Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

High-Power Laser Diode Module Supply

Active

Federal

Response Deadline07/30/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA is seeking 36 high-power laser diode modules operating at 638 nm with a minimum output of 250 mW, each fiber-coupled and housed in the Matchbox Series form factor, designed for integration into the SCALPSS 2.0 flight payloads. Each module must include TTL modulation capability and an SMA fiber connector to ensure precise control and reliable optical delivery in space environments. The contract is structured as a subcontract with a narrow response window, closing just two days after posting on July 30, 2026, indicating urgency and tight timing for supplier submissions. The place of performance is specified as Hampton, Virginia, with the NASA Shared Services Center acting as the contracting entity under NAICS code 334418 for other electronic component manufacturing, highlighting the technical specificity and aerospace-grade requirements for the components.

General Info

NASA seeks 36 high-power 638 nm laser modules for SCALPSS 2.0, due July 30, 2026, in Hampton, Virginia.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 12:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 36 units of 638 nm, ≥250 mW, fiber-coupled laser diode modules in Matchbox Series format with TTL modulation and SMA connector for integration into SCALPSS 2.0 flight payloads.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMB

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLYThis contract pertains to the procurement of four circuit card assemblies identified by NSN 5998-00-881-0949 and part number 7104170-00 under solicitation SPE4A1-26-T-2495, with delivery required within 20 days to Fort Wainwright, Alaska. The items must conform to stringent technical, quality, and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stipulated, and quality verification levels are assigned based on attribute criticality. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The contractor must adhere to CMMC Level 2 self-assessment requirements and ensure materials meet equivalence standards for legacy specifications like MIL-S-13949, which was canceled but still guides material selection. All assemblies are to be delivered FOB origin with no variance allowed in quantity, and acceptance occurs at the destination. The point of contact for questions is Allison Hugel of the DLA, and the contract requires adherence to DLA packaging, transportation, and supply chain protocols specified in associated procedural notes.

AVIATION SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Beam Position Monitor (BPM) Major Assembly - Group B, C and DThe University of California, on behalf of Lawrence Berkeley National Laboratory (LBNL), is soliciting proposals under RFP AA-2026-08 for the fabrication, testing, and delivery of Beam Position Monitor (BPM) chassis major assemblies for Group B, C, and D components of the Advanced Light Source Upgrade (ALS-U) project. The solicitation requires offerors to supply five specific printed circuit boards—SPB2, PMB, LBL208_PMOD, FPD, and AFE Backside Board—including first article samples and two production batches totaling 130 units, with delivery timelines tied to milestone approvals such as first article inspection and hold point sign-off. Proposals must be submitted electronically by 3:00 PM Pacific Time on July 31, 2026, to Aanoop@lbl.gov and include three distinct volumes: a cover letter, a technical volume addressing performance capabilities, and a business volume containing the completed Price Proposal Schedule (Attachment A), the Required Representations and Certifications Form, and the ALS-U Quality Evaluation Survey. The solicitation emphasizes full compliance with technical documentation hosted on a designated Google Drive folder, adherence to ESD-safe packaging and handling practices, and strict traceability through serialized labeling and lot documentation per engineering drawings. This is a Total Small Business Set-Aside under FAR 19.5, with NAICS code 334418 and a size standard of 750 employees. Offerors must self-certify their small business status and, if applicable, their eligibility under other socioeconomic programs such as 8(a), WOSB, SDVOSB, or HUBZone, and must disclose any joint venture arrangements. Compliance with the Buy American Act, ITAR/EAR export controls, and federal tax certification is mandatory, along with affirmative disclosures regarding covered telecommunications equipment under FAR 52.204-26. Proposals will be evaluated based on a trade-off methodology that prioritizes technical merit—including ability to meet specifications, manufacturing capacity, quality assurance, past performance, and delivery schedule—over price, which is not the sole determining factor. Award will be made on the basis of best overall value, not necessarily to the lowest bidder. The contract includes standard clauses on proposal confidentiality and data rights, with deviations from terms requiring formal justification and risk analysis. Invoicing must be sent via email to APInvoice@lbl.gov in PDF, Word, or RTF format, and all deliveries

Berkeley National Labor - DOE Contractor

POSTED

about 18 hours ago

DEADLINE

Call For Solutions: Circuit Card Assembly (CCA) Production Support and Scalability SolutionsThe Army Contracting Command–Aberdeen Proving Ground, Tobyhanna Division, on behalf of Tobyhanna Army Depot, is issuing a Call for Solutions to identify innovative commercial methodologies, processes, and technologies that can rapidly scale Circuit Card Assembly production using existing Surface Mount Technology and through-hole component machinery. The initiative aims to close internal capability gaps by advancing design approaches, reverse engineering techniques, obsolescence management strategies, and supply chain resilience efforts to accelerate the development of essential CCA manufacturing data. Proposals must address scalable solutions that enhance production efficiency and responsiveness without requiring full-scale infrastructure overhauls. Responses must reference the solicitation number CCA_26_01 in the email subject line and adhere to submission guidelines outlined in the accompanying Call for Solutions document available in the attachments section. The solicitation is open through August 10, 2026, with questions and answers published as of July 28, 2026. The primary point of contact is Dean Berkovics, reachable via email and phone, and the place of performance is Tobyhanna, Pennsylvania. The North American Industry Classification System code associated with this effort is 334418, indicating an electronic component manufacturing context. While no contract value, evaluation criteria, delivery schedules, or detailed technical specifications are provided in the available documentation, respondents are directed to review the associated Army Open Solicitation on SAM.gov for complete structural context. All submissions must be submitted through the established channel, and no contract clauses, representations, certifications, packaging requirements, or administration data are included in the current documentation, leaving the full scope of obligations to be determined through the submission process and any attached materials referenced in the Call for Solutions.

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

about 18 hours ago

DEADLINE

SWITCH, FLOWThe contract pertains to the procurement of 43 units of a flow switch with NSN 5930-01-162-6230 under solicitation SPE7M1-26-U-4421, issued by the Department of Defense through the Maritime Supply Chain, with a total small business set-aside as the type of set-aside. The delivery must be completed within 111 days after contract award, and responses are due by July 30, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Configuration changes require formal engineering change proposals or variance requests, and any deviation must be properly documented and approved. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware or components, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The government’s identification must be removed from non-accepted supplies, and the alternate offeror must submit a complete data package including detailed information for both the primary and alternate parts, as no data is currently available on the specified item.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract pertains to the procurement of a circuit card assembly identified by part number 899D3009-3 and NSN 5998-01-541-7256, issued under solicitation SPE7M1-26-T-234W by the Department of Defense through DLA. The item is classified as a commercial off-the-shelf product and designated as a critical application item requiring strict compliance with military packaging and handling standards. The supplier must adhere to DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, with particular emphasis on electrostatic discharge and electromagnetic interference protection in accordance with MIL-PRF-81705. ESD-sensitive components necessitate the use of qualified barrier materials from manufacturers listed on QPL-81705, with Type I converted bags for both ESD and EMI protection, and Type III barrier wrap where cushioning is not otherwise specified. Physical protection of leads and terminals is mandatory to prevent damage during handling and transit, and packaging must be applied at an approved ESD protective work station. The item must be marked in full compliance with MIL-STD-129, including the special marking code 39 for ESD sensitivity, and palletization must follow DLA guidelines. The contract requires delivery of four units under the unit of issue AY, with a delivery window of 406 days from the contract award, and the specified delivery point is FOB origin. Inspection and acceptance occur at the destination facility located at the DLA Distribution New Cumberland Facility in Pennsylvania. The required ship date is September 18, 2027, with the original delivery due date set for October 14, 2026. No quantity variance is permitted, and the supplier is responsible for ensuring all packaging and preservation methods meet specifications, including the use of approved preservation materials and container types. Technical documentation may be required if ESD/EMI protection is not explicitly stated in the solicitation but the item is known to be susceptible to environmental degradation. The contract is managed under the Defense Logistics Agency’s acquisition system, with primary point of contact Ryan Snyder, and all performance and compliance obligations are governed by referenced DLA technical and quality standards incorporated by reference from the DLA Master List of Technical and Quality Requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLYThe contract is for the procurement of a single circuit card assembly identified by NSN 5998-01-111-6990, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Documentation for source approval must be submitted, and the contractor must comply with Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Packaging must adhere to DLA standards, and all items must be physically marked as specified, though government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the service customer’s direction, and no shelf life applies to this material. The alternate offeror is required to provide a complete data package including full technical data for both the primary and alternate parts, as no data is currently available. The solicitation number is SPE4A0-26-T-4059, with a response deadline of August 4, 2026, and the place of performance is Robins AFB, Georgia. The contracting office is under the Department of Defense’s Aviation Supply Chain ESO Buys, with Danita Davis listed as the primary point of contact.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ELECTRONIC COMPONENThe contract pertains to the procurement of eight electronic components identified by NSN 5998-01-525-9850 under solicitation SPE7M5-26-T-355U, issued by the Department of Defense’s Active Devices Division. Deliveries are required within 257 days from award, with performance to be performed at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 27, 2026, and responses are due by August 7, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. For simplified acquisitions, the version in effect on the solicitation issue date or award date controls; for large acquisitions, the RFP issue date revision applies unless an amendment introduces a later revision, which then becomes controlling. The alternate offeror must submit a complete data package including specifications for both the approved and alternate part. Government identification must be removed from any non-accepted supplies. Primary point of contact is Cheryl Timmons, reachable via phone and email provided.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

ELECTRONIC COMPONENThis contract specifies the procurement of a commercial electronic component, Part Number 777-2830-004, identified by NSN 5998-01-039-5857, with a quantity of 16 units to be delivered within 189 days FOB origin. The item is classified as a critical application component and is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. The supplier must ensure compliance with all referenced specifications, including the replacement of obsolete standards such as MIL-PRF-55110 and MIL-P-50884 with MIL-PRF-31032 for printed circuit boards, and must implement measures to assure material quality equivalent to the now-canceled MIL-S-13949. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications approved by NAVSEA, with additional containment requirements for portable devices containing mercury. The component is highly sensitive to electrostatic discharge (ESD) and electromagnetic interference (EMI), requiring compliance with MIL-PRF-81705 for protective packaging. ESD protection mandates the use of Type I and Type III barrier materials from qualified manufacturers listed on QPL-81705, while EMI protection requires Type I barrier material, with all handling and packaging performed at approved workstations. Physical protection of leads, terminals, and contacts is mandatory to prevent bending or breakage, using adequate cushioning even when not explicitly defined by packaging codes. Marking must adhere to MIL-STD-129 with special code 39 indicating ESD sensitivity, and preservation methods follow MIL-STD-2073-1E with code GX for dry storage. The supplier must also maintain CMMC Level 2 cybersecurity self-assessment compliance, provide documentation for source approval, and ensure all government identification is removed from non-accepted supplies. Delivery is to Tinker AFB, Oklahoma, with no tolerance for quantity variance, and the solicitation is a total small business set-aside under NAICS code 334418.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electrical Components & Subassembly SupplyDallas Area Rapid Transit is seeking subcontractors to supply critical electrical components including LED drivers, PCBs, heat sinks, lenses, and wiring harnesses for integration into lighting fixtures. The solicitation, posted on July 27, 2026, has a response deadline of July 31, 2026, and falls under NAICS code 334418 for other electronic component manufacturing. This contract is structured as a subcontract, with no set-aside designation specified, and performance is expected to support DART’s broader infrastructure initiatives. All proposed solutions must meet the technical specifications required for reliable operation in transit-related lighting systems, and bidders are expected to demonstrate capacity for consistent supply, quality control, and adherence to industry standards for electrical components used in public transportation applications.

Dallas Area Rapid Transit

POSTED

DEADLINE

PCBA (Printed Circuit Board Assembly) ManufacturingThe contract involves the fabrication and assembly of printed circuit board assemblies using surface mount and through-hole technologies to support high-reliability communication units. It requires comprehensive quality control processes including automated optical inspection, in-circuit testing, and functional testing to ensure stringent performance standards. The work is being procured under a subcontract arrangement by the Department of Defense through DLA Aviation, with the NAICS code 334418 indicating classification under other electronic component manufacturing. The solicitation was posted on July 27, 2026, and responses are due by July 29, 2026, at 7:00 PM, indicating a tight turnaround timeframe for potential suppliers. The place of performance and point of contact details are not specified, but the work must comply with federal defense manufacturing requirements for mission-critical applications.

POSTED

DEADLINE

in about 13 hours

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Technical Integration and Testing SupportThe contract requires technical integration and testing support for the incorporation of laser modules into the SCALPSS 2.0 stereo camera system, a critical component for space-based optical sensing. The work encompasses precise optical alignment, thermal vacuum testing to simulate space environmental conditions, and full flight qualification to ensure system reliability under extreme operational stresses. All activities must meet stringent NASA standards for spacecraft hardware, with performance validated through rigorous procedural checkpoints and documentation. The place of performance is designated as Hampton, Virginia, where the facilities and expertise necessary for high-fidelity environmental and optical testing are located. This subcontract is issued under the NAICS code 541715 for research and development in physical, engineering, and life sciences, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 28, 2026, indicating a highly time-sensitive procurement window. The successful contractor will be expected to deliver fully integrated and qualified laser modules ready for flight, with all testing results and compliance records maintained to NASA’s archival and audit requirements. No set-aside designation is specified, and the opportunity is open to qualified entities capable of meeting the technical, temporal, and quality demands of this mission-critical support effort.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 18 hours ago

DEADLINE

Radiation Safety Compliance and Documentation SupportThe contract requires the preparation and submission of Radiation Hazard Form 44a and CITR approval documentation necessary for the procurement and integration of laser systems into NASA flight hardware. This effort is critical to ensure compliance with radiation safety standards and to enable the authorized use of laser technologies in mission-critical aerospace systems. The work must be completed with precision to meet NASA’s stringent safety and regulatory requirements for flight hardware development. The subcontract is issued by the NASA Shared Services Center under the NAICS code 541380 and is performance-based in Hampton, Virginia, with a very short response window closing on July 30, 2026. The urgency of the deadline underscores the time-sensitive nature of integrating laser systems into ongoing or planned flight programs, where delays in documentation could impact mission timelines. All deliverables must align with NASA’s safety protocols and be submitted in a format acceptable for official review and approval by the relevant internal compliance teams.

Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

USB DC Breakout Box SupplyNASA is seeking to procure two AM-C11 USB DC Breakout Boxes to support the power and control of single-wavelength Matchbox lasers integrated into flight hardware. The procurement is structured as a subcontract with a response deadline of July 30, 2026, and was posted on July 28, 2026. The NAICS code 334511 indicates the procurement falls under the manufacturing of electronic components and boards. The place of performance is specified as Hampton, Virginia, with a zip code of 23681, aligning with NASA’s Langley Research Center operations. The contracting agency is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration, with no set-aside provisions or additional organizational classifications indicated. All work must meet the technical requirements for flight-qualified systems, ensuring compatibility and reliability in space missions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

Demonstration Case Reporting & Convergence AnalysisThe contract requires detailed documentation of the optimization process for a NASA aerospike nozzle case, focusing on convergence history, iterative design changes, and measurable performance improvements. The work must trace each design iteration with technical precision, capturing how adjustments influenced aerodynamic efficiency, thermal loads, and overall thrust characteristics, ensuring clear evidence of progress and final gains over baseline configurations. All findings must be presented in a structured format that supports reproducibility and analysis by NASA engineering teams. The performance must be delivered at Stennis Space Center with a tight turnaround, as responses are due just two days after the posting date of July 28, 2026, indicating urgency and high priority. Classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services, the effort supports NASA’s broader goals in propulsion innovation and is managed by the NASA Shared Services Center. The rapid deadline suggests the results are needed to inform upcoming test schedules or program milestones, making timely, accurate, and comprehensive reporting critical to mission readiness.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

User Manual & Technical DocumentationThe contract requires the creation of comprehensive technical documentation for new software tools, including detailed installation guides, user manuals, API references, and practical example cases to support effective adoption and integration. The deliverables must be thorough, clearly structured, and aligned with industry best practices to ensure usability by technical and non-technical stakeholders. The work is classified as a subcontract under NAICS code 541990, and the performance location is specified as Stennis Space Center with a zip code of 39529. The solicitation was posted on July 28, 2026, with a response deadline of July 30, 2026, indicating a very short turnaround for proposals. The contracting agency is the NASA Shared Services Center, part of the National Aeronautics and Space Administration, suggesting the documentation will support mission-critical or high-precision software systems used in aerospace and scientific operations.

All Other Professional, Scientific, and Technical Services

POSTED

about 18 hours ago

DEADLINE

Deep Learning Integration for Design SuggestionThe contract seeks the development of a deep learning model to generate novel nozzle geometries by leveraging historical simulation data and real-time performance feedback, aiming to optimize fluid dynamics and propulsion efficiency. The project is a subcontract under the NASA Shared Services Center, tied to the National Aeronautics and Space Administration, with performance centered at Stennis Space Center, Mississippi, 39529. The initiative falls under NAICS code 541715, indicating it is focused on research and development in physical, engineering, and life sciences. The opportunity was posted on July 28, 2026, with a response deadline of July 30, 2026, underscoring a rapid procurement timeline. The model must effectively learn from prior computational fluid dynamics simulations and adaptively refine design suggestions based on live operational data, ensuring that proposed geometries are both innovative and viable for aerospace applications.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 18 hours ago

DEADLINE

Embedded Optimization Algorithm DevelopmentThe contract involves the development and integration of advanced optimization algorithms such as genetic and gradient-based methods to enhance the design of aerospike nozzles through iterative simulation feedback. The goal is to leverage computational modeling to refine nozzle geometry and performance metrics, ensuring improved efficiency, thrust, and thermal resilience under extreme conditions typical of rocket propulsion systems. This work requires close alignment with aerospace engineering principles and high-fidelity simulation tools to generate actionable design improvements. The contract is a subcontract under NASA’s Shared Services Center, specifically designated for work at Stennis Space Center, Mississippi, with a strict response deadline of July 30, 2026, and a posting date of July 28, 2026. It falls under NAICS code 541715, which categorizes research and development in the physical, engineering, and life sciences. The project demands technical expertise in algorithmic optimization, computational fluid dynamics, and aerospace system design, with an emphasis on delivering robust, validated solutions that directly inform next-generation propulsion architectures for NASA’s mission objectives.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 18 hours ago

DEADLINE

Fitness Function & Post-Processing ToolsThe contract requires the development of scripts to extract performance metrics from computational fluid dynamics outputs and use those metrics to compute fitness scores that inform design optimization cycles. This effort is focused on automating post-processing tasks to enable efficient feedback loops in engineering design, particularly for aerospace applications where CFD data volume and complexity demand systematic analysis. The work must be performed at Stennis Space Center with a zip code of 39529 and is classified under NAICS code 541330, indicating it falls under engineering services. The opportunity is structured as a subcontract, with a very short response window, as the deadline for submission is only two days after the posting date on July 28, 2026. The contracting activity is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, signaling the high technical and operational standards expected for deliverables.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Simulation Automation & Case Management SystemThe contract seeks the development of a system to automate simulation workflows for Loci/CHEM runs, encompassing job submission, file management, monitoring, and error recovery. The solution must streamline and robustly handle the end-to-end execution of complex simulations, ensuring reliability and efficiency in high-performance computing environments. The system should be designed to reduce manual intervention, improve turnaround times, and provide comprehensive tracking and recovery mechanisms to maintain continuity during failures or anomalies. This subcontract is issued under the NAICS code 541512 for computer systems design services and is associated with the NASA Shared Services Center under the National Aeronautics and Space Administration. Performance is required at Stennis Space Center, Mississippi, with a response deadline of July 30, 2026. The solicitation was posted on July 28, 2026, indicating an accelerated timeframe for proposals. While specific technical requirements are not detailed here, the scope emphasizes automation, scalability, and system resilience tailored to NASA’s computational simulation needs.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Automated Grid Deformation Module DevelopmentThe contract calls for the development of automated software routines capable of deforming computational fluid dynamics grids in real time to match dynamic changes in aerospike nozzle geometry, ensuring accurate simulation fidelity as design parameters shift. This module must be fully integrated with the Loci/CHEM framework, a high-performance simulation platform used for advanced propulsion modeling, requiring seamless data exchange, compatibility with existing solver architectures, and robust handling of complex mesh topologies under extreme deformation conditions. The work targets a specific performance location at Stennis Space Center with a zip code of 39529, where the software will be validated against experimental and simulation benchmarks. The project is structured as a subcontract under NASA’s Shared Services Center, falling under the NAICS code 541715 for scientific research and development services. The solicitation was posted on July 28, 2026, with a strict response deadline of July 30, 2026, indicating a rapid procurement timeline typical of time-sensitive aerospace innovation efforts. While no set-aside provisions or point of contact details are provided, the contract’s focus on grid deformation in propulsion systems underscores its critical role in enabling efficient, high-fidelity analysis of next-generation rocket engines, particularly those utilizing aerospike nozzle configurations to enhance performance across altitude ranges.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 18 hours ago

DEADLINE

Technical Reporting and Data AnalysisThe contract titled Technical Reporting and Data Analysis requires the compilation and delivery of detailed technical documents including a Final Test Report, a Technical White Paper, and Monthly Status Reports, all of which must integrate data from multiple sources to provide comprehensive analysis and insights. This subcontract is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration and is classified under NAICS code 541690, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on July 28, 2026, with a strict response deadline of July 31, 2026, at 3:00 PM, leaving limited time for proposal submission. The place of performance and point of contact details are not specified, and no set-aside preferences are indicated, meaning the opportunity is open to all eligible subcontractors regardless of size or status. The work is expected to demand strong analytical capabilities, technical writing proficiency, and the ability to synthesize complex data into clear, actionable reports.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Feedstock Supply and Certification (Metal Powders)NASA Shared Services Center is seeking qualified suppliers to provide certified metal powders such as Inconel and Ti-6Al-4V for use in aerospace additive manufacturing applications. The contract requires full documentation including Certificate of Conformance, detailed chemical composition data, particle size distribution, and morphological analysis reports, all compliant with recognized aerospace additive manufacturing standards. The solicitation is classified as a subcontract under NAICS code 325998 and is open for response until July 31, 2026, with proposals due by 3:00 PM Eastern Time. All delivered materials must meet stringent quality and traceability requirements to support mission-critical aerospace components, with performance expected to align with NASA’s high-reliability manufacturing needs. The place of performance and specific delivery location are not specified, indicating flexibility but requiring vendor confirmation of logistical capabilities.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 18 hours ago

DEADLINE