual and detailed mechanical design for magnet arrays, magnet keepers, and support frames, utilizing high-precision CNC machining and tight-tolerance assembly to ensure all deliverables meet the specifications outlined in SSRL Engineering Note M927. Managed by the Department of Energy through the SLAC National Accelerator Laboratory, the project is based in Menlo Park, California, under NAICS code 332710. The contract requires the final delivery of completed mechanical support frames and magnet keeper assemblies, with a response deadline set for October 31, 2026.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS